June 2011 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Jun 1 01:00:42 EDT 2011
Ending: Thu Jun 30 23:35:41 EDT 2011
Messages: 3884

• [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support   Arnaud Patard (Rtp)
• [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support   Arnaud Patard (Rtp)
• [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support   Arnaud Patard (Rtp)
• [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Arnaud Patard (Rtp)
• [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Arnaud Patard (Rtp)
• [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Arnaud Patard (Rtp)
• [PATCH] plat-iop: fix build error   Arnaud Patard (Rtp)
• [PATCH v3 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Arnaud Patard (Rtp)
• [PATCHv7] ARM: mx51: Add support for low power suspend on MX51   Arnaud Patard (Rtp)
• [PATCHv7] ARM: mx51: Add support for low power suspend on MX51   Arnaud Patard (Rtp)
• [patch 1/3] efikasb/mx: fix usbh1 initialisation   Arnaud Patard (Rtp)
• [patch 2/3] efikasb: fix gpio keys.   Arnaud Patard (Rtp)
• [patch 3/3] efika: Fix board id detection   Arnaud Patard (Rtp)
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• Mark Abbate wants to chat   Mark Abbate
• [PATCH] ARM: EXYNOS4: Fix incorrect mapping of gpio pull-up macro to register setting   Thomas Abraham
• [PATCH] ARM: S5PV210: Fix build breakage due to renaming of S3C_VA_USB_HSPHY   Thomas Abraham
• [PATCH 0/9] Add clkdev support for Samsung platforms   Thomas Abraham
• [PATCH 1/9] serial: samsung: Fix unintended usage of uart port 0 as console   Thomas Abraham
• [PATCH 2/9] serial: Remove redundant console_initcall from s3c and s5p console drivers   Thomas Abraham
• [PATCH 3/9] ARM: SAMSUNG: Add clkdev infrastructure   Thomas Abraham
• [PATCH 4/9] ARM: S3C24XX: Add clkdev support   Thomas Abraham
• [PATCH 5/9] ARM: S3C64XX: Add clkdev support   Thomas Abraham
• [PATCH 6/9] ARM: S5P64X0: Add clkdev support   Thomas Abraham
• [PATCH 7/9] ARM: S5PC100: Add clkdev support   Thomas Abraham
• [PATCH 8/9] ARM: S5PV210: Add clkdev support   Thomas Abraham
• [PATCH 9/9] ARM: Exynos4: Add clkdev support   Thomas Abraham
• [PATCH 0/6] Add basic device tree support for Samsung's Exynos4 platform   Thomas Abraham
• [PATCH 1/6] serial: samsung: Keep a copy of platform data in driver's private data   Thomas Abraham
• [PATCH 2/6] serial: samsung: Add device tree support for s5pv210 uart driver   Thomas Abraham
• [PATCH 3/6] watchdog: s3c2410: Add support for device tree based probe   Thomas Abraham
• [PATCH 4/6] mmc: sdhci-s3c: Add support for device tree based probe   Thomas Abraham
• [PATCH 5/6] arm: dts: Add nodes in smdkv310 device tree source file   Thomas Abraham
• [PATCH 6/6] arm: exynos4: Add a new Exynos4 device tree enabled machine   Thomas Abraham
• [PATCH 1/6] serial: samsung: Keep a copy of platform data in driver's private data   Thomas Abraham
• [PATCH 2/6] serial: samsung: Add device tree support for s5pv210 uart driver   Thomas Abraham
• [PATCH 6/6] arm: exynos4: Add a new Exynos4 device tree enabled machine   Thomas Abraham
• [PATCH 2/6] serial: samsung: Add device tree support for s5pv210 uart driver   Thomas Abraham
• [PATCH 2/6] serial: samsung: Add device tree support for s5pv210 uart driver   Thomas Abraham
• [PATCH] ARM: exynos4: fix secondary CPU boot on early SoC revision=   Angus Ainslie
• [PATCH] ARM: exynos4: fix secondary CPU boot   Angus Ainslie
• [PATCH 2/2] ARM:mach-mx5/board-mx53_loco: Add CD and WP GPIOs   Silva Andre-B22958
• [PATCH] ARM: mach-mx5/mx53_ard: Add gpio_keys support   Daiane Angolini
• [PATCH] omap: iommu: fix pte attributes for super section   Anna, Suman
• [RFC,PATCH] Cleanup PC parallel port Kconfig   H. Peter Anvin
• [RFC,PATCH] Cleanup PC parallel port Kconfig   H. Peter Anvin
• [RFC,PATCH] Cleanup PC parallel port Kconfig   H. Peter Anvin
• [RFC,PATCH] Cleanup PC parallel port Kconfig   H. Peter Anvin
• [RFC,PATCH] Cleanup PC parallel port Kconfig   H. Peter Anvin
• [RFC,PATCH] Cleanup PC parallel port Kconfig   H. Peter Anvin
• [RFC,PATCH] Cleanup PC parallel port Kconfig   H. Peter Anvin
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   H. Peter Anvin
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   H. Peter Anvin
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   H. Peter Anvin
• [PATCH 1/2] omap4: hwmod: Reset i2c modules as a part of omap_hwmod init   Avinash.H.M
• [PATCH v5 2/2] OMAP: hwmod: fix the i2c-reset timeout during bootup   Avinash.H.M
• [PATCH v4] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Avinash.H.M.
• [PATCH v4] OMAP2/3: hwmod: fix the i2c-reset timeout during bootup   Avinash.H.M.
• [PATCH 0/1] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
• [PATCH 1/1] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
• [PATCH 1/1] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
• [PATCH] PCI: Make the struct pci_dev * argument of pci_fixup_irqs const.   Ralf Baechle
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Ralf Baechle
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Ralf Baechle
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Ralf Baechle
• [PATCH] NET: AX88796: Tighten up Kconfig dependencies   Ralf Baechle
• [PATCH v2] NET: AX88796: Tighten up Kconfig dependencies   Ralf Baechle
• [PATCH 1/2] cleanup regulator supply definitions in mach-omap2 to use REGULATOR_SUPPLY   Felipe Balbi
• [PATCH 2/2] Remove old-style supply.dev assignments common in hsmmc init   Felipe Balbi
• [PATCH 1/2] cleanup regulator supply definitions in mach-omap2 to use REGULATOR_SUPPLY   Felipe Balbi
• [PATCH 1/2] cleanup regulator supply definitions in mach-omap2 to use REGULATOR_SUPPLY   Felipe Balbi
• [PATCH 1/2] cleanup regulator supply definitions in mach-omap2   Felipe Balbi
• [PATCH 2/2] Remove old-style supply.dev assignments common in hsmmc init   Felipe Balbi
• [PATCH] arm: omap: mark dt_compat __initconst   Felipe Balbi
• [PATCH 3.0-rc2] OMAP: ams-delta: fix broken uevent sysfs entries   Felipe Balbi
• [PATCH 3.0-rc2] OMAP: ams-delta: fix broken uevent sysfs entries   Felipe Balbi
• [RESEND PATCH 0/2] ARM IRQ Kconfig patches   Felipe Balbi
• [RESEND PATCH 1/2] arm: Kconfig: select correct HAVE_SPARSE_IRQ symbol   Felipe Balbi
• [RESEND PATCH 2/2] arm: Kconfig: allow OMAP to use sparse IRQ numbering   Felipe Balbi
• [PATCH 3.0-rc2] OMAP: ams-delta: fix broken uevent sysfs entries   Felipe Balbi
• [RESEND PATCH 0/2] ARM IRQ Kconfig patches   Felipe Balbi
• [RESEND PATCH 0/2] ARM IRQ Kconfig patches   Felipe Balbi
• [PATCH] s3c2410_udc: fix custom UDC command handling   Felipe Balbi
• [PATCH] s3c2410_udc: fix custom UDC command handling   Felipe Balbi
• [PATCH] s3c2410_udc: fix custom UDC command handling   Felipe Balbi
• [PATCH] s3c2410_udc: fix custom UDC command handling   Felipe Balbi
• [PATCH] s3c2410_udc: fix custom UDC command handling   Felipe Balbi
• [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.   Felipe Balbi
• [RFC][PATCH 1/5] USB: DWC OTG: Modification in DWC OTG driver for ARM based SoCs.   Felipe Balbi
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   Felipe Balbi
• [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.   Felipe Balbi
• [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.   Felipe Balbi
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   Felipe Balbi
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Felipe Balbi
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Felipe Balbi
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Felipe Balbi
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Felipe Balbi
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Felipe Balbi
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Felipe Balbi
• [PATCH] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Felipe Balbi
• [PATCH] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Felipe Balbi
• [PATCH] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Felipe Balbi
• [PATCHv2] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Felipe Balbi
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Felipe Balbi
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Felipe Balbi
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Felipe Balbi
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Felipe Balbi
• [PATCH 1/2] MMC: PM: add suspend/resume in atmel-mci   Felipe Balbi
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Philip Balister
• [PATCH v2 0/2] sdio: add quirk for spurious SDIO IRQ   Chris Ball
• [PATCH RESEND] omap_hsmmc: use original sg_len for dma_unmap_sg   Chris Ball
• [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Chris Ball
• [PATCH 0/3] Improve MMC error handling (3rd rev)   Chris Ball
• [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Chris Ball
• [Linaro-mm-sig] [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Jesse Barnes
• [Linaro-mm-sig] [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Jesse Barnes
• [PATCH 1/6] microblaze: move pci flag functions into asm-generic   Jesse Barnes
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Larry Bassel
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Larry Bassel
• [PATCH] OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition()   Bedia, Vaibhav
• [PATCH] [CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq   Tushar Behera
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Tushar Behera
• [PATCH 0/2] video: Make omap2 support conditional   Tushar Behera
• [PATCH 1/2] config: omap2+: force fb and dss support as built-in   Tushar Behera
• [PATCH 2/2] video: omap2: Compile omap2 support only when needed   Tushar Behera
• [PATCH 2/2] video: omap2: Compile omap2 support only when needed   Tushar Behera
• [PATCH 1/2] config: omap2+: force fb and dss support as built-in   Tushar Behera
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   Tushar Behera
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   Tushar Behera
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   Tushar Behera
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Ohad Ben-Cohen
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 2/6] omap: iovmm: generic iommu api migration   Ohad Ben-Cohen
• [RFC 0/6] iommu: generic api migration and grouping   Ohad Ben-Cohen
• [RFC 1/6] omap: iommu: generic iommu api migration   Ohad Ben-Cohen
• [RFC 1/6] omap: iommu: generic iommu api migration   Ohad Ben-Cohen
• [RFC 2/6] omap: iovmm: generic iommu api migration   Ohad Ben-Cohen
• [PATCH] omap: iovmm: s/sg_dma_len(sg)/sg->length/   Ohad Ben-Cohen
• [PATCH 0/4] drivers/iommu/ relocations   Ohad Ben-Cohen
• [PATCH 1/4] drivers: iommu: move to a dedicated folder   Ohad Ben-Cohen
• [PATCH 2/4] msm: iommu: move to drivers/iommu/   Ohad Ben-Cohen
• [PATCH 3/4] x86: amd_iommu: move to drivers/iommu/   Ohad Ben-Cohen
• [PATCH 4/4] x86: intel-iommu: move to drivers/iommu/   Ohad Ben-Cohen
• [PATCH 4/4] x86: intel-iommu: move to drivers/iommu/   Ohad Ben-Cohen
• [PATCH 0/4] drivers/iommu/ relocations   Ohad Ben-Cohen
• [PATCH 4/4] x86: intel-iommu: move to drivers/iommu/   Ohad Ben-Cohen
• [RFC 2/6] omap: iovmm: generic iommu api migration   Ohad Ben-Cohen
• [PATCH 2/4] msm: iommu: move to drivers/iommu/   Ohad Ben-Cohen
• [PATCH v2 0/4] drivers/iommu/ relocations   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: iommu: move to a dedicated folder   Ohad Ben-Cohen
• [PATCH v2 2/4] msm: iommu: move to drivers/iommu/   Ohad Ben-Cohen
• [PATCH v2 3/4] x86: amd_iommu: move to drivers/iommu/   Ohad Ben-Cohen
• [PATCH v2 4/4] x86/ia64: intel-iommu: move to drivers/iommu/   Ohad Ben-Cohen
• [PATCH v2 0/4] drivers/iommu/ relocations   Ohad Ben-Cohen
• [PATCH] OMAP4: iommu: fix clock name   Ohad Ben-Cohen
• [RFC 0/8] Introducing a generic AMP/IPC framework   Ohad Ben-Cohen
• [RFC 0/8] Introducing a generic AMP/IPC framework   Ohad Ben-Cohen
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Ohad Ben-Cohen
• [RFC 2/8] remoteproc: add omap implementation   Ohad Ben-Cohen
• [RFC 0/8] Introducing a generic AMP/IPC framework   Ohad Ben-Cohen
• [RFC 0/8] Introducing a generic AMP/IPC framework   Ohad Ben-Cohen
• [RFC 1/8] drivers: add generic remoteproc framework   Ohad Ben-Cohen
• [RFC 0/8] Introducing a generic AMP/IPC framework   Ohad Ben-Cohen
• [RFC 0/8] Introducing a generic AMP/IPC framework   Ohad Ben-Cohen
• [RFC 1/8] drivers: add generic remoteproc framework   Ohad Ben-Cohen
• [RFC 1/8] drivers: add generic remoteproc framework   Ohad Ben-Cohen
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Ohad Ben-Cohen
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Ohad Ben-Cohen
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Ohad Ben-Cohen
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Ohad Ben-Cohen
• [RFC 2/8] remoteproc: add omap implementation   Ohad Ben-Cohen
• [PATCH 5/8 v2] ARM i.MX Allow to compile together i.MX1/21/25/27   Arnd Bergmann
• [PATCH 5/8 v2] ARM i.MX Allow to compile together i.MX1/21/25/27   Arnd Bergmann
• [RFC PATCH v3 2/2] dt: add custom device creation to platform bus scan   Arnd Bergmann
• [PATCH v2 3/4] ARM: mxc: migrate mach-imx gpio driver to gpio-mxc   Arnd Bergmann
• [RFC 0/6] iommu: generic api migration and grouping   Arnd Bergmann
• [PATCH v3 1/4] mmc: support sdhci-pxav3.c   Arnd Bergmann
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   Arnd Bergmann
• [PATCH v3 3/4] ARM: mmp2: update mmp2 mmc resource   Arnd Bergmann
• [PATCH v3 0/3] provide sdhci driver for mmp2 and pxa910   Arnd Bergmann
• [RFC 0/6] iommu: generic api migration and grouping   Arnd Bergmann
• [PATCH v3 0/3] provide sdhci driver for mmp2 and pxa910   Arnd Bergmann
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   Arnd Bergmann
• [PATCH V2 1/3] drivers/pwm st_pwm: Add support for ST's Pulse Width Modulator   Arnd Bergmann
• [RFC PATCH v3 2/2] dt: add custom device creation to platform bus scan   Arnd Bergmann
• Dynamic patching in discarded sections   Arnd Bergmann
• [PATCH v4 5/5] ARM: mmp2: update mmp2_defconfig to support mmc   Arnd Bergmann
• kernel - userspace shared memory   Arnd Bergmann
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [PATCH v4 4/4] dt: add amba device creation to platform bus scan   Arnd Bergmann
• [PATCH v4 3/4] drivers/amba: create devices from device tree   Arnd Bergmann
• [PATCH v4 1/4] dt: check root nodes for match on of_platform_populate   Arnd Bergmann
• [PATCH v4 1/4] dt: check root nodes for match on of_platform_populate   Arnd Bergmann
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Arnd Bergmann
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Arnd Bergmann
• [PATCH] fb.h: ARM uses __raw_{read/write}   Arnd Bergmann
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Arnd Bergmann
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Arnd Bergmann
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Arnd Bergmann
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Arnd Bergmann
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Arnd Bergmann
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Arnd Bergmann
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Arnd Bergmann
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [RFC PATCH 11/11] arm/versatile: Add device tree support   Arnd Bergmann
• Dynamic patching in discarded sections   Arnd Bergmann
• Dynamic patching in discarded sections   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [RFC PATCH 01/16] ARM: local timers: early device probing hooks   Arnd Bergmann
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Arnd Bergmann
• [RFC PATCH 10/16] ARM: local timers: add exynos_mct driver to driver/clocksource   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [RFC PATCH 01/16] ARM: local timers: early device probing hooks   Arnd Bergmann
• [PATCH 1/3] serial/imx: add device tree support   Arnd Bergmann
• [PATCH 1/3] serial/imx: add device tree support   Arnd Bergmann
• [PATCH 2/3] net/fec: add device tree support   Arnd Bergmann
• [PATCH 2/3] net/fec: add device tree support   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• Problems with semaphores, mutexes, and atomic?   Arnd Bergmann
• Problems with semaphores, mutexes, and atomic?   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [RFC 0/8] Introducing a generic AMP/IPC framework   Arnd Bergmann
• mach-mxs pwm implementation question   Arnd Bergmann
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [RFC 0/8] Introducing a generic AMP/IPC framework   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• i.MX consolidation patches   Arnd Bergmann
• i.MX consolidation patches   Arnd Bergmann
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [RFC 0/8] Introducing a generic AMP/IPC framework   Arnd Bergmann
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Arnd Bergmann
• [PATCH 2/8] ARM: dma-mapping: implement dma_map_single on top of dma_map_page   Arnd Bergmann
• [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Arnd Bergmann
• [PATCH 5/8] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Arnd Bergmann
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Arnd Bergmann
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Arnd Bergmann
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH 1/4] davinci: psc.h: clean up indentation done using spaces   Arnd Bergmann
• [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Arnd Bergmann
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Arnd Bergmann
• [PATCH V2 0/3] Add drivers/pwm and drivers/pwm/st_pwm.c   Arnd Bergmann
• [PATCH 2/8] ARM: dma-mapping: implement dma_map_single on top of dma_map_page   Arnd Bergmann
• [PATCH 1/4] davinci: psc.h: clean up indentation done using spaces   Arnd Bergmann
• [PATCH] mach-ux500: fix USB build error   Arnd Bergmann
• [PATCH 1/2] PWM: add pwm framework support   Arnd Bergmann
• [PATCH V2 0/3] Add drivers/pwm and drivers/pwm/st_pwm.c   Arnd Bergmann
• [PATCH 2/2] pwm: Add a i.MX23/28 pwm driver   Arnd Bergmann
• [PATCH 1/2] PWM: add pwm framework support   Arnd Bergmann
• [PATCH] ARM: mach-s3c24a0: delete   Arnd Bergmann
• [PATCH] ARM: mach-s3c24a0: delete   Arnd Bergmann
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Arnd Bergmann
• [PATCH 1/2] PWM: add pwm framework support   Arnd Bergmann
• [PATCH 2/2] pwm: Add a i.MX23/28 pwm driver   Arnd Bergmann
• [PATCH 1/2] PWM: add pwm framework support   Arnd Bergmann
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Arnd Bergmann
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [GIT PULL] omap clean-up for v3.1 merge window   Arnd Bergmann
• [PATCH 2/3] ARM mxs: adjust pwm resources to what the driver expects   Arnd Bergmann
• [PATCH 3/3] pwm: Add a i.MX23/28 pwm driver   Arnd Bergmann
• [PATCH 1/3] PWM: add pwm framework support   Arnd Bergmann
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Arnd Bergmann
• [PATCH] ARM: automatically select OMAP3_PMU if we try to use perf on OMAP3   Arnd Bergmann
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Arnd Bergmann
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Arnd Bergmann
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Arnd Bergmann
• [PATCH] ARM: realview, vexpress: fix section mismatch from platform_cpu_die() to pen_release   Saeed Bishara
• [PATCH v6 1/8] MTD: Add integrator-flash feature to physmap   Artem Bityutskiy
• [PATCH v6 1/8] MTD: Add integrator-flash feature to physmap   Artem Bityutskiy
• [PATCH 0/8] clean-up NAND / BBT code, flags   Artem Bityutskiy
• [PATCH] ATMEL, AVR32: inline nand partition table access   Artem Bityutskiy
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Artem Bityutskiy
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Artem Bityutskiy
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Artem Bityutskiy
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Artem Bityutskiy
• [PATCH 2/2] mtd: drop ceiva map driver   Artem Bityutskiy
• [PATCH] MTD: pxa3xx_nand: fix nand detection issue   Artem Bityutskiy
• [PATCH] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Artem Bityutskiy
• [PATCH 1/2] MTD: pxa3xx_nand: fix nand detection issue   Artem Bityutskiy
• [PATCH 2/2] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Artem Bityutskiy
• [PATCH 1/2] MTD: pxa3xx_nand: fix nand detection issue   Artem Bityutskiy
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Artem Bityutskiy
• [PATCH 2/9] MTD: pxa3xx_nand: enable multiple chip select support   Artem Bityutskiy
• [PATCH V3 0/9] pxa3xx_nand: add two chip select support   Artem Bityutskiy
• [PATCH] mtd: OneNAND: samsung: Write DMA support   Artem Bityutskiy
• [PATCH] mtd: OneNAND: samsung: Write DMA support   Artem Bityutskiy
• [PATCH] MTD: atmel_nand: fix wrong use of 0 as NULL   Artem Bityutskiy
• [PATCH] mtd: OneNAND: samsung: Write DMA support   Artem Bityutskiy
• [PATCH 1/3] serial/imx: add device tree support   Segher Boessenkool
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   James Bottomley
• [PATCH 3/3] mach-u300: cleanup clockevent code   Stephen Boyd
• Duration of mdelay and udelay depends on MPU frequency in SMP   Stephen Boyd
• [RFC] Add Arm cpu topology definition   Stephen Boyd
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Stephen Boyd
• [RFC] Add Arm cpu topology definition   Stephen Boyd
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Stephen Boyd
• [RFC 0/8] Introducing a generic AMP/IPC framework   Stephen Boyd
• IRQS off tracer - is it useful or not?   Stephen Boyd
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Stephen Boyd
• [PATCH] arm: platsmp: Allow secondary cpu hotplug with maxcpus=1   Stephen Boyd
• [PATCH] arm: platsmp: Allow secondary cpu hotplug with maxcpus=1   Stephen Boyd
• kernel panic in spi_complete() on spitz (PXA270)   Stanislav Brabec
• kernel panic in spi_complete() on spitz (PXA270)   Stanislav Brabec
• kernel panic in spi_complete() on spitz (PXA270)   Stanislav Brabec
• kernel panic in spi_complete() on spitz (PXA270)   Stanislav Brabec
• kernel panic in spi_complete() on spitz (PXA270)   Stanislav Brabec
• [RFC 2/2] ARM:Tegra: Device Tree Support: Initialize audio card gpio's from the device tree.   Mitch Bradley
• [RFC 2/2] ARM:Tegra: Device Tree Support: Initialize audio card gpio's from the device tree.   Mitch Bradley
• [PATCH 1/3] serial/imx: add device tree support   Mitch Bradley
• [PATCH 1/3] serial/imx: add device tree support   Mitch Bradley
• [PATCH 1/3] serial/imx: add device tree support   Mitch Bradley
• [PATCH 1/3] serial/imx: add device tree support   Mitch Bradley
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Jassi Brar
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Jassi Brar
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Jassi Brar
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Jassi Brar
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Jassi Brar
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Jassi Brar
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Jassi Brar
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Jassi Brar
• [RFC] dmaengine: add new api for preparing simple slave transfer   Jassi Brar
• [PATCH 3/5] ARM: EXYNOS4: fix improper gpio configuration   Jassi Brar
• [PATCH 4/5] ARM: EXYNOS4: Add SPDIF for SMDKV310   Jassi Brar
• [PATCH 5/5] ASoC: SMDKV310: Enable SPDIF device   Jassi Brar
• [PATCH] s3c2410_udc: fix custom UDC command handling   Jassi Brar
• [PATCH] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Jassi Brar
• [PATCHv2] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Jassi Brar
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Jassi Brar
• [PATCH 0/7] ARM: SAMSUNG: Cleanup SPI platform specific code   Jassi Brar
• [PATCH 3/7] ARM: SAMSUNG: Add SPI clock definitions for SAMSUNG SoCs   Jassi Brar
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Jassi Brar
• [PATCH 0/7] ARM: SAMSUNG: Cleanup SPI platform specific code   Jassi Brar
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse   Jassi Brar
• [PATCH v2 0/7] Move Qualcomm gpio drivers into drivers dir   David Brown
• [PATCH v2 1/7] msm: gpio: Remove unsupported devices   David Brown
• [PATCH v2 2/7] msm: Remove chip-ifdefs for GPIO io mappings   David Brown
• [PATCH v2 3/7] msm: gpio: Remove chip-specific register definitions   David Brown
• [PATCH v2 4/7] msm: gpio: Remove ifdefs on gpio chip registers   David Brown
• [PATCH v2 5/7] msm: gpiomux: Move public API to public header   David Brown
• [PATCH v2 6/7] gpio_msm: Move Qualcomm v6 MSM driver into drivers   David Brown
• [PATCH v2 7/7] gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers   David Brown
• [PATCH v2 0/7] Move Qualcomm gpio drivers into drivers dir   David Brown
• [PATCH v3 0/8] Move Qualcomm gpio drivers into drivers dir   David Brown
• [PATCH v3 1/8] msm: gpio: Remove unsupported devices   David Brown
• [PATCH v3 2/8] msm: Remove chip-ifdefs for GPIO io mappings   David Brown
• [PATCH v3 3/8] msm: gpio: Remove chip-specific register definitions   David Brown
• [PATCH v3 4/8] msm: gpio: Remove ifdefs on gpio chip registers   David Brown
• [PATCH v3 5/8] msm: gpiomux: Move public API to public header   David Brown
• [PATCH v3 6/8] msm: gpio: Fold register defs into C file   David Brown
• [PATCH v3 7/8] gpio_msm: Move Qualcomm v6 MSM driver into drivers   David Brown
• [PATCH v3 8/8] gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers   David Brown
• [PATCH 0/4] drivers/iommu/ relocations   David Brown
• [PATCH 2/4] msm: iommu: move to drivers/iommu/   David Brown
• [PATCH] msm: timer: compensate for timer shift in msm_read_timer_count   David Brown
• [PATCH v2 2/4] msm: iommu: move to drivers/iommu/   David Brown
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   David Brown
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   David Brown
• [PATCH v7 09/14] ARM: msm: use remapped PPI interrupts for local timer   David Brown
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   David Brown
• [PATCH] Support multiple MEM tags with atags->fdt conversion   David Brown
• [PATCH] Support multiple MEM tags with atags->fdt conversion   David Brown
• [PATCH v2 2/4] msm: iommu: move to drivers/iommu/   David Brown
• [PATCH] Support multiple MEM tags with atags->fdt conversion   David Brown
• [stable] [PATCH v2] msm: timer: compensate for timer shift in msm_read_timer_count   David Brown
• [GIT PULL] msm fixes for 3.0-rc4   David Brown
• [PATCH 4/4] ARM: zImage: allow supplementing appended DTB with traditional ATAG data   David Brown
• [PATCH 0/4] allow DTB to be appended to the ARM zImage with ATAG conversion   David Brown
• [PATCH 4/4] ARM: zImage: allow supplementing appended DTB with traditional ATAG data   David Brown
• [PATCH 4/4] ARM: zImage: allow supplementing appended DTB with traditional ATAG data   David Brown
• [PATCH 0/5] S3C64xx updates   Mark Brown
• [PATCH 1/5] CPUFREQ/S3C64xx: Move S3C64xx CPUfreq driver into drivers/cpufreq   Mark Brown
• [PATCH 2/5] ARM: SAMSUNG: Add support for pre-sleep/post-restore gpio control   Mark Brown
• [PATCH 3/5] ARM: S3C64XX: Ensure VIC based IRQs can be resumed from   Mark Brown
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Mark Brown
• [PATCH 5/5] ARM: S3C6410: Add some lower frequencies for 800MHz base clock operation   Mark Brown
• [PATCH 1/5] CPUFREQ/S3C64xx: Move S3C64xx CPUfreq driver into drivers/cpufreq   Mark Brown
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Mark Brown
• [RFC 2/2] ARM:Tegra: Device Tree Support: Initialize audio card gpio's from the device tree.   Mark Brown
• [PATCH 1/5] CPUFREQ/S3C64xx: Move S3C64xx CPUfreq driver into drivers/cpufreq   Mark Brown
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Mark Brown
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Mark Brown
• [RFC 3/3] ARM:Tegra: Device Tree Support: Initialize from wm8903 the device tree   Mark Brown
• 3.0-rc1: alsactl restore fails on spitz   Mark Brown
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Mark Brown
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Mark Brown
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Mark Brown
• [PATCH] [CPUFREQ] S3C6410: Support 800MHz operation in cpufreq   Mark Brown
• [PATCH] ARM: S3C64XX: Refresh Cragganmore support   Mark Brown
• [PATCH 5/5] ASoC: SMDKV310: Enable SPDIF device   Mark Brown
• [PATCH 1/2] Samsung SoC ADC: use regulator (VDD for ADC).   Mark Brown
• [PATCH 1/2] Exynos4 NURI: configure regulators and PMIC   Mark Brown
• [PATCH 1/2] Samsung SoC ADC: use regulator (VDD for ADC).   Mark Brown
• [PATCH 1/2] Exynos4 NURI: configure regulators and PMIC   Mark Brown
• [PATCH 1/2] Exynos4 NURI: configure regulators and PMIC   Mark Brown
• [PATCH v2 1/5] Samsung SoC ADC: use regulator (VDD for ADC).   Mark Brown
• [PATCH v2 4/4] Exynos4 NURI: support for NTC thermistor   Mark Brown
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   Mark Brown
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   Mark Brown
• [PATCH 2/6] serial: samsung: Add device tree support for s5pv210 uart driver   Mark Brown
• Pull request for Xilinx Zynq platform support   Mark Brown
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   Mark Brown
• [PATCH 1/2] ARM: S3C64XX: Refresh Cragganmore support   Mark Brown
• [PATCH 2/2] ARM: Configure supplies for all Cragganmore regulators   Mark Brown
• [PATCH] ARM: Fix WM8915 IRQ polarity on Cragganmore   Mark Brown
• [PATCH v2 4/4] Exynos4 NURI: support for NTC thermistor   Mark Brown
• [PATCH] INPUT:Add ABS_PRESSURE input event support for touchscreen driver   Mark Brown
• [PATCH 0/2] RFC: gpio: driver-local pin configuration   Mark Brown
• [PATCH] [CPUFREQ] S3C6410: Add some lower frequencies for 800MHz base clock operation   Mark Brown
• [PATCH 1/5] ASoC: wm8731: rework power management   Mark Brown
• [PATCH 2/5] ASoC: atmel-ssc: add phybase in device structure   Mark Brown
• [PATCH 4/5] ASoC: atmel_ssc_dai/atmel-pcm: adapt to dmaengine usage   Mark Brown
• [PATCH 1/5] ASoC: wm8731: rework power management   Mark Brown
• kernel panic in spi_complete() on spitz (PXA270)   Mark Brown
• [PATCH v3 1/6] Samsung SoC ADC: use regulator (VDD for ADC).   Mark Brown
• kernel panic in spi_complete() on spitz (PXA270)   Mark Brown
• [PATCH] ep93xx-eth: convert to phylib   Lennert Buytenhek
• [PATCH,RFC] mmp clockevent handling race   Lennert Buytenhek
• [PATCH,RFC] mmp clockevent handling race   Lennert Buytenhek
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Lennert Buytenhek
