[PATCH] ARM: imx: move selection between i.MX21 and i.MX27 to CPU family choice
Sascha Hauer
s.hauer at pengutronix.de
Thu Mar 3 07:11:53 EST 2011
On Wed, Mar 02, 2011 at 06:23:05PM +0100, Uwe Kleine-König wrote:
> The only use of selecting MX2-based before was to get the choice to select
> between i.MX21 and i.MX27. So better provide this choice directly.
>
> Note that this has an influence on reduced i.MX21 configs because the
> former default "MACH_MX21" for the "CPUs" choice makes MACH_MX21 not
> appear in the reduced config and so the default for "Freescale CPU family:"
> (i.e. ARCH_MX3) is used now. mx21_defconfig is adapted not to be affected
> by this problem.
Do we really want to do this? Now that we are likely to get phys/virt
runtime patching in the next merge window I'd rather do something like
this:
8<--------------------------------------
[PATCH] ARM i.MX: Allow to compile SoCs contained in arch-imx in a single kernel
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/mach-imx/Kconfig | 112 ++++++++++++++++++++++++++++++--------------
arch/arm/plat-mxc/Kconfig | 17 +------
2 files changed, 79 insertions(+), 50 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5eec099..1c6d8d5 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,8 +1,28 @@
+if ARCH_IMX
+
config IMX_HAVE_DMA_V1
bool
+# obsolete: The MACH_MX/ARCH_MX should go away once the users
+# are moved to the corresponding SOC_IMX_* in the tree
+config MACH_MX21
+ bool
+
+config MACH_MX27
+ bool
+
+config ARCH_MX25
+ bool
+
+config ARCH_MX2
+ bool
+
+config ARCH_MX1
+ bool
+
config SOC_IMX1
bool
+ select ARCH_MX1
select CPU_ARM920T
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
@@ -10,6 +30,8 @@ config SOC_IMX1
config SOC_IMX21
bool
+ select MACH_MX21
+ select ARCH_MX2
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V1
select IMX_HAVE_DMA_V1
@@ -18,6 +40,7 @@ config SOC_IMX21
config SOC_IMX25
bool
+ select ARCH_MX25
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V2
select ARCH_MXC_IOMUX_V3
@@ -25,13 +48,61 @@ config SOC_IMX25
config SOC_IMX27
bool
+ select ARCH_MX2
+ select MACH_MX27
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V1
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
-if ARCH_MX1
+config IMX_MULTI_ARCHITECTURE
+ bool "i.MX multi architecture support"
+ depends on ARM_PATCH_PHYS_VIRT
+ depends on AUTO_ZRELADDR
+
+if IMX_MULTI_ARCHITECTURE
+config ARCH_IMX_MULTI_MX1
+ select SOC_IMX1
+ bool "i.MX1 support"
+
+config ARCH_IMX_MULTI_MX21
+ select SOC_IMX21
+ bool "i.MX21 support"
+
+config ARCH_IMX_MULTI_MX25
+ select SOC_IMX25
+ bool "i.MX25 support"
+
+config ARCH_IMX_MULTI_MX27
+ select SOC_IMX27
+ bool "i.MX27 support"
+endif
+
+if !IMX_MULTI_ARCHITECTURE
+comment "enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR to get"
+comment "support for multiple i.MX Families"
+choice
+ prompt "Select i.MX CPU"
+config ARCH_IMX_HAS_MX1
+ select SOC_IMX1
+ bool "i.MX1 support"
+
+config ARCH_IMX_HAS_MX21
+ select SOC_IMX21
+ bool "i.MX21 support"
+
+config ARCH_IMX_HAS_MX25
+ select SOC_IMX25
+ bool "i.MX25 support"
+
+config ARCH_IMX_HAS_MX27
+ select SOC_IMX27
+ bool "i.MX27 support"
+endchoice
+endif
+
+if SOC_IMX1
comment "MX1 platforms:"
config MACH_MXLADS
@@ -53,33 +124,12 @@ config MACH_SCB9328
endif
-if ARCH_MX2
-
-choice
- prompt "CPUs:"
- default MACH_MX21
-
-config MACH_MX21
- bool "i.MX21 support"
- help
- This enables support for Freescale's MX2 based i.MX21 processor.
-
-config MACH_MX27
- bool "i.MX27 support"
- help
- This enables support for Freescale's MX2 based i.MX27 processor.
-
-endchoice
-
-endif
-
-if MACH_MX21
+if SOC_IMX21
comment "MX21 platforms:"
config MACH_MX21ADS
bool "MX21ADS platform"
- select SOC_IMX21
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
@@ -90,13 +140,12 @@ config MACH_MX21ADS
endif
-if ARCH_MX25
+if SOC_IMX25
comment "MX25 platforms:"
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
- select SOC_IMX25
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
@@ -110,7 +159,6 @@ config MACH_MX25_3DS
config MACH_EUKREA_CPUIMX25
bool "Support Eukrea CPUIMX25 Platform"
- select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMXDI_RTC
@@ -138,13 +186,12 @@ endchoice
endif
-if MACH_MX27
+if SOC_IMX27
comment "MX27 platforms:"
config MACH_MX27ADS
bool "MX27ADS platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
@@ -157,7 +204,6 @@ config MACH_MX27ADS
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
@@ -187,7 +233,6 @@ endchoice
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
@@ -236,7 +281,6 @@ endchoice
config MACH_MX27_3DS
bool "MX27PDK platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
@@ -253,7 +297,6 @@ config MACH_MX27_3DS
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
@@ -265,7 +308,6 @@ config MACH_IMX27_VISSTRIM_M10
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_SSI
help
@@ -274,7 +316,6 @@ config MACH_IMX27LITE
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
@@ -293,7 +334,6 @@ config MACH_PCA100
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
@@ -305,7 +345,6 @@ config MACH_MXT_TD60
config MACH_IMX27IPCAM
bool "IMX27 IPCAM platform"
- select SOC_IMX27
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
help
@@ -313,3 +352,4 @@ config MACH_IMX27IPCAM
configurations for the board and its peripherals.
endif
+endif
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 389f217..646fee6 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -8,21 +8,10 @@ choice
prompt "Freescale CPU family:"
default ARCH_MX3
-config ARCH_MX1
- bool "MX1-based"
- select SOC_IMX1
+config ARCH_IMX
+ bool "i.MX1, i.MX21, i.MX25, i.MX27 based"
help
- This enables support for systems based on the Freescale i.MX1 family
-
-config ARCH_MX2
- bool "MX2-based"
- help
- This enables support for systems based on the Freescale i.MX2 family
-
-config ARCH_MX25
- bool "MX25-based"
- help
- This enables support for systems based on the Freescale i.MX25 family
+ This enables support for systems based on the Freescale i.MX1/2 family
config ARCH_MX3
bool "MX3-based"
--
1.7.1
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list