[PATCH 6/6] ARM: imx: move mx3 support to mach-imx
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Fri Mar 4 15:51:22 EST 2011
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/Makefile | 2 +-
arch/arm/mach-imx/Kconfig | 269 ++++++++++++++++++++
arch/arm/mach-imx/Makefile | 37 +++-
arch/arm/mach-imx/Makefile.boot | 4 +
arch/arm/mach-imx/cache-l2x0.c | 56 ++++
arch/arm/{mach-mx3 => mach-imx}/clock-imx31.c | 2 +-
arch/arm/{mach-mx3 => mach-imx}/clock-imx35.c | 0
arch/arm/{mach-mx3/cpu.c => mach-imx/cpu-imx31.c} | 38 +---
arch/arm/mach-imx/cpu-imx35.c | 45 ++++
.../crm_regs.h => mach-imx/crmregs-imx31.h} | 0
arch/arm/{mach-mx3 => mach-imx}/devices-imx31.h | 0
arch/arm/{mach-mx3 => mach-imx}/devices-imx35.h | 0
arch/arm/{mach-mx3 => mach-imx}/ehci-imx31.c | 0
arch/arm/{mach-mx3 => mach-imx}/ehci-imx35.c | 0
.../eukrea_mbimxsd35-baseboard.c} | 0
arch/arm/{mach-mx3 => mach-imx}/iomux-imx31.c | 0
.../arm/{mach-mx3 => mach-imx}/mach-armadillo5x0.c | 2 +-
arch/arm/{mach-mx3 => mach-imx}/mach-bug.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-cpuimx35.c | 0
.../arm/{mach-mx3 => mach-imx}/mach-kzm_arm11_01.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-mx31_3ds.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-mx31ads.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-mx31lilly.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-mx31lite.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-mx31moboard.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-mx35_3ds.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-pcm037.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-pcm037_eet.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-pcm043.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-qong.c | 0
arch/arm/{mach-mx3 => mach-imx}/mach-vpr200.c | 0
arch/arm/mach-imx/mm-imx31.c | 66 +++++
arch/arm/mach-imx/mm-imx35.c | 63 +++++
arch/arm/{mach-mx3 => mach-imx}/mx31lilly-db.c | 0
arch/arm/{mach-mx3 => mach-imx}/mx31lite-db.c | 0
.../{mach-mx3 => mach-imx}/mx31moboard-devboard.c | 0
.../{mach-mx3 => mach-imx}/mx31moboard-marxbot.c | 0
.../{mach-mx3 => mach-imx}/mx31moboard-smartbot.c | 0
arch/arm/{mach-mx3 => mach-imx}/pcm037.h | 0
arch/arm/mach-mx3/Kconfig | 265 -------------------
arch/arm/mach-mx3/Makefile | 26 --
arch/arm/mach-mx3/Makefile.boot | 3 -
arch/arm/mach-mx3/mm.c | 141 ----------
arch/arm/plat-mxc/Kconfig | 1 -
44 files changed, 539 insertions(+), 481 deletions(-)
create mode 100644 arch/arm/mach-imx/cache-l2x0.c
rename arch/arm/{mach-mx3 => mach-imx}/clock-imx31.c (99%)
rename arch/arm/{mach-mx3 => mach-imx}/clock-imx35.c (100%)
rename arch/arm/{mach-mx3/cpu.c => mach-imx/cpu-imx31.c} (72%)
create mode 100644 arch/arm/mach-imx/cpu-imx35.c
rename arch/arm/{mach-mx3/crm_regs.h => mach-imx/crmregs-imx31.h} (100%)
rename arch/arm/{mach-mx3 => mach-imx}/devices-imx31.h (100%)
rename arch/arm/{mach-mx3 => mach-imx}/devices-imx35.h (100%)
rename arch/arm/{mach-mx3 => mach-imx}/ehci-imx31.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/ehci-imx35.c (100%)
rename arch/arm/{mach-mx3/eukrea_mbimxsd-baseboard.c => mach-imx/eukrea_mbimxsd35-baseboard.c} (100%)
rename arch/arm/{mach-mx3 => mach-imx}/iomux-imx31.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-armadillo5x0.c (99%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-bug.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-cpuimx35.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-kzm_arm11_01.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-mx31_3ds.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-mx31ads.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-mx31lilly.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-mx31lite.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-mx31moboard.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-mx35_3ds.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-pcm037.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-pcm037_eet.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-pcm043.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-qong.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mach-vpr200.c (100%)
create mode 100644 arch/arm/mach-imx/mm-imx31.c
create mode 100644 arch/arm/mach-imx/mm-imx35.c
rename arch/arm/{mach-mx3 => mach-imx}/mx31lilly-db.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mx31lite-db.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mx31moboard-devboard.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mx31moboard-marxbot.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/mx31moboard-smartbot.c (100%)
rename arch/arm/{mach-mx3 => mach-imx}/pcm037.h (100%)
delete mode 100644 arch/arm/mach-mx3/Kconfig
delete mode 100644 arch/arm/mach-mx3/Makefile
delete mode 100644 arch/arm/mach-mx3/Makefile.boot
delete mode 100644 arch/arm/mach-mx3/mm.c
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c22c1ad..63fbfca 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -155,7 +155,7 @@ machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_MX1) := imx
machine-$(CONFIG_ARCH_MX2) := imx
machine-$(CONFIG_ARCH_MX25) := imx
-machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_MX3) := imx
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_MXS) := mxs
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5eec099..d879a17 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,15 @@
config IMX_HAVE_DMA_V1
bool
+#
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX31
+ bool
+
+config ARCH_MX35
+ bool
config SOC_IMX1
bool
@@ -31,6 +41,22 @@ config SOC_IMX27
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
+config SOC_IMX31
+ bool
+ select IMX_HAVE_PLATFORM_MXC_RNGA
+ select ARCH_MXC_AUDMUX_V2
+ select ARCH_MX31
+ select MXC_AVIC
+
+config SOC_IMX35
+ bool
+ select ARCH_MXC_IOMUX_V3
+ select ARCH_MXC_AUDMUX_V2
+ select HAVE_EPIT
+ select ARCH_MX35
+ select MXC_AVIC
+
+
if ARCH_MX1
comment "MX1 platforms:"
@@ -313,3 +339,246 @@ config MACH_IMX27IPCAM
configurations for the board and its peripherals.
endif
+
+if ARCH_MX3
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+ bool "Support MX31ADS platforms"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ default y
+ help
+ Include support for MX31ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+ bool "Support Wolfson Microelectronics 1133-EV1 module"
+ depends on MACH_MX31ADS
+ depends on MFD_WM8350_I2C
+ depends on REGULATOR_WM8350
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8352_CONFIG_MODE_0
+ help
+ Include support for the Wolfson Microelectronics 1133-EV1 PMU
+ and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+ bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for mx31 based LILLY1131 modules. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+ bool "Support MX31 LITEKIT (LogicPD)"
+ select SOC_IMX31
+ select MXC_ULPI if USB_ULPI
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_RTC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for MX31 LITEKIT platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_PCM037
+ bool "Support Phytec pcm037 (i.MX31) platforms"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_MXC_W1
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for Phytec pcm037 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+ bool "Support pcm037 EET board extensions"
+ depends on MACH_PCM037
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Add support for PCM037 EET baseboard extensions. If you are using the
+ OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+ command-line parameter.
+
+config MACH_MX31_3DS
+ bool "Support MX31PDK (3DS)"
+ select SOC_IMX31
+ select MXC_DEBUG_BOARD
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for MX31PDK (3DS) platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+ bool "Make the MXC NAND driver use the in flash Bad Block Table"
+ depends on MACH_MX31_3DS
+ depends on MTD_NAND_MXC
+ help
+ Enable this if you want that the MXC NAND driver uses the in flash
+ Bad Block Table to know what blocks are bad instead of scanning the
+ entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+ bool "Support mx31moboard platforms (EPFL Mobots group)"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for mx31moboard platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_QONG
+ bool "Support Dave/DENX QongEVB-LITE platform"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Include support for Dave/DENX QongEVB-LITE platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+ bool "Support Atmark Armadillo-500 Development Base Board"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for Atmark Armadillo-500 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+ bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Include support for KZM-ARM11-01. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_BUG
+ bool "Support Buglabs BUGBase platform"
+ select SOC_IMX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ default y
+ help
+ Include support for BUGBase 1.3 platform. This includes specific
+ configurations for the board and its peripherals.
+
+comment "MX35 platforms:"
+
+config MACH_PCM043
+ bool "Support Phytec pcm043 (i.MX35) platforms"
+ select SOC_IMX35
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for Phytec pcm043 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+ bool "Support MX35PDK platform"
+ select SOC_IMX35
+ select MXC_DEBUG_BOARD
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ help
+ Include support for MX35PDK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX35
+ bool "Support Eukrea CPUIMX35 Platform"
+ select SOC_IMX35
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select MXC_ULPI if USB_ULPI
+ help
+ Include support for Eukrea CPUIMX35 platform. This includes
+ specific configurations for the board and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX35
+ default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+ bool "Eukrea MBIMXSD development board"
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_VPR200
+ bool "Support VPR200 platform"
+ select SOC_IMX35
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IPU_CORE
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ help
+ Include support for VPR200 platform. This includes specific
+ configurations for the board and its peripherals.
+
+endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index b85794d..6d51e65 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,9 +1,3 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
@@ -14,18 +8,26 @@ obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+
# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+# i.MX1 based machines
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+# i.MX25 based machines
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
@@ -37,3 +39,24 @@ obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
+
+# i.MX31 based machines
+obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
+obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
+ mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG) += mach-qong.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_BUG) += mach-bug.o
+
+# i.MX35 based machines
+obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
+obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 3953d60..ebee18b 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -13,3 +13,7 @@ initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000
zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000
params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
+
+zreladdr-$(CONFIG_ARCH_MX3) := 0x80008000
+params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
+initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c
new file mode 100644
index 0000000..69d1322
--- /dev/null
+++ b/arch/arm/mach-imx/cache-l2x0.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Sascha Hauer <s.hauer at pengutronix.de>
+ * Juergen Beisert <j.beisert at pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/hardware.h>
+
+static int mxc_init_l2x0(void)
+{
+ void __iomem *l2x0_base;
+ void __iomem *clkctl_base;
+
+ if (!cpu_is_mx31() && !cpu_is_mx35())
+ return 0;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+ clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+ if (clkctl_base != NULL) {
+ writel(0x00000515, clkctl_base + L2_MEM_VAL);
+ iounmap(clkctl_base);
+ } else {
+ pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+ }
+
+ l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+ if (IS_ERR(l2x0_base)) {
+ printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+ PTR_ERR(l2x0_base));
+ return 0;
+ }
+
+ l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+
+ return 0;
+}
+arch_initcall(mxc_init_l2x0);
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c
similarity index 99%
rename from arch/arm/mach-mx3/clock-imx31.c
rename to arch/arm/mach-imx/clock-imx31.c
index d423cac..8081f07 100644
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ b/arch/arm/mach-imx/clock-imx31.c
@@ -32,7 +32,7 @@
#include <mach/mx31.h>
#include <mach/common.h>
-#include "crm_regs.h"
+#include "crmregs-imx31.h"
#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
similarity index 100%
rename from arch/arm/mach-mx3/clock-imx35.c
rename to arch/arm/mach-imx/clock-imx35.c
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-imx/cpu-imx31.c
similarity index 72%
rename from arch/arm/mach-mx3/cpu.c
rename to arch/arm/mach-imx/cpu-imx31.c
index d1d3395..a378070 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -1,5 +1,5 @@
/*
- * MX3 CPU type detection
+ * MX31 CPU type detection
*
* Copyright (c) 2009 Daniel Mack <daniel at caiaq.de>
*
@@ -17,14 +17,12 @@
unsigned int mx31_cpu_rev;
EXPORT_SYMBOL(mx31_cpu_rev);
-struct mx3_cpu_type {
+static struct {
u8 srev;
const char *name;
const char *v;
unsigned int rev;
-};
-
-static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+} mx31_cpu_type[] __initdata = {
{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 },
{ .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
{ .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
@@ -57,33 +55,3 @@ void __init mx31_read_cpu_rev(void)
printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
}
-
-unsigned int mx35_cpu_rev;
-EXPORT_SYMBOL(mx35_cpu_rev);
-
-void __init mx35_read_cpu_rev(void)
-{
- u32 rev;
- char *srev;
-
- rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
- switch (rev) {
- case 0x00:
- mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
- srev = "1.0";
- break;
- case 0x10:
- mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
- srev = "2.0";
- break;
- case 0x11:
- mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
- srev = "2.1";
- break;
- default:
- mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
- srev = "unknown";
- }
-
- printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
-}
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
new file mode 100644
index 0000000..52b59fc
--- /dev/null
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -0,0 +1,45 @@
+/*
+ * MX35 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel at caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx35_cpu_rev;
+EXPORT_SYMBOL(mx35_cpu_rev);
+
+void __init mx35_read_cpu_rev(void)
+{
+ u32 rev;
+ char *srev;
+
+ rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+ switch (rev) {
+ case 0x00:
+ mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
+ srev = "1.0";
+ break;
+ case 0x10:
+ mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
+ srev = "2.0";
+ break;
+ case 0x11:
+ mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
+ srev = "2.1";
+ break;
+ default:
+ mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+ srev = "unknown";
+ }
+
+ printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+}
+
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-imx/crmregs-imx31.h
similarity index 100%
rename from arch/arm/mach-mx3/crm_regs.h
rename to arch/arm/mach-imx/crmregs-imx31.h
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
similarity index 100%
rename from arch/arm/mach-mx3/devices-imx31.h
rename to arch/arm/mach-imx/devices-imx31.h
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
similarity index 100%
rename from arch/arm/mach-mx3/devices-imx35.h
rename to arch/arm/mach-imx/devices-imx35.h
diff --git a/arch/arm/mach-mx3/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
similarity index 100%
rename from arch/arm/mach-mx3/ehci-imx31.c
rename to arch/arm/mach-imx/ehci-imx31.c
diff --git a/arch/arm/mach-mx3/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
similarity index 100%
rename from arch/arm/mach-mx3/ehci-imx35.c
rename to arch/arm/mach-imx/ehci-imx35.c
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
similarity index 100%
rename from arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
similarity index 100%
rename from arch/arm/mach-mx3/iomux-imx31.c
rename to arch/arm/mach-imx/iomux-imx31.c
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
similarity index 99%
rename from arch/arm/mach-mx3/mach-armadillo5x0.c
rename to arch/arm/mach-imx/mach-armadillo5x0.c
index 9f4543f..d5f4c76 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -52,7 +52,7 @@
#include <mach/ulpi.h>
#include "devices-imx31.h"
-#include "crm_regs.h"
+#include "crmregs-imx31.h"
static int armadillo5x0_pins[] = {
/* UART1 */
diff --git a/arch/arm/mach-mx3/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-bug.c
rename to arch/arm/mach-imx/mach-bug.c
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-cpuimx35.c
rename to arch/arm/mach-imx/mach-cpuimx35.c
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-kzm_arm11_01.c
rename to arch/arm/mach-imx/mach-kzm_arm11_01.c
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-mx31_3ds.c
rename to arch/arm/mach-imx/mach-mx31_3ds.c
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-mx31ads.c
rename to arch/arm/mach-imx/mach-mx31ads.c
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-mx31lilly.c
rename to arch/arm/mach-imx/mach-mx31lilly.c
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-mx31lite.c
rename to arch/arm/mach-imx/mach-mx31lite.c
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-mx31moboard.c
rename to arch/arm/mach-imx/mach-mx31moboard.c
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-mx35_3ds.c
rename to arch/arm/mach-imx/mach-mx35_3ds.c
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-pcm037.c
rename to arch/arm/mach-imx/mach-pcm037.c
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-pcm037_eet.c
rename to arch/arm/mach-imx/mach-pcm037_eet.c
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-pcm043.c
rename to arch/arm/mach-imx/mach-pcm043.c
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-qong.c
rename to arch/arm/mach-imx/mach-qong.c
diff --git a/arch/arm/mach-mx3/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
similarity index 100%
rename from arch/arm/mach-mx3/mach-vpr200.c
rename to arch/arm/mach-imx/mach-vpr200.c
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
new file mode 100644
index 0000000..86b9b45
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx31.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane at minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx31_io_desc[] __initdata = {
+ imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+ iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX31);
+ mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx31_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
+};
+
+void __init mx31_init_irq(void)
+{
+ mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+ mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports));
+}
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
new file mode 100644
index 0000000..c880e6d
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx35.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane at minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx35_io_desc[] __initdata = {
+ imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+ iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX35);
+ mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx35_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
+};
+
+void __init mx35_init_irq(void)
+{
+ mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+ mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports));
+}
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
similarity index 100%
rename from arch/arm/mach-mx3/mx31lilly-db.c
rename to arch/arm/mach-imx/mx31lilly-db.c
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
similarity index 100%
rename from arch/arm/mach-mx3/mx31lite-db.c
rename to arch/arm/mach-imx/mx31lite-db.c
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
similarity index 100%
rename from arch/arm/mach-mx3/mx31moboard-devboard.c
rename to arch/arm/mach-imx/mx31moboard-devboard.c
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
similarity index 100%
rename from arch/arm/mach-mx3/mx31moboard-marxbot.c
rename to arch/arm/mach-imx/mx31moboard-marxbot.c
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
similarity index 100%
rename from arch/arm/mach-mx3/mx31moboard-smartbot.c
rename to arch/arm/mach-imx/mx31moboard-smartbot.c
diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-imx/pcm037.h
similarity index 100%
rename from arch/arm/mach-mx3/pcm037.h
rename to arch/arm/mach-imx/pcm037.h
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
deleted file mode 100644
index df2e9da..0000000
--- a/arch/arm/mach-mx3/Kconfig
+++ /dev/null
@@ -1,265 +0,0 @@
-if ARCH_MX3
-
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
-config ARCH_MX31
- bool
-
-config ARCH_MX35
- bool
-
-config SOC_IMX31
- bool
- select IMX_HAVE_PLATFORM_MXC_RNGA
- select ARCH_MXC_AUDMUX_V2
- select ARCH_MX31
- select MXC_AVIC
-
-config SOC_IMX35
- bool
- select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX_V2
- select HAVE_EPIT
- select ARCH_MX35
- select MXC_AVIC
-
-comment "MX3 platforms:"
-
-config MACH_MX31ADS
- bool "Support MX31ADS platforms"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- default y
- help
- Include support for MX31ADS platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31ADS_WM1133_EV1
- bool "Support Wolfson Microelectronics 1133-EV1 module"
- depends on MACH_MX31ADS
- depends on MFD_WM8350_I2C
- depends on REGULATOR_WM8350
- select MFD_WM8350_CONFIG_MODE_0
- select MFD_WM8352_CONFIG_MODE_0
- help
- Include support for the Wolfson Microelectronics 1133-EV1 PMU
- and audio module for the MX31ADS platform.
-
-config MACH_PCM037
- bool "Support Phytec pcm037 (i.MX31) platforms"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_W1
- select MXC_ULPI if USB_ULPI
- help
- Include support for Phytec pcm037 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_PCM037_EET
- bool "Support pcm037 EET board extensions"
- depends on MACH_PCM037
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Add support for PCM037 EET baseboard extensions. If you are using the
- OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
- command-line parameter.
-
-config MACH_MX31LITE
- bool "Support MX31 LITEKIT (LogicPD)"
- select SOC_IMX31
- select MXC_ULPI if USB_ULPI
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_MXC_RTC
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for MX31 LITEKIT platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31_3DS
- bool "Support MX31PDK (3DS)"
- select SOC_IMX31
- select MXC_DEBUG_BOARD
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for MX31PDK (3DS) platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31_3DS_MXC_NAND_USE_BBT
- bool "Make the MXC NAND driver use the in flash Bad Block Table"
- depends on MACH_MX31_3DS
- depends on MTD_NAND_MXC
- help
- Enable this if you want that the MXC NAND driver uses the in flash
- Bad Block Table to know what blocks are bad instead of scanning the
- entire flash looking for bad block markers.
-
-config MACH_MX31MOBOARD
- bool "Support mx31moboard platforms (EPFL Mobots group)"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for mx31moboard platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX31LILLY
- bool "Support MX31 LILLY-1131 platforms (INCO startec)"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for mx31 based LILLY1131 modules. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_QONG
- bool "Support Dave/DENX QongEVB-LITE platform"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
- help
- Include support for Dave/DENX QongEVB-LITE platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_PCM043
- bool "Support Phytec pcm043 (i.MX35) platforms"
- select SOC_IMX35
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for Phytec pcm043 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_ARMADILLO5X0
- bool "Support Atmark Armadillo-500 Development Base Board"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_MMC
- select IMX_HAVE_PLATFORM_MXC_NAND
- select MXC_ULPI if USB_ULPI
- help
- Include support for Atmark Armadillo-500 platform. This includes
- specific configurations for the board and its peripherals.
-
-config MACH_MX35_3DS
- bool "Support MX35PDK platform"
- select SOC_IMX35
- select MXC_DEBUG_BOARD
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for MX35PDK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_KZM_ARM11_01
- bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
- help
- Include support for KZM-ARM11-01. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_BUG
- bool "Support Buglabs BUGBase platform"
- select SOC_IMX31
- select IMX_HAVE_PLATFORM_IMX_UART
- default y
- help
- Include support for BUGBase 1.3 platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX35
- bool "Support Eukrea CPUIMX35 Platform"
- select SOC_IMX35
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_ULPI if USB_ULPI
- help
- Include support for Eukrea CPUIMX35 platform. This includes
- specific configurations for the board and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX35
- default MACH_EUKREA_MBIMXSD35_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD35_BASEBOARD
- bool "Eukrea MBIMXSD development board"
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IPU_CORE
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
-config MACH_VPR200
- bool "Support VPR200 platform"
- select SOC_IMX35
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for VPR200 platform. This includes specific
- configurations for the board and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
deleted file mode 100644
index 15a7ff8..0000000
--- a/arch/arm/mach-mx3/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := mm.o cpu.o
-obj-$(CONFIG_SOC_IMX31) += clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += clock-imx35.o ehci-imx35.o
-obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
- mx31moboard-marxbot.o mx31moboard-smartbot.o
-obj-$(CONFIG_MACH_QONG) += mach-qong.o
-obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
-obj-$(CONFIG_MACH_BUG) += mach-bug.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
diff --git a/arch/arm/mach-mx3/Makefile.boot b/arch/arm/mach-mx3/Makefile.boot
deleted file mode 100644
index e1dd366..0000000
--- a/arch/arm/mach-mx3/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y := 0x80008000
-params_phys-y := 0x80000100
-initrd_phys-y := 0x80800000
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
deleted file mode 100644
index 54d7174..0000000
--- a/arch/arm/mach-mx3/mm.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane at minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/gpio.h>
-#include <mach/irqs.h>
-
-#ifdef CONFIG_SOC_IMX31
-static struct map_desc mx31_io_desc[] __initdata = {
- imx_map_entry(MX31, X_MEMC, MT_DEVICE),
- imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
- iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX31);
- mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-static struct mxc_gpio_port imx31_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
- DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
- DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
-};
-
-void __init mx31_init_irq(void)
-{
- mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
- mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports));
-}
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-static struct map_desc mx35_io_desc[] __initdata = {
- imx_map_entry(MX35, X_MEMC, MT_DEVICE),
- imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
- iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
-void __init imx35_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-}
-
-static struct mxc_gpio_port imx35_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
- DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
- DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
-};
-
-void __init mx35_init_irq(void)
-{
- mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
- mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports));
-}
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_CACHE_L2X0
-static int mxc_init_l2x0(void)
-{
- void __iomem *l2x0_base;
- void __iomem *clkctl_base;
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value
- */
-#define L2_MEM_VAL 0x10
-
- clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
- if (clkctl_base != NULL) {
- writel(0x00000515, clkctl_base + L2_MEM_VAL);
- iounmap(clkctl_base);
- } else {
- pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
- }
-
- l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (IS_ERR(l2x0_base)) {
- printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
- PTR_ERR(l2x0_base));
- return 0;
- }
-
- l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-
- return 0;
-}
-
-arch_initcall(mxc_init_l2x0);
-#endif
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b0cb425..8d183c5 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -47,7 +47,6 @@ config ARCH_MX5
endchoice
source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-mx3/Kconfig"
source "arch/arm/mach-mxc91231/Kconfig"
source "arch/arm/mach-mx5/Kconfig"
--
1.7.2.3
More information about the linux-arm-kernel
mailing list