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Matthieu CASTET
• [PATCH 0/2] pxa2xx viper glue code fix + trizeps irrelevant ifdef removal.   Jonathan Cameron
• [PATCH 1/2] pxa2xx viper: pcmcia - free gpios on exist rather than requesting them again.   Jonathan Cameron
• [PATCH 2/2] pxa2xx trizeps4: pcmcia remove unnecessary ifdefs   Jonathan Cameron
• [PATCH 1/2] pxa2xx viper: pcmcia - free gpios on exist rather than requesting them again.   Jonathan Cameron
• [PATCH 0/3 V2] pxa2xx pcmcia - vpac glue code fix and trizeps cleanup.   Jonathan Cameron
• [PATCH 1/3] pxa2xx vpac: pcmcia - free gpios on exist rather than requesting them again.   Jonathan Cameron
• [PATCH 2/3] pxa2xx trizeps4: pcmcia remove unnecessary ifdefs   Jonathan Cameron
• [PATCH 3/3] pxa2xx trizeps4 pcmcia: code cleanup   Jonathan Cameron
• RFC pcmcia soc_common/pcmcia_low_level: Making socket_init and socket_suspend optional   Jonathan Cameron
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Jonathan Cameron
• [PATCH 2/5] ARM: EXYNOS4: Add sclk_spdif clocks   Naveen Krishna Ch
• [PATCH 1/5] ARM: EXYNOS4: Add EPLL clock operations   Naveen Krishna Ch
• [PATCH v2 3/3] ARM: EXYNOS4: Add EPLL clock operations   Naveen Krishna Ch
• [PATCH v2 3/3] ARM: EXYNOS4: Add EPLL clock operations   Naveen Krishna Ch
• [PATCH V2 0/3] ARM: Add SPDIF support for EXYNOS4   Naveen Krishna Ch
• IRQS off tracer - is it useful or not?   Gilles Chanteperdrix
• Missing volatile in hard_smp_processor_id.   Gilles Chanteperdrix
• [PATCH] arm: mach-vt8500: add forgotten irq_data conversion   Alexey Charkov
• [PATCH 2/2] rtc: vt8500: use define instead of hardcoded value for status bit   Alexey Charkov
• [PATCH 0/5] ARM: Add SPDIF support for EXYNOS4   Naveen Krishna Chatradhi
• [PATCH 1/5] ARM: EXYNOS4: Add EPLL clock operations   Naveen Krishna Chatradhi
• [PATCH 2/5] ARM: EXYNOS4: Add sclk_spdif clocks   Naveen Krishna Chatradhi
• [PATCH 3/5] ARM: EXYNOS4: fix improper gpio configuration   Naveen Krishna Chatradhi
• [PATCH 4/5] ARM: EXYNOS4: Add SPDIF for SMDKV310   Naveen Krishna Chatradhi
• [PATCH 5/5] ASoC: SMDKV310: Enable SPDIF device   Naveen Krishna Chatradhi
• [PATCH V2 0/3] ARM: Add SPDIF support for EXYNOS4   Naveen Krishna Chatradhi
• [PATCH v2 1/3] ARM: Samsung: Move duplicate code   Naveen Krishna Chatradhi
• [PATCH v2 2/3] ARM: EXYNOS4: Add sclk_spdif clocks.   Naveen Krishna Chatradhi
• [PATCH v2 3/3] ARM: EXYNOS4: Add EPLL clock operations   Naveen Krishna Chatradhi
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Peter Chen
• Clarification on ARM V6 context switching code   Linu Cherian
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   KyongHo Cho
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   KyongHo Cho
• [Linaro-mm-sig] [RFC 0/2] ARM: DMA-mapping & IOMMU integration   KyongHo Cho
• [Linaro-mm-sig] [RFC 0/2] ARM: DMA-mapping & IOMMU integration   KyongHo Cho
• [PATCH] dma-mapping: Undefine dma_map_single(), etc if CONFIG_HAVE_DMA_ATTRS is defined   KyongHo Cho
• [Linaro-mm-sig] [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   KyongHo Cho
• [PATCH 4/8] ARM: dma-mapping: implement dma sg methods on top of generic dma ops   KyongHo Cho
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   KyongHo Cho
• [Linaro-mm-sig] [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   KyongHo Cho
• [Linaro-mm-sig] [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   KyongHo Cho
• [Linaro-mm-sig] [PATCH 8/8] ARM: dma-mapping: use alloc, mmap, free from dma_ops   KyongHo Cho
• [PATCH] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210   Chanwoo Choi
• [PATCH] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210   Chanwoo Choi
• [PATCH] arm: add Faraday SoC A320   Po-Yu Chuang
• [PATCH] arm: add Faraday SoC A320   Po-Yu Chuang
• Some questions about DRM(Direct Rendering Manager)   Rob Clark
• [PATCH] arm: fix regression in ixp4xx clocksource   Richard Cochran
• [PATCH] arm: fix regression in ixp4xx clocksource   Richard Cochran
• [PATCH] arm: fix regression in ixp4xx clocksource   Richard Cochran
• [PATCH] arm: fix regression in ixp4xx clocksource   Richard Cochran
• [PATCH] mach-ixp4xx: fix build error   Richard Cochran
• [PATCH] arm: fix regression in ixp4xx clocksource   Richard Cochran
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Felipe Contreras
• LAN9221 with Samsumg S3C2416   Thiago A. Corrêa
• linux2.6.35 porting on S3C2416 (USB Host controller driver is not comming Up.)   Thiago A. Corrêa
• [RFC PATCH] KMS support for i.MX51/53   Alan Cox
• [RFC PATCH] KMS support for i.MX51/53   Alan Cox
• [PATCH 02/10] lib: genalloc: Generic allocator improvements   Alan Cox
• [PATCH 02/10] lib: genalloc: Generic allocator improvements   Alan Cox
• [GIT PULL] scalable TWD localtimer   Colin Cross
• [PATCH] ARM: omap4: gpio: fix setting IRQWAKEN bits   Colin Cross
• [PATCH] ARM: omap4: gpio: fix setting IRQWAKEN bits   Colin Cross
• [PATCH v2 1/2] ARM: omap4: gpio: fix setting IRQWAKEN bits   Colin Cross
• [PATCH v2 2/2] ARM: omap4: gpio: add locking around calls to _set_gpio_triggering   Colin Cross
• [PATCH 0/3] CPU PM notifiers   Colin Cross
• [PATCH 1/3] ARM: Add cpu power management notifiers   Colin Cross
• [PATCH 2/3] ARM: gic: Use cpu pm notifiers to save gic state   Colin Cross
• [PATCH 3/3] ARM: vfp: Use cpu pm notifiers to save vfp state   Colin Cross
• [PATCH] ARM: gic: Allow gic arch extensions to provide irqchip flags   Colin Cross
• [PATCH] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Colin Cross
• [PATCH] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Colin Cross
• [PATCH 0/3] CPU PM notifiers   Colin Cross
• [PATCH] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Colin Cross
• [PATCH 1/3] ARM: Add cpu power management notifiers   Colin Cross
• About secondary CPU resume PC address?   Colin Cross
• [PATCH 0/3] CPU PM notifiers   Colin Cross
• [PATCH 0/3] CPU PM notifiers   Colin Cross
• [PATCH 1/2] gpio/tegra: Move Tegra gpio driver to drivers/gpio   Colin Cross
• [PATCH 1/2] gpio/tegra: Move Tegra gpio driver to drivers/gpio   Colin Cross
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Colin Cross
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Colin Cross
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Colin Cross
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Colin Cross
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Colin Cross
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Colin Cross
• [Linaro-mm-sig] [PATCH 02/10] lib: genalloc: Generic allocator improvements   Jordan Crouse
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Jordan Crouse
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Jordan Crouse
• Some questions about DRM(Direct Rendering Manager)   InKi Dae
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Magnus Damm
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Magnus Damm
• [PATCH] ARM: conditional ioremap() fix for copy_oldmem_page()   Magnus Damm
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Magnus Damm
• [PATCH v2] NET: AX88796: Tighten up Kconfig dependencies   Magnus Damm
• [PATCH 1/4] This patch adds ok2440 development board support.   Wu DaoGuang
• [PATCH 2/4] This patch fixes Makefile for mach-ok2440.c   Wu DaoGuang
• [PATCH 3/4] This patch fixed the Kconfig for mach-ok2440.c   Wu DaoGuang
• [PATCH 4/4] This patch add configuraton for ok2440 development board.   Wu DaoGuang
• [PATCH] Add ok2440 development board support.   Wu DaoGuang
• [PATCH] Add ok2440 development board support.   Wu DaoGuang
• [PATCH] INPUT:Add ABS_PRESSURE input event support for touchscreen driver   Wu DaoGuang
• Clarification on ARM V6 context switching code   Will Deacon
• using identity_mapping_add & switching MMU state - how ?   Will Deacon
• [From U-Boot] Removal of various ARM boards   Will Deacon
• [PATCH 00/11] Core support for Cortex-A5 and Cortex-A15   Will Deacon
• [PATCH 01/11] arm: Convert v7 proc infos into a common macro   Will Deacon
• [PATCH 02/11] arm: Add Cortex A5 proc info   Will Deacon
• [PATCH 03/11] ARM: hwcaps: use shifts instead of hardcoded constants   Will Deacon
• [PATCH 04/11] ARM: hwcaps: add new HWCAP defines for ARMv7-A   Will Deacon
• [PATCH 05/11] ARM: proc: reorder macro parameters for __v7_proc macro   Will Deacon
• [PATCH 06/11] ARM: cortex-a5: add HWCAP_VFPv4D16 to proc info structure   Will Deacon
• [PATCH 07/11] ARM: proc: add proc info for Cortex-A15MP using classic page tables   Will Deacon
• [PATCH 08/11] ARM: perf: remove confusing comment from v7 perf events backend   Will Deacon
• [PATCH 09/11] ARM: perf: add PMUv2 common event definitions   Will Deacon
• [PATCH 10/11] ARM: perf: add support for the Cortex-A5 PMU   Will Deacon
• [PATCH 11/11] ARM: perf: add support for the Cortex-A15 PMU   Will Deacon
• [PATCH 0/6] MMU disabling code and kexec fixes   Will Deacon
• [PATCH 1/6] ARM: l2x0: fix disabling function to avoid livelock   Will Deacon
• [PATCH 2/6] ARM: l2x0: fix invalidate-all function to avoid livelock   Will Deacon
• [PATCH 3/6] ARM: proc-v7: add definition of cpu_reset for ARMv7 cores   Will Deacon
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Will Deacon
• [PATCH 5/6] ARM: kexec: use arm_machine_reset for branching to the reboot buffer   Will Deacon
• [PATCH 6/6] ARM: stop: execute platform callback from cpu_stop code   Will Deacon
• [PATCH 09/11] ARM: perf: add PMUv2 common event definitions   Will Deacon
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Will Deacon
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Will Deacon
• [PATCH 06/11] ARM: cortex-a5: add HWCAP_VFPv4D16 to proc info structure   Will Deacon
• [PATCH 06/11] ARM: cortex-a5: add HWCAP_VFPv4D16 to proc info structure   Will Deacon
• [Patch v2 00/11] Core support for Cortex-A5 and Cortex-A15   Will Deacon
• [Patch v2 01/11] arm: Convert v7 proc infos into a common macro   Will Deacon
• [Patch v2 02/11] arm: Add Cortex A5 proc info   Will Deacon
• [Patch v2 03/11] ARM: hwcaps: use shifts instead of hardcoded constants   Will Deacon
• [Patch v2 04/11] ARM: hwcaps: add new HWCAP defines for ARMv7-A   Will Deacon
• [Patch v2 05/11] ARM: proc: reorder macro parameters for __v7_proc macro   Will Deacon
• [Patch v2 06/11] ARM: proc: add proc info for Cortex-A15MP using classic page tables   Will Deacon
• [Patch v2 07/11] ARM: vfp: add VFPv4 capability detection and populate elf_hwcap   Will Deacon
• [Patch v2 08/11] ARM: perf: remove confusing comment from v7 perf events backend   Will Deacon
• [Patch v2 09/11] ARM: perf: add PMUv2 common event definitions   Will Deacon
• [Patch v2 10/11] ARM: perf: add support for the Cortex-A5 PMU   Will Deacon
• [Patch v2 11/11] ARM: perf: add support for the Cortex-A15 PMU   Will Deacon
• [Patch v2 09/11] ARM: perf: add PMUv2 common event definitions   Will Deacon
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Will Deacon
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Will Deacon
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Will Deacon
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Will Deacon
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Will Deacon
• [PATCH v2 00/10] MMU disabling code and kexec fixes   Will Deacon
• [PATCH v2 01/10] ARM: l2x0: fix disabling function to avoid livelock   Will Deacon
• [PATCH v2 02/10] ARM: l2x0: fix invalidate-all function to avoid livelock   Will Deacon
• [PATCH v2 03/10] ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 cores   Will Deacon
• [PATCH v2 04/10] ARM: lib: add switch_stack function for safely changing stack   Will Deacon
• [PATCH v2 05/10] ARM: idmap: add header file for identity mapping functions   Will Deacon
• [PATCH v2 06/10] ARM: reset: allow kernelspace mappings to be flat mapped during reset   Will Deacon
• [PATCH v2 07/10] ARM: multi-cpu: remove arguments from CPU proc macros   Will Deacon
• [PATCH v2 08/10] ARM: reset: add reset functionality for jumping to a physical address   Will Deacon
• [PATCH v2 09/10] ARM: kexec: use arm_machine_reset for branching to the reboot buffer   Will Deacon
• [PATCH v2 10/10] ARM: stop: execute platform callback from cpu_stop code   Will Deacon
• [Patch v2 03/11] ARM: hwcaps: use shifts instead of hardcoded constants   Will Deacon
• [PATCH] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Will Deacon
• [PATCH v3 0/9] MMU disabling code and kexec fixes   Will Deacon
• [PATCH v3 1/9] ARM: l2x0: fix disabling function to avoid deadlock   Will Deacon
• [PATCH v3 2/9] ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 cores   Will Deacon
• [PATCH v3 3/9] ARM: lib: add switch_stack function for safely changing stack   Will Deacon
• [PATCH v3 4/9] ARM: idmap: add header file for identity mapping functions   Will Deacon
• [PATCH v3 5/9] ARM: reset: allow kernelspace mappings to be flat mapped during reset   Will Deacon
• [PATCH v3 6/9] ARM: multi-cpu: remove arguments from CPU proc macros   Will Deacon
• [PATCH v3 7/9] ARM: reset: add reset functionality for jumping to a physical address   Will Deacon
• [PATCH v3 8/9] ARM: kexec: use arm_machine_reset for branching to the reboot buffer   Will Deacon
• [PATCH v3 9/9] ARM: stop: execute platform callback from cpu_stop code   Will Deacon
• [RFC PATCH v2 0/5] Add generic macros for declaring various CPU structs   Will Deacon
• [RFC PATCH v2 2/5] ARM: proc-v7: Use new generic struct definition macros   Will Deacon
• [PATCH v3 00/10] Core support for Cortex-A5 and Cortex-A15   Will Deacon
• [PATCH v3 01/10] arm: Convert v7 proc infos into a common macro   Will Deacon
• [PATCH v3 02/10] arm: Add Cortex A5 proc info   Will Deacon
• [PATCH v3 03/10] ARM: hwcaps: use shifts instead of hardcoded constants   Will Deacon
• [PATCH v3 04/10] ARM: hwcaps: add new HWCAP defines for ARMv7-A   Will Deacon
• [PATCH v3 05/10] ARM: proc: add proc info for Cortex-A15MP using classic page tables   Will Deacon
• [PATCH v3 06/10] ARM: vfp: add VFPv4 capability detection and populate elf_hwcap   Will Deacon
• [PATCH v3 07/10] ARM: perf: remove confusing comment from v7 perf events backend   Will Deacon
• [PATCH v3 08/10] ARM: perf: add PMUv2 common event definitions   Will Deacon
• [PATCH v3 09/10] ARM: perf: add support for the Cortex-A5 PMU   Will Deacon
• [PATCH v3 10/10] ARM: perf: add support for the Cortex-A15 PMU   Will Deacon
• [PATCH 1/1] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Will Deacon
• [PATCH] ARM: automatically select OMAP3_PMU if we try to use perf on OMAP3   Will Deacon
• [PATCHv2 0/4] ARM: pmu: improve PMU type identification   Will Deacon
• [PATCH] ARM: MAINTAINERS: add entry for ARM PMU profiling and debugging   Will Deacon
• [PATCH] ARM: perf: do not start the PMU when no events are present   Will Deacon
• [PATCH 11/23] ARM: entry: avoid enabling interrupts in prefetch/data abort handlers   Will Deacon
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Will Deacon
• [PATCH] ARM: automatically select OMAP3_PMU if we try to use perf on OMAP3   Will Deacon
• [PATCH 11/23] ARM: entry: avoid enabling interrupts in prefetch/data abort handlers   Will Deacon
• [PATCH] ARM: omap4: gpio: fix setting IRQWAKEN bits   DebBarma, Tarun Kanti
• [PATCH v2 00/18] GPIO: OMAP: Driver Cleanup and Fixes   Tarun Kanti DebBarma
• [PATCH v2 00/18] GPIO: OMAP: Driver Cleanup and Fixes   DebBarma, Tarun Kanti
• [PATCH v2 00/18] GPIO: OMAP: Driver Cleanup and Fixes   DebBarma, Tarun Kanti
• i.MX consolidation patches   Wolfgang Denk
• i.MX consolidation patches   Wolfgang Denk
• i.MX consolidation patches   Wolfgang Denk
• kernel - userspace shared memory   Zoltan Devai
• [PATCH 0/2] RFC: gpio: driver-local pin configuration   Stijn Devriendt
• [PATCH 0/2] RFC: gpio: driver-local pin configuration   Stijn Devriendt
• [PATCH 0/2] RFC: gpio: driver-local pin configuration   Stijn Devriendt
• [PATCH 2/2] mfd/ab8500: Use kstrtoul_from_user   Alexey Dobriyan
• [PATCH 1/2 v2] mfd/ab3550: Convert to kstrtou8_from_user   Alexey Dobriyan
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Ben Dooks
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Ben Dooks
• [PATCH] ARM: mach-s3c24a0: delete   Ben Dooks
• [PATCH] ARM: mach-s3c24a0: delete   Ben Dooks
• [PATCH 0/5] remove spi-s3c24xx-gpio driver   Ben Dooks
• [PATCH] ARM: mach-s3c24a0: delete   Ben Dooks
• [PATCH] ARM: mach-s3c24a0: delete   Ben Dooks
• [PATCH v4 07/13] arm: select HAVE_SECCOMP_FILTER   Will Drewry
• [PATCH v9 07/13] arm: select HAVE_SECCOMP_FILTER   Will Drewry
• [PATCH 1/2] cleanup regulator supply definitions in mach-omap2 to use REGULATOR_SUPPLY   Oleg Drokin
• [PATCH 1/2] cleanup regulator supply definitions in mach-omap2 to use REGULATOR_SUPPLY   Oleg Drokin
• [PATCH 1/2] cleanup regulator supply definitions in mach-omap2 to use REGULATOR_SUPPLY   Oleg Drokin
• [PATCH] Fix CPU spinlock lockups on secondary CPU bringup   Eric Dumazet
• [RFC 1/8] drivers: add generic remoteproc framework   Randy Dunlap
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Randy Dunlap
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Bob Dunlop
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Bob Dunlop
• parallel load of modules on an ARM multicore   EXTERNAL Waechtler Peter (Fa. TCP, CM-AI/PJ-CF31)
• AW: parallel load of modules on an ARM multicore   EXTERNAL Waechtler Peter (Fa. TCP, CM-AI/PJ-CF31)
• AW: parallel load of modules on an ARM multicore   EXTERNAL Waechtler Peter (Fa. TCP, CM-AI/PJ-CF31)
• [PATCH RFC] at91: Use "pclk" as con_id on at91cap9 and at91rm9200   Joachim Eastwood
• [Linaro-mm-sig] [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Michael K. Edwards
• [Linaro-mm-sig] [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Michael K. Edwards
• [Linaro-mm-sig] [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Michael K. Edwards
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Michael K. Edwards
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Michael K. Edwards
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Michael K. Edwards
• [PATCH] ATMEL, AVR32: inline nand partition table access   Hans-Christian Egtvedt
• [PATCH] ATMEL, AVR32: inline nand partition table access   Hans-Christian Egtvedt
• [PATCH] Fix build warning of the defconfigs   Hans-Christian Egtvedt
• [PATCH] atmel_serial: keep the platform_device unchanged   Hans-Christian Egtvedt
• [PATCH] atmel_serial: keep the platform_device unchanged   Hans-Christian Egtvedt
• [PATCH] DMA: OMAP: Remove extra looping from omap_request_dma   Scott Ellis
• [PATCH] ATMEL, AVR32: inline nand partition table access   Dmitry Eremin-Solenikov
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Dmitry Eremin-Solenikov
• [PATCH 2/2] mtd: drop ceiva map driver   Dmitry Eremin-Solenikov
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Dmitry Eremin-Solenikov
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Dmitry Eremin-Solenikov
• clps711x/ceiva support   Dmitry Eremin-Solenikov
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Dmitry Eremin-Solenikov
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Dmitry Eremin-Solenikov
• clps711x/ceiva support   Dmitry Eremin-Solenikov
• [PATCH 2/2] mtd: drop ceiva map driver   Dmitry Eremin-Solenikov
• [PATCH 2/3] ts72xx: use MTDPART_OFS_RETAIN for mtd partitioning   Dmitry Eremin-Solenikov
• [PATCH 2/3] ts72xx: use MTDPART_OFS_RETAIN for mtd partitioning   Dmitry Eremin-Solenikov
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Dmitry Eremin-Solenikov
• [PATCH] scoop: drop pcmcia_init callback   Dmitry Eremin-Solenikov
• [PATCH] sa1100: move serial_sa1100.h header to arch/arm/mach-sa1100/include/mach   Dmitry Eremin-Solenikov
• GPIO vs. other drivers order   Dmitry Eremin-Solenikov
• GPIO vs. other drivers order   Dmitry Eremin-Solenikov
• [PATCH] collie: don't read GPSR   Dmitry Eremin-Solenikov
• [PATCH] collie: don't read GPSR   Dmitry Eremin-Solenikov
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Dmitry Eremin-Solenikov
• [PATCH 2/2] mioa701: move gpio-pullup functionality to gpio-vbus   Dmitry Eremin-Solenikov
• [PATCH 2/2] mioa701: move gpio-pullup functionality to gpio-vbus   Dmitry Eremin-Solenikov
• [PATCH] lubbock-usb: fix compilation due to OTG switching to atomic notifiers   Dmitry Eremin-Solenikov
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Dmitry Eremin-Solenikov
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Dmitry Eremin-Solenikov
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Dmitry Eremin-Solenikov
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Dmitry Eremin-Solenikov
• Problem with GDB when debugging IRQ handlers   Dmitry Eremin-Solenikov
• Problem with GDB when debugging IRQ handlers   Dmitry Eremin-Solenikov
• Problem with GDB when debugging IRQ handlers   Dmitry Eremin-Solenikov
• [RFC] implement a generic PWM framework - once again   Dmitry Eremin-Solenikov
• Problem with GDB when debugging IRQ handlers   Dmitry Eremin-Solenikov
• Problem with GDB when debugging IRQ handlers   Dmitry Eremin-Solenikov
• Problem with GDB when debugging IRQ handlers   Dmitry Eremin-Solenikov
• Problem with GDB when debugging IRQ handlers   Dmitry Eremin-Solenikov
• Problem with GDB when debugging IRQ handlers   Dmitry Eremin-Solenikov
• [PATCH] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers   Fabio Estevam
• [PATCH v2 3/4] ARM: mxc: migrate mach-imx gpio driver to gpio-mxc   Fabio Estevam
• [PATCH] ARM: mx53: Fix IOMUX definitions for PATA_D6   Fabio Estevam
• [PATCH] ARM: mx53: Fix the chip select addresses   Fabio Estevam
• [PATCH v2] ARM: mx53: Fix alternate modes for MX53_PAD_PATA_DATA6   Fabio Estevam
• [PATCH 1/2] ARM: mx5/mx51_3ds: Fix build due to missing header and wrong define   Fabio Estevam
• [PATCH 2/2] ARM: mx5/eukrea_mbimx51-baseboard: Fix build issue due to removed irq   Fabio Estevam
• [PATCH v2 1/2] ARM: mx5/mx51_3ds: Fix build due to missing header and wrong define   Fabio Estevam
• [PATCH v2 2/2] ARM: mx5/eukrea_mbimx51-baseboard: Fix build issue due to removed irq   Fabio Estevam
• [PATCH v2 1/2] ARM: mx5/mx51_3ds: Fix build due to missing header and wrong define   Fabio Estevam
• [PATCH 1/5] DRM: add i.MX IPUv3 base driver   Fabio Estevam
• [PATCH] ARM: mx53: Add SDMA support for MX53   Fabio Estevam
• [PATCH 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Fabio Estevam
• [PATCH 1/2] ARM: mach-imx/mx31ads: Fix section mismatches   Fabio Estevam
• [PATCH 2/2] ARM: mach-imx/mx31lilly: Fix section mismatches   Fabio Estevam
• [PATCH] ARM: mx53: Add SDMA clock   Fabio Estevam
• [PATCH] ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals   Fabio Estevam
• MX27PDK does not boot on 'for-next'   Fabio Estevam
• [PATCH v2 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Fabio Estevam
• [PATCH] ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals   Fabio Estevam
• [PATCH v2] ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals   Fabio Estevam
• [PATCH 1/6] ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numbering   Fabio Estevam
• [PATCH 2/6] ARM: mach-imx/mx27_3ds: Fix regulator support   Fabio Estevam
• [PATCH 3/6] ARM: mach-imx/mx27_3ds: Add LCD support   Fabio Estevam
• [PATCH 4/6] ARM: mach-imx/mx27_3ds: Add touchscreen support   Fabio Estevam
• [PATCH 5/6] ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq function   Fabio Estevam
• [PATCH 6/6] ARM: mach-imx/mx27_3ds: Do not annotate the chip select as internal   Fabio Estevam
• [PATCH 3/6] ARM: mach-imx/mx27_3ds: Add LCD support   Fabio Estevam
• [PATCH 3/6] ARM: mach-imx/mx27_3ds: Add LCD support   Fabio Estevam
• [PATCH 1/3] ARM: imx2: Fix GPIO iosize   Fabio Estevam
• [PATCH 2/3] ARM: mach-imx/scb9328: Make the UART gpio setup simpler   Fabio Estevam
• [PATCH 3/3] mxc: iomuxv1: Do not use gpio_request when setting the pin as GPIO   Fabio Estevam
• MX27PDK does not boot on 'for-next'   Fabio Estevam
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Fabio Estevam
• [PATCH v2 1/6] ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numbering   Fabio Estevam
• [PATCH v2 2/6] ARM: mach-imx/mx27_3ds: Fix regulator support   Fabio Estevam
• [PATCH v2 3/6] ARM: mach-imx/mx27_3ds: Add LCD support   Fabio Estevam
• [PATCH v2 4/6] ARM: mach-imx/mx27_3ds: Add touchscreen support   Fabio Estevam
• [PATCH v2 5/6] ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq function   Fabio Estevam
• [PATCH v2 6/6] ARM: mach-imx/mx27_3ds: Do not annotate the chip select as internal   Fabio Estevam
• [PATCH] ARM: mxc: iomux-v1: Fix build warning   Fabio Estevam
• [PATCH REPOST] pxa/hx4700: Add ASIC3 LED support   Fabio Estevam
• [PATCH REPOST] pxa/hx4700: Add ASIC3 LED support   Fabio Estevam
• [PATCH] ARM: mach-mx5/mx53_ard: Add missing definition   Fabio Estevam
• [PATCH v2] ARM: mach-mx5/mx53_ard: Add missing definition   Fabio Estevam
• [PATCH 1/4] ARM: mx53: Add support for missing UARTs   Fabio Estevam
• [PATCH 2/4] ARM: mx53: Add SSI suport   Fabio Estevam
• [PATCH 3/4] ARM: mx51: Fix the address space length for SSI   Fabio Estevam
• [PATCH 4/4] ARM: mx53: Add keypad support   Fabio Estevam
• [PATCH 1/4] ARM: mx53: Add support for missing UARTs   Fabio Estevam
• [PATCH] ARM: mx53: Fix some interrupts marked as reserved.   Fabio Estevam
• [PATCH 1/1] net/fec: iMX53 needs gasket for both MII and RMII   Fabio Estevam
• [PATCH] ep93xx-eth: convert to phylib   Florian Fainelli
• [PATCH] ep93xx-eth: convert to phylib   Florian Fainelli
• [PATCH] ep93xx-eth: convert to phylib   Florian Fainelli
• [PATCH] ep93xx-eth: convert to phylib   Florian Fainelli
• [PATCH] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers   Nicolas Ferre
• [PATCH] ATMEL, AVR32: inline nand partition table access   Nicolas Ferre
• [PATCH] ATMEL, AVR32: inline nand partition table access   Nicolas Ferre
• [PATCH] at91: fix udc, ehci and mmc clock device name for cap9/9g45/9rl   Nicolas Ferre
• [PATCH 1/3] dmaengine: at_hdmac: replace spin_lock* with irqsave variants   Nicolas Ferre
• [PATCH 1/3] dmaengine: at_hdmac: replace spin_lock* with irqsave variants   Nicolas Ferre
• [PATCH 2/3] dmaengine: at_hdmac: improve power management routines   Nicolas Ferre
• [PATCH 3/3] dmaengine: at_hdmac: add slave config operation   Nicolas Ferre
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Nicolas Ferre
• [RFC PATCH] MTD: atmel_nand: optimize read/write buffer functions   Nicolas Ferre
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Nicolas Ferre
• [RFC PATCH] MTD: atmel_nand: optimize read/write buffer functions   Nicolas Ferre
• [RFC PATCH] MTD: atmel_nand: optimize read/write buffer functions   Nicolas Ferre
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Nicolas Ferre
• [PATCH] MTD: atmel_nand: fix wrong use of 0 as NULL   Nicolas Ferre
• [PATCH 1/2] MMC: PM: add suspend/resume in atmel-mci   Nicolas Ferre
• [PATCH 2/2] MMC: remove EXPERIMENTAL from the DMA selection of atmel-mci   Nicolas Ferre
• use dmaengine for atmel ssc/pcm dai drivers   Nicolas Ferre
• [PATCH 1/5] ASoC: wm8731: rework power management   Nicolas Ferre
• [PATCH 2/5] ASoC: atmel-ssc: add phybase in device structure   Nicolas Ferre
• [PATCH 3/5] ASoC: atmel-ssc: dmaengine usage switch depending on cpu   Nicolas Ferre
• [PATCH 4/5] ASoC: atmel_ssc_dai/atmel-pcm: adapt to dmaengine usage   Nicolas Ferre
• [PATCH 5/5] ASoC: atmel_ssc_dai: PM: actually stopping clock on suspend/resume   Nicolas Ferre
• [PATCH 1/2] MMC: PM: add suspend/resume in atmel-mci   Nicolas Ferre
• [PATCH V2] MMC: PM: add suspend/resume in atmel-mci   Nicolas Ferre
• [PATCH 1/5] ASoC: wm8731: rework power management   Nicolas Ferre
• [alsa-devel] [PATCH 1/5] ASoC: wm8731: rework power management   Nicolas Ferre
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Peter Fordham
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Peter Fordham
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Peter Fordham
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Peter Fordham
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Peter Fordham
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Peter Fordham
• [MPCore Watchdog]: Add suspend/resume support.   Peter Fordham
• [PATCH 1/2] sdio: add function to enable and disable sdio_single_irq optimization   Per Forlin
• [PATCH v2 0/2] sdio: add quirk for spurious SDIO IRQ   Per Forlin
• [PATCH v2 1/2] sdio: add quirk to handle pending IRQ in case of none CCCR_INTx bits   Per Forlin
• [PATCH v2 2/2] sdio: report error if pending IRQ but none CCCR_INTx bits   Per Forlin
• [PATCH v2 0/2] sdio: add quirk for spurious SDIO IRQ   Per Forlin
• [PATCH v2 1/2] sdio: add quirk to handle pending IRQ in case of none CCCR_INTx bits   Per Forlin
• [PATCH 2/2] sdio: report error if pending IRQ but none function bits   Per Forlin
• [PATCH v3] dmaengine: add new dma API for max_segment_number   Per Forlin
• [PATCH v4 03/12] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v4 02/12] omap_hsmmc: use original sg_len for dma_unmap_sg   Per Forlin
• [PATCH v4 00/12] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v3 RESEND] dma-mapping: add new API for max_segment_number   Per Forlin
• [PATCH RESEND] omap_hsmmc: use original sg_len for dma_unmap_sg   Per Forlin
• [PATCH v5 00/12] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v5 01/12] mmc: add none blocking mmc request function   Per Forlin
• [PATCH v5 02/12] omap_hsmmc: use original sg_len for dma_unmap_sg   Per Forlin
• [PATCH v5 03/12] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v5 04/12] mmci: implement pre_req() and post_req()   Per Forlin
• [PATCH v5 05/12] mmc: mmc_test: add debugfs file to list all tests   Per Forlin
• [PATCH v5 06/12] mmc: mmc_test: add test for none blocking transfers   Per Forlin
• [PATCH v5 07/12] mmc: add member in mmc queue struct to hold request data   Per Forlin
• [PATCH v5 08/12] mmc: add a block request prepare function   Per Forlin
• [PATCH v5 09/12] mmc: move error code in mmc_block_issue_rw_rq to a separate function.   Per Forlin
• [PATCH v5 10/12] mmc: add a second mmc queue request member   Per Forlin
• [PATCH v5 11/12] mmc: test: add random fault injection in core.c   Per Forlin
• [PATCH v5 12/12] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v6 01/11] mmc: add non-blocking mmc request function   Per Forlin
• [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v6 03/11] mmci: implement pre_req() and post_req()   Per Forlin
• [PATCH v6 04/11] mmc: mmc_test: add debugfs file to list all tests   Per Forlin
• [PATCH v6 05/11] mmc: mmc_test: add test for non-blocking transfers   Per Forlin
• [PATCH v6 06/11] mmc: add member in mmc queue struct to hold request data   Per Forlin
• [PATCH v6 07/11] mmc: add a block request prepare function   Per Forlin
• [PATCH v6 08/11] mmc: move error code in mmc_block_issue_rw_rq to a separate function.   Per Forlin
• [PATCH v6 09/11] mmc: add a second mmc queue request member   Per Forlin
• [PATCH v6 10/11] mmc: test: add random fault injection in core.c   Per Forlin
• [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v7 00/11] use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v7 01/11] mmc: add non-blocking mmc request function   Per Forlin
• [PATCH v7 02/11] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v7 03/11] mmci: implement pre_req() and post_req()   Per Forlin
• [PATCH v7 04/11] mmc: mmc_test: add debugfs file to list all tests   Per Forlin
• [PATCH v7 05/11] mmc: mmc_test: add test for non-blocking transfers   Per Forlin
• [PATCH v7 06/11] mmc: add member in mmc queue struct to hold request data   Per Forlin
• [PATCH v7 07/11] mmc: add a block request prepare function   Per Forlin
• [PATCH v7 08/11] mmc: move error code in mmc_block_issue_rw_rq to a separate function.   Per Forlin
• [PATCH v7 09/11] mmc: add a second mmc queue request member   Per Forlin
• [PATCH v7 10/11] mmc: test: add random fault injection in core.c   Per Forlin
• [PATCH v7 11/11] mmc: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v7 01/11] mmc: add non-blocking mmc request function   Per Forlin
• [PATCH v7 01/11] mmc: add non-blocking mmc request function   Per Forlin
• [PATCH v7 02/11] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v7 02/11] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v7 03/11] mmci: implement pre_req() and post_req()   Per Forlin
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v8 01/12] mmc: core: add non-blocking mmc request function   Per Forlin
• [PATCH v8 02/12] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v8 03/12] mmci: implement pre_req() and post_req()   Per Forlin
• [PATCH v8 04/12] mmc: mmc_test: add debugfs file to list all tests   Per Forlin
• [PATCH v8 05/12] mmc: mmc_test: add test for non-blocking transfers   Per Forlin
• [PATCH v8 06/12] mmc: mmc_test: test to measure how sg_len affect performance   Per Forlin
• [PATCH v8 07/12] mmc: block: add member in mmc queue struct to hold request data   Per Forlin
• [PATCH v8 08/12] mmc: block: add a block request prepare function   Per Forlin
• [PATCH v8 09/12] mmc: block: move error code in issue_rw_rq to a separate function.   Per Forlin
• [PATCH v8 10/12] mmc: queue: add a second mmc queue request member   Per Forlin
• [PATCH v8 11/12] mmc: core: add random fault injection   Per Forlin
• [PATCH v8 12/12] mmc: block: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v8 12/12] mmc: block: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH v2] ARM: kirkwood: Add support for Buffalo LS-XHL   Bjørn Forsman
• TI-Davinci 6446 oops on interrupts   Holger Freyther
• TI-Davinci 6446 oops on interrupts   Holger Freyther
• TI-Davinci 6446 oops on interrupts   Holger Freyther
• TI-Davinci 6446 oops on interrupts   Holger Freyther
• TI-Davinci 6446 oops on interrupts   Holger Freyther
• TI-Davinci 6446 oops on interrupts   Holger Hans Peter Freyther
• [PATCH] irq: Check if someone is overwriting the irq chip data   Holger Hans Peter Freyther
• [PATCH] Fix build warning of the defconfigs   Mike Frysinger
• [PATCH] ARM: quiet sparse noise due to __ARCH_WANT_SYS_RT_SIG(ACTION|SUSPEND)   Mike Frysinger
• More pinmux feedback, and GPIO vs. pinmux interaction   Mike Frysinger
• [PATCH 1/3] PWM: add pwm framework support   Mike Frysinger
• [PATCH 0/3] Fixes for breakage resulting from syscore_ops patch on s3c24xx   Abdoulaye Walsimou GAYE
• Trouble with newer kernels on Gumstix Overo boards   Gadiyar, Anand
• [PATCH] Fix build warning of the defconfigs   Wanlong Gao
• [PATCH v3 1/4] mmc: support sdhci-pxav3.c   Zhangfei Gao
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   Zhangfei Gao
• [PATCH v3 3/4] ARM: mmp2: update mmp2 mmc resource   Zhangfei Gao
• [PATCH v4 0/5] Provide sdhci driver for mmp2 and pxa9xx   Zhangfei Gao
• [PATCH v4 1/5] mmc: support sdhci-pxav3.c   Zhangfei Gao
• [PATCH v4 2/5] mmc: support sdhci-pxav2.c   Zhangfei Gao
• [PATCH v4 3/5] ARM: mmp2: update mmp2 mmc resource   Zhangfei Gao
• [PATCH v4 4/5] mmc: delete obsolete sdhci-pxa.c   Zhangfei Gao
• [PATCH v4 5/5] ARM: mmp2: update mmp2_defconfig to support mmc   Zhangfei Gao
• [PATCH v3 0/3] davinci: ioremap SRAM instead of iotables   Ben Gardiner
• [PATCH 1/3] [v3] davinci: sram: ioremap the davinci_soc_info specified sram regions   Ben Gardiner
• [PATCH 2/3] [v3] davinci: da850-dm646x: remove the SRAM_VIRT iotable entry   Ben Gardiner
• [PATCH 3/3] [v3] davinci: da850: changed SRAM allocator to shared ram.   Ben Gardiner
• [PATCH 01/10] mm: Introduce the memory regions data structure   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Matthew Garrett
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Matthew Garrett
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Matthew Garrett
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Matthew Garrett
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Matthew Garrett
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Matthew Garrett
• [PATCH 1/3] PWM: add pwm framework support   Bill Gatliff
• [PATCH 1/3] PWM: add pwm framework support   Bill Gatliff
• [PATCH 1/3] PWM: add pwm framework support   Bill Gatliff
• [PATCH] Support multiple MEM tags with atags->fdt conversion   David Gibson
• [PATCH] Support multiple MEM tags with atags->fdt conversion   David Gibson
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   David Gibson
• [PATCH 3/3] mach-u300: cleanup clockevent code   Thomas Gleixner
• [PATCH 3/3] mach-u300: cleanup clockevent code   Thomas Gleixner
• [PATCH] arm: fix regression in ixp4xx clocksource   Thomas Gleixner
• [PATCH 3/3] mach-u300: cleanup clockevent code   Thomas Gleixner
• [PATCH 3/3] mach-u300: cleanup clockevent code   Thomas Gleixner
• TI-Davinci 6446 oops on interrupts   Thomas Gleixner
• TI-Davinci 6446 oops on interrupts   Thomas Gleixner
• TI-Davinci 6446 oops on interrupts   Thomas Gleixner
• TI-Davinci 6446 oops on interrupts   Thomas Gleixner
• TI-Davinci 6446 oops on interrupts   Thomas Gleixner
• TI-Davinci 6446 oops on interrupts   Thomas Gleixner
• TI-Davinci 6446 oops on interrupts   Thomas Gleixner
• [RFC][PATCH 3/5] ARM: SAMSUNG: Adding IO mapping for OTG PHY.   Banajit Goswami
• [PATCH] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKV310   Banajit Goswami
• [PATCH] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKV310   Banajit Goswami
• [PATCH] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKV310   Banajit Goswami
• [PATCH v3 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH v3 02/12] OMAP2+: UART: Remove uart clock handling code from serial.c   Govindraj
• [PATCH v3 09/12] OMAP3: Serial: Remove uart pads from 3430 board file.   Govindraj
• [PATCH v3 07/12] OMAP: Serial: Allow UART parameters to be configured from board file.   Govindraj
• [PATCH v3 11/12] OMAP2: Serial: Add has_async_wake flag.   Govindraj
• [PATCH v3 05/12] OMAP: Serial: Hold console lock for console usage.   Govindraj
• [PATCH v3 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH v3 10/12] OMAP: Serial: Use resume call from prcm to enable uart   Govindraj
• [PATCH v3 00/12] OMAP2+: Serial: Runtime adaptation + cleanup   Govindraj.R
• [PATCH v3 01/12] OMAP2+: UART: Remove certain uart calls from sram_idle   Govindraj.R
• [PATCH v3 02/12] OMAP2+: UART: Remove uart clock handling code from serial.c   Govindraj.R
• [PATCH v3 03/12] OMAP2+: Serial: Add default mux for all uarts.   Govindraj.R
• [PATCH v3 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Govindraj.R
• [PATCH v3 05/12] OMAP: Serial: Hold console lock for console usage.   Govindraj.R
• [PATCH v3 06/12] Serial: OMAP2+: Move erratum handling from serial.c   Govindraj.R
• [PATCH v3 07/12] OMAP: Serial: Allow UART parameters to be configured from board file.   Govindraj.R
• [PATCH v3 08/12] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART   Govindraj.R
• [PATCH v3 09/12] OMAP3: Serial: Remove uart pads from 3430 board file.   Govindraj.R
• [PATCH v3 10/12] OMAP: Serial: Use resume call from prcm to enable uart   Govindraj.R
• [PATCH v3 11/12] OMAP2: Serial: Add has_async_wake flag.   Govindraj.R
• [PATCH v3 12/12] OMAP4: Serial: Set TX_FIFO_THRESHOLD if uart in dma mode for es2.0   Govindraj.R
• [PATCH v2] arm: omap3: cm-t35: add support for cm-t3730   Igor Grinberg
• [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC   Igor Grinberg
• [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC   Igor Grinberg
• [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC   Igor Grinberg
• [PATCH v2] arm: omap3: cm-t35: add support for cm-t3730   Igor Grinberg
• [PATCH 1/3] arm: omap3: cm-t35: minor comments fixes   Igor Grinberg
• [PATCH 2/3] arm: omap3: cm-t35: fix slow path warning   Igor Grinberg
• [PATCH v3 3/3] arm: omap3: cm-t35: add support for cm-t3730   Igor Grinberg
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [PATCH v3 3/3] arm: omap3: cm-t35: add support for cm-t3730   Igor Grinberg
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [PATCH v3 3/3] arm: omap3: cm-t35: add support for cm-t3730   Igor Grinberg
• [PATCH v3 3/3] arm: omap3: cm-t35: add support for cm-t3730   Igor Grinberg
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [PATCH] OMAP: HSMMC: Fix GPIO muxing   Igor Grinberg
• [PATCH V3 0/9] pxa3xx_nand: add two chip select support   Igor Grinberg
• kernel panic in spi_complete() on spitz (PXA270)   Igor Grinberg
• kernel panic in spi_complete() on spitz (PXA270)   Igor Grinberg
• kernel panic in spi_complete() on spitz (PXA270)   Igor Grinberg
• [RFC 0/8] Introducing a generic AMP/IPC framework   Grosen, Mark
• [RFC 5/8] remoteproc: add davinci implementation   Grosen, Mark
• [RFC 0/8] Introducing a generic AMP/IPC framework   Grosen, Mark
• [RFC 5/8] remoteproc: add davinci implementation   Grosen, Mark
• [RFC 5/8] remoteproc: add davinci implementation   Grosen, Mark
• [RFC 0/8] Introducing a generic AMP/IPC framework   Grosen, Mark
• [RFC 1/8] drivers: add generic remoteproc framework   Grosen, Mark
• [RFC 1/8] drivers: add generic remoteproc framework   Grosen, Mark
• [PATCH v2] ARM: kirkwood: Add support for Buffalo LS-XHL   Simon Guinot
• [PATCH] rtc-mv: add check for valid year range   Simon Guinot
• plat-orion gpio regression for edge-sensitive on mv78xx0   Simon Guinot
• [PATCH] genirq: replace irq_gc_ack with {set,clr}_bit variants   Simon Guinot
• [PATCH v2] ARM: kirkwood: Add support for Buffalo LS-XHL   Simon Guinot
• [RFC] Add Arm cpu topology definition   Vincent Guittot
• [RFC] Add Arm cpu topology definition   Vincent Guittot
• [RFC] Add Arm cpu topology definition   Vincent Guittot
• [RFC] Add Arm cpu topology definition   Vincent Guittot
• [RFC] Add Arm cpu topology definition   Vincent Guittot
• [RFC] Add Arm cpu topology definition   Vincent Guittot
• [RFC] Add Arm cpu topology definition   Vincent Guittot
• [RFC] Add Arm cpu topology definition   Vincent Guittot
• [RFC] Add Arm cpu topology definition   Vincent Guittot
• [RFC PATCH v2] Add ARM cpu topology definition   Vincent Guittot
• [RFC PATCH v2] Add ARM cpu topology definition   Vincent Guittot
• [PATCH v3] Add ARM cpu topology definition   Vincent Guittot
• [PATCH v3] Add ARM cpu topology definition   Vincent Guittot
• [PATCH v2 0/4] Move plat-mxc gpio driver into drivers/gpio   Shawn Guo
• [PATCH v2 1/4] gpio: gpio-mxc: add gpio driver for Freescale MXC architecture   Shawn Guo
• [PATCH v2 2/4] ARM: mxc: migrate mach-mx5 gpio driver to gpio-mxc   Shawn Guo
• [PATCH v2 3/4] ARM: mxc: migrate mach-imx gpio driver to gpio-mxc   Shawn Guo
• [PATCH v2 4/4] ARM: mxc: remove plat-mxc/gpio driver   Shawn Guo
• [PATCH 1/3] dmaengine: add new dma API for max_segment_number   Shawn Guo
• [PATCH v2 0/4] Move plat-mxc gpio driver into drivers/gpio   Shawn Guo
• [PATCH v2 0/4] Move plat-mxc gpio driver into drivers/gpio   Shawn Guo
• [PATCH v3 0/3] Move Freescale MXS gpio driver into drivers/gpio   Shawn Guo
• [PATCH v3 1/3] gpio: gpio-mxs: copy mach-mxs/gpio.c into drivers/gpio   Shawn Guo
• [PATCH v3 2/3] gpio: gpio-mxs: make it work for Freescale MXS architecture   Shawn Guo
• [PATCH v3 3/3] ARM: mxs: use gpio-mxs driver by adding platform device   Shawn Guo
• [PATCH v3 0/5] Move plat-mxc gpio driver into drivers/gpio   Shawn Guo
• [PATCH v3 1/5] gpio: gpio-mxc: copy plat-mxc/gpio.c into drivers/gpio   Shawn Guo
• [PATCH v3 2/5] gpio: gpio-mxc: make it work for Freescale MXC architecture   Shawn Guo
• [PATCH v3 3/5] ARM: mxc: migrate mach-mx5 gpio driver to gpio-mxc   Shawn Guo
• [PATCH v3 4/5] ARM: mxc: migrate mach-imx gpio driver to gpio-mxc   Shawn Guo
• [PATCH v3 5/5] ARM: mxc: remove plat-mxc/gpio driver   Shawn Guo
• [PATCH v4 0/3] Move Freescale MXS gpio driver into drivers/gpio   Shawn Guo
• [PATCH v4 1/3] gpio/mxs: Move Freescale mxs gpio driver to drivers/gpio   Shawn Guo
• [PATCH v4 2/3] gpio/mxs: Change gpio-mxs into an upstanding gpio driver   Shawn Guo
• [PATCH v4 3/3] gpio/mxs: Remove the use of gpio-mxs.h   Shawn Guo
• [PATCH v4 0/2] Move plat-mxc gpio driver into drivers/gpio   Shawn Guo
• [PATCH v4 1/2] gpio/mxc: Move Freescale MXC gpio driver to drivers/gpio   Shawn Guo
• [PATCH v4 2/2] gpio/mxc: Change gpio-mxc into an upstanding gpio driver   Shawn Guo
• [PATCH v3 1/3] gpio: gpio-mxs: copy mach-mxs/gpio.c into drivers/gpio   Shawn Guo
• [PATCH] gpio/mxc: convert gpio-mxc to use basic_mmio_gpio library   Shawn Guo
• [PATCH 1/2] gpio/mxs: save the unnecessary function mxs_gpio_to_irq   Shawn Guo
• [PATCH 2/2] gpio/mxs: convert gpio-mxs to use basic_mmio_gpio library   Shawn Guo
• [PATCH 1/3] dmaengine: add new dma API for max_segment_number   Shawn Guo
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Shawn Guo
• [PATCH v2 2/3] dmaengine: mxs-dma: set up max_segment_number   Shawn Guo
• [PATCH v2 3/3] mmc: mxs-mmc: call dmaengine API to set mmc->max_segs   Shawn Guo
• [PATCH] arm/mxs: Fix build failure on ocotp.c   Shawn Guo
• [PATCH 2/2] gpio/mxs: convert gpio-mxs to use basic_mmio_gpio library   Shawn Guo
• [PATCH v4 0/2] Move plat-mxc gpio driver into drivers/gpio   Shawn Guo
• [PATCH 1/2] gpio/mxs: save the unnecessary function mxs_gpio_to_irq   Shawn Guo
• [PATCH v2] gpio/mxs: convert gpio-mxs to use basic_mmio_gpio library   Shawn Guo
• [PATCH] ARM: mxc: convert tzic to use generic irq chip   Shawn Guo
• [PATCH] gpio/mxc: convert gpio-mxc to use generic irq chip   Shawn Guo
• [PATCH] gpio/mxc: convert gpio-mxc to use generic irq chip   Shawn Guo
• [PATCH 1/2] gpio/mxs: remove irq_high related implementation   Shawn Guo
• [PATCH 2/2] gpio/mxs: convert gpio-mxs to use generic irq chip   Shawn Guo
• [PATCH] ARM: mxc: convert tzic to use generic irq chip   Shawn Guo
• [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 1/4] mmc: sdhci: fix interrupt storm from card detection   Shawn Guo
• [PATCH 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Shawn Guo
• [PATCH 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP   Shawn Guo
• [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support   Shawn Guo
• [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support   Shawn Guo
• [PATCH 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support   Shawn Guo
• [PATCH 1/2] ARM:mach-mx5/board-mx51_babbage: Add CD and WP GPIOs   Shawn Guo
• [PATCH 2/2] ARM:mach-mx5/board-mx53_loco: Add CD and WP GPIOs   Shawn Guo
• [PATCH 2/2] ARM:mach-mx5/board-mx53_loco: Add CD and WP GPIOs   Shawn Guo
• [PATCH] gpio/mxc: fix a bug with gpio_get_value calling   Shawn Guo
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Shawn Guo
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Shawn Guo
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Shawn Guo
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Shawn Guo
• [PATCH 0/6] Some fixes and cleanup on imx-dma device registration   Shawn Guo
• [PATCH 1/6] ARM: mxc: imx-sdma device gets 16K iosize than 4K   Shawn Guo
• [PATCH 2/6] ARM: mxc: sdma on imx25 is a V2 block   Shawn Guo
• [PATCH 3/6] ARM: mxc: change imx-dma default to_version to 1   Shawn Guo
• [PATCH 4/6] ARM: mxc: imx-dma on imx25 has no other TO version but TO1   Shawn Guo
• [PATCH 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Shawn Guo
• [PATCH 6/6] ARM: mxc: clean up imx-dma device registration   Shawn Guo
• [PATCH 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Shawn Guo
• [PATCH v2 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Shawn Guo
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Shawn Guo
• [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP   Shawn Guo
• [PATCH 1/4] mmc: sdhci: fix interrupt storm from card detection   Shawn Guo
• [PATCH 1/4] mmc: sdhci: fix interrupt storm from card detection   Shawn Guo
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH v2 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Shawn Guo
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Shawn Guo
• [PATCH v2 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH v2 1/4] mmc: sdhci: fix interrupt storm from card detection   Shawn Guo
• [PATCH v2 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Shawn Guo
• [PATCH v2 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP   Shawn Guo
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Shawn Guo
• sdhci-esdhc-imx -- MMC 10x slower than it should be   Shawn Guo
• [PATCH v3] dmaengine: add new dma API for max_segment_number   Shawn Guo
• [PATCH v2 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Shawn Guo
• [PATCH v3 RESEND] dma-mapping: add new API for max_segment_number   Shawn Guo
• MX27PDK does not boot on 'for-next'   Shawn Guo
• [RFC PATCH 11/11] arm/versatile: Add device tree support   Shawn Guo
• [PATCH v2 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Shawn Guo
• [PATCH v2 4/4 RESEND] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 0/3] Add basic device support for imx51 babbage   Shawn Guo
• [PATCH 1/3] serial/imx: add device tree support   Shawn Guo
• [PATCH 2/3] net/fec: add device tree support   Shawn Guo
• [PATCH 3/3] ARM: mx5: add basic device tree support for imx51 babbage   Shawn Guo
• [PATCH 1/3] serial/imx: add device tree support   Shawn Guo
• [PATCH 1/3] serial/imx: add device tree support   Shawn Guo
• [PATCH 1/3] serial/imx: add device tree support   Shawn Guo
• [PATCH 2/3] net/fec: add device tree support   Shawn Guo
• [PATCH 2/3] net/fec: add device tree support   Shawn Guo
• [PATCH v3 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH v3 1/4] mmc: sdhci: fix interrupt storm from card detection   Shawn Guo
• [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Shawn Guo
• [PATCH v3 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP   Shawn Guo
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 6/6] ARM: mxc: clean up imx-dma device registration   Shawn Guo
• [PATCH v3 1/4] mmc: sdhci: fix interrupt storm from card detection   Shawn Guo
• [PATCH v3 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 4/4] ARM: zImage: allow supplementing appended DTB with traditional ATAG data   Shawn Guo
• [PATCH 1/3] serial/imx: add device tree support   Shawn Guo
• [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Shawn Guo
• [PATCH v3 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH 6/6] ARM: mxc: clean up imx-dma device registration   Shawn Guo
• [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH v4 1/4] mmc: sdhci: fix interrupt storm from card detection   Shawn Guo
• [PATCH v4 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Shawn Guo
• [PATCH v4 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP   Shawn Guo
• [PATCH v4 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Shawn Guo
• [PATCHv7] ARM: mx51: Add support for low power suspend on MX51   Shawn Guo
• [PATCH 6/6] ARM: mxc: clean up imx-dma device registration   Shawn Guo
• [PATCH 6/6] ARM: mxc: clean up imx-dma device registration   Shawn Guo
• MX27PDK does not boot on 'for-next'   Shawn Guo
• [PATCH v4 1/4] mmc: sdhci: fix interrupt storm from card detection   Shawn Guo
• [PATCH v2 0/6] Some fixes and cleanup on imx-dma device registration   Shawn Guo
• [PATCH v2 1/6] ARM: mxc: imx-sdma device gets 16K iosize than 4K   Shawn Guo
• [PATCH v2 2/6] ARM: mxc: sdma on imx25 is a V2 block   Shawn Guo
• [PATCH v2 3/6] ARM: mxc: change imx-dma default to_version to 1   Shawn Guo
• [PATCH v2 4/6] ARM: mxc: imx-dma on imx25 has no other TO version but TO1   Shawn Guo
• [PATCH v2 5/6] ARM: mxc: clean up imx-dma device registration   Shawn Guo
• [PATCH v2 6/6] dmaengine: imx-sdma: pass sdma firmware name via platform data   Shawn Guo
• [PATCH 1/3] serial/imx: add device tree support   Shawn Guo
• [PATCH 1/3] serial/imx: add device tree support   Shawn Guo
• [PATCH 1/3] serial/imx: add device tree support   Shawn Guo
• [PATCH 1/3] serial/imx: add device tree support   Shawn Guo
• [PATCH v2 0/5] Add basic device support for imx51 babbage   Shawn Guo
• [PATCH v2 1/5] dt: add of_alias_scan and of_alias_get_id   Shawn Guo
• [PATCH v2 2/5] serial/imx: get rid of the use of cpu_is_mx1()   Shawn Guo
• [PATCH v2 3/5] serial/imx: add device tree support   Shawn Guo
• [PATCH v2 4/5] net/fec: add device tree support   Shawn Guo
• [PATCH v2 5/5] ARM: mx5: add basic device tree support for imx51 babbage   Shawn Guo
• [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Shawn Guo
• [PATCH] arm: mxs: include asm/processor.h for cpu_relax()   Shawn Guo
• [PATCH 1/2] ARM:mach-mx5/board-mx51_babbage: Add CD and WP GPIOs   Shawn Guo
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Shawn Guo
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Shawn Guo
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Shawn Guo
• [PATCH] dmaengine: mxs-dma: skip request_irq for NO_IRQ   Shawn Guo
• [PATCH 1/1] net/fec: iMX53 needs gasket for both MII and RMII   Shawn Guo
• [RFC PATCH V5 0/4] cpuidle: global registration of idle states with per-cpu statistics   Trinabh Gupta
• [RFC PATCH V5 1/4] cpuidle: Move dev->last_residency update to driver enter routine, remove dev->last_state   Trinabh Gupta
• [RFC PATCH V5 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()   Trinabh Gupta
• [RFC PATCH V5 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields   Trinabh Gupta
• [RFC PATCH V5 4/4] cpuidle: Single/Global registration of idle states   Trinabh Gupta
• [PATCH] usb: fsl_udc_core: fix build breakage when building for ARM arch   Anatolij Gustschin
• [PATCH v2] usb: fsl_udc_core: fix build breakage when building for ARM arch   Anatolij Gustschin
• Bug in _und_usr on dual-core ARM?   TAO HU
• Bug in _und_usr on dual-core ARM?   TAO HU
• [PATCH] arm: fix regression in ixp4xx clocksource   Krzysztof Halasa
• [PATCH] arm: fix regression in ixp4xx clocksource   Krzysztof Halasa
• [PATCH] arm: fix regression in ixp4xx clocksource   Krzysztof Halasa
• [PATCH] arm: fix regression in ixp4xx clocksource   Krzysztof Halasa
• [PATCH 1/2] Samsung SoC ADC: use regulator (VDD for ADC).   MyungJoo Ham
• [PATCH 2/2] Samsung SoC ADC: Channel selection for S5PV210, S5PC110, and Exynos4   MyungJoo Ham
• [PATCH] Samsung SoC ADC: register address definition for S5PV210/S5PC110/Exynos4   MyungJoo Ham
• [PATCH] Samsung SoC: header file revised to prevent declaring duplicated.   MyungJoo Ham
• [PATCH 1/2] ARM: Exynos4: Support ADC   MyungJoo Ham
• [PATCH 2/2] ARM: Exynos4: ADC Support for NURI Board   MyungJoo Ham
• [PATCH 1/2] Exynos4 NURI: configure regulators and PMIC   MyungJoo Ham
• [PATCH 2/2] Exynos4 NURI: add MAX17042 fuel gauge   MyungJoo Ham
• [PATCH 1/2] Samsung SoC ADC: use regulator (VDD for ADC).   MyungJoo Ham
• [PATCH 1/2] Exynos4 NURI: configure regulators and PMIC   MyungJoo Ham
• [PATCH 1/2] Exynos4 NURI: configure regulators and PMIC   MyungJoo Ham
• [PATCH v2 0/5] Update Samsung-SoC ADC (regulator / recent CPU support)   MyungJoo Ham
• [PATCH v2 1/5] Samsung SoC ADC: use regulator (VDD for ADC).   MyungJoo Ham
• [PATCH v2 2/5] Samsung SoC ADC: Channel selection for S5PV210, S5PC110, and Exynos4   MyungJoo Ham
• [PATCH v2 3/5] ARM: Exynos4: Support ADC   MyungJoo Ham
• [PATCH v2 4/5] ARM: S5PC110/S5PV210: Support ADC   MyungJoo Ham
• [PATCH v2 5/5] Samsung SoC: header file revised to prevent declaring duplicated.   MyungJoo Ham
• [PATCH v2 0/4] ARM: Exynos4: NURI Board Configuration Udpate   MyungJoo Ham
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   MyungJoo Ham
• [PATCH v2 2/4] Exynos4 NURI: configure MAX17042 fuel gauge   MyungJoo Ham
• [PATCH v2 3/4] Exynos4 NURI: configure ADC.   MyungJoo Ham
• [PATCH v2 4/4] Exynos4 NURI: support for NTC thermistor   MyungJoo Ham
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   MyungJoo Ham
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   MyungJoo Ham
• [PATCH v2 1/5] Samsung SoC ADC: use regulator (VDD for ADC).   MyungJoo Ham
• [PATCH v2 4/4] Exynos4 NURI: support for NTC thermistor   MyungJoo Ham
• [PATCH 0/3] RTC-S3C Bugfixes   MyungJoo Ham
• [PATCH 1/3] rtc: rtc-s3c: Correct debug messages.   MyungJoo Ham
• [PATCH 2/3] rtc: rtc-s3c: Disable alarm entries that are not chosen.   MyungJoo Ham
• [PATCH 3/3] rtc: rtc-s3c: allow multiple open / allow no-ioctl-open'ed rtc to have irq.   MyungJoo Ham
• [PATCH 1/2] ARM: EXYNOS4: Add more register addresses of CMU and PMU.   MyungJoo Ham
• [PATCH 2/2] ARM: EXYNOS4: Add more registers to be saved and restored for PM   MyungJoo Ham
• [PATCH 1/2] Samsung SoC: Allow to enable wakeup with IRQs.   MyungJoo Ham
• [PATCH 2/2] ARM: EXYNOS4: Enable Internal RTC's Wakeup from Suspend-to-Ram   MyungJoo Ham
• [PATCH 1/7] ARM: EXYNOS4: Add external GIC io memory mapping   MyungJoo Ham
• [PATCH 1/7] ARM: EXYNOS4: Add external GIC io memory mapping   MyungJoo Ham
• [PATCH v3 0/6] Update Samsung-SoC ADC to support recent CPUs   MyungJoo Ham
• [PATCH v3 1/6] Samsung SoC ADC: use regulator (VDD for ADC).   MyungJoo Ham
• [PATCH v3 2/6] Samsung SoC ADC: Channel selection for S5PV210, S5PC110, and Exynos4   MyungJoo Ham
• [PATCH v3 3/6] Samsung SoC ADC: Revise PM for 12-bit ADC operations   MyungJoo Ham
• [PATCH v3 4/6] ARM: EXYNOS4: Support ADC   MyungJoo Ham
• [PATCH v3 5/6] ARM: S5PC110/S5PV210: Support ADC   MyungJoo Ham
• [PATCH v3 6/6] Samsung SoC: header file revised to prevent declaring duplicated.   MyungJoo Ham
• [PATCH v2 2/5] Samsung SoC ADC: Channel selection for S5PV210, S5PC110, and Exynos4   MyungJoo Ham
• [PATCH v3 0/6] ARM: EXYNOS4: NURI Board Configuration Update   MyungJoo Ham
• [PATCH v3 1/6] ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs   MyungJoo Ham
• [PATCH v3 2/6] Exynos4 NURI: configure regulators and PMIC (MAX8997)   MyungJoo Ham
• [PATCH v3 3/6] Exynos4 NURI: configure MAX17042 fuel gauge   MyungJoo Ham
• [PATCH v3 4/6] Exynos4 NURI: configure ADC.   MyungJoo Ham
• [PATCH v3 5/6] Exynos4 NURI: configure MAX8903 secondary charger   MyungJoo Ham
• [PATCH v3 6/6] Exynos4 NURI: configure rtc-s3c.   MyungJoo Ham
• [PATCH 0/3] ARM: EXYNOS4: NURI Support NTC   MyungJoo Ham
• [PATCH 1/3] Samsung SoC: NTC Thermistor attached to S3C-ADC.   MyungJoo Ham
• [PATCH 2/3] Samsung SoC: ready to use NTC value inside kernel   MyungJoo Ham
• [PATCH 3/3] Exynos4 NURI: support for NTC thermistor   MyungJoo Ham
• [PATCH v3 1/6] Samsung SoC ADC: use regulator (VDD for ADC).   MyungJoo Ham
• [PATCH 2/3] Samsung SoC: ready to use NTC value inside kernel   MyungJoo Ham
• [PATCH RESEND] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKC210   Jingoo Han
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Dave Hansen
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Dave Hansen
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Dave Hansen
• i.MX consolidation patches   Sascha Hauer
• [PATCH 5/8 v2] ARM i.MX Allow to compile together i.MX1/21/25/27   Sascha Hauer
• i.MX consolidation patches   Sascha Hauer
• i.MX consolidation patches   Sascha Hauer
• [PATCH 5/8 v2] ARM i.MX Allow to compile together i.MX1/21/25/27   Sascha Hauer
• [PATCH 8/10] drivers/video/imxfb.c: add missing clk_put   Sascha Hauer
• i.MX consolidation patches   Sascha Hauer
• i.MX consolidation patches   Sascha Hauer
• i.MX consolidation patches   Sascha Hauer
• [PATCH v2 1/2] ARM: mx5/mx51_3ds: Fix build due to missing header and wrong define   Sascha Hauer
• [PATCH 1/2] gpio/mxs: save the unnecessary function mxs_gpio_to_irq   Sascha Hauer
• [PATCH v4 2/2] gpio/mxc: Change gpio-mxc into an upstanding gpio driver   Sascha Hauer
• [PATCH v4 2/2] gpio/mxc: Change gpio-mxc into an upstanding gpio driver   Sascha Hauer
• [PATCH v4 0/2] Move plat-mxc gpio driver into drivers/gpio   Sascha Hauer
• [GIT PULL] i.MX patches for -rc   Sascha Hauer
• [RFC PATCH] KMS support for i.MX51/53   Sascha Hauer
• [PATCH 1/5] DRM: add i.MX IPUv3 base driver   Sascha Hauer
• [PATCH 2/5] DRM i.MX IPU: Add support for IPU submodules   Sascha Hauer
• [PATCH 3/5] DRM: Add drm encoder/connector helper   Sascha Hauer
• [PATCH 4/5] DRM: Add support for the sii902x HDMI/DVI encoder   Sascha Hauer
• [PATCH 5/5] DRM: Add i.MX IPUv3 support   Sascha Hauer
• [PATCH] gpio/mxc: convert gpio-mxc to use generic irq chip   Sascha Hauer
• [RFC PATCH] KMS support for i.MX51/53   Sascha Hauer
• [RFC PATCH] KMS support for i.MX51/53   Sascha Hauer
• [PATCH] ARM: mxc: convert tzic to use generic irq chip   Sascha Hauer
• [PATCH] ARM: mach-mx5/mx53_ard: Add support for i.MX53 ARD board   Sascha Hauer
• [PATCH v2 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Sascha Hauer
• [PATCH v2 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Sascha Hauer
• [PATCH] mach-h720x: fix build error   Sascha Hauer
• [PATCH v2 5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script   Sascha Hauer
• [PATCH] ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals   Sascha Hauer
• [PATCH] ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals   Sascha Hauer
• [PATCH v2] ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals   Sascha Hauer
• [PATCH 3/6] ARM: mach-imx/mx27_3ds: Add LCD support   Sascha Hauer
• [PATCH 3/6] ARM: mach-imx/mx27_3ds: Add LCD support   Sascha Hauer
• [PATCH 1/3] ARM: imx2: Fix GPIO iosize   Sascha Hauer
• [PATCHv7] ARM: mx51: Add support for low power suspend on MX51   Sascha Hauer
• [PATCH 6/6] ARM: mxc: clean up imx-dma device registration   Sascha Hauer
• [PATCHv7] ARM: mx51: Add support for low power suspend on MX51   Sascha Hauer
• i.MX consolidation patches   Sascha Hauer
• i.MX consolidation patches   Sascha Hauer
• i.MX consolidation patches   Sascha Hauer
• i.MX consolidation patches   Sascha Hauer
• [PATCH v2 6/6] dmaengine: imx-sdma: pass sdma firmware name via platform data   Sascha Hauer
• [PATCH v2 1/6] ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numbering   Sascha Hauer
• [PATCH] ARM: mxc: iomux-v1: Fix build warning   Sascha Hauer
• [PATCH 1/2] ARM:mx53: Add I2C3 support   Sascha Hauer
• [PATCH v2 0/6] Some fixes and cleanup on imx-dma device registration   Sascha Hauer
• [PATCH 1/1] MXC: iomux-v3: correct NO_PAD_CTRL definition   Sascha Hauer
• [PATCH 1/4] ARM: mx53: Add support for missing UARTs   Sascha Hauer
• [PATCH 1/1] MXC: iomux-v3: correct NO_PAD_CTRL definition   Sascha Hauer
• [RFC] implement a generic PWM framework - once again   Sascha Hauer
• [PATCH 1/2] PWM: add pwm framework support   Sascha Hauer
• [PATCH 2/2] pwm: Add a i.MX23/28 pwm driver   Sascha Hauer
• [PATCH V2 0/3] Add drivers/pwm and drivers/pwm/st_pwm.c   Sascha Hauer
• [PATCH 1/2] PWM: add pwm framework support   Sascha Hauer
• [PATCH] ARM: mx53: Fix some interrupts marked as reserved.   Sascha Hauer
• [PATCH 1/2] PWM: add pwm framework support   Sascha Hauer
• [PATCH v2] implement a generic PWM framework   Sascha Hauer
• [PATCH 1/2] PWM: add pwm framework support   Sascha Hauer
• [PATCH 2/2] pwm: Add a i.MX23/28 pwm driver   Sascha Hauer
• [PATCH V2 0/3] Add drivers/pwm and drivers/pwm/st_pwm.c   Sascha Hauer
• [PATCH] arm: mxs: include asm/processor.h for cpu_relax()   Sascha Hauer
• [PATCH v3] implement a generic PWM framework   Sascha Hauer
• [PATCH 1/3] PWM: add pwm framework support   Sascha Hauer
• [PATCH 2/3] ARM mxs: adjust pwm resources to what the driver expects   Sascha Hauer
• [PATCH 3/3] pwm: Add a i.MX23/28 pwm driver   Sascha Hauer
• [PATCH 3/3] pwm: Add a i.MX23/28 pwm driver   Sascha Hauer
• [PATCH 1/3] PWM: add pwm framework support   Sascha Hauer
• [PATCH v2] i2c: QUP based bus driver for Qualcomm MSM chipsets   Kenneth Heitke
• [PATCH v2] i2c: QUP based bus driver for Qualcomm MSM chipsets   Kenneth Heitke
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Thomas Hellstrom
• [PATCH] Fix build warning of the defconfigs   Benjamin Herrenschmidt
• [PATCH 0/3] DT bindings Cortex A9 peripherals   Rob Herring
• [PATCH 1/3] ARM: pmu: add OF probing support   Rob Herring
• [PATCH 2/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 3/3] ARM: l2x0: Add OF based initialization   Rob Herring
• [RFC PATCH v3 2/2] dt: add custom device creation to platform bus scan   Rob Herring
• [PATCH 3/3] ARM: l2x0: Add OF based initialization   Rob Herring
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Rob Herring
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Rob Herring
• [PATCH v2 0/3] DT bindings for Cortex A9 peripherals   Rob Herring
• [PATCH 1/3] ARM: pmu: add OF probing support   Rob Herring
• [PATCH 2/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 3/3] ARM: l2x0: Add OF based initialization   Rob Herring
• [PATCH] ARM: allow enabling SCU code on UP   Rob Herring
• [PATCH 3/3] ARM: l2x0: Add OF based initialization   Rob Herring
• [RFC PATCH v3 2/2] dt: add custom device creation to platform bus scan   Rob Herring
• [PATCH 1/3] ARM: pmu: add OF probing support   Rob Herring
• [PATCH v4 0/4] amba bus devicetree probing   Rob Herring
• [PATCH v4 1/4] dt: check root nodes for match on of_platform_populate   Rob Herring
• [PATCH v4 2/4] dt: add EXPORT_SYMBOL to of_platform_populate   Rob Herring
• [PATCH v4 3/4] drivers/amba: create devices from device tree   Rob Herring
• [PATCH v4 4/4] dt: add amba device creation to platform bus scan   Rob Herring
• [PATCH v4 3/4] drivers/amba: create devices from device tree   Rob Herring
• [PATCH v4 2/4] dt: add EXPORT_SYMBOL to of_platform_populate   Rob Herring
• [PATCH 1/3] ARM: Add cpu power management notifiers   Rob Herring
• [patch 00/16] arm: Replace arm sched_clock by clocksource based sched_clock   Rob Herring
• [PATCH 3/4] ARM: pmu: add OF probing support   Rob Herring
• [PATCH 3/4] ARM: pmu: add OF probing support   Rob Herring
• [PATCH 2/3] ARM: gic: add OF based initialization   Rob Herring
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Rob Herring
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Rob Herring
• [PATCHv2 0/4] ARM: pmu: improve PMU type identification   Rob Herring
• [RFC PATCH 03/11] dt/irq: add irq_domain_add_simple() helper   Rob Herring
• [RFC PATCH 11/11] arm/versatile: Add device tree support   Rob Herring
• [RFC PATCH 03/11] dt/irq: add irq_domain_add_simple() helper   Rob Herring
• [PATCH 06/14] ARM: suspend: rejig suspend follow-on function calling convention   Rob Herring
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Rob Herring
• [PATCH 2/3] net/fec: add device tree support   Rob Herring
• [PATCH 1/3] serial/imx: add device tree support   Rob Herring
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Rob Herring
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Rob Herring
• [PATCH 3/5] drivers/amba: create devices from device tree   Rob Herring
• [RFC PATCH 2/4] ARM: dt: register local timers as early platform devices   Rob Herring
• [RFC PATCH 0/4] ARM: make mach/hardware.h optional   Rob Herring
• [PATCH 1/4] microblaze: move pci flag functions into asm-generic   Rob Herring
• [PATCH 2/4] ARM: remove unnecessary mach/hardware.h includes   Rob Herring
• [PATCH 3/4] ARM: pci: make pcibios_assign_all_busses use pci_has_flag   Rob Herring
• [PATCH 4/4] ARM: convert PCI defines to variables   Rob Herring
• [PATCH 4/4] ARM: convert PCI defines to variables   Rob Herring
• [PATCH 2/4] ARM: remove unnecessary mach/hardware.h includes   Rob Herring
• [PATCH v2 0/6] ARM: make mach/hardware.h optional   Rob Herring
• [PATCH 1/6] microblaze: move pci flag functions into asm-generic   Rob Herring
• [PATCH] microblaze: move pci flag functions into asm-generic   Rob Herring
• [PATCH 2/6] ARM: move ARCH_HAS_DMA_SET_COHERENT_MASK into memory.h   Rob Herring
• [PATCH 3/6] ARM: remove unnecessary mach/hardware.h includes   Rob Herring
• [PATCH 4/6] ARM: pci: make pcibios_assign_all_busses use pci_has_flag   Rob Herring
• [PATCH 5/6] ARM: convert PCI defines to variables   Rob Herring
• [PATCH 6/6] ARM: set vga memory base at run-time   Rob Herring
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Rob Herring
• [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Pavel Herrmann
• [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Pavel Herrmann
• kernel panic in spi_complete() on spitz (PXA270)   Pavel Herrmann
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Kevin Hilman
• [PATCH v4 01/18] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c   Kevin Hilman
• [PATCH v4 02/18] I2C: OMAP2+: Name registers in I2C IP V2 only accordingly   Kevin Hilman
• [PATCH v4 03/18] I2C: OMAP2+: Introduce I2C IP versioning constants   Kevin Hilman
• [PATCH v4 04/18] I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision   Kevin Hilman
• [PATCH v4 05/18] I2C: OMAP: add rev to omap i2c platform data   Kevin Hilman
• [PATCH v4 06/18] I2C: OMAP1: set IP revision in platform data   Kevin Hilman
• [PATCH v4 07/18] I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus added   Kevin Hilman
• [PATCH v4 08/18] I2C: OMAP2+: use platform_data ip revision to select register map   Kevin Hilman
• [PATCH v4 09/18] I2C: OMAP2+: Solve array bounds overflow error on i2c idle   Kevin Hilman
• [PATCH v4 10/18] I2C: OMAP2+: address confused probed version naming   Kevin Hilman
• [PATCH v4 11/18] I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32   Kevin Hilman
• [PATCH v4 12/18] I2C: OMAP1/OMAP2+: add flags field to omap i2c platform data   Kevin Hilman
• [PATCH v4 13/18] I2C: OMAP2+: Pass flags up to omap i2c platform_data as well   Kevin Hilman
• [PATCH v4 14/18] I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test   Kevin Hilman
• [PATCH v4 15/18] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr   Kevin Hilman
• [PATCH v4 16/18] I2C: OMAP1: set i2c unit feature implementation flags in platform data   Kevin Hilman
• [PATCH v4 17/18] I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from platform data   Kevin Hilman
• [PATCH v4 18/18] I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_info   Kevin Hilman
• [PATCH 15/15] OMAP: GPIO: clean omap_gpio_mod_init function   Kevin Hilman
• [PATCH] ARM: omap4: gpio: fix setting IRQWAKEN bits   Kevin Hilman
• [PATCH V2] davinci: da850: move input frequency to board specific files   Kevin Hilman
• TI-Davinci 6446 oops on interrupts   Kevin Hilman
• [PATCH v2 1/2] ARM: omap4: gpio: fix setting IRQWAKEN bits   Kevin Hilman
• [PATCH] ARM: omap4: gpio: fix setting IRQWAKEN bits   Kevin Hilman
• [GIT PULL] OMAP PM fixes for v3.0-rc   Kevin Hilman
• [PATCH v2 1/2] ARM: omap4: gpio: fix setting IRQWAKEN bits   Kevin Hilman
• [PATCH V2] davinci: da850: move input frequency to board specific files   Kevin Hilman
• [PATCH 0/3] I2C: OMAP: PM related cleanup   Kevin Hilman
• [PATCH 1/3] I2C: OMAP: remove unneccesary use of pdev   Kevin Hilman
• [PATCH 2/3] I2C: OMAP: remove dev->idle, use usage counting provided by runtime PM   Kevin Hilman
• [PATCH 3/3] I2C: OMAP: remove racy suspend/resume callbacks   Kevin Hilman
• [PATCH] OMAP1: enable GENERIC_IRQ_CHIP   Kevin Hilman
• [PATCH] OMAP1: PM: register notifiers with generic clock ops even when !PM_RUNTIME   Kevin Hilman
• [GIT PULL] GPIO: OMAP fixes for v3.0-rc   Kevin Hilman
• [PATCH 1/3] ARM: Add cpu power management notifiers   Kevin Hilman
• [PATCH] OMAP1: enable GENERIC_IRQ_CHIP   Kevin Hilman
• [PATCH 2/2] KJH: use CPU PM for UART   Kevin Hilman
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Kevin Hilman
• [RESEND PATCH 0/2] ARM IRQ Kconfig patches   Kevin Hilman
• [PATCH 1/3] ARM: Add cpu power management notifiers   Kevin Hilman
• [PATCH V2] davinci: da850: move input frequency to board specific files   Kevin Hilman
• [PATCH] omap3: pm: Downgrade WARN for no wakeup source   Kevin Hilman
• [PATCH 00/14] GPIO: OMAP: first round of cleanup   Kevin Hilman
• [PATCH v2 00/18] GPIO: OMAP: Driver Cleanup and Fixes   Kevin Hilman
• [PATCH 00/14] GPIO: OMAP: first round of cleanup   Kevin Hilman
• [PATCH] omap3: pm: Downgrade WARN for no wakeup source   Kevin Hilman
• [PATCH] ARM: OMAP: Overo: remove illegal extra call to overo_ads7846_init()   Kevin Hilman
• [PATCH] ARM: OMAP: Overo: remove duplicate call to overo_ads7846_init()   Kevin Hilman
• [PATCH] omap2+: pm: Fix section mismatch in pm_dbg_init()   Kevin Hilman
• [PATCH] omap2+: pm: Fix section mismatch in pm_dbg_init()   Kevin Hilman
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Kevin Hilman
• [PATCH 08/10] omap2+: Use dmtimer macros for clocksource   Kevin Hilman
• [PATCH 08/10] omap2+: Use dmtimer macros for clocksource   Kevin Hilman
• [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later   Kevin Hilman
• [PATCH 05/10] omap2+: Use dmtimer macros for clockevent   Kevin Hilman
• [PATCH 08/10] omap2+: Use dmtimer macros for clocksource   Kevin Hilman
• [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later   Kevin Hilman
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Kevin Hilman
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Kevin Hilman
• [PATCH 24/25] ARM: pm: hide 1st and 2nd arguments to cpu_suspend from platform code   Kevin Hilman
• [PATCH] ARM: pm: add v7 suspend/resume functions to v7_processor functions   Kevin Hilman
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Kevin Hilman
• [PATCH 00/25] Re-jig cpu_suspend for a saner calling convention   Kevin Hilman
• [PATCH] OMAP3: PM: remove get_*_restore_pointer functions, directly use entry points   Kevin Hilman
• [GIT PULL] misc. OMAP PM updates for v3.1   Kevin Hilman
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Kevin Hilman
• [PATCH v3 02/12] OMAP2+: UART: Remove uart clock handling code from serial.c   Kevin Hilman
• [PATCH v3 09/12] OMAP3: Serial: Remove uart pads from 3430 board file.   Kevin Hilman
• [PATCH v3 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH v3 05/12] OMAP: Serial: Hold console lock for console usage.   Kevin Hilman
• [PATCH v3 07/12] OMAP: Serial: Allow UART parameters to be configured from board file.   Kevin Hilman
• [PATCH v3 08/12] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART   Kevin Hilman
• [PATCH v3 10/12] OMAP: Serial: Use resume call from prcm to enable uart   Kevin Hilman
• [PATCH v3 11/12] OMAP2: Serial: Add has_async_wake flag.   Kevin Hilman
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Kevin Hilman
• [GIT PULL] misc. OMAP PM updates for v3.1   Kevin Hilman
• [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later   Kevin Hilman
• [PATCH 08/10] omap2+: Use dmtimer macros for clocksource   Kevin Hilman
• [GIT PULL] misc. OMAP PM updates for v3.1   Kevin Hilman
• [PATCH 01/10] omap: Use separate init_irq functions to avoid cpu_is_omap tests early   Kevin Hilman
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Kevin Hilman
• [PATCHv2] omap3: beagle: Use GPTIMER1 for clockevents   Kevin Hilman
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Kevin Hilman
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Kevin Hilman
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Kevin Hilman
• [PATCH v3 11/12] OMAP2: Serial: Add has_async_wake flag.   Kevin Hilman
• [PATCH v3 05/12] OMAP: Serial: Hold console lock for console usage.   Kevin Hilman
• [PATCH v3 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH] OMAP1: enable GENERIC_IRQ_CHIP   Kevin Hilman
• [PATCH] omap1: select GENERIC_IRQ_CHIP for TI OMAP1   Kevin Hilman
• [PATCH] OMAP3: run the ASM sleep code from DDR   Kevin Hilman
• [PATCH] OMAP3: run the ASM sleep code from DDR   Kevin Hilman
• [PATCH] OMAP3: run the ASM sleep code from DDR   Kevin Hilman
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   KAMEZAWA Hiroyuki
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   KAMEZAWA Hiroyuki
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   KAMEZAWA Hiroyuki
• using identity_mapping_add & switching MMU state - how ?   Frank Hofmann
• using identity_mapping_add & switching MMU state - how ?   Frank Hofmann
• using identity_mapping_add & switching MMU state - how ?   Frank Hofmann
• using identity_mapping_add & switching MMU state - how ?   Frank Hofmann
• using identity_mapping_add & switching MMU state - how ?   Frank Hofmann
• using identity_mapping_add & switching MMU state - how ?   Frank Hofmann
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Frank Hofmann
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Frank Hofmann
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Frank Hofmann
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Frank Hofmann
• [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Frank Hofmann
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Frank Hofmann
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Frank Hofmann
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [PATCH v2 05/10] ARM: idmap: add header file for identity mapping functions   Frank Hofmann
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Frank Hofmann
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Frank Hofmann
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Frank Hofmann
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Frank Hofmann
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Frank Hofmann
• [linux-pm] [RFC PATCH v3] ARM hibernation/suspend-to-disk support   Frank Hofmann
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Frank Hofmann
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Frank Hofmann
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Frank Hofmann
• [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC   Alexander Holler
• [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC   Alexander Holler
• [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC   Alexander Holler
• [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC   Alexander Holler
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Alexander Holler
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alexander Holler
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alexander Holler
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alexander Holler
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alexander Holler
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alexander Holler
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alexander Holler
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Alexander Holler
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Alexander Holler
• mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• [PATCH] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• [PATCH] ARM: conditional ioremap() fix for copy_oldmem_page()   Simon Horman
• [PATCH 0/1 repost] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• [PATCH] mmc, ARM: Add zboot from eSD support for SuperH Mobile ARM   Simon Horman
• zaurus 3.0-rc1 Oops (fail GFP_DMA allocations when ZONE_DMA is not configured)   Cyril Hrubis
• 3.0-rc1: alsactl restore fails on spitz   Cyril Hrubis
• Disable CF during suspend   Cyril Hrubis
• [PATCH 1/2] mfd/ab3550: Use kstrtoul_from_user   Peter Huewe
• [PATCH 2/2] mfd/ab8500: Use kstrtoul_from_user   Peter Huewe
• [PATCH 1/2 v2] mfd/ab3550: Convert to kstrtou8_from_user   Peter Huewe
• [PATCH 2/2 v2] mfd/ab8500: Convert to kstrtou8_from_user   Peter Huewe
• [PATCH v3] mfd/ab8500: Convert to kstrtou8_from_user   Peter Huewe
• [PATCH 1/2 v3] mfd/ab3550: Convert to kstrtou8_from_user   Peter Huewe
• [PATCH 2/2 v4] mfd/ab8500: Convert to kstrtou8_from_user   Peter Huewe
• [PATCH v3 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Jon Hunter
• [PATCH v3 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Jon Hunter
• [PATCH v3 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver   Jon Hunter
• Problems with semaphores, mutexes, and atomic?   Dave Hylands
• Problems with semaphores, mutexes, and atomic?   Dave Hylands
• Problems with semaphores, mutexes, and atomic?   Dave Hylands
• Problems with semaphores, mutexes, and atomic?   Dave Hylands
• Problems with semaphores, mutexes, and atomic?   Dave Hylands
• [PATCH 2/2] mfd/ab8500: Use kstrtoul_from_user   Peter Hüwe
• [PATCH 1/2 v2] mfd/ab3550: Convert to kstrtou8_from_user   Peter Hüwe
• [PATCH] omap: cleanup NAND platform data   Grazvydas Ignotas
• [PATCH] omap: pandora: fix NAND support   Grazvydas Ignotas
• [PATCH] omap: cleanup NAND platform data   Grazvydas Ignotas
• [PATCH 2/2] Remove old-style supply.dev assignments common in hsmmc init   Grazvydas Ignotas
• [PATCH 1/2] ARM: pmu: refactor reservation   Jamie Iles
• [PATCH 2/2] ARM: pmu: reject duplicate PMU registrations   Jamie Iles
• ARM/DT: registering clks from DT in .init_early   Jamie Iles
• ARM/DT: registering clks from DT in .init_early   Jamie Iles
• [RFC PATCH 3/5] w90x900: convert to basic-mmio-gpio   Jamie Iles
• [PATCH 4/4] ARM: pmu: add platform_device_id table support   Jamie Iles
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Jamie Iles
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Jamie Iles
• GPIO vs. other drivers order   Jamie Iles
• GPIO vs. other drivers order   Jamie Iles
• [PATCHv2 0/4] ARM: pmu: improve PMU type identification   Jamie Iles
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Jamie Iles
• [PATCHv2 0/4] ARM: pmu: improve PMU type identification   Jamie Iles
• I can' t compile a new kernel version   Baurzhan Ismagulov
• [PATCH][Trivial] S3C2410 bluetooth: Remove duplicate linux/leds.h include   Vitaliy Ivanov
• [PATCH][Trivial] S3C2410 bluetooth: Remove duplicate linux/leds.h include   Vitaliy Ivanov
• [PATCH][Trivial] S3C2410 bluetooth: Remove duplicate linux/leds.h include   Vitaliy Ivanov
• 3.0-rc1: alsactl restore fails on spitz   Takashi Iwai
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Robert Jarzmik
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Robert Jarzmik
• [PATCH 0/2 RFC] arm/kirkwood: add dreamplug support.   Jason
• [PATCH 1/3] ARM: pmu: add OF probing support   Olof Johansson
• [PATCH 3/3] ARM: l2x0: Add OF based initialization   Olof Johansson
• [PATCH v2 2/4] ARM: mxc: migrate mach-mx5 gpio driver to gpio-mxc   Olof Johansson
• [PATCH v2 3/4] ARM: mxc: migrate mach-imx gpio driver to gpio-mxc   Olof Johansson
• [PATCH v2 4/4] ARM: mxc: remove plat-mxc/gpio driver   Olof Johansson
• [PATCH v2 1/4] gpio: gpio-mxc: add gpio driver for Freescale MXC architecture   Olof Johansson
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Olof Johansson
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Olof Johansson
• [PATCH v4] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Olof Johansson
• [PATCH] ARM: mx53: Fix IOMUX definitions for PATA_D6   Olof Johansson
• [PATCH v2] ARM: mx53: Fix alternate modes for MX53_PAD_PATA_DATA6   Olof Johansson
• [PATCH 3/3] ARM: l2x0: Add OF based initialization   Olof Johansson
• [PATCH 3/3] ARM: l2x0: Add OF based initialization   Olof Johansson
• [PATCH 2/2] gpio/tegra: add devicetree support   Olof Johansson
• [PATCH 1/2] gpio/tegra: Move Tegra gpio driver to drivers/gpio   Olof Johansson
• [PATCH 1/5] CPUFREQ/S3C64xx: Move S3C64xx CPUfreq driver into drivers/cpufreq   Dave Jones
• [PATCH] CPUFREQ/S5PV210, EXYNOS4: Add Kconfig options for S5PV210 and EXYNOS4 CPUfreq drivers   Dave Jones
• [PATCH 1/5] CPUFREQ/S3C64xx: Move S3C64xx CPUfreq driver into drivers/cpufreq   Dave Jones
• [PATCH] [CPUFREQ] s5pv210-cpufreq.c: Add missing clk_put   Dave Jones
• [PATCH] [CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq   Dave Jones
• [PATCH] [CPUFREQ] S3C6410: Support 800MHz operation in cpufreq   Dave Jones
• [PATCH][Trivial] ARM: remove duplicate include from arch/arm/mach-dove/common.c   Jesper Juhl
• [PATCH][Trivial] S3C2410 bluetooth: Remove duplicate linux/leds.h include   Jesper Juhl
• [PATCH][Trivial] S3C2410 bluetooth: Remove duplicate linux/leds.h include   Jesper Juhl
• [PATCH][Trivial] S3C2410 bluetooth: Remove duplicate linux/leds.h include   Jesper Juhl
• [PATCH 07/37] Remove unneeded version.h includes from arch/arm/   Jesper Juhl
• unsigned int 'return -1' in /sound/soc/codecs/tlv320aic23.c   Lambrecht Jürgen
• ASoC: imx dma tx burst size set to 6 and to 4   Lambrecht Jürgen
• ASoC: imx dma tx burst size set to 6 and to 4 ?   Lambrecht Jürgen
• [PATCH v2 0/2] ARM: OMAP4: fix MMC failure due to regulator enable/disable ops   Balaji T K
• [PATCH v2 1/2] ARM: OMAP4: MMC: increase delay for pbias   Balaji T K
• [PATCH v2 2/2] ARM: OMAP4: MMC: no regulator off during probe for eMMC   Balaji T K
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Vijaya Kumar K-1
• [stable] [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Greg KH
• [stable] [PATCH] MTD: pxa3xx_nand: fix nand detection issue   Greg KH
• [PATCH 1/2] amba pl011: workaround for uart registers lockup   Greg KH
• [stable] [PATCH v2] msm: timer: compensate for timer shift in msm_read_timer_count   Greg KH
• [stable] [PATCH v2] msm: timer: compensate for timer shift in msm_read_timer_count   Greg KH
• [PATCH v5 1/1] drivers:staging:pruss: add pruss staging mfd driver.   Greg KH
• [RFC] Add Arm cpu topology definition   Amit Kachhap
• [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq   Kishore Kadiyala
• [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req   Kishore Kadiyala
• [PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq   Kishore Kadiyala
• [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req   Kishore Kadiyala
• [PATCH 1/2] PWM: add pwm framework support   Matthias Kaehlcke
• [PATCH 1/2] PWM: add pwm framework support   Matthias Kaehlcke
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Vasily Khoruzhick
• [PATCH 4/4] This patch add configuraton for ok2440 development board.   Vasily Khoruzhick
• [PATCH 1/4] This patch adds ok2440 development board support.   Vasily Khoruzhick
• [PATCH v3 1/6] Samsung SoC ADC: use regulator (VDD for ADC).   Vasily Khoruzhick
• [PATCH] rtc: rtc-s3c: Update RTC driver for supporting clock gating   Donggeun Kim
• [PATCH] CPUFREQ/S5PV210, EXYNOS4: Add Kconfig options for S5PV210 and EXYNOS4 CPUfreq drivers   Kukjin Kim
• [PATCH 1/5] CPUFREQ/S3C64xx: Move S3C64xx CPUfreq driver into drivers/cpufreq   Kukjin Kim
• [PATCH] CPUFREQ/S5PV210, EXYNOS4: Add Kconfig options for S5PV210 and EXYNOS4 CPUfreq drivers   Kukjin Kim
• [PATCH 1/5] CPUFREQ/S3C64xx: Move S3C64xx CPUfreq driver into drivers/cpufreq   Kukjin Kim
• [PATCH] [CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/   Kukjin Kim
• [PATCH 5/10] arch/arm/mach-s5pv210/cpufreq.c: add missing clk_put   Kukjin Kim
• [PATCH/NEXT] ARM: exynos4: fix typo in platsmp.c   Kukjin Kim
• [PATCH] ARM: S5P: Should be S3C_VA_USB_HSPHY instead of S5P_VA_XX   Kukjin Kim
• [PATCH] ARM: exynos4: remove compiler warning: 'exynos4_pwm4_resume'   Kukjin Kim
• [PATCH] ARM: samsung: Remove unused onenand plat functions   Kukjin Kim
• [PATCH v3 0/3] Fixes for breakage resulting from syscore_ops patch on s3c24xx   Kukjin Kim
• [PATCH] [CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq   Kukjin Kim
• [PATCH] [CPUFREQ] s5pv210-cpufreq.c: Add missing clk_put   Kukjin Kim
• [PATCH] [CPUFREQ] Move compile for S3C64XX cpufreq to /drivers/cpufreq   Kukjin Kim
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Kukjin Kim
• [PATCH] [CPUFREQ] S3C6410: Support 800MHz operation in cpufreq   Kukjin Kim
• [PATCH 0/9] Add clkdev support for Samsung platforms   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add support for pre-sleep/post-restore gpio control   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Fix incorrect mapping of gpio pull-up macro to register setting   Kukjin Kim
• [GIT PULL] Samsung fixes for 3.0-rc3   Kukjin Kim
• [PATCH] dma-mapping: Undefine dma_map_single(), etc if CONFIG_HAVE_DMA_ATTRS is defined   Kukjin Kim
• [PATCH 1/5] ARM: EXYNOS4: Add EPLL clock operations   Kukjin Kim
• [PATCH 2/5] ARM: EXYNOS4: Add sclk_spdif clocks   Kukjin Kim
• [PATCH 3/5] ARM: EXYNOS4: fix improper gpio configuration   Kukjin Kim
• [PATCH 1/2] ARM: S3C64XX: Refresh Cragganmore support   Kukjin Kim
• [PATCH 0/3] Fixes for breakage resulting from syscore_ops patch on s3c24xx   Kukjin Kim
• [PATCH 0/7] ARM: EXYNOS4: Update PM   Kukjin Kim
• [PATCH 1/7] ARM: EXYNOS4: Support system level power down configuration   Kukjin Kim
• [PATCH 2/7] ARM: EXYNOS4: Remove PMU configuration for S2RAM   Kukjin Kim
• [PATCH 3/7] ARM: EXYNOS4: Add support PM with external GIC   Kukjin Kim
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Kukjin Kim
• [PATCH 5/7] ARM: EXYNOS4: Add save/restore function for PLL   Kukjin Kim
• [PATCH 6/7] ARM: EXYNOS4: Add save/restore for more ARM registers   Kukjin Kim
• [PATCH 7/7] ARM: EXYNOS4: Move S5P_CENTRAL_SEQ_CONFIGURATION setting for PM   Kukjin Kim
• [PATCH] Samsung SoC: header file revised to prevent declaring duplicated.   Kukjin Kim
• [PATCH v2 1/4] Exynos4 NURI: configure regulators and PMIC   Kukjin Kim
• [PATCH 6/7] ARM: EXYNOS4: Add save/restore for more ARM registers   Kukjin Kim
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Kukjin Kim
• [PATCH 6/7] ARM: EXYNOS4: Add save/restore for more ARM registers   Kukjin Kim
• [PATCH 7/7] ARM: EXYNOS4: Move S5P_CENTRAL_SEQ_CONFIGURATION setting for PM   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKV310   Kukjin Kim
• [PATCH] rtc: rtc-s3c: remove useless codes   Kukjin Kim
• [PATCH 14/25] ARM: pm: plat-s3c24xx: cleanup s3c_cpu_save   Kukjin Kim
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Kukjin Kim
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Kukjin Kim
• [PATCH 0/2] ARM: S5PV210: GONI board update for CIF camera support   Kukjin Kim
• [PATCH v2 2/5] Samsung SoC ADC: Channel selection for S5PV210, S5PC110, and Exynos4   Kukjin Kim
• [PATCH v2 3/5] ARM: Exynos4: Support ADC   Kukjin Kim
• [PATCH] [CPUFREQ] S3C6410: Add some lower frequencies for 800MHz base clock operation   Kukjin Kim
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Kukjin Kim
• [PATCH V2 0/8] ARM: EXYNOS4: Update PM   Kukjin Kim
• [PATCH V2 1/8] ARM: EXYNOS4: Support system level power down configuration   Kukjin Kim
• [PATCH V2 2/8] ARM: EXYNOS4: Remove PMU configuration for S2RAM   Kukjin Kim
• [PATCH V2 3/8] ARM: EXYNOS4: Add support PM with external GIC   Kukjin Kim
• [PATCH V2 4/8] ARM: SAMSUNG: Add support for failure of sleep mode   Kukjin Kim
• [PATCH V2 5/8] ARM: EXYNOS4: Support early wakeup entering sleep mode   Kukjin Kim
• [PATCH V2 6/8] ARM: EXYNOS4: Move S5P_CENTRAL_SEQ_CONFIGURATION setting for PM   Kukjin Kim
• [PATCH V2 7/8] ARM: EXYNOS4: Add save/restore for other ARM registers   Kukjin Kim
• [PATCH V2 8/8] ARM: EXYNOS4: Add save/restore function for PLL   Kukjin Kim
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Sangbeom Kim
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Sangbeom Kim
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Sangbeom Kim
• [PATCH v2 1/2] sdio: add quirk to handle pending IRQ in case of none CCCR_INTx bits   Troy Kisky
• [PATCH 1/1] net/fec: iMX53 needs gasket for both MII and RMII   Troy Kisky
• [PATCH 1/1] net/fec: iMX53 needs gasket for both MII and RMII   Troy Kisky
• [PATCH net-next] net: am79c961a: Omit check for multicast bit in netdev_for_each_mc_addr   Tobias Klauser
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Andi Kleen
• [PATCH] ARM: mx53: Fix the base addresses for the DDR memory regions   Marc Kleine-Budde
• i.MX consolidation patches   Uwe Kleine-König
• [PATCH] ARM: mach-mx5/mx53_ard: Add missing definition   Uwe Kleine-König
• [RFC PATCH] MTD: atmel_nand: optimize read/write buffer functions   Uwe Kleine-König
• [PATCH V4 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Uwe Kleine-König
• [PATCH V4 2/3] ARM: mxs: add GPMI-NFC device for imx23   Uwe Kleine-König
• [PATCH v5 2/3] ARM: mxs/mx23evk: add GPMI-NFC device   Uwe Kleine-König
• Git pull request: 64-bit atomic user helper   Uwe Kleine-König
• [PATCH V2] MMC: PM: add suspend/resume in atmel-mci   Uwe Kleine-König
• [PATCH] ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h   Uwe Kleine-König
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Koen Kooi
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Koen Kooi
• [PATCH 0/5] remove spi-s3c24xx-gpio driver   Peter Korsgaard
• [PATCH 1/5] mach-jive: convert to spi_gpio   Peter Korsgaard
• [PATCH 2/5] mach-qt2410: convert to spi_gpio   Peter Korsgaard
• [PATCH 3/5] mach-gta2: remove unused spi-gpio.h include   Peter Korsgaard
• [PATCH 4/5] spi: remove obsolete spi-s3c24xx-gpio driver   Peter Korsgaard
• [PATCH 5/5] mach-s3c2410: remove unused spi-gpio.h file   Peter Korsgaard
• [PATCH 0/5] remove spi-s3c24xx-gpio driver   Peter Korsgaard
• [PATCH 0/5] remove spi-s3c24xx-gpio driver   Peter Korsgaard
• [PATCH][Trivial] ARM: remove duplicate include from arch/arm/mach-dove/common.c   Jiri Kosina
• [PATCH][Trivial] ARM: remove duplicate include from arch/arm/mach-dove/common.c   Jiri Kosina
• [PATCH][Trivial] ARM: remove duplicate include from arch/arm/mach-dove/common.c   Jiri Kosina
• [PATCH][Trivial] S3C2410 bluetooth: Remove duplicate linux/leds.h include   Jiri Kosina
• [PATCH 1/3] dmaengine: add new dma API for max_segment_number   Koul, Vinod
• [PATCH 1/3] dmaengine: add new dma API for max_segment_number   Koul, Vinod
• [PATCH 1/3] dmaengine: add new dma API for max_segment_number   Koul, Vinod
• [PATCH v2 0/5] ep93xx DMA patches   Koul, Vinod
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Koul, Vinod
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Koul, Vinod
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Koul, Vinod
• [RFC] dmaengine: add new api for preparing simple slave transfer   Koul, Vinod
• [RFC] dmaengine: add new api for preparing simple slave transfer   Koul, Vinod
• [RFC] dmaengine: add new api for preparing simple slave transfer   Koul, Vinod
• [RFC] dmaengine: add new api for preparing simple slave transfer   Koul, Vinod
• [PATCH v2 6/6] dmaengine: imx-sdma: pass sdma firmware name via platform data   Vinod Koul
• [PATCH 4/5] ASoC: atmel_ssc_dai/atmel-pcm: adapt to dmaengine usage   Koul, Vinod
• [PATCH] arm, exec: remove redundant set_fs(USER_DS)   Mathias Krause
• [PATCH] arm, exec: remove redundant set_fs(USER_DS)   Mathias Krause
• [PATCH] arm, exec: remove redundant set_fs(USER_DS)   Mathias Krause
• [PATCH 3.0-rc2] OMAP: ams-delta: fix broken uevent sysfs entries   Janusz Krzysztofik
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Janusz Krzysztofik
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Janusz Krzysztofik
• [PATCH 3.0-rc2] OMAP: ams-delta: fix broken uevent sysfs entries   Janusz Krzysztofik
• [PATCH 3.0-rc2] OMAP: ams-delta: fix broken uevent sysfs entries   Janusz Krzysztofik
• [PATCH 3.0-rc2] OMAP: ams-delta: fix broken uevent sysfs entries   Janusz Krzysztofik
• [PATCH 3.0] OMAP: drop __initdata tags from static struct platform_device declarations   Janusz Krzysztofik
• [RESEND] [PATCH 3.0] OMAP: drop __initdata tags from static struct platform_device declarations   Janusz Krzysztofik
• [RFC] Add Arm cpu topology definition   Amit Kucheria
• [RFC PATCH v2] Add ARM cpu topology definition   Amit Kucheria
• [RFC] Add Arm cpu topology definition   Amit Kucheria
• [RFC PATCH v2] Add ARM cpu topology definition   Amit Kucheria
• [PATCH V3 1/3] drivers/pwm st_pwm: Add support for ST's Pulse Width Modulator   Viresh Kumar
• [PATCH] arm mach-s3c2440 mach-mini2440: New LCD-W35i support   Denis Kuzmenko
• [PATCH 5/10] arch/arm/mach-s5pv210/cpufreq.c: add missing clk_put   Julia Lawall
• [PATCH 8/10] drivers/video/imxfb.c: add missing clk_put   Julia Lawall
• [PATCH 9/10] arch/arm/mach-omap2/clock.c: add missing clk_put   Julia Lawall
• No subject   Jongpill Lee
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ray Lee
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse   Sangwook Lee
• [PATCH] arm: fix lockdep warning of "unannotated irqs-off"   Ming Lei
• [PATCH] arm: fix lockdep warning of "unannotated irqs-off"   Ming Lei
• [PATCH] arm: fix lockdep warning of "unannotated irqs-off"   Ming Lei
• [PATCH] arm: fix lockdep warning of "unannotated irqs-off"   Ming Lei
• [PATCH] arm: fix lockdep warning of "unannotated irqs-off"   Ming Lei
• arm: fix lockdep warning of "unannotated irqs-off"(v2)   Ming Lei
• OMPA4: 3.0-rc1: Unhandled fault during insmod 'ohci-hcd.ko'   Ming Lei
• OMPA4: 3.0-rc1: Unhandled fault during insmod 'ohci-hcd.ko'   Ming Lei
• [PATCH] omap3evm: Add Mistral WL12XX config support   Shahar Lev
• [PATCH] omap3evm: Add Mistral WL12XX config support   Shahar Lev
• [PATCH] omap3evm: Add Mistral WL12XX config support   Shahar Lev
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Sasha Levin
• [RFC] Add Arm cpu topology definition   Daniel Lezcano
• [PATCH v3] [media] at91: add Atmel Image Sensor Interface (ISI) support   Guennadi Liakhovetski
• [PATCH v4] [media] at91: add Atmel Image Sensor Interface (ISI) support   Guennadi Liakhovetski
• [PATCH] gpio: ep93xx: move driver to drivers/gpio   Grant Likely
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Grant Likely
• [RFC PATCH v3 2/2] dt: add custom device creation to platform bus scan   Grant Likely
• [RFC 2/2] ARM:Tegra: Device Tree Support: Initialize audio card gpio's from the device tree.   Grant Likely
• [RFC 2/2] ARM:Tegra: Device Tree Support: Initialize audio card gpio's from the device tree.   Grant Likely
• [RFC 2/2] ARM:Tegra: Device Tree Support: Initialize audio card gpio's from the device tree.   Grant Likely
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Grant Likely
• [RFC 3/3] ARM:Tegra: Device Tree Support: Initialize from wm8903 the device tree   Grant Likely
• [PATCH v2 0/4] Move plat-mxc gpio driver into drivers/gpio   Grant Likely
• [PATCH v2 0/4] Move plat-mxc gpio driver into drivers/gpio   Grant Likely
• [PATCH v2 0/4] Move plat-mxc gpio driver into drivers/gpio   Grant Likely
• [RFC 3/3] ARM:Tegra: Device Tree Support: Initialize from wm8903 the device tree   Grant Likely
• [PATCH 1/3] gpio/spear-plgpio: Add plgpio driver for SPEAr platform   Grant Likely
• [PATCH v2 0/2] Move Freescale MXS gpio driver into drivers/gpio   Grant Likely
• [PATCH v3] gpio: ep93xx: move driver to drivers/gpio   Grant Likely
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Grant Likely
• [PATCH v2 6/7] gpio_msm: Move Qualcomm v6 MSM driver into drivers   Grant Likely
• [PATCH v2 7/7] gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers   Grant Likely
• [PATCH v3 1/3] gpio: gpio-mxs: copy mach-mxs/gpio.c into drivers/gpio   Grant Likely
• [PATCH v3 3/3] ARM: mxs: use gpio-mxs driver by adding platform device   Grant Likely
• [PATCH v3 1/5] gpio: gpio-mxc: copy plat-mxc/gpio.c into drivers/gpio   Grant Likely
• [PATCH] arm/mxs: Fix build failure on ocotp.c   Grant Likely
• [PATCH v4 3/3] gpio/mxs: Remove the use of gpio-mxs.h   Grant Likely
• [PATCH v4 2/3] gpio/mxs: Change gpio-mxs into an upstanding gpio driver   Grant Likely
• [PATCH v4 1/2] gpio/mxc: Move Freescale MXC gpio driver to drivers/gpio   Grant Likely
• [PATCH v4 2/2] gpio/mxc: Change gpio-mxc into an upstanding gpio driver   Grant Likely
• [PATCH v3 1/3] gpio: gpio-mxs: copy mach-mxs/gpio.c into drivers/gpio   Grant Likely
• [PATCH] gpio/mxc: convert gpio-mxc to use basic_mmio_gpio library   Grant Likely
• [PATCH v4 2/2] gpio/mxc: Change gpio-mxc into an upstanding gpio driver   Grant Likely
• [PATCH 2/2] gpio/mxs: convert gpio-mxs to use basic_mmio_gpio library   Grant Likely
• [PATCH v4 2/2] gpio/mxc: Change gpio-mxc into an upstanding gpio driver   Grant Likely
• [PATCH v2 1/2] ARM: omap4: gpio: fix setting IRQWAKEN bits   Grant Likely
• [PATCH] gpio/mxc: convert gpio-mxc to use generic irq chip   Grant Likely
• [PATCH v2] gpio/mxs: convert gpio-mxs to use basic_mmio_gpio library   Grant Likely
• [PATCH 2/2] gpio/mxs: convert gpio-mxs to use generic irq chip   Grant Likely
• [PATCH 1/2] gpio/mxs: remove irq_high related implementation   Grant Likely
• [PATCH v2 1/2] ARM: omap4: gpio: fix setting IRQWAKEN bits   Grant Likely
• [PATCH] ARM: EXYNOS4: Fix incorrect mapping of gpio pull-up macro to register setting   Grant Likely
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Grant Likely
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Grant Likely
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Grant Likely
• [GIT PULL] GPIO: OMAP fixes for v3.0-rc   Grant Likely
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Grant Likely
• [PATCH] gpio-ep93xx: convert to platform_driver and use basic_mmio_gpio library   Grant Likely
• [PATCH] ARM: DT: don't try to access physical address zero   Grant Likely
• [PATCH] gpio-ep93xx: convert to platform_driver and use basic_mmio_gpio library   Grant Likely
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Grant Likely
• [PATCH] gpio/nomadik: fix sleepmode for elder Nomadik   Grant Likely
• [PATCH] ARM: EXYNOS4: Fix incorrect mapping of gpio pull-up macro to register setting   Grant Likely
• [PATCH v4 1/4] dt: check root nodes for match on of_platform_populate   Grant Likely
• [PATCH v4 1/4] dt: check root nodes for match on of_platform_populate   Grant Likely
• [PATCH v4 2/4] dt: add EXPORT_SYMBOL to of_platform_populate   Grant Likely
• [PATCH v4 3/4] drivers/amba: create devices from device tree   Grant Likely
• [PATCH v4 3/4] drivers/amba: create devices from device tree   Grant Likely
• [PATCH v4 4/4] dt: add amba device creation to platform bus scan   Grant Likely
• [PATCH v4 3/4] drivers/amba: create devices from device tree   Grant Likely
• [PATCH v4 2/4] dt: add EXPORT_SYMBOL to of_platform_populate   Grant Likely
• [PATCH] gpio/mxc: fix a bug with gpio_get_value calling   Grant Likely
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Grant Likely
• [PATCH 2/3] ARM: zImage: Allow the appending of a device tree binary   Grant Likely
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Grant Likely
• [PATCH] gpio/plat-pxa: fix clash with gpiolib namespace   Grant Likely
• [PATCH] gpio/plat-pxa: fix clash with gpiolib namespace   Grant Likely
• [PATCH] gpio/74x164: fix clash with gpiolib namespace   Grant Likely
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Grant Likely
• [PATCH 1/3] ARM: pmu: add OF probing support   Grant Likely
• [PATCH 2/3] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Grant Likely
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Grant Likely
• [PATCH 2/3] ARM: gic: add OF based initialization   Grant Likely
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Grant Likely
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Grant Likely
• [PATCH V2] ARM: Xilinx: Adding Xilinx board support   Grant Likely
• [PATCH 1/2] gpio/tegra: Move Tegra gpio driver to drivers/gpio   Grant Likely
• [PATCH 2/2] gpio/tegra: add devicetree support   Grant Likely
• [PATCH 1/2] gpio/tegra: Move Tegra gpio driver to drivers/gpio   Grant Likely
• [PATCH 1/2] gpio/tegra: Move Tegra gpio driver to drivers/gpio   Grant Likely
• [RFC PATCH 00/11] Full device tree support for ARM Versatile   Grant Likely
• [RFC PATCH 01/11] irq: add irq_domain translation infrastructure   Grant Likely
• [RFC PATCH 02/11] of/address: Add of_find_matching_node_by_address helper   Grant Likely
• [RFC PATCH 03/11] dt/irq: add irq_domain_add_simple() helper   Grant Likely
• [RFC PATCH 04/11] dt: add of_platform_populate() for creating device from the device tree   Grant Likely
• [RFC PATCH 05/11] dt: Add default match table for bus ids   Grant Likely
• [RFC PATCH 06/11] drivers/amba: create devices from device tree   Grant Likely
• [RFC PATCH 07/11] dt/platform: allow device name to be overridden   Grant Likely
• [RFC PATCH 08/11] powerpc/5200: convert mpc5200 to use of_platform_populate()   Grant Likely
• [RFC PATCH 09/11] arm/dt: Add dt machine definition   Grant Likely
• [RFC PATCH 10/11] arm/dt: Add skeleton dtsi file   Grant Likely
• [RFC PATCH 11/11] arm/versatile: Add device tree support   Grant Likely
• [RFC PATCH 11/11] arm/versatile: Add device tree support   Grant Likely
• [RFC PATCH 11/11] arm/versatile: Add device tree support   Grant Likely
• [PATCH 00/14] GPIO: OMAP: first round of cleanup   Grant Likely
• [RFC PATCH 03/11] dt/irq: add irq_domain_add_simple() helper   Grant Likely
• [RFC PATCH 03/11] dt/irq: add irq_domain_add_simple() helper   Grant Likely
• [PATCH 00/14] GPIO: OMAP: first round of cleanup   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 2/3] net/fec: add device tree support   Grant Likely
• [PATCH 3/3] ARM: mx5: add basic device tree support for imx51 babbage   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 0/3] Add basic device support for imx51 babbage   Grant Likely
• [PATCH 2/3] net/fec: add device tree support   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 2/3] net/fec: add device tree support   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 1/6] serial: samsung: Keep a copy of platform data in driver's private data   Grant Likely
• [PATCH 2/6] serial: samsung: Add device tree support for s5pv210 uart driver   Grant Likely
• [PATCH 3/6] watchdog: s3c2410: Add support for device tree based probe   Grant Likely
• [PATCH 4/6] mmc: sdhci-s3c: Add support for device tree based probe   Grant Likely
• [PATCH 6/6] arm: exynos4: Add a new Exynos4 device tree enabled machine   Grant Likely
• Pull request for Xilinx Zynq platform support   Grant Likely
• Pull request for Xilinx Zynq platform support   Grant Likely
• [RFC 0/8] Introducing a generic AMP/IPC framework   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 0/5] dt: Device creation infrastructure   Grant Likely
• [PATCH 1/5] dt: Add default match table for bus ids   Grant Likely
• [PATCH 2/5] dt: add of_platform_populate() for creating device from the device tree   Grant Likely
• [PATCH 3/5] drivers/amba: create devices from device tree   Grant Likely
• [PATCH 4/5] dt/platform: allow device name to be overridden   Grant Likely
• [PATCH 5/5] powerpc/5200: convert mpc5200 to use of_platform_populate()   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 2/6] serial: samsung: Add device tree support for s5pv210 uart driver   Grant Likely
• [PATCH 3/5] drivers/amba: create devices from device tree   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [PATCH 1/3] serial/imx: add device tree support   Grant Likely
• [RFC PATCH 1/4] dt: early platform devices support   Grant Likely
• [RFC PATCH 1/4] dt: early platform devices support   Grant Likely
• [RFC PATCH 2/4] ARM: dt: register local timers as early platform devices   Grant Likely
• [RFC PATCH 2/4] ARM: dt: register local timers as early platform devices   Grant Likely
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Grant Likely
• [RFC PATCH 3/4] ARM: dt: add GIC bindings and driver support   Grant Likely
• [RFC PATCH 4/4] ARM: dt: Add TWD bindings and driver support   Grant Likely
• [PATCH 2/6] serial: samsung: Add device tree support for s5pv210 uart driver   Grant Likely
• [RFC PATCH 3/4] ARM: dt: add GIC bindings and driver support   Grant Likely
• [RFC 1/8] drivers: add generic remoteproc framework   Grant Likely
• [RFC 2/8] remoteproc: add omap implementation   Grant Likely
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Grant Likely
• [RFC 1/8] drivers: add generic remoteproc framework   Grant Likely
• [RFC 1/8] drivers: add generic remoteproc framework   Grant Likely
• [RFC 2/2] ARM:Tegra: Device Tree Support: Initialize audio card gpio's from the device tree.   Grant Likely
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Grant Likely
• [RFC 2/8] remoteproc: add omap implementation   Grant Likely
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Grant Likely
• [PATCH 0/5] remove spi-s3c24xx-gpio driver   Grant Likely
• [PATCH] omap1: select GENERIC_IRQ_CHIP for TI OMAP1   Axel Lin
• [PATCH] mach-ux500: fix build error due to unknown 'regulator_en' field   Axel Lin
• [PATCH] ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h   Axel Lin
• [PATCH] OMAP3: beagle: add support for beagleboard xM revision C   Tony Lindgren
• [PATCH] ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init   Tony Lindgren
• [PATCH 1/2] ARM: OMAP4: MMC: increase delay for pbias   Tony Lindgren
• [PATCH v2 1/2] ARM: OMAP4: MMC: increase delay for pbias   Tony Lindgren
• [GIT PULL] omap fixes for v3.0-rc2   Tony Lindgren
• [PATCH] ARM: Make sure appended device tree data won't overlap kernel BSS   Tony Lindgren
• [PATCH] ARM: Make sure appended device tree data won't overlap kernel BSS   Tony Lindgren
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Tony Lindgren
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Tony Lindgren
• [PATCH 1/3] ARM: zImage: ensure it is always a multiple of 64 bits in size   Tony Lindgren
• [PATCH 2/3] ARM: zImage: Allow the appending of a device tree binary   Tony Lindgren
• [PATCH 3/3] ARM: zImage: make sure appended DTB doesn't get overwritten by kernel .bss   Tony Lindgren
• [PATCH] ARM: Make sure appended device tree data won't overlap kernel BSS   Tony Lindgren
• [PATCH v2] arm: omap3: cm-t35: add support for cm-t3730   Tony Lindgren
• [PATCH] omap: pandora: fix NAND support   Tony Lindgren
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Tony Lindgren
• [PATCH v2] arm: omap3: cm-t35: add support for cm-t3730   Tony Lindgren
• [RFC 1/2] omap: mcbsp: Drop SPI mode support   Tony Lindgren
• Regulator cleanups in mach-omap2, take three   Tony Lindgren
• [PATCH 3.0-rc2] OMAP: ams-delta: fix broken uevent sysfs entries   Tony Lindgren
• [PATCH] OMAP1: enable GENERIC_IRQ_CHIP   Tony Lindgren
• [PATCH] omap3evm: Add Mistral WL12XX config support   Tony Lindgren
• [PATCH] OMAP1: PM: register notifiers with generic clock ops even when !PM_RUNTIME   Tony Lindgren
• [PATCH] omap3evm: Add Mistral WL12XX config support   Tony Lindgren
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Tony Lindgren
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Tony Lindgren
• [GIT PULL] omap fixes for v3.0-rc3   Tony Lindgren
• [PATCH 00/10] init_early cleanup for omap init_irq and init_timer   Tony Lindgren
• [PATCH 01/10] omap: Use separate init_irq functions to avoid cpu_is_omap tests early   Tony Lindgren
• [PATCH 02/10] omap: Set separate timer init functions to avoid cpu_is_omap tests   Tony Lindgren
• [PATCH 03/10] omap: Move dmtimer defines to dmtimer.h   Tony Lindgren
• [PATCH 04/10] omap: Make a subset of dmtimer functions into inline functions   Tony Lindgren
• [PATCH 05/10] omap2+: Use dmtimer macros for clockevent   Tony Lindgren
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Tony Lindgren
• [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later   Tony Lindgren
• [PATCH 08/10] omap2+: Use dmtimer macros for clocksource   Tony Lindgren
• [PATCH 09/10] omap2+: Remove omap2_gp_clockevent_set_gptimer   Tony Lindgren
• [PATCH 10/10] omap2+: Rename timer-gp.c into timer.c to combine timer init functions   Tony Lindgren
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Tony Lindgren
• [PATCH 01/10] omap: Use separate init_irq functions to avoid cpu_is_omap tests early   Tony Lindgren
• [PATCH 03/10] omap: Move dmtimer defines to dmtimer.h   Tony Lindgren
• Trouble with newer kernels on Gumstix Overo boards   Tony Lindgren
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Tony Lindgren
• [PATCH 05/10] omap2+: Use dmtimer macros for clockevent   Tony Lindgren
• [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later   Tony Lindgren
• [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later   Tony Lindgren
• [PATCH 08/10] omap2+: Use dmtimer macros for clocksource   Tony Lindgren
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Tony Lindgren
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Tony Lindgren
• [PATCH v3 3/3] arm: omap3: cm-t35: add support for cm-t3730   Tony Lindgren
• [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later   Tony Lindgren
• [PATCH 08/10] omap2+: Use dmtimer macros for clocksource   Tony Lindgren
• [PATCHv2] omap3: beagle: Use GPTIMER1 for clockevents   Tony Lindgren
• [GIT PULL] misc. OMAP PM updates for v3.1   Tony Lindgren
• [PATCHv2] omap3: beagle: Use GPTIMER1 for clockevents   Tony Lindgren
• [PATCH] Use MMIO clocksource for 32kHz counter   Tony Lindgren
• [PATCHv2] omap3: beagle: Use GPTIMER1 for clockevents   Tony Lindgren
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Tony Lindgren
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Tony Lindgren
• [PATCH] Use MMIO clocksource for 32kHz counter   Tony Lindgren
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Tony Lindgren
• [GIT PULL] misc. OMAP PM updates for v3.1   Tony Lindgren
• [PATCH] omap: cleanup NAND platform data   Tony Lindgren
• [RFC 1/2] omap: mcbsp: Drop SPI mode support   Tony Lindgren
• [GIT PULL] misc. OMAP PM updates for v3.1   Tony Lindgren
• [GIT PULL] omap clean-up for v3.1 merge window   Tony Lindgren
• [GIT PULL] omap clean-up for v3.1 merge window   Tony Lindgren
• [PATCH 3/3] Update Nook Color machine 3284 to common Encore name.   Tony Lindgren
• [RFC PATCH 1/5] OMAP3:I2C: Add device tree nodes for beagle board   Tony Lindgren
• IrDA driver fails on PXA255   Russell King - ARM Linux
• [PATCH] gpio: ep93xx: move driver to drivers/gpio   Russell King - ARM Linux
• [PATCH 2/3] clocksource: add DB8500 PRCMU Timer support   Russell King - ARM Linux
• [PATCH 3/3] mach-u300: cleanup clockevent code   Russell King - ARM Linux
• [PATCH] arm: fix lockdep warning of "unannotated irqs-off"   Russell King - ARM Linux
• [PATCH] arm: fix lockdep warning of "unannotated irqs-off"   Russell King - ARM Linux
• [PATCH 5/8 v2] ARM i.MX Allow to compile together i.MX1/21/25/27   Russell King - ARM Linux
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Russell King - ARM Linux
• i.MX consolidation patches   Russell King - ARM Linux
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Russell King - ARM Linux
• i.MX consolidation patches   Russell King - ARM Linux
• [PATCH 2/3] clocksource: add DB8500 PRCMU Timer support   Russell King - ARM Linux
• [PATCH] arm: fix lockdep warning of "unannotated irqs-off"   Russell King - ARM Linux
• IrDA driver fails on PXA255   Russell King - ARM Linux
• [PATCH] arm: fix lockdep warning of "unannotated irqs-off"   Russell King - ARM Linux
• [PATCH] arm: fix regression in ixp4xx clocksource   Russell King - ARM Linux
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Russell King - ARM Linux
• [PATCH 1/5] net: ep93xx_eth: pass struct device to DMA API functions   Russell King - ARM Linux
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Russell King - ARM Linux
• i.MX consolidation patches   Russell King - ARM Linux
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Russell King - ARM Linux
• using identity_mapping_add & switching MMU state - how ?   Russell King - ARM Linux
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Russell King - ARM Linux
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Russell King - ARM Linux
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Russell King - ARM Linux
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Russell King - ARM Linux
• [PATCH v2 0/4] Move plat-mxc gpio driver into drivers/gpio   Russell King - ARM Linux
• [PATCH 1/2] clps711x/ceiva: port to use physmap flash   Russell King - ARM Linux
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Russell King - ARM Linux
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Russell King - ARM Linux
• using identity_mapping_add & switching MMU state - how ?   Russell King - ARM Linux
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Russell King - ARM Linux
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Russell King - ARM Linux
• [PATCH 2/3] mach-u300: fix compilaton warning in IO accessors   Russell King - ARM Linux
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Russell King - ARM Linux
• [RFC PATCH V5 1/4] cpuidle: Move dev->last_residency update to driver enter routine, remove dev->last_state   Russell King - ARM Linux
• TI-Davinci 6446 oops on interrupts   Russell King - ARM Linux
• TI-Davinci 6446 oops on interrupts   Russell King - ARM Linux
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Russell King - ARM Linux
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Russell King - ARM Linux
• [PATCH] ARM: fix ioremap to allow mapping some specific RAM areas   Russell King - ARM Linux
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Russell King - ARM Linux
• [PATCH] ARM: fix ioremap to allow mapping some specific RAM areas   Russell King - ARM Linux
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Russell King - ARM Linux
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Russell King - ARM Linux
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Russell King - ARM Linux
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Russell King - ARM Linux
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Russell King - ARM Linux
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Russell King - ARM Linux
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Russell King - ARM Linux
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Russell King - ARM Linux
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Russell King - ARM Linux
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Russell King - ARM Linux
• [RFC] dmaengine: add new api for preparing simple slave transfer   Russell King - ARM Linux
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Russell King - ARM Linux
• [RFC] dmaengine: add new api for preparing simple slave transfer   Russell King - ARM Linux
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Russell King - ARM Linux
• [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Russell King - ARM Linux
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Russell King - ARM Linux
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Russell King - ARM Linux
• [RFC PATCH 0/2] ARM: Add a generic macro for declaring proc_info structs   Russell King - ARM Linux
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Russell King - ARM Linux
• [PATCH 2/2] amba pl011: platform data for reg lockup and glitch   Russell King - ARM Linux
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Russell King - ARM Linux
• [RFC] dmaengine: add new api for preparing simple slave transfer   Russell King - ARM Linux
• [RFC] dmaengine: add new api for preparing simple slave transfer   Russell King - ARM Linux
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Russell King - ARM Linux
• [PATCH] arm, exec: remove redundant set_fs(USER_DS)   Russell King - ARM Linux
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [RFC PATCH 0/2] ARM: Add a generic macro for declaring proc_info structs   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [PATCH] arm: fix regression in ixp4xx clocksource   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [RFC PATCH 0/2] ARM: Add a generic macro for declaring proc_info structs   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [PATCH 0/6] footbridge consolidation patches   Russell King - ARM Linux
• [PATCH 5/6] arm: footbridge: convert old leds event driver to led gpio trigger driver of Netwinder   Russell King - ARM Linux
• [PATCH 1/3] ARM: zImage: ensure it is always a multiple of 64 bits in size   Russell King - ARM Linux
• [PATCH 2/3] ARM: zImage: Allow the appending of a device tree binary   Russell King - ARM Linux
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Russell King - ARM Linux
• [RFC PATCH 0/2] ARM: Add a generic macro for declaring proc_info structs   Russell King - ARM Linux
• [PATCH] fb.h: ARM uses __raw_{read/write}   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [Patch v2 03/11] ARM: hwcaps: use shifts instead of hardcoded constants   Russell King - ARM Linux
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Russell King - ARM Linux
• [PATCH 00/14] Re-jig cpu_suspend for a saner calling convention   Russell King - ARM Linux
• [PATCH 01/14] ARM: suspend: make MULTI_CPU and !MULTI_CPU resume paths the same   Russell King - ARM Linux
• [PATCH 02/14] ARM: suspend: move return address (for cpu_resume) to top of stack   Russell King - ARM Linux
• [PATCH 03/14] ARM: suspend: extract common code from MULTI_CPU/!MULTI_CPU paths   Russell King - ARM Linux
• [PATCH 04/14] ARM: suspend: preserve r4 - r11 across a suspend   Russell King - ARM Linux
• [PATCH 05/14] ARM: suspend: reallocate registers to avoid r2, r3   Russell King - ARM Linux
• [PATCH 06/14] ARM: suspend: rejig suspend follow-on function calling convention   Russell King - ARM Linux
• [PATCH 07/14] ARM: suspend: move sa1100 to use proper suspend func arg0   Russell King - ARM Linux
• [PATCH 08/14] ARM: suspend: convert cpu_suspend() to a normal function   Russell King - ARM Linux
• [PATCH 09/14] ARM: suspend: plat-s3c24xx: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 10/14] ARM: suspend: sa1100: cleanup sa1100_cpu_suspend   Russell King - ARM Linux
• [PATCH 11/14] ARM: suspend: mach-s5pv210: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 12/14] ARM: suspend: mach-exynos4: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 13/14] ARM: suspend: mach-s3c64xx: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 14/14] ARM: suspend: pxa: cleanup PXA suspend code   Russell King - ARM Linux
• [PATCH 03/14] ARM: suspend: extract common code from MULTI_CPU/!MULTI_CPU paths   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Russell King - ARM Linux
• [PATCH 2/3] ARM: gic: add OF based initialization   Russell King - ARM Linux
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Russell King - ARM Linux
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Russell King - ARM Linux
• [RESEND PATCH 0/2] ARM IRQ Kconfig patches   Russell King - ARM Linux
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Russell King - ARM Linux
• [RFC PATCH v2 0/5] Add generic macros for declaring various CPU structs   Russell King - ARM Linux
• [RFC] Add Arm cpu topology definition   Russell King - ARM Linux
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Russell King - ARM Linux
• [RESEND PATCH 0/2] ARM IRQ Kconfig patches   Russell King - ARM Linux
• [PATCH 3.0] OMAP: drop __initdata tags from static struct platform_device declarations   Russell King - ARM Linux
• [PATCH 06/14] ARM: suspend: rejig suspend follow-on function calling convention   Russell King - ARM Linux
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Russell King - ARM Linux
• Problems with semaphores, mutexes, and atomic?   Russell King - ARM Linux
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [PATCH 01/10] omap: Use separate init_irq functions to avoid cpu_is_omap tests early   Russell King - ARM Linux
• [PATCH 03/10] omap: Move dmtimer defines to dmtimer.h   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [PATCH][Trivial] S3C2410 bluetooth: Remove duplicate linux/leds.h include   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [PATCH 1/2] config: omap2+: force fb and dss support as built-in   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [PATCH 2/8] ARM: dma-mapping: implement dma_map_single on top of dma_map_page   Russell King - ARM Linux
• [PATCH 4/8] ARM: dma-mapping: implement dma sg methods on top of generic dma ops   Russell King - ARM Linux
• [PATCH 5/8] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Russell King - ARM Linux
• Pull request for Xilinx Zynq platform support   Russell King - ARM Linux
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Russell King - ARM Linux
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Russell King - ARM Linux
• [PATCH 0/3] Improve MMC error handling (3rd rev)   Russell King - ARM Linux
• [PATCH 1/3] MMC: allow get_card_status() to return error status   Russell King - ARM Linux
• [PATCH 2/3] MMC: improve error recovery from command channel errors   Russell King - ARM Linux
• [PATCH 3/3] MMC: add checking of r/w command response   Russell King - ARM Linux
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Russell King - ARM Linux
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Russell King - ARM Linux
• [PATCH] omap2+: pm: Fix section mismatch in pm_dbg_init()   Russell King - ARM Linux
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Russell King - ARM Linux
• Bug in _und_usr on dual-core ARM?   Russell King - ARM Linux
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   Russell King - ARM Linux
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Russell King - ARM Linux
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Russell King - ARM Linux
• Bug in _und_usr on dual-core ARM?   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   Russell King - ARM Linux
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Russell King - ARM Linux
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH 1/3] serial/imx: add device tree support   Russell King - ARM Linux
• [PATCH] ARM: quiet sparse noise due to __ARCH_WANT_SYS_RT_SIG(ACTION|SUSPEND)   Russell King - ARM Linux
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Russell King - ARM Linux
• i.MX consolidation patches   Russell King - ARM Linux
• i.MX consolidation patches   Russell King - ARM Linux
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Russell King - ARM Linux
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Russell King - ARM Linux
• [PATCH] Fix CPU spinlock lockups on secondary CPU bringup   Russell King - ARM Linux
• [PATCH 6/7] ARM: EXYNOS4: Add save/restore for more ARM registers   Russell King - ARM Linux
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Russell King - ARM Linux
• [PATCH 00/25 v2] Re-jig cpu_suspend for a saner calling convention   Russell King - ARM Linux
• [PATCH 01/25] ARM: pm: make MULTI_CPU and !MULTI_CPU resume paths the same   Russell King - ARM Linux
• [PATCH 02/25] ARM: pm: move return address (for cpu_resume) to top of stack   Russell King - ARM Linux
• [PATCH 03/25] ARM: pm: extract common code from MULTI_CPU/!MULTI_CPU paths   Russell King - ARM Linux
• [PATCH 04/25] ARM: pm: preserve r4 - r11 across a suspend   Russell King - ARM Linux
• [PATCH 05/25] ARM: pm: reallocate registers to avoid r2, r3   Russell King - ARM Linux
• [PATCH 06/25] ARM: pm: rejig suspend follow-on function calling convention   Russell King - ARM Linux
• [PATCH 07/25] ARM: pm: move sa1100 to use proper suspend func arg0   Russell King - ARM Linux
• [PATCH 08/25] ARM: pm: convert cpu_suspend() to a normal function   Russell King - ARM Linux
• [PATCH 09/25] ARM: pm: plat-s3c24xx: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 10/25] ARM: pm: sa1100: cleanup sa1100_cpu_suspend   Russell King - ARM Linux
• [PATCH 11/25] ARM: pm: mach-s5pv210: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 12/25] ARM: pm: mach-exynos4: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 13/25] ARM: pm: mach-s3c64xx: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 14/25] ARM: pm: pxa: cleanup PXA suspend code   Russell King - ARM Linux
• [PATCH 15/25] ARM: pm: sa1100: move cpu_suspend into C code   Russell King - ARM Linux
• [PATCH 16/25] ARM: pm: pxa: move cpu_suspend into C code   Russell King - ARM Linux
• i.MX consolidation patches   Russell King - ARM Linux
• [PATCH 17/25] ARM: pm: move cpu_init() call into core code   Russell King - ARM Linux
• [PATCH 18/25] ARM: pm: arrange for cpu_proc_init() to be called on resume   Russell King - ARM Linux
• [PATCH 19/25] ARM: pm: sa1100: no need to re-enable clock switching   Russell King - ARM Linux
• [PATCH 20/25] ARM: pm: samsung: move cpu_suspend into C code   Russell King - ARM Linux
• [PATCH 21/25] ARM: pm: samsung: no need to call flush_cache_all()   Russell King - ARM Linux
• [PATCH 22/25] ARM: pm: omap: no need to save all registers in sleep34xx.S   Russell King - ARM Linux
• [PATCH 23/25] ARM: pm: omap34xx: remove misleading comment and use of r9   Russell King - ARM Linux
• [PATCH 24/25] ARM: pm: ensure ARMv7 CPUs save and restore the TLS register   Russell King - ARM Linux
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Russell King - ARM Linux
• i.MX consolidation patches   Russell King - ARM Linux
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Russell King - ARM Linux
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Russell King - ARM Linux
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Russell King - ARM Linux
• [PATCH 00/25 v2] Re-jig cpu_suspend for a saner calling convention   Russell King - ARM Linux
• [PATCH 6/7] ARM: EXYNOS4: Add save/restore for more ARM registers   Russell King - ARM Linux
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Russell King - ARM Linux
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Russell King - ARM Linux
• parallel load of modules on an ARM multicore   Russell King - ARM Linux
• [PATCH 5/8] OMAP4: PM: TEMP: Prevent l3init from idling/force sleep   Russell King - ARM Linux
• [PATCH 00/25] Re-jig cpu_suspend for a saner calling convention   Russell King - ARM Linux
• [PATCH 01/25] ARM: pm: ensure ARMv7 CPUs save and restore the TLS register   Russell King - ARM Linux
• [PATCH 02/25] ARM: pm: arrange for cpu_proc_init() to be called on resume   Russell King - ARM Linux
• [PATCH 03/25] ARM: pm: sa1100: no need to re-enable clock switching   Russell King - ARM Linux
• [PATCH 04/25] ARM: pm: make MULTI_CPU and !MULTI_CPU resume paths the same   Russell King - ARM Linux
• [PATCH 05/25] ARM: pm: move return address (for cpu_resume) to top of stack   Russell King - ARM Linux
• [PATCH 06/25] ARM: pm: extract common code from MULTI_CPU/!MULTI_CPU paths   Russell King - ARM Linux
• [PATCH 07/25] ARM: pm: preserve r4 - r11 across a suspend   Russell King - ARM Linux
• [PATCH 08/25] ARM: pm: reallocate registers to avoid r2, r3   Russell King - ARM Linux
• [PATCH 09/25] ARM: pm: rejig suspend follow-on function calling convention   Russell King - ARM Linux
• [PATCH 10/25] ARM: pm: move sa1100 to use proper suspend func arg0   Russell King - ARM Linux
• [PATCH 11/25] ARM: pm: convert cpu_suspend() to a normal function   Russell King - ARM Linux
• [PATCH 12/25] ARM: pm: move cpu_init() call into core code   Russell King - ARM Linux
• [PATCH 13/25] ARM: pm: sa1100: move cpu_suspend into C code   Russell King - ARM Linux
• [PATCH 14/25] ARM: pm: plat-s3c24xx: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 15/25] ARM: pm: mach-s5pv210: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 16/25] ARM: pm: mach-exynos4: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 17/25] ARM: pm: mach-s3c64xx: cleanup s3c_cpu_save   Russell King - ARM Linux
• [PATCH 18/25] ARM: pm: samsung: move cpu_suspend into C code   Russell King - ARM Linux
• [PATCH 19/25] ARM: pm: samsung: no need to call flush_cache_all()   Russell King - ARM Linux
• [PATCH 20/25] ARM: pm: pxa: move cpu_suspend into C code   Russell King - ARM Linux
• [PATCH 21/25] ARM: pm: omap34xx: no need to save all registers in sleep34xx.S   Russell King - ARM Linux
• [PATCH 22/25] ARM: pm: omap34xx: remove misleading comment and use of r9   Russell King - ARM Linux
• [PATCH 23/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Russell King - ARM Linux
• [PATCH 24/25] ARM: pm: hide 1st and 2nd arguments to cpu_suspend from platform code   Russell King - ARM Linux
• [PATCH 25/25] ARM: pm: ensure our temporary page table entry is removed from the TLB   Russell King - ARM Linux
• [PATCH 23/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Russell King - ARM Linux
• [PATCH] OMAP3: PM: remove get_*_restore_pointer functions, directly use entry points   Russell King - ARM Linux
• [PATCH] ARM: amba: Link fb device to its parent   Russell King - ARM Linux
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Russell King - ARM Linux
• [PATCH] usb: fsl_udc_core: fix build breakage when building for ARM arch   Russell King - ARM Linux
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Russell King - ARM Linux
• [PATCH 2/2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCH 2/2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• IRQS off tracer - is it useful or not?   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Russell King - ARM Linux
• how to suspend on arm smp platform   Russell King - ARM Linux
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Russell King - ARM Linux
• [PATCH 1/1] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Russell King - ARM Linux
• [PATCH] Use MMIO clocksource for 32kHz counter   Russell King - ARM Linux
• Problem with GDB when debugging IRQ handlers   Russell King - ARM Linux
• IRQS off tracer - is it useful or not?   Russell King - ARM Linux
• Missing volatile in hard_smp_processor_id.   Russell King - ARM Linux
• [RFC 1/8] drivers: add generic remoteproc framework   Russell King - ARM Linux
• [PATCH 1/1] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Russell King - ARM Linux
• Problem with GDB when debugging IRQ handlers   Russell King - ARM Linux
• Problem with GDB when debugging IRQ handlers   Russell King - ARM Linux
• Problem with GDB when debugging IRQ handlers   Russell King - ARM Linux
• Problem with GDB when debugging IRQ handlers   Russell King - ARM Linux
• [RFC PATCH] MTD: atmel_nand: optimize read/write buffer functions   Russell King - ARM Linux
• Git pull request: 64-bit atomic user helper   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCH 2/4] ARM: remove unnecessary mach/hardware.h includes   Russell King - ARM Linux
• [PATCH 4/4] ARM: convert PCI defines to variables   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCH 00/23] entry assembly cleanups   Russell King - ARM Linux
• [PATCH 01/23] ARM: entry: remove unused irq_prio_table macro   Russell King - ARM Linux
• [PATCH 02/23] ARM: entry: shark: don't directly reference registers in macros   Russell King - ARM Linux
• [PATCH 03/23] ARM: entry: prefetch/data abort helpers: convert to macros   Russell King - ARM Linux
• [PATCH 00/23] entry assembly cleanups   Russell King - ARM Linux
• [PATCH 04/23] ARM: entry: prefetch/data abort helpers: avoid corrupting r4   Russell King - ARM Linux
• [PATCH 05/23] ARM: entry: abort-macro: specify registers to be used for macros   Russell King - ARM Linux
• [PATCH 06/23] ARM: entry: abort-macro: simplify do_ldrd_abort   Russell King - ARM Linux
• [PATCH 07/23] ARM: entry: no need to increase preempt count for IRQ handlers   Russell King - ARM Linux
• [PATCH 08/23] ARM: entry: no need to check parent IRQ mask in IRQ handler return   Russell King - ARM Linux
• [PATCH 09/23] ARM: entry: rejig register allocation in exception entry handlers   Russell King - ARM Linux
• [PATCH 10/23] ARM: entry: prefetch abort helper: pass aborted pc in r4 rather than r0   Russell King - ARM Linux
• [PATCH 11/23] ARM: entry: avoid enabling interrupts in prefetch/data abort handlers   Russell King - ARM Linux
• [PATCH 12/23] ARM: entry: instrument svc undefined exception handler with irqtrace   Russell King - ARM Linux
• [PATCH 13/23] ARM: entry: instrument usr exception handlers with irqsoff tracing   Russell King - ARM Linux
• [PATCH 14/23] ARM: entry: consolidate trace_hardirqs_off into (svc|usr)_entry macros   Russell King - ARM Linux
• [PATCH 15/23] ARM: entry: re-allocate registers in irq entry assembly macros   Russell King - ARM Linux
• [PATCH 16/23] ARM: entry: prefetch abort: tail-call the main prefetch abort handler   Russell King - ARM Linux
• [PATCH 17/23] ARM: entry: data abort: arrange for CPU abort helpers to take pc/psr in r4/r5   Russell King - ARM Linux
• [PATCH 18/23] ARM: entry: data abort: avoid using r2 in abort helpers   Russell King - ARM Linux
• [PATCH 19/23] ARM: entry: data abort: tail-call the main data abort handler   Russell King - ARM Linux
• [PATCH 20/23] ARM: entry: data abort: use r2 as base of pt_regs rather than stack   Russell King - ARM Linux
• [PATCH 21/23] ARM: entry: data abort: always use r6 for offset   Russell King - ARM Linux
• [PATCH 22/23] ARM: entry: data abort: ensure r5 is preserved by abort functions   Russell King - ARM Linux
• [PATCHv2 0/4] ARM: pmu: improve PMU type identification   Russell King - ARM Linux
• [PATCH 23/23] ARM: entry: no need to reload the SPSR value from struct pt_regs   Russell King - ARM Linux
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Russell King - ARM Linux
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Russell King - ARM Linux
• [RFC PATCH] MTD: atmel_nand: optimize read/write buffer functions   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCH] OMAP3: run the ASM sleep code from DDR   Russell King - ARM Linux
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Russell King - ARM Linux
• [PATCH] OMAP3: run the ASM sleep code from DDR   Russell King - ARM Linux
• [PATCH] OMAP3: run the ASM sleep code from DDR   Russell King - ARM Linux
• [PATCH 2/3] Samsung SoC: ready to use NTC value inside kernel   Russell King - ARM Linux
• [PATCH] mtd: OneNAND: samsung: Write DMA support   Russell King - ARM Linux
• [PATCH net-next] net: am79c961a: Omit check for multicast bit in netdev_for_each_mc_addr   Russell King - ARM Linux
• [PATCH 11/23] ARM: entry: avoid enabling interrupts in prefetch/data abort handlers   Russell King - ARM Linux
• [PATCH 3/7] ARM: SAMSUNG: Add SPI clock definitions for SAMSUNG SoCs   Russell King - ARM Linux
• Git pull request: 64-bit atomic user helper   Russell King - ARM Linux
• [PATCH v3] Add ARM cpu topology definition   Russell King - ARM Linux
• [PATCH] mtd: OneNAND: samsung: Write DMA support   Russell King - ARM Linux
• [PATCH] arm: platsmp: Allow secondary cpu hotplug with maxcpus=1   Russell King - ARM Linux
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Russell King - ARM Linux
• [PATCH 4/4] mmci: fixup sg buffer handling in pio_write   Russell King - ARM Linux
• reply: [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Russell King - ARM Linux
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Warner Losh
• [PATCH 4/4] ARM: zImage: allow supplementing appended DTB with traditional ATAG data   Warner Losh
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Luck, Tony
• [RFC PATCH 0/7] OMAP: mailbox: removing static declarations   Omar Ramirez Luna
• [RFC PATCH 1/7] OMAP2+: hwmod_data: define number of mailboxes   Omar Ramirez Luna
• [RFC PATCH 2/7] OMAP2+: devices: get the number of supported mailboxes   Omar Ramirez Luna
• [RFC PATCH 3/7] OMAP: mailbox: use OMAP's naming convention for devices   Omar Ramirez Luna
• [RFC PATCH 4/7] OMAP: mailbox: move framework functions under header file   Omar Ramirez Luna
• [RFC PATCH 5/7] OMAP: mailbox: implement dynamic mailbox configuration   Omar Ramirez Luna
• [RFC PATCH 6/7] OMAP1: mailbox: adapt to dynamic mailbox requests   Omar Ramirez Luna
• [RFC PATCH 7/7] OMAP2+: mailbox: remove mailbox static declarations   Omar Ramirez Luna
• 3.0-rc1: alsactl restore fails on spitz   Pavel Machek
• [linux-pm] [RFC PATCH v3] ARM hibernation/suspend-to-disk support   Pavel Machek
• MMC and reliable write - was: since when does ARM map the kernel memory in sections?   Pavel Machek
• [BUG] "sched: Remove rq->lock from the first half of ttwu()" locks up on ARM   Pavel Machek
• sdhci-esdhc-imx -- MMC 10x slower than it should be   Pavel Machek
• sdhci-esdhc-imx -- MMC 10x slower than it should be   Pavel Machek
• [PATCH V2] mmc: Enable the ADMA on esdhc imx driver   Pavel Machek
• [PATCH V2] mmc: Enable the ADMA on esdhc imx driver   Pavel Machek
• sdhci-esdhc-imx -- MMC 10x slower than it should be   Pavel Machek
• [PATCH] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Daniel Mack
• [stable] [PATCH] MTD: pxa3xx_nand: fix nand detection issue   Daniel Mack
• [PATCH v5] sdio: optimized SDIO IRQ handling for single irq   Daniel Mack
• [PATCH v5] sdio: optimized SDIO IRQ handling for single irq   Daniel Mack
• Trouble with newer kernels on Gumstix Overo boards   Daniel Mack
• Trouble with newer kernels on Gumstix Overo boards   Daniel Mack
• [PATCH] ARM: OMAP: Overo: remove illegal extra call to overo_ads7846_init()   Daniel Mack
• [PATCH] ARM: OMAP: Overo: remove duplicate call to overo_ads7846_init()   Daniel Mack
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Daniel Mack
• Trouble with newer kernels on Gumstix Overo boards   Daniel Mack
• Trouble with newer kernels on Gumstix Overo boards   Daniel Mack
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Daniel Mack
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Daniel Mack
• I can' t compile a new kernel version   Daniel Mack
• [PATCH 2/2] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Daniel Mack
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Daniel Mack
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ryan Mallon
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ryan Mallon
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ryan Mallon
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ryan Mallon
• [PATCH 1/3] PWM: add pwm framework support   Ryan Mallon
• [PATCH REPOST] ARM: Thumb-2: Relax relocation requirements for non-function symbols   Catalin Marinas
• A page fault causes exiting from WFI mode for all idling cores?   Catalin Marinas
• A page fault causes exiting from WFI mode for all idling cores?   Catalin Marinas
• [PATCH] arm: vexpress: move v2m clock init to init_early   Catalin Marinas
• [PATCH] Disable -fconserve-stack on ARM   Catalin Marinas
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Catalin Marinas
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Catalin Marinas
• [PATCH] fb.h: ARM uses __raw_{read/write}   Catalin Marinas
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Catalin Marinas
• [Linaro-mm-sig] [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Catalin Marinas
• DMA setup for ARM platform with hole low in memory   Catalin Marinas
• [PATCH v3 1/9] ARM: l2x0: fix disabling function to avoid deadlock   Catalin Marinas
• parallel load of modules on an ARM multicore   Catalin Marinas
• [RFC] Add Arm cpu topology definition   Catalin Marinas
• parallel load of modules on an ARM multicore   Catalin Marinas
• parallel load of modules on an ARM multicore   Catalin Marinas
• parallel load of modules on an ARM multicore   Catalin Marinas
• Problem with GDB when debugging IRQ handlers   Catalin Marinas
• Problem with GDB when debugging IRQ handlers   Catalin Marinas
• Problem with GDB when debugging IRQ handlers   Catalin Marinas
• Problem with GDB when debugging IRQ handlers   Catalin Marinas
• Problem with GDB when debugging IRQ handlers   Catalin Marinas
• Problem with GDB when debugging IRQ handlers   Catalin Marinas
• Problem with GDB when debugging IRQ handlers   Catalin Marinas
• Problem with GDB when debugging IRQ handlers   Catalin Marinas
• [PATCH REPOST] ARM: Thumb-2: Relax relocation requirements for non-function symbols   Dave Martin
• [PATCH REPOST] ARM: Thumb-2: Relax relocation requirements for non-function symbols   Dave Martin
• [PATCH] arm: vexpress: move v2m clock init to init_early   Dave Martin
• using identity_mapping_add & switching MMU state - how ?   Dave Martin
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Dave Martin
• [PATCH 06/11] ARM: cortex-a5: add HWCAP_VFPv4D16 to proc info structure   Dave Martin
• [PATCH 07/11] ARM: proc: add proc info for Cortex-A15MP using classic page tables   Dave Martin
• [PATCH 06/11] ARM: cortex-a5: add HWCAP_VFPv4D16 to proc info structure   Dave Martin
• [PATCH 4/6] ARM: reset: add reset functionality for jumping to a physical address   Dave Martin
• [PATCH] ARM: zImage: fix Thumb2 breakage   Dave Martin
• [PATCH] ARM: zImage: Add build-time check for correctly-sized proc_type entries   Dave Martin
• [PATCH v2 04/10] ARM: lib: add switch_stack function for safely changing stack   Dave Martin
• [PATCH v2 04/10] ARM: lib: add switch_stack function for safely changing stack   Dave Martin
• [RFC PATCH 0/2] ARM: Add a generic macro for declaring proc_info structs   Dave Martin
• [RFC PATCH 1/2] ARM: Add a generic macro for declaring proc_info structs   Dave Martin
• [RFC PATCH 2/2] ARM: proc-v7: Use the new proc_info declaration macro   Dave Martin
• [RFC PATCH 0/2] ARM: Add a generic macro for declaring proc_info structs   Dave Martin
• [RFC PATCH 0/2] ARM: Add a generic macro for declaring proc_info structs   Dave Martin
• [RFC PATCH 0/2] ARM: Add a generic macro for declaring proc_info structs   Dave Martin
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Dave Martin
• [RFC PATCH v2 0/5] Add generic macros for declaring various CPU structs   Dave Martin
• [RFC PATCH v2 1/5] ARM: mm: Add generic proc/arch struct definition macros   Dave Martin
• [RFC PATCH v2 2/5] ARM: proc-v7: Use new generic struct definition macros   Dave Martin
• [RFC PATCH v2 3/5] ARM: cache-v7: Use new generic struct definition macros   Dave Martin
• [RFC PATCH v2 4/5] ARM: proc-v6: Use new generic struct definition macros   Dave Martin
• [RFC PATCH v2 5/5] ARM: cache-v6: Use new generic struct definition macros   Dave Martin
• [RFC] kprobes with thumb2 conditional code   Dave Martin
• [RFC] kprobes with thumb2 conditional code   Dave Martin
• [RFC PATCH v2 1/5] ARM: mm: Add generic proc/arch struct definition macros   Dave Martin
• [RFC PATCH v2 0/5] Add generic macros for declaring various CPU structs   Dave Martin
• [RFC PATCH v2 0/5] Add generic macros for declaring various CPU structs   Dave Martin
• Dynamic patching in discarded sections   Dave Martin
• [RFC PATCH v2 1/5] ARM: mm: Add generic proc/arch struct definition macros   Dave Martin
• [PATCH 1/2] ARM: kuser: move interface documentation out of the source code   Dave Martin
• [PATCH 1/2] ARM: kuser: move interface documentation out of the source code   Dave Martin
• [PATCH 0/2] kuser helpers documentation cleanup and 64-bit cmpxchg   Dave Martin
• [PATCH 0/4] Consistently enter the kernel in ARM state   Dave Martin
• [PATCH 1/4] ARM: head: Always Enter the kernel in ARM state   Dave Martin
• [PATCH 2/4] ARM: head-nommu: Always enter the kernel in ARM state   Dave Martin
• [PATCH 3/4] ARM: zImage: Jump to the decompressed kernel entry point in ARM state   Dave Martin
• [PATCH 4/4] ARM: Documentation: clarify entry requirements for ARM versus Thumb-2   Dave Martin
• [PATCH 0/4] Consistently enter the kernel in ARM state   Dave Martin
• [PATCH v2] ARM: head, zImage: Always Enter the kernel in ARM state   Dave Martin
• Git pull request: 64-bit atomic user helper   Dave Martin
• [PATCH v3 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Dave Martin
• [PATCH v3 01/40] Subject: ARM: mm: proc-macros Add generic proc/cache/tlb struct definition macros   Dave Martin
• [PATCH v3 02/40] Subject: ARM: assembler.h: Add string declaration macro   Dave Martin
• [PATCH v3 03/40] Subject: ARM: mm: cache-fa: Use the new processor struct macros   Dave Martin
• [PATCH v3 04/40] Subject: ARM: mm: cache-v3: Use the new processor struct macros   Dave Martin
• [PATCH v3 05/40] Subject: ARM: mm: cache-v4: Use the new processor struct macros   Dave Martin
• [PATCH v3 06/40] Subject: ARM: mm: cache-v4wb: Use the new processor struct macros   Dave Martin
• [PATCH v3 07/40] Subject: ARM: mm: cache-v4wt: Use the new processor struct macros   Dave Martin
• [PATCH v3 08/40] Subject: ARM: mm: cache-v6: Use the new processor struct macros   Dave Martin
• [PATCH v3 09/40] Subject: ARM: mm: cache-v7: Use the new processor struct macros   Dave Martin
• [PATCH v3 10/40] Subject: ARM: mm: proc-arm1020: Use the new processor struct macros   Dave Martin
• [PATCH v3 11/40] Subject: ARM: mm: proc-arm1020e: Use the new processor struct macros   Dave Martin
• [PATCH v3 12/40] Subject: ARM: mm: proc-arm1022: Use the new processor struct macros   Dave Martin
• [PATCH v3 13/40] Subject: ARM: mm: proc-arm1026: Use the new processor struct macros   Dave Martin
• [PATCH v3 14/40] Subject: ARM: mm: proc-arm6_7: Use the new processor struct macros   Dave Martin
• [PATCH v3 15/40] Subject: ARM: mm: proc-arm720: Use the new processor struct macros   Dave Martin
• [PATCH v3 16/40] Subject: ARM: mm: proc-arm740: Use the new processor struct macros   Dave Martin
• [PATCH v3 17/40] Subject: ARM: mm: proc-arm7tdmi: Use the new processor struct macros   Dave Martin
• [PATCH v3 18/40] Subject: ARM: mm: proc-arm920: Use the new processor struct macros   Dave Martin
• [PATCH v3 19/40] Subject: ARM: mm: proc-arm922: Use the new processor struct macros   Dave Martin
• [PATCH v3 20/40] Subject: ARM: mm: proc-arm925: Use the new processor struct macros   Dave Martin
• [PATCH v3 21/40] Subject: ARM: mm: proc-arm926: Use the new processor struct macros   Dave Martin
• [PATCH v3 22/40] Subject: ARM: mm: proc-arm940: Use the new processor struct macros   Dave Martin
• [PATCH v3 23/40] Subject: ARM: mm: proc-arm946: Use the new processor struct macros   Dave Martin
• [PATCH v3 24/40] Subject: ARM: mm: proc-arm9tdmi: Use the new processor struct macros   Dave Martin
• [PATCH v3 25/40] Subject: ARM: mm: proc-fa526: Use the new processor struct macros   Dave Martin
• [PATCH v3 26/40] Subject: ARM: mm: proc-feroceon: Use the new processor struct macros   Dave Martin
• [PATCH v3 27/40] Subject: ARM: mm: proc-mohawk: Use the new processor struct macros   Dave Martin
• [PATCH v3 28/40] Subject: ARM: mm: proc-sa110: Use the new processor struct macros   Dave Martin
• [PATCH v3 29/40] Subject: ARM: mm: proc-sa1100: Use the new processor struct macros   Dave Martin
• [PATCH v3 30/40] Subject: ARM: mm: proc-v6: Use the new processor struct macros   Dave Martin
• [PATCH v3 31/40] Subject: ARM: mm: proc-v7: Use the new processor struct macros   Dave Martin
• [PATCH v3 32/40] Subject: ARM: mm: proc-xsc3: Use new generic struct definition macros   Dave Martin
• [PATCH v3 33/40] Subject: ARM: mm: proc-xscale: Use new generic struct definition macros   Dave Martin
• [PATCH v3 34/40] Subject: ARM: mm: tlb-fa: Use the new processor struct macros   Dave Martin
• [PATCH v3 35/40] Subject: ARM: mm: tlb-v3: Use the new processor struct macros   Dave Martin
• [PATCH v3 36/40] Subject: ARM: mm: tlb-v4: Use the new processor struct macros   Dave Martin
• [PATCH v3 37/40] Subject: ARM: mm: tlb-v4wb: Use the new processor struct macros   Dave Martin
• [PATCH v3 38/40] Subject: ARM: mm: tlb-v4wbi: Use the new processor struct macros   Dave Martin
• [PATCH v3 39/40] Subject: ARM: mm: tlb-v6: Use the new processor struct macros   Dave Martin
• [PATCH v3 40/40] Subject: ARM: mm: tlb-v7: Use the new processor struct macros   Dave Martin
• [PATCH v3 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Dave Martin
• [PATCH v3 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Dave Martin
• [PATCH v3 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Dave Martin
• [PATCH] Add tlv320aic32x4 platform data to Visstrim_M10.   Javier Martin
• [PATCH] s3c2410_udc: fix custom UDC command handling   Viliam Mateicka
• [PATCH] s3c2410_udc: fix custom UDC command handling   Viliam Mateicka
• [PATCH] s3c2410_udc: fix custom UDC command handling   Viliam Mateicka
• [PATCH] s3c2410_udc: fix custom UDC command handling   Viliam Mateicka
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Jon Mayo
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Jon Mayo
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Jon Mayo
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Jon Mayo
• [PATCH] ARM: report present cpus in /proc/cpuinfo   Jon Mayo
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Paul E. McKenney
• [next][bug] rcu_dyntick_kick_cpu() kills ARM SMP.   Paul E. McKenney
• [PATCH] OMAP3+: Kconfig: has EHCI only if USB present   Nishanth Menon
• [PATCH] OMAP3+: Kconfig: has EHCI only if USB present   Menon, Nishanth
• Duration of mdelay and udelay depends on MPU frequency in SMP   Menon, Nishanth
• Duration of mdelay and udelay depends on MPU frequency in SMP   Menon, Nishanth
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   Eric Miao
• [PATCH,RFC] mmp clockevent handling race   Eric Miao
• [PATCH,RFC] mmp clockevent handling race   Eric Miao
• [PATCH,RFC] mmp clockevent handling race   Eric Miao
• [PATCH,RFC] mmp clockevent handling race   Eric Miao
• [PATCH 2/3] ARM: pxa168: Add support for Ethernet   Eric Miao
• [PATCH] gpio/plat-pxa: fix clash with gpiolib namespace   Eric Miao
• [PATCH] gpio/plat-pxa: fix clash with gpiolib namespace   Eric Miao
• [PATCH] ARM: mx53: add pad configuration for I2C signals   Eric Miao
• [PATCH] scoop: drop pcmcia_init callback   Eric Miao
• [PATCH 1/3] pxa2xx vpac: pcmcia - free gpios on exist rather than requesting them again.   Eric Miao
• [PATCH 2/3] pxa2xx trizeps4: pcmcia remove unnecessary ifdefs   Eric Miao
• Slow spi_sync() on pxa2xx_spi   Eric Miao
• Slow spi_sync() on pxa2xx_spi   Eric Miao
• Slow spi_sync() on pxa2xx_spi   Eric Miao
• [PATCH] collie: don't read GPSR   Eric Miao
• [PATCH 3/3] ARM: pxa168: Add board support for gplugD   Eric Miao
• [PATCH] [RFC] USB: fsl_udc_core: fix build-failure for ARM   Eric Miao
• [PATCH 1/2] ARM: pxa910: correct nand pmu setting   Eric Miao
• [PATCH 2/2] ARM: pxa168: correct nand pmu setting   Eric Miao
• [PATCH 2/2] ARM: pxa168: correct nand pmu setting   Eric Miao
• [PATCH 2/2] ARM: pxa168: correct nand pmu setting   Eric Miao
• Slow spi_sync() on pxa2xx_spi   Eric Miao
• Slow spi_sync() on pxa2xx_spi   Eric Miao
• [PATCH 2/2] ARM: pxa168: correct nand pmu setting   Eric Miao
• [PATCH] usb: fsl_udc_core: fix build breakage when building for ARM arch   Eric Miao
• [PATCH] usb: fsl_udc_core: fix build breakage when building for ARM arch   Eric Miao
• [PATCH] ep93xx-eth: convert to phylib   David Miller
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   David Miller
• [PATCH] PCI: Make the struct pci_dev * argument of pci_fixup_irqs const.   David Miller
• [PATCH v3 1/5] ep93xx: set DMA masks for the ep93xx_eth   David Miller
• [PATCH v3 2/5] net: ep93xx_eth: pass struct device to DMA API functions   David Miller
• [PATCH v3 3/5] net: ep93xx_eth: allocate buffers using kmalloc()   David Miller
• [PATCH v3 4/5] net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()   David Miller
• [PATCH v3 5/5] net: ep93xx_eth: fix DMA API violations   David Miller
• [PATCH v2] NET: AX88796: Tighten up Kconfig dependencies   David Miller
• [PATCH] ARM: amba: Link fb device to its parent   Loïc Minier
• [PATCH 0/3] Improve MMC error handling (3rd rev)   Pawel Moll
• [PATCH 0/3] consolidate ARM refdesign LEDs   Pawel Moll
• [PATCH 0/4] drivers/iommu/ relocations   Ingo Molnar
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [PATCH V2 1/3] drivers/pwm st_pwm: Add support for ST's Pulse Width Modulator   Andrew Morton
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Jonathan Morton
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Jonathan Morton
• [PATCH 1/3] arm,tegra: replace cpu_set() with modern api   KOSAKI Motohiro
• [PATCH 2/3] arm,integrator: replace old cpumask functions with new one.   KOSAKI Motohiro
• [PATCH 3/3] arm: replace old cpumask functions with new one.   KOSAKI Motohiro
• mach-mxs pwm implementation question   Andreas Mueller
• [PATCH] Fix build warning of the defconfigs   Paul Mundt
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Paul Mundt
• [PATCH 8/10] drivers/video/imxfb.c: add missing clk_put   Paul Mundt
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Paul Mundt
• [PATCH] fb.h: ARM uses __raw_{read/write}   Paul Mundt
• [PATCH] PCI: Make the struct pci_dev * argument of pci_fixup_irqs const.   Paul Mundt
• [PATCH] ARM: amba: Link fb device to its parent   Paul Mundt
• [PATCH] ARM: amba: Link fb device to its parent   Paul Mundt
• [PATCH] arm: platsmp: Allow secondary cpu hotplug with maxcpus=1   Paul Mundt
• [PATCH 0/2] ARM: S5PV210: GONI board update for CIF camera support   Sylwester Nawrocki
• [PATCH 1/2] ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver   Sylwester Nawrocki
• [PATCH 2/2] ARM: S5PV210: Add support for NOON010PC30 sensor on GONI board   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS4: Set appropriate I2C device variant   Sylwester Nawrocki
• [PATCH 0/8] Fix module-mode enable sequence on OMAP4   Rajendra Nayak
• [PATCH 1/8] OMAP2+: clockdomain: Add an api to read idle mode   Rajendra Nayak
• [PATCH 2/8] OMAP2+: clockdomain: Add SoC support for clkdm_is_idle   Rajendra Nayak
• [PATCH 3/8] OMAP2+: PM: Initialise sleep_switch to a non-valid value   Rajendra Nayak
• [PATCH 4/8] OMAP2+: PM: idle clkdms only if already in idle   Rajendra Nayak
• [PATCH 5/8] OMAP4: PM: TEMP: Prevent l3init from idling/force sleep   Rajendra Nayak
• [PATCH 6/8] OMAP2+: hwmod: Follow the recomended PRCM clock enable sequence   Rajendra Nayak
• [PATCH 7/8] OMAP: clock: Add flags to identify optional clock nodes   Rajendra Nayak
• [PATCH 8/8] OMAP: clock: Enable clockdomain only for optional clocks   Rajendra Nayak
• [PATCH 1/8] OMAP2+: clockdomain: Add an api to read idle mode   Rajendra Nayak
• [PATCH 4/8] OMAP2+: PM: idle clkdms only if already in idle   Rajendra Nayak
• [PATCH 4/8] OMAP2+: PM: idle clkdms only if already in idle   Rajendra Nayak
• [PATCH 02/10] lib: genalloc: Generic allocator improvements   Michal Nazarewicz
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [PATCH 1/8] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Michal Nazarewicz
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [RFC 2/8] remoteproc: add omap implementation   Will Newton
• [PATCH v4 5/5] ARM: mmp2: update mmp2_defconfig to support mmc   Sachin Nikam
• [PATCH v4 5/5] ARM: mmp2: update mmp2_defconfig to support mmc   Sachin Nikam
• [RFC 1/2] omap: mcbsp: Drop SPI mode support   Jarkko Nikula
• [PATCH v3 0/3] davinci: ioremap SRAM instead of iotables   Nori, Sekhar
• [PATCH V2] davinci: da850: move input frequency to board specific files   Nori, Sekhar
• [PATCH 1/3] davinci: dm646x.h: include header files under mach/ after those in linux/   Sekhar Nori
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Sekhar Nori
• [PATCH v3 3/3] davinci: da850: move input frequency to board specific files   Sekhar Nori
• [PATCH 1/1] davinci: dm646x: move vpif related code to driver core header from platform   Nori, Sekhar
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Nori, Sekhar
• [PATCH 1/3] davinci: dm646x.h: include header files under mach/ after those in linux/   Sekhar Nori
• [PATCH v2 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Sekhar Nori
• [PATCH v3 3/3] davinci: da850: move input frequency to board specific files   Sekhar Nori
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Nori, Sekhar
• [PATCH] davinci: make PCM platform devices static   Sekhar Nori
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Nori, Sekhar
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Nori, Sekhar
• [PATCH V2] davinci: da850: move input frequency to board specific files   Nori, Sekhar
• TI-Davinci 6446 oops on interrupts   Nori, Sekhar
• [GIT PULL] DaVinci fixes for v3.0-rc   Nori, Sekhar
• [PATCH V2] davinci: da850: move input frequency to board specific files   Nori, Sekhar
• [PATCH V2] davinci: da850: move input frequency to board specific files   Nori, Sekhar
• [PATCH V2] davinci: da850: move input frequency to board specific files   Nori, Sekhar
• [PATCH] davinci: da850 EVM: read mac address from SPI flash   Nori, Sekhar
• [PATCH 1/1] davinci: dm646x: move vpif related code to driver core header from platform   Nori, Sekhar
• [RFC 5/8] remoteproc: add davinci implementation   Nori, Sekhar
• [PATCH 1/4] davinci: psc.h: clean up indentation done using spaces   Nori, Sekhar
• [PATCH 1/4] davinci: psc.h: clean up indentation done using spaces   Nori, Sekhar
• [RFC 5/8] remoteproc: add davinci implementation   Nori, Sekhar
• [PATCH] davinci: da850: add a .set_rate method to ref_clk   Nori, Sekhar
• [PATCH 1/4] davinci: psc.h: clean up indentation done using spaces   Nori, Sekhar
• [RFC PATCH v4] Consolidate SRAM support   Nori, Sekhar
• No subject   John Ogness
• [PATCH] msm: timer: compensate for timer shift in msm_read_timer_count   Jeff Ohlstein
• [PATCH v2] msm: timer: compensate for timer shift in msm_read_timer_count   Jeff Ohlstein
• plat-orion gpio regression for edge-sensitive on mv78xx0   Joey Oravec
• [PATCH] plat-iop: fixes fail to build from source   Hector Oron
• No subject   Hector Oron
• [PATCH] plat-iop: fixes fail to build from source   Hector Oron
• I can' t compile a new kernel version   Jorge Yesid Rios Ortiz
• [PATCH 1/2] mfd/ab3550: Use kstrtoul_from_user   Samuel Ortiz
• [PATCH 1/3] [v2] davinci: sram: ioremap the davinci_soc_info specified sram regions   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH RFC] at91: Use "pclk" as con_id on at91cap9 and at91rm9200   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Consolidate the clkdev header files   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] atmel_serial: keep the platform_device unchanged   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] [media] at91: add Atmel Image Sensor Interface (ISI) support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/9] Add clkdev support for Samsung platforms   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ATMEL, AVR32: inline nand partition table access   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] atmel_serial: keep the platform_device unchanged   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] atmel_serial: keep the platform_device unchanged   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] atmel_serial: fix internal port num   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: fix udc, ehci and mmc clock device name for cap9/9g45/9rl   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: fix at91_set_serial_console: use platform device id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/23] entry assembly cleanups   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] MTD: atmel_nand: fix wrong use of 0 as NULL   Jean-Christophe PLAGNIOL-VILLARD
• [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.   Praveen Paneri
• [RFC][PATCH 1/5] USB: DWC OTG: Modification in DWC OTG driver for ARM based SoCs.   Praveen Paneri
• [RFC][PATCH 3/5] ARM: SAMSUNG: Adding IO mapping for OTG PHY.   Praveen Paneri
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   Praveen Paneri
• [RFC][PATCH 0/5] USB: DWC OTG: Add dwc_otg driver for S5P6440 samsung SoC.   Praveen Paneri
• [RFC][PATCH 0/5] USB: DWC OTG: Add dwc_otg driver for S5P6440 samsung SoC.   Praveen Paneri
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   Praveen Paneri
• Trouble with newer kernels on Gumstix Overo boards   Vladimir Pantelic
• [PATCH 1/5] CPUFREQ/S3C64xx: Move S3C64xx CPUfreq driver into drivers/cpufreq   Kyungmin Park
• [PATCH] [CPUFREQ] Move ARM Samsung cpufreq drivers to drivers/cpufreq/   Kyungmin Park
• [PATCH] gpio: ep93xx: move driver to drivers/gpio   Kyungmin Park
• [PATCH] ARM: exynos4: fix secondary CPU boot   Kyungmin Park
• [PATCH] ARM: exynos4: fix secondary CPU boot   Kyungmin Park
• [PATCH] ARM: samsung: Remove unused onenand plat functions   Kyungmin Park
• [PATCH] ARM: exynos4: remove compiler warning: 'exynos4_pwm4_resume'   Kyungmin Park
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Kyungmin Park
• [PATCH 4/5] ARM: S3C6410: Support 800MHz operation in cpufreq   Kyungmin Park
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Kyungmin Park
• [RFC 0/6] iommu: generic api migration and grouping   Kyungmin Park
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Kyungmin Park
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Kyungmin Park
• [PATCH] ARM: EXYNOS4: Fix incorrect mapping of gpio pull-up macro to register setting   Kyungmin Park
• [PATCH] Consolidate the clkdev header files   Kyungmin Park
• [PATCH] ARM: S5PV210: Fix build breakage due to renaming of S3C_VA_USB_HSPHY   Kyungmin Park
• [PATCH v2 0/4] Samsung: Move Samsung SoCs GPIO drivers to drivers/gpio   Kyungmin Park
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Kyungmin Park
• [PATCH] ARM: exynos4: fix secondary CPU boot   Kyungmin Park
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Kyungmin Park
• [PATCH 0/7] ARM: EXYNOS4: Adds External GIC   Kyungmin Park
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   Kyungmin Park
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Kyungmin Park
• [PATCH] ARM: exynos4: fix secondary CPU boot   Kyungmin Park
• [PATCH REPOST] pxa/hx4700: Add ASIC3 LED support   Paul Parsons
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Subash Patel
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Subash Patel
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Subash Patel
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Subash Patel
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Subash Patel
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Subash Patel
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Joe Perches
• [PATCH] arm: fix regression in ixp4xx clocksource   Mikael Pettersson
• [PATCH] arm: fix regression in ixp4xx clocksource   Mikael Pettersson
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Zach Pfeffer
• [Linaro-mm-sig] [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Zach Pfeffer
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Zach Pfeffer
• A page fault causes exiting from WFI mode for all idling cores?   Lorenzo Pieralisi
• using identity_mapping_add & switching MMU state - how ?   Lorenzo Pieralisi
• [PATCH] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Lorenzo Pieralisi
• [PATCH 2/3] ARM: gic: Use cpu pm notifiers to save gic state   Lorenzo Pieralisi
• [PATCH] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Lorenzo Pieralisi
• [PATCH 09/11] ARM: perf: add PMUv2 common event definitions   Jean Pihet
• [Patch v2 09/11] ARM: perf: add PMUv2 common event definitions   Jean Pihet
• [Patch v2 09/11] ARM: perf: add PMUv2 common event definitions   Jean Pihet
• [RFC/PATCH] OMAP PM: remove OMAP_PM_NONE config option   Jean Pihet
• [PATCH 23/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Jean Pihet
• [PATCH 00/25] Re-jig cpu_suspend for a saner calling convention   Jean Pihet
• [PATCH] OMAP3: PM: remove get_*_restore_pointer functions, directly use entry points   Jean Pihet
• [PATCHv2 0/4] ARM: pmu: improve PMU type identification   Jean Pihet
• [PATCH] OMAP3: run the ASM sleep code from DDR   Jean Pihet
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Laurent Pinchart
• [PATCH v3 2/2] omap3: iovmm: Support non page-aligned buffers in iommu_vmap   Laurent Pinchart
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Laurent Pinchart
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Laurent Pinchart
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Laurent Pinchart
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Laurent Pinchart
• [RFC 2/6] omap: iovmm: generic iommu api migration   Laurent Pinchart
• [RFC 1/6] omap: iommu: generic iommu api migration   Laurent Pinchart
• [RFC 2/6] omap: iovmm: generic iommu api migration   Laurent Pinchart
• [RFC 1/6] omap: iommu: generic iommu api migration   Laurent Pinchart
• [PATCH v3 1/2] omap3: iovmm: Work around sg_alloc_table size limitation in IOMMU   Laurent Pinchart
• [RFC 2/6] omap: iovmm: generic iommu api migration   Laurent Pinchart
• [PATCH] omap: iovmm: s/sg_dma_len(sg)/sg->length/   Laurent Pinchart
• [PATCH 0/2] sdio: make sdio_single_irq optional due to suprious IRQ   Nicolas Pitre
• [PATCH 2/2] sdio: report error if pending IRQ but none function bits   Nicolas Pitre
• [PATCH v2 0/2] sdio: add quirk for spurious SDIO IRQ   Nicolas Pitre
• [PATCH] ARM: Make sure appended device tree data won't overlap kernel BSS   Nicolas Pitre
• [PATCH,RFC] mmp clockevent handling race   Nicolas Pitre
• Dynamic patching in discarded sections   Nicolas Pitre
• [PATCH] ARM: DT: don't try to access physical address zero   Nicolas Pitre
• [PATCH] ARM: zImage: fix Thumb2 breakage   Nicolas Pitre
• [PATCH v2] ARM: kirkwood: Add support for Buffalo LS-XHL   Nicolas Pitre
• [PATCH] ARM: zImage: Add build-time check for correctly-sized proc_type entries   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 1/3] ARM: zImage: ensure it is always a multiple of 64 bits in size   Nicolas Pitre
• [PATCH 2/3] ARM: zImage: Allow the appending of a device tree binary   Nicolas Pitre
• [PATCH 3/3] ARM: zImage: make sure appended DTB doesn't get overwritten by kernel .bss   Nicolas Pitre
• [PATCH] ARM: Make sure appended device tree data won't overlap kernel BSS   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 1/3] ARM: zImage: ensure it is always a multiple of 64 bits in size   Nicolas Pitre
• [PATCH 2/3] ARM: zImage: Allow the appending of a device tree binary   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 00/14] Re-jig cpu_suspend for a saner calling convention   Nicolas Pitre
• [PATCH 03/14] ARM: suspend: extract common code from MULTI_CPU/!MULTI_CPU paths   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Nicolas Pitre
• [PATCH] Support multiple MEM tags with atags->fdt conversion   Nicolas Pitre
• [PATCH] Support multiple MEM tags with atags->fdt conversion   Nicolas Pitre
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Nicolas Pitre
• [RFC PATCH v2 1/5] ARM: mm: Add generic proc/arch struct definition macros   Nicolas Pitre
• Dynamic patching in discarded sections   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH 0/2] kuser helpers documentation cleanup and 64-bit cmpxchg   Nicolas Pitre
• [PATCH 1/2] ARM: kuser: move interface documentation out of the source code   Nicolas Pitre
• [PATCH 2/2] ARM: add a kuser_cmpxchg64 user space helper   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [RFC PATCH v2 1/5] ARM: mm: Add generic proc/arch struct definition macros   Nicolas Pitre
• [PATCH][Trivial] ARM: remove duplicate include from arch/arm/mach-dove/common.c   Nicolas Pitre
• [PATCH] Support multiple MEM tags with atags->fdt conversion   Nicolas Pitre
• [PATCH 1/2] ARM: kuser: move interface documentation out of the source code   Nicolas Pitre
• [PATCH 0/2] kuser helpers documentation cleanup and 64-bit cmpxchg   Nicolas Pitre
• [PATCH 0/4] Consistently enter the kernel in ARM state   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• Git pull request: 64-bit atomic user helper   Nicolas Pitre
• [PATCH 0/4] allow DTB to be appended to the ARM zImage with ATAG conversion   Nicolas Pitre
• [PATCH 1/4] ARM: zImage: ensure it is always a multiple of 64 bits in size   Nicolas Pitre
• [PATCH 2/4] ARM: zImage: Allow the appending of a device tree binary   Nicolas Pitre
• [PATCH 3/4] ARM: zImage: make sure appended DTB doesn't get overwritten by kernel .bss   Nicolas Pitre
• [PATCH 4/4] ARM: zImage: allow supplementing appended DTB with traditional ATAG data   Nicolas Pitre
• [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req   Nicolas Pitre
• [PATCH v6 02/11] omap_hsmmc: add support for pre_req and post_req   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• [PATCH 4/4] ARM: zImage: allow supplementing appended DTB with traditional ATAG data   Nicolas Pitre
• [PATCH 1/3] leds: create a trigger for ARM CPU activity   Nicolas Pitre
• [PATCH v3 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Nicolas Pitre
• [PATCH v3 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Nicolas Pitre
• [PATCH] ARM: amba: Link fb device to its parent   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• IRQS off tracer - is it useful or not?   Nicolas Pitre
• [PATCH v2] ARM: sort the meminfo array earlier   Nicolas Pitre
• [PATCH 0/3] Add generic idle notifiers   Nicolas Pitre
• [PATCH 0/3] Add generic idle notifiers   Nicolas Pitre
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Nicolas Pitre
• Git pull request: 64-bit atomic user helper   Nicolas Pitre
• [PATCH] ARM: mach-s3c24a0: delete   Nicolas Pitre
• Git pull request: 64-bit atomic user helper   Nicolas Pitre
• [PATCH] ARM: mach-s3c24a0: delete   Nicolas Pitre
• [PATCH] ARM: mach-s3c24a0: delete   Nicolas Pitre
• [RFC PATCH 0/4] ARM: make mach/hardware.h optional   Nicolas Pitre
• Git pull request: 64-bit atomic user helper   Nicolas Pitre
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Poddar, Sourav
• [PATCH] ARM: omap4: gpio: fix setting IRQWAKEN bits   Todd Poynor
• [PATCH 1/8] OMAP2+: clockdomain: Add an api to read idle mode   Todd Poynor
• [PATCH 4/8] OMAP2+: PM: idle clkdms only if already in idle   Todd Poynor
• IRQS off tracer - is it useful or not?   Todd Poynor
• [PATCH 0/3] Add generic idle notifiers   Todd Poynor
• [PATCH 1/3] Move x86_64 idle notifiers to generic   Todd Poynor
• [PATCH 2/3] ARM: Call idle notifiers   Todd Poynor
• [PATCH 3/3] ARM: Move leds idle start/stop calls to idle notifiers   Todd Poynor
• [PATCH] OMAP3+: Kconfig: has EHCI only if USB present   Premi, Sanjeev
• [PATCH] omap3evm: Add Mistral WL12XX config support   Premi, Sanjeev
• [PATCH] omap3: pm: Downgrade WARN for no wakeup source   Sanjeev Premi
• [PATCH] omap3: pm: Downgrade WARN for no wakeup source   Premi, Sanjeev
• [PATCH] omap3: pm: Downgrade WARN for no wakeup source   Premi, Sanjeev
• [PATCH] omap2+: pm: Fix section mismatch in pm_dbg_init()   Sanjeev Premi
• [PATCH 1/2] config: omap2+: force fb and dss support as built-in   Premi, Sanjeev
• [PATCH 1/2] config: omap2+: force fb and dss support as built-in   Premi, Sanjeev
• Trouble with newer kernels on Gumstix Overo boards   Premi, Sanjeev
• [PATCH 0/2] omap2+: pm: Fix code syntax and BogoMIPS   Sanjeev Premi
• [PATCH 1/2] omap2+: pm: Use if...else instead of goto   Sanjeev Premi
• [PATCH 2/2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Sanjeev Premi
• [PATCH 2/2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCH 2/2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCH 2/2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCH 1/2] omap2+: pm: Use if...else instead of goto   Premi, Sanjeev
• [PATCH 1/2] omap2+: pm: Use if...else instead of goto   Premi, Sanjeev
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Sanjeev Premi
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Sanjeev Premi
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Premi, Sanjeev
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Premi, Sanjeev
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Premi, Sanjeev
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Premi, Sanjeev
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Premi, Sanjeev
• [PATCHv2] omap3: beagle: Use GPTIMER1 for clockevents   Sanjeev Premi
• [PATCHv2] omap3: beagle: Use GPTIMER1 for clockevents   Premi, Sanjeev
• [PATCHv2] omap3: beagle: Use GPTIMER1 for clockevents   Premi, Sanjeev
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Premi, Sanjeev
• Problem with GDB when debugging IRQ handlers   Yao Qi
• [PATCH] davinci: da850 EVM: read mac address from SPI flash   Rajashekhara, Sudhakar
• [PATCH] davinci: da850 EVM: read mac address from SPI flash   Rajashekhara, Sudhakar
• [RFC] dmaengine: add new api for preparing simple slave transfer   Raju, Sundaram
• [RFC] dmaengine: add new api for preparing simple slave transfer   Raju, Sundaram
• [RFC] dmaengine: add new api for preparing simple slave transfer   Raju, Sundaram
• [RFC] dmaengine: add new api for preparing simple slave transfer   Raju, Sundaram
• [RFC] dmaengine: add new api for preparing simple slave transfer   Raju, Sundaram
• [RFC] dmaengine: add new api for preparing simple slave transfer   Raju, Sundaram
• [RFC] dmaengine: add new api for preparing simple slave transfer   Raju, Sundaram
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   Philip Rakity
• [PATCH v3 0/3] provide sdhci driver for mmp2 and pxa910   Philip Rakity
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   Philip Rakity
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   Philip Rakity
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   Philip Rakity
• [PATCH v2 1/3] mmc: support sdhci-mmp2   Philip Rakity
• [PATCH v2 1/3] mmc: support sdhci-mmp2   Philip Rakity
• [PATCH v4 2/5] mmc: support sdhci-pxav2.c   Philip Rakity
• [PATCH v4 2/5] mmc: support sdhci-pxav2.c   Philip Rakity
• [PATCH v3 1/4] mmc: sdhci: fix interrupt storm from card detection   Philip Rakity
• [PATCH v4 1/4] mmc: sdhci: fix interrupt storm from card detection   Philip Rakity
• [PATCH v4 1/4] mmc: sdhci: fix interrupt storm from card detection   Philip Rakity
• [PATCH] ARM: tegra/harmony: enable USB host ports   Mike Rapoport
• [PATCH] mmci: Fix checkpatch warnings   Sebastian Rasmussen
• linux2.6.35 porting on S3C2416 (USB Host controller driver is not comming Up.)   Ravi
• not able to use the datacard USB modem with ARM9 baord   Ravi
• framebuffer for ST7565R chip set   Ravi
• USB serial Gadget is not working under WindowsXp   Ravi
• [RFC] Add Arm cpu topology definition   Christian Robottom Reis
• [Solved] Re: Freescale i.mx25 SDIO/Libertas issue   Andre Renaud
• [PATCH V2] davinci: da850: move input frequency to board specific files   Christian Riesch
• [PATCH] davinci: da850: add a .set_rate method to ref_clk   Christian Riesch
• [PATCH v2] davinci: da850: add a .set_rate method to ref_clk   Christian Riesch
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Guenter Roeck
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Guenter Roeck
• [Linaro-mm-sig] [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   'Joerg Roedel'
• [RFC 0/6] iommu: generic api migration and grouping   Roedel, Joerg
• [RFC 0/6] iommu: generic api migration and grouping   Roedel, Joerg
• [RFC 0/6] iommu: generic api migration and grouping   Roedel, Joerg
• [RFC 0/6] iommu: generic api migration and grouping   Roedel, Joerg
• [RFC 0/6] iommu: generic api migration and grouping   Roedel, Joerg
• [PATCH 0/4] drivers/iommu/ relocations   Roedel, Joerg
• [PATCH 4/4] x86: intel-iommu: move to drivers/iommu/   Roedel, Joerg
• [PATCH 0/4] drivers/iommu/ relocations   Roedel, Joerg
• [PATCH v2 0/4] drivers/iommu/ relocations   Roedel, Joerg
• [PATCH v2 0/4] drivers/iommu/ relocations   Roedel, Joerg
• [PATCH v2 4/4] x86/ia64: intel-iommu: move to drivers/iommu/   Roedel, Joerg
• [PATCH v2 0/4] drivers/iommu/ relocations   Joerg Roedel
• [PATCH 1/2] iommu: Move iommu Kconfig entries to submenu   Joerg Roedel
• [PATCH 2/2] iommu/amd: Move missing parts to drivers/iommu   Joerg Roedel
• [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Joerg Roedel
• IRQS off tracer - is it useful or not?   Frank Rowand
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Rusty Russell
• [RFC PATCH 10/15] ARM: perf: add type field to struct arm_pmu   Mark Rutland
• [PATCH 0/2] ARM PMU reservation cleanup   Mark Rutland
• [PATCH 1/2] ARM: pmu: refactor reservation   Mark Rutland
• [PATCH 2/2] ARM: pmu: reject duplicate PMU registrations   Mark Rutland
• [PATCH 1/3] ARM: pmu: add OF probing support   Mark Rutland
• [PATCH 0/4] ARM: pmu: improve PMU type identification   Mark Rutland
• [PATCH 1/4] ARM: pmu: refactor reservation   Mark Rutland
• [PATCH 2/4] ARM: pmu: reject duplicate PMU registrations   Mark Rutland
• [PATCH 3/4] ARM: pmu: add OF probing support   Mark Rutland
• [PATCH 4/4] ARM: pmu: add platform_device_id table support   Mark Rutland
• [PATCH 4/4] ARM: pmu: add platform_device_id table support   Mark Rutland
• [PATCH 3/4] ARM: pmu: add OF probing support   Mark Rutland
• [PATCHv2 0/4] ARM: pmu: improve PMU type identification   Mark Rutland
• [PATCHv2 1/4] ARM: pmu: refactor reservation   Mark Rutland
• [PATCHv2 2/4] ARM: pmu: reject duplicate PMU registrations   Mark Rutland
• [PATCHv2 3/4] ARM: pmu: add OF probing support   Mark Rutland
• [PATCHv2 4/4] ARM: pmu: add platform_device_id table support   Mark Rutland
• [RFC PATCH 13/15] ARM: perf: remove event limit from pmu_hw_events   Mark Rutland
• [PATCH v2 3/4] ARM: mxc: migrate mach-imx gpio driver to gpio-mxc   Philippe Rétornaz
• [PATCH v4 03/12] omap_hsmmc: add support for pre_req and post_req   S, Venkatraman
• [PATCH v4 02/12] omap_hsmmc: use original sg_len for dma_unmap_sg   S, Venkatraman
• [PATCH v4 00/12] mmc: use nonblock mmc requests to minimize latency   S, Venkatraman
• [PATCH v7 01/11] mmc: add non-blocking mmc request function   Venkatraman S
• [PATCH v7 01/11] mmc: add non-blocking mmc request function   S, Venkatraman
• [PATCH v7 01/11] mmc: add non-blocking mmc request function   S, Venkatraman
• [PATCH] OMAP: HSMMC: Fix GPIO muxing   S, Venkatraman
• [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support   S, Venkatraman
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   S, Venkatraman
• [PATCH 2/2] amba pl011: platform data for reg lockup and glitch   Shreshtha Kumar SAHU
• [PATCH 1/1] fix epit sched clock plat-mxc 2.6.39   Tim Sander
• [PATCH] Fix build warning of the defconfigs   Wolfram Sang
• [RFC] mmc: Enable the ADMA on esdhc imx driver   Wolfram Sang
• [PATCH V1] mmc: Enable the ADMA on esdhc imx driver   Wolfram Sang
• [PATCH 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Wolfram Sang
• [PATCH 1/4] mmc: sdhci: fix interrupt storm from card detection   Wolfram Sang
• [PATCH 3/4] mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP   Wolfram Sang
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Wolfram Sang
• [PATCH 1/4] mmc: sdhci: fix interrupt storm from card detection   Wolfram Sang
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Wolfram Sang
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Wolfram Sang
• sdhci-esdhc-imx -- MMC 10x slower than it should be   Wolfram Sang
• [PATCH V2] mmc: Enable the ADMA on esdhc imx driver   Wolfram Sang
• [PATCH v2 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Wolfram Sang
• [PATCH v2 4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5   Wolfram Sang
• [PATCH V2] mmc: Enable the ADMA on esdhc imx driver   Wolfram Sang
• [PATCH V2] mmc: Enable the ADMA on esdhc imx driver   Wolfram Sang
• [PATCH 1/3] serial/imx: add device tree support   Wolfram Sang
• [V3 PATCH] mmc: Enable the ADMA on esdhc imx driver   Wolfram Sang
• GIT pull request - lpc32xx core updates   Wolfram Sang
• [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Wolfram Sang
• [PATCH v3 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared   Wolfram Sang
• [PATCH 6/6] ARM: mxc: clean up imx-dma device registration   Wolfram Sang
• [PATCH] arm: mach-vt8500: add forgotten irq_data conversion   Wolfram Sang
• [PATCH 6/6] ARM: mxc: clean up imx-dma device registration   Wolfram Sang
• [PATCH 1/2] rtc: vt8500: cleanup rtc_class_ops->update_irq_enable()   Wolfram Sang
• [PATCH 2/2] rtc: vt8500: use define instead of hardcoded value for status bit   Wolfram Sang
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Wolfram Sang
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Wolfram Sang
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Wolfram Sang
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Wolfram Sang
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Wolfram Sang
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Wolfram Sang
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Wolfram Sang
• [PATCH v7 0/3] add the GPMI controller driver for IMX23/IMX28   Wolfram Sang
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Wolfram Sang
• Slow spi_sync() on pxa2xx_spi   Stefan Schmidt
• Slow spi_sync() on pxa2xx_spi   Stefan Schmidt
• Slow spi_sync() on pxa2xx_spi   Stefan Schmidt
• Slow spi_sync() on pxa2xx_spi   Stefan Schmidt
• Slow spi_sync() on pxa2xx_spi   Stefan Schmidt
• Slow spi_sync() on pxa2xx_spi   Stefan Schmidt
• i.MX consolidation patches   Matt Sealey
• i.MX consolidation patches   Matt Sealey
• [RFC PATCH 12/16] ARM: watchdog: make mpcore_wdt independant from asm/smp_twd.h   Wim Van Sebroeck
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Wim Van Sebroeck
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Wim Van Sebroeck
• [MPCore Watchdog]: Convert from misc_dev to dynamic device node.   Wim Van Sebroeck
• [PATCH 3/6] watchdog: s3c2410: Add support for device tree based probe   Wim Van Sebroeck
• Hello Would You Like To Earn   Sharon.Burns
• Hello Would You Like To Earn   Sharon.Burns
• Hello Would You Like To Earn   Sharon.Burns
• Hello Would You Like To Earn   Sharon.Burns
• Hello Would You Like To Earn   Sharon.Burns
• Hello Would You Like To Earn   Sharon.Burns
• Hello Would You Like To Earn   Sharon.Burns
• Hello Would You Like To Earn   Sharon.Burns
• [PATCH V4 0/3] add the GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCH V4 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCH V4 2/3] ARM: mxs: add GPMI-NFC device for imx23   Huang Shijie
• [PATCH V4 3/3] ARM: mxs: add GPMI-NFC device for imx28   Huang Shijie
• [PATCH V4 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCH v7 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v7 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Huang Shijie
• [PATCH v7 2/3] MTD : add support for imx23 and imx28   Huang Shijie
• [PATCH v7 3/3] MTD : add GPMI-NFC driver in the config and Makefile   Huang Shijie
• [PATCH V4 2/3] ARM: mxs: add GPMI-NFC device for imx23   Huang Shijie
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Huang Shijie
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Huang Shijie
• [PATCH v5 0/3] add the GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCH v5 2/3] ARM: mxs/mx23evk: add GPMI-NFC device   Huang Shijie
• [PATCH v5 3/3] ARM: mxs/mx28evk: add GPMI-NFC device   Huang Shijie
• [PATCH v5 2/3] ARM: mxs/mx23evk: add GPMI-NFC device   Huang Shijie
• reply: [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Huang Shijie-B32955
• reply: [PATCH v7 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie-B32955
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie-B32955
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Santosh Shilimkar
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Santosh Shilimkar
• [GIT PULL] scalable TWD localtimer   Santosh Shilimkar
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Santosh Shilimkar
• [GIT PULL] scalable TWD localtimer   Santosh Shilimkar
• [PATCH 1/2] cleanup regulator supply definitions in mach-omap2 to use REGULATOR_SUPPLY   Santosh Shilimkar
• [PATCH] ARM: omap4: gpio: fix setting IRQWAKEN bits   Santosh Shilimkar
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Santosh Shilimkar
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Santosh Shilimkar
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Santosh Shilimkar
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Santosh Shilimkar
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Santosh Shilimkar
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Santosh Shilimkar
• [PATCH] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Santosh Shilimkar
• [PATCH] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Santosh Shilimkar
• [PATCH 0/3] CPU PM notifiers   Santosh Shilimkar
• [RFC PATCH 07/16] ARM: local timers: move OMAP4 to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Santosh Shilimkar
• [RFC PATCH 07/16] ARM: local timers: move OMAP4 to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [RFC PATCH] ARM: smp: Fix the CPU hotplug race with scheduler.   Santosh Shilimkar
• [PATCH 00/25 v2] Re-jig cpu_suspend for a saner calling convention   Santosh Shilimkar
• [PATCH 25/25] ARM: pm: omap34xx: convert to generic suspend/resume support   Santosh Shilimkar
• [PATCH 06/10] omap2+: Remove gptimer_wakeup for now   Santosh Shilimkar
• [PATCH] OMAP3: PM: remove get_*_restore_pointer functions, directly use entry points   Santosh Shilimkar
• [PATCH 2/2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Santosh Shilimkar
• [PATCH 1/2] omap2+: pm: Use if...else instead of goto   Santosh Shilimkar
• [PATCH 1/2] omap2+: pm: Use if...else instead of goto   Santosh Shilimkar
• [PATCH 2/2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Santosh Shilimkar
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Santosh Shilimkar
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Santosh Shilimkar
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Santosh Shilimkar
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Santosh Shilimkar
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Santosh Shilimkar
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Santosh Shilimkar
• [PATCHv2] omap2+: pm: cpufreq: Fix loops_per_jiffy calculation   Santosh Shilimkar
• [PATCH] INPUT:Add ABS_PRESSURE input event support for touchscreen driver   Joonyoung Shim
• [PATCH 0/3] ARM: Add SDMMC support for S5P64X0   Rajeshwari Shinde
• [PATCH 1/3] ARM: S5P64X0: Add HSMMC setup for host Controller   Rajeshwari Shinde
• [PATCH 2/3] ARM: S5P64X0: Initialize default SDHCI devices and platform data   Rajeshwari Shinde
• [PATCH 3/3] ARM: S5P64X0: Enable SDHCI support   Rajeshwari Shinde
• [PATCH 1/3] Fix missing struct for s3c2410_dma_chan in s3c2410_dma_suspend_chan   Sergei Shtylyov
• [PATCH v6 1/8] MTD: Add integrator-flash feature to physmap   Sergei Shtylyov
• [PATCH v6 1/8] MTD: Add integrator-flash feature to physmap   Sergei Shtylyov
• [patch 12/14] i8253: Move remaining content and delete <asm/i8253.h>   Sergei Shtylyov
• [PATCH 2/3] davinci: dm6467/T EVM: pass reference clock rate to dm646x_init()   Sergei Shtylyov
• [PATCH 4/4] ARM: pmu: add platform_device_id table support   Sergei Shtylyov
• [Patch v2 03/11] ARM: hwcaps: use shifts instead of hardcoded constants   Sergei Shtylyov
• [PATCH] arm mach-s3c2440 mach-mini2440: New LCD-W35i support   Sergei Shtylyov
• [PATCH] arm mach-s3c2440 mach-mini2440: New LCD-W35i support   Sergei Shtylyov
• [RESEND PATCH 0/2] ARM IRQ Kconfig patches   Sergei Shtylyov
• [PATCH] arm mach-s3c2440 mach-mini2440: New LCD-W35i support   Sergei Shtylyov
• [PATCH][Trivial] S3C2410 bluetooth: Remove duplicate linux/leds.h include   Sergei Shtylyov
• [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.   Sergei Shtylyov
• [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.   Sergei Shtylyov
• [PATCH 7/7] ARM: EXYNOS4: Move S5P_CENTRAL_SEQ_CONFIGURATION setting for PM   Sergei Shtylyov
• [RFC 5/8] remoteproc: add davinci implementation   Sergei Shtylyov
• [RFC 5/8] remoteproc: add davinci implementation   Sergei Shtylyov
• [PATCH] NET: AX88796: Tighten up Kconfig dependencies   Sergei Shtylyov
• [RFC 6/8] davinci: da850: add remoteproc dsp device   Sergei Shtylyov
• not able to use the datacard USB modem with ARM9 baord   Baruch Siach
• [PATCH] ARM: mach-mx5/mx53_ard: Add support for i.MX53 ARD board   Andre Silva
• [PATCH v2] ARM: mach-mx5/mx53_ard: Add support for i.MX53 ARD board   Andre Silva
• [PATCH 2/2] ARM:mach-mx5/board-mx53_loco: Add CD and WP GPIOs   Andre Silva
• [PATCH 1/2] ARM:mach-mx5/board-mx51_babbage: Add CD and WP GPIOs   Andre Silva
• No subject   Andre Silva
• [PATCH 1/2] ARM:mach-mx5/mx53_ard: Add ESDHC support   Andre Silva
• [PATCH 2/2] ARM:mach-mx5/mx53_ard: Add Watchdog timer support   Andre Silva
• [PATCH 1/2] ARM:mx53: Add I2C3 support   Andre Silva
• [PATCH 2/2] ARM:mach-mx5/mx53_ard: Add I2C2 and I2C3 support   Andre Silva
• [PATCH] ARM: EXYNOS4: Suspend to RAM fix   Inderpal Singh
• [PATCH] ARM: EXYNOS4: Fix secondary CPU boot after wake-up   Inderpal Singh
• [PATCH] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Jaswinder Singh
• [PATCH] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Jaswinder Singh
• [PATCH] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Jaswinder Singh
• [PATCH] OMAP4: PANDA, SDP: Fix EHCI regulator supply   Jaswinder Singh
• [PATCH] omap: cleanup NAND platform data   Vimal Singh
• [PATCH] INPUT:Add ABS_PRESSURE input event support for touchscreen driver   Baohua Song
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Barry Song
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Barry Song
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Barry Song
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Barry Song
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Barry Song
• [RFC 1/2] ARM:Tegra: Device Tree Support: Initialize the audio card from the device tree.   Barry Song
• [PATCH 1/4] This patch adds ok2440 development board support.   Barry Song
• kernel - userspace shared memory   Barry Song
• [PATCH V2] ARM: Xilinx: Adding Xilinx board support   Barry Song
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v4] ARM: vfp: Always save VFP state in vfp_pm_suspend   Barry Song
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Vaidyanathan Srinivasan
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Vaidyanathan Srinivasan
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] s3c2410_udc: fix custom UDC command handling   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH] USB: ehci: use packed,aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Alan Stern
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Alan Stern
• [PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute   Alan Stern
• [PATCH 1/2] gpio-vbus: support disabling D+ pullup on suspend   Alan Stern
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Daniel Stone
• [PATCH 0/3] Fixes for breakage resulting from syscore_ops patch on s3c24xx   Heiko Stübner
• [PATCH 1/3] Fix missing struct for s3c2410_dma_chan in s3c2410_dma_suspend_chan   Heiko Stübner
• [PATCH 2/3] Move s3c24xx_irq_syscore_ops to plat-s3c24xx/irq.c   Heiko Stübner
• [PATCH 3/3] remove the now empty mach-s3c2410/irq.c   Heiko Stübner
• [PATCH] Fix compile failures by syscore_ops change on s3c2416   Heiko Stübner
• [PATCH 0/3] Fixes for breakage resulting from syscore_ops patch on s3c24xx   Heiko Stübner
• [PATCH v2 0/3] Fixes for breakage resulting from syscore_ops patch on s3c24xx   Heiko Stübner
• [PATCH v2 1/3] Fix missing struct for s3c2410_dma_chan in s3c2410_dma_suspend_chan   Heiko Stübner
• [PATCH v2 2/3] Move s3c24xx_irq_syscore_ops to plat-s3c24xx/irq.c   Heiko Stübner
• [PATCH v2 3/3] remove the now empty mach-s3c2410/irq.c   Heiko Stübner
• [PATCH 1/3] Fix missing struct for s3c2410_dma_chan in s3c2410_dma_suspend_chan   Heiko Stübner
• [PATCH v3 0/3] Fixes for breakage resulting from syscore_ops patch on s3c24xx   Heiko Stübner
• [PATCH v3 1/3] Fix missing struct for s3c2410_dma_chan in s3c2410_dma_suspend_chan   Heiko Stübner
• [PATCH v3 2/3] Move s3c24xx_irq_syscore_ops to plat-s3c24xx/irq.c   Heiko Stübner
• [PATCH v3 3/3] remove the now empty mach-s3c2410/irq.c   Heiko Stübner
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Heiko Stübner
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Heiko Stübner
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Heiko Stübner
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Heiko Stübner
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Heiko Stübner
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Heiko Stübner
• [PATCH v3] gpio: ep93xx: move driver to drivers/gpio   H Hartley Sweeten
• [PATCH] gpio: ep93xx: move driver to drivers/gpio   H Hartley Sweeten
• [PATCH] ep93xx: use gpio_led_register_device   H Hartley Sweeten
• [PATCH] gpio: ep93xx: move driver to drivers/gpio   H Hartley Sweeten
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   H Hartley Sweeten
• [PATCH] plat-mxc/pwm.c: use resource_size()   H Hartley Sweeten
• [PATCH] gpio-ep93xx: convert to platform_driver and use basic_mmio_gpio library   H Hartley Sweeten
• [PATCH] gpio-ep93xx: convert to platform_driver and use basic_mmio_gpio library   H Hartley Sweeten
• [PATCH] gpio-ep93xx: convert to platform_driver and use basic_mmio_gpio library   H Hartley Sweeten
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   H Hartley Sweeten
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   H Hartley Sweeten
• [PATCH v2 2/5] net: ep93xx_eth: pass struct device to DMA API functions   H Hartley Sweeten
• [PATCH v2 3/5] net: ep93xx_eth: allocate buffers using kmalloc()   H Hartley Sweeten
• [PATCH v2 4/5] net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()   H Hartley Sweeten
• [PATCH v2 5/5] net: ep93xx_eth: fix DMA API violations   H Hartley Sweeten
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   H Hartley Sweeten
• [PATCH v2 2/5] net: ep93xx_eth: pass struct device to DMA API functions   H Hartley Sweeten
• [PATCH 1/2] gpio: expose gpio_to_chip()   H Hartley Sweeten
• [PATCH v2 2/5] net: ep93xx_eth: pass struct device to DMA API functions   H Hartley Sweeten
• [PATCH] ARM: bug.h: fix sparse error: symbol '__bug' redeclared   H Hartley Sweeten
• [PATCH] fb.h: ARM uses __raw_{read/write}   H Hartley Sweeten
• [PATCH v2 4/5] ARM: ep93xx: fix inverted RTS/DTR signals on uart1   H Hartley Sweeten
• [PATCH v2 1/5] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   H Hartley Sweeten
• [PATCH v2 2/5] ARM: ep93xx: add model detection for ts-7300 and ts-7400 boards   H Hartley Sweeten
• [PATCH v2 3/5] ARM: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM   H Hartley Sweeten
• [PATCH v2 5/5] ARM: ep93xx: ts72xx: fix board model detection   H Hartley Sweeten
• [PATCH] locomo: drop special locomo_{read/write}l in favor of io{read/write}16   H Hartley Sweeten
• [PATCH] locomo: use resource_size instead of PAGE_SIZE for ioremap   H Hartley Sweeten
• [PATCH] ARM: quiet sparse noise due to __ARCH_WANT_SYS_RT_SIG(ACTION|SUSPEND)   H Hartley Sweeten
• [PATCH] ARM: quiet sparse noise due to __ARCH_WANT_SYS_RT_SIG(ACTION|SUSPEND)   H Hartley Sweeten
• [PATCH] ARM: quiet sparse noise due to __ARCH_WANT_SYS_RT_SIG(ACTION|SUSPEND)   H Hartley Sweeten
• [PATCH 1/3] PWM: add pwm framework support   H Hartley Sweeten
• [RFC 0/8] Introducing a generic AMP/IPC framework   Brian Swetland
• [RFC 0/8] Introducing a generic AMP/IPC framework   Brian Swetland
• [PATCH] s3c2410_udc: fix custom UDC command handling   Skacore Systems
• [PATCH] s3c2410_udc: fix custom UDC command handling   Skacore Systems
• [PATCH] s3c2410_udc: fix custom UDC command handling   Skacore Systems
• [PATCH] s3c2410_udc: fix custom UDC command handling   Skacore Systems
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Marek Szyprowski
• [PATCH] ARM: SAMSUNG: Add support for pre-sleep/post-restore gpio control   Marek Szyprowski
• [PATCH] ARM: fix ioremap to allow mapping some specific RAM areas   Marek Szyprowski
• [PATCH] ARM: fix ioremap to allow mapping some specific RAM areas   Marek Szyprowski
• [PATCH] ARM: fix ioremap to allow mapping some specific RAM areas   Marek Szyprowski
• [PATCH] ARM: S5PV210: Fix build breakage due to renaming of S3C_VA_USB_HSPHY   Marek Szyprowski
• [PATCH] ARM: SAMSUNG: Add support for pre-sleep/post-restore gpio control   Marek Szyprowski
• [PATCHv10 0/10] Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 01/10] lib: bitmap: Added alignment offset for bitmap_find_next_zero_area()   Marek Szyprowski
• [PATCH 02/10] lib: genalloc: Generic allocator improvements   Marek Szyprowski
• [PATCH 03/10] mm: move some functions from memory_hotplug.c to page_isolation.c   Marek Szyprowski
• [PATCH 04/10] mm: alloc_contig_freed_pages() added   Marek Szyprowski
• [PATCH 05/10] mm: alloc_contig_range() added   Marek Szyprowski
• [PATCH 06/10] mm: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCH 07/10] mm: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Marek Szyprowski
• [PATCH 09/10] ARM: integrate CMA with dma-mapping subsystem   Marek Szyprowski
• [PATCH 10/10] ARM: S5PV210: add CMA support for FIMC devices on Aquila board   Marek Szyprowski
• [PATCH 02/10] lib: genalloc: Generic allocator improvements   Marek Szyprowski
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Marek Szyprowski
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Marek Szyprowski
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Marek Szyprowski
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Marek Szyprowski
• [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Marek Szyprowski
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Marek Szyprowski
• [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [PATCH 1/8] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Marek Szyprowski
• [PATCH 2/8] ARM: dma-mapping: implement dma_map_single on top of dma_map_page   Marek Szyprowski
• [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Marek Szyprowski
• [PATCH 4/8] ARM: dma-mapping: implement dma sg methods on top of generic dma ops   Marek Szyprowski
• [PATCH 5/8] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Marek Szyprowski
• [PATCH 6/8] ARM: dma-mapping: remove redundant code and cleanup   Marek Szyprowski
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH 8/8] ARM: dma-mapping: use alloc, mmap, free from dma_ops   Marek Szyprowski
• [PATCH 1/8] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Marek Szyprowski
• [RFC 0/2] ARM: DMA-mapping & IOMMU integration   Marek Szyprowski
• [PATCH 2/8] ARM: dma-mapping: implement dma_map_single on top of dma_map_page   Marek Szyprowski
• [PATCH 4/8] ARM: dma-mapping: implement dma sg methods on top of generic dma ops   Marek Szyprowski
• [PATCH 5/8] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Marek Szyprowski
• [RFC][PATCH 0/5] USB: DWC OTG: Add dwc_otg driver for S5P6440 samsung SoC.   Marek Szyprowski
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [Linaro-mm-sig] [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Marek Szyprowski
• [RFC][PATCH 0/5] USB: DWC OTG: Add dwc_otg driver for S5P6440 samsung SoC.   Marek Szyprowski
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [Linaro-mm-sig] [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Marek Szyprowski
• [Linaro-mm-sig] [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH/RFC 0/8] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Marek Szyprowski
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH 5/8] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Marek Szyprowski
• [PATCH 2/8] ARM: dma-mapping: implement dma_map_single on top of dma_map_page   Marek Szyprowski
• [PATCH 7/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH 2/8] ARM: dma-mapping: implement dma_map_single on top of dma_map_page   Marek Szyprowski
• [PATCH 0/7] ARM: SAMSUNG: Cleanup SPI platform specific code   Marek Szyprowski
• [PATCH 1/2] ARM: OMAP4: MMC: increase delay for pbias   T Krishnamoorthy, Balaji
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Petr Tesarik
• [PATCH 07/10] arm: change valid_phys_addr_range's @addr param to phys_addr_t   Petr Tesarik
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Petr Tesarik
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Petr Tesarik
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Petr Tesarik
• [RFC] Add Arm cpu topology definition   Samuel Thibault
• [RFC] Add Arm cpu topology definition   Samuel Thibault
• [PATCH REPOST] ARM: Thumb-2: Relax relocation requirements for non-function symbols   Tixy
• [RFC] kprobes with thumb2 conditional code   Tixy
• [RFC] kprobes with thumb2 conditional code   Tixy
• [PATCH 1/3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH 1/3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH 1/3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH v3] dmaengine: add new dma API for max_segment_number   FUJITA Tomonori
• [PATCH v3 RESEND] dma-mapping: add new API for max_segment_number   FUJITA Tomonori
• [PATCH] locomo: drop special locomo_{read/write}l in favor of io{read/write}16   Dmitry Torokhov
• [RFC 1/2] omap: mcbsp: Drop SPI mode support   Péter Ujfalusi
• [PATCH 2/3] net/fec: add device tree support   Greg Ungerer
• [PATCH 2/3] net/fec: add device tree support   Greg Ungerer
• [PATCH 3/3 v2] ARM: pxa168: Add board support for gplugD   Tanmay Upadhyay
• ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a map_info   Geert Uytterhoeven
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Geert Uytterhoeven
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Geert Uytterhoeven
• [PATCH] OMAP: 4430SDP: Register the card detect GPIO properly   Silesh C V
• [PATCH] OMAP: HSMMC: Fix GPIO muxing   Silesh C V
• [PATCH] OMAP: HSMMC: Fix GPIO muxing   Silesh C V
• [PATCH v2 1/2] OMAP: 4430SDP: Register the card detect GPIO properly   Silesh C V
• [PATCH v2 2/2] OMAP: HSMMC: Fix GPIO muxing   Silesh C V
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Srivatsa Vaddagiri
• [PATCH 1/2] config: omap2+: force fb and dss support as built-in   Tomi Valkeinen
• [PATCH 2/2] video: omap2: Compile omap2 support only when needed   Tomi Valkeinen
• [PATCH 2/2] video: omap2: Compile omap2 support only when needed   Tomi Valkeinen
• [PATCH 15/15] OMAP: GPIO: clean omap_gpio_mod_init function   Varadarajan, Charulatha
• [PATCH 1/3] pxa2xx vpac: pcmcia - free gpios on exist rather than requesting them again.   Marek Vasut
• [PATCH 2/3] pxa2xx trizeps4: pcmcia remove unnecessary ifdefs   Marek Vasut
• kernel panic in spi_complete() on spitz (PXA270)   Marek Vasut
• [PATCH] MAX1111: Fix race condition causing NULL pointer exception   Marek Vasut
• kernel panic in spi_complete() on spitz (PXA270)   Marek Vasut
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Arjan van de Ven
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Arjan van de Ven
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Arjan van de Ven
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Arjan van de Ven
• [PATCH 0/7] ARM: SAMSUNG: Cleanup SPI platform specific code   Padmavathi Venna
• [PATCH 1/7] ARM: SAMSUNG: Move SPI device definitions to plat-samsung   Padmavathi Venna
• [PATCH 2/7] ARM: SAMSUNG: Define common macro for SPI physical address   Padmavathi Venna
• [PATCH 3/7] ARM: SAMSUNG: Add SPI clock definitions for SAMSUNG SoCs   Padmavathi Venna
• [PATCH 4/7] ARM: SAMSUNG: Create SPI device setup files in respective machine folder   Padmavathi Venna
• [PATCH 5/7] ARM: SAMSUNG: Add SPI platform specific code   Padmavathi Venna
• [PATCH 6/7] SPI: S5PC100: Enable the SPI driver for S5PC100   Padmavathi Venna
• [PATCH 7/7] SPI: S5PV210: Enable the SPI driver for S5PV210   Padmavathi Venna
• [PATCH 1/2] ARM: SAMSUNG: Added tx_st_done variable in the platform data of SPI   Padmavathi Venna
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Padmavathi Venna
• [PATCH] ARM: EXYNOS4: Add SPI support   Padmavathi Venna
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Hans Verkuil
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Daniel Vetter
• [RFC] Consolidation: Replace all led drivers in arch/arm to leds trigger drivers   Andrew Victor
• MMC and reliable write - was: since when does ARM map the kernel memory in sections?   Peter Waechtler
• [PATCH] msm: timer: compensate for timer shift in msm_read_timer_count   Daniel Walker
• [PATCH] ARM: kirkwood: Add support for Buffalo LS-XHL   Michael Walle
• [PATCH] ARM: kirkwood: Add support for Buffalo LS-XHL   Michael Walle
• [PATCH v2] ARM: kirkwood: Add support for Buffalo LS-XHL   Michael Walle
• [PATCH v2] ARM: kirkwood: Add support for Buffalo LS-XHL   Michael Walle
• [PATCH 0/2 RFC] arm/kirkwood: add dreamplug support.   Michael Walle
• [PATCH 1/2] sdio: add function to enable and disable sdio_single_irq optimization   Linus Walleij
• [PATCH 3/3] mach-u300: cleanup clockevent code   Linus Walleij
• [RFC] Consolidation: Replace all led drivers in arch/arm to leds trigger drivers   Linus Walleij
• [PATCH 2/3] clocksource: add DB8500 PRCMU Timer support   Linus Walleij
• [PATCH] clockevents: make register functions work on UP   Linus Walleij
• [PATCH 3/3] mach-u300: cleanup clockevent code   Linus Walleij
• [PATCH] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Linus Walleij
• [PATCH 3/3] mach-u300: cleanup clockevent code   Linus Walleij
• [PATCH] mach-ux500: register a clock for the SMP TWD   Linus Walleij
• [PATCH 2/3] clocksource: add DB8500 PRCMU Timer support   Linus Walleij
• [GIT PULL] scalable TWD localtimer   Linus Walleij
• [PATCH] mach-u300: fix compilaton warning in IO accessors   Linus Walleij
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   Linus Walleij
• [PATCH] gpio/nomadik: fix sleepmode for elder Nomadik   Linus Walleij
• [PATCH 1/2] amba pl011: workaround for uart registers lockup   Linus Walleij
• [PATCH 2/2] amba pl011: platform data for reg lockup and glitch   Linus Walleij
• [PATCH 0/2] RFC: gpio: driver-local pin configuration   Linus Walleij
• [PATCH 1/2] gpio: expose gpio_to_chip()   Linus Walleij
• [PATCH 2/2] gpio/u300: rewrite gpio driver   Linus Walleij
• [PATCH 1/2] amba pl011: workaround for uart registers lockup   Linus Walleij
• [PATCH 2/2] amba pl011: platform data for reg lockup and glitch v2   Linus Walleij
• [PATCH] mach-ux500: iomap PRCMU TCDM memory   Linus Walleij
• [PATCH] gpio/plat-pxa: fix clash with gpiolib namespace   Linus Walleij
• [PATCH 1/2] gpio: expose gpio_to_chip()   Linus Walleij
• [PATCH] gpio/74x164: fix clash with gpiolib namespace   Linus Walleij
• [RFC] dmaengine: add new api for preparing simple slave transfer   Linus Walleij
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Linus Walleij
• [PATCH 2/2] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Linus Walleij
• [RFC] dmaengine: add new api for preparing simple slave transfer   Linus Walleij
• [PATCH] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Linus Walleij
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Linus Walleij
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Linus Walleij
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Linus Walleij
• [PATCH] mach-ixp4xx: fix build error   Linus Walleij
• [PATCH] mach-h720x: fix build error   Linus Walleij
• [PATCH] mach-ixp4xx: fix build error   Linus Walleij
• [PATCH] mach-h720x: fix build error   Linus Walleij
• [PATCH 1/2] amba pl011: workaround for uart registers lockup   Linus Walleij
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Linus Walleij
• More pinmux feedback, and GPIO vs. pinmux interaction   Linus Walleij
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Linus Walleij
• [PATCH] plat-iop: fix build error   Linus Walleij
• [PATCH] plat-iop: fix build error   Linus Walleij
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Linus Walleij
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Linus Walleij
• [PATCH] clocksource/arm_smp_twd: handle frequency changes   Linus Walleij
• [PATCH] clocksource/arm_smp_twd: handle frequency changes   Linus Walleij
• [PATCH 0/3] Improve MMC error handling (3rd rev)   Linus Walleij
• [GIT PULL] U300 and Ux500 patches for the arm-soc tree   Linus Walleij
• [PATCH] mach-x500: fix SECTION warnings in uib   Linus Walleij
• [PATCH 0/6] mach-ux500: Snowball support   Linus Walleij
• [PATCH 1/6] mach-ux500: add basic support for snowball board   Linus Walleij
• [PATCH 2/6] mach-ux500: setting proper uart for snowball   Linus Walleij
• [PATCH 3/6] mach-ux500: Add SDI support for snowball board   Linus Walleij
• [PATCH 4/6] mach-ux500: Add pin configuration for snowball board   Linus Walleij
• [PATCH 5/6] mach-ux500: Kconfig for snowball board   Linus Walleij
• [PATCH 6/6] mach-ux500: add configs for snowball board   Linus Walleij
• [PATCH 0/3] consolidate ARM refdesign LEDs   Linus Walleij
• [PATCH 1/3] leds: create a trigger for ARM CPU activity   Linus Walleij
• [PATCH 2/3] mach-realview: retire custom LED code   Linus Walleij
• [PATCH 3/3] mach-versatile: retire custom LED code   Linus Walleij
• [PATCH] ARM: remove legacy LEDS support from RealView and Versatile   Linus Walleij
• [PATCH 1/3] leds: create a trigger for ARM CPU activity   Linus Walleij
• [PATCH 0/2] RFC: gpio: driver-local pin configuration   Linus Walleij
• [GIT PULL] U300 and Ux500 patches for the arm-soc tree   Linus Walleij
• [PATCH 0/4] Nomadik GPIO patches for 3.1, round 1   Linus Walleij
• [PATCH 1/4] gpio/nomadik: move the Nomadik GPIO header   Linus Walleij
• [PATCH 2/4] gpio/nomadik: remove pull-pinconfig and add SPI2   Linus Walleij
• [PATCH 3/4] gpio/nomadik: disable clocks when unused   Linus Walleij
• [PATCH 4/4] gpio/nomadik: use genirq core to track enablement   Linus Walleij
• [PATCH 1/3] leds: create a trigger for ARM CPU activity   Linus Walleij
• [PATCH 0/4] Introduce a led trigger for CPU activity   Linus Walleij
• [PATCH 2/4] ARM: use new LEDS CPU trigger stub to replace old one   Linus Walleij
• [PATCH 3/4] mach-realview: retire custom LED code   Linus Walleij
• [PATCH 0/2] RFC: gpio: driver-local pin configuration   Linus Walleij
• [PATCH 0/2] RFC: gpio: driver-local pin configuration   Linus Walleij
• More pinmux feedback, and GPIO vs. pinmux interaction   Linus Walleij
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Linus Walleij
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Linus Walleij
• [PATCH] mach-ux500: fix USB build error   Linus Walleij
• [PATCH 0/4] MMCI patches for 3.1   Linus Walleij
• [PATCH 1/4] mmci: use StartBitErr to detect bad connections   Linus Walleij
• [PATCH 2/4] mmci: adjust calculation of f_min   Linus Walleij
• [PATCH 3/4] mmci: sync DATAEND irq with dma|pio transfer done   Linus Walleij
• [PATCH 4/4] mmci: fixup sg buffer handling in pio_write   Linus Walleij
• [PATCH 0/2] RFC: gpio: driver-local pin configuration   Linus Walleij
• [PATCHv2 0/4] ARM: pmu: improve PMU type identification   Linus Walleij
• [PATCH] mach-ux500: fix build error due to unknown 'regulator_en' field   Linus Walleij
• [PATCH] ARM TCM sample code   Linus Walleij
• [PATCH 1/3] ARM: enhance TCM robustness   Linus Walleij
• [PATCH 2/3] ARM: export functions to determine the presence of I/DTCM   Linus Walleij
• [PATCH 3/3] mach-realview: add TCM support for PB1176   Linus Walleij
• [PATCH 2/3] clocksource: add DB8500 PRCMU Timer support   Mattias Wallin
• [PATCH 2/3] clocksource: add DB8500 PRCMU Timer support   Mattias Wallin
• [PATCH 2/3] clocksource: add DB8500 PRCMU Timer support   Mattias Wallin
• [PATCH 2/3] clocksource: add DB8500 PRCMU Timer support   Mattias Wallin
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Mattias Wallin
• [PATCHv2 1/3] plat-nomadik: MTU sched_clock as a config option   Mattias Wallin
• [PATCHv2 2/3] clocksