[PATCH 0/8] macb: add support for Cadence GEM
Jamie Iles
jamie at jamieiles.com
Thu Mar 10 05:10:35 EST 2011
This patch series extends the Atmel MACB driver to support the Cadence
GEM (Gigabit Ethernet MAC) to support 10/100 operation. The GEM is
based on the MACB block but has a few moved registers and bitfields.
This patch series attempts to use the MACB accessors where block
functionallity is identical and only overrides to GEM specific
acccessors when needed.
This has been runtested on a board with a Cadence GEM and compile tested
for all at91 configurations and a number of avr32 configurations.
Jamie Iles (8):
macb: unify at91 and avr32 platform data
macb: detect hclk presence from platform data
macb: convert printk to pr_ and friends
macb: initial support for Cadence GEM
macb: handle HW address registers for GEM devices
macb: support higher rate GEM MDIO clock divisors
macb: support statistics for GEM devices
macb: support data bus widths > 32 bits
arch/arm/mach-at91/at572d940hf_devices.c | 6 +-
arch/arm/mach-at91/at91cap9_devices.c | 6 +-
arch/arm/mach-at91/at91rm9200_devices.c | 6 +-
arch/arm/mach-at91/at91sam9260_devices.c | 6 +-
arch/arm/mach-at91/at91sam9263_devices.c | 6 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 6 +-
arch/arm/mach-at91/board-1arm.c | 2 +-
arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
arch/arm/mach-at91/board-at572d940hf_ek.c | 2 +-
arch/arm/mach-at91/board-cam60.c | 2 +-
arch/arm/mach-at91/board-cap9adk.c | 2 +-
arch/arm/mach-at91/board-carmeva.c | 2 +-
arch/arm/mach-at91/board-cpu9krea.c | 2 +-
arch/arm/mach-at91/board-cpuat91.c | 2 +-
arch/arm/mach-at91/board-csb337.c | 2 +-
arch/arm/mach-at91/board-csb637.c | 2 +-
arch/arm/mach-at91/board-eb9200.c | 2 +-
arch/arm/mach-at91/board-ecbat91.c | 2 +-
arch/arm/mach-at91/board-eco920.c | 2 +-
arch/arm/mach-at91/board-foxg20.c | 2 +-
arch/arm/mach-at91/board-gsia18s.c | 2 +-
arch/arm/mach-at91/board-kafa.c | 2 +-
arch/arm/mach-at91/board-kb9202.c | 2 +-
arch/arm/mach-at91/board-neocore926.c | 2 +-
arch/arm/mach-at91/board-pcontrol-g20.c | 2 +-
arch/arm/mach-at91/board-picotux200.c | 2 +-
arch/arm/mach-at91/board-qil-a9260.c | 2 +-
arch/arm/mach-at91/board-rm9200dk.c | 2 +-
arch/arm/mach-at91/board-rm9200ek.c | 2 +-
arch/arm/mach-at91/board-sam9-l9260.c | 2 +-
arch/arm/mach-at91/board-sam9260ek.c | 2 +-
arch/arm/mach-at91/board-sam9263ek.c | 2 +-
arch/arm/mach-at91/board-sam9g20ek.c | 2 +-
arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +-
arch/arm/mach-at91/board-snapper9260.c | 2 +-
arch/arm/mach-at91/board-stamp9g20.c | 2 +-
arch/arm/mach-at91/board-usb-a9260.c | 2 +-
arch/arm/mach-at91/board-usb-a9263.c | 2 +-
arch/arm/mach-at91/board-yl-9200.c | 2 +-
arch/arm/mach-at91/include/mach/board.h | 14 +-
arch/avr32/mach-at32ap/at32ap700x.c | 2 +
arch/avr32/mach-at32ap/include/mach/board.h | 5 +-
drivers/net/Kconfig | 8 +-
drivers/net/macb.c | 294 +++++++++++++++++++--------
drivers/net/macb.h | 90 ++++++++-
include/linux/platform_data/macb.h | 17 ++
46 files changed, 381 insertions(+), 151 deletions(-)
create mode 100644 include/linux/platform_data/macb.h
--
1.7.4
More information about the linux-arm-kernel
mailing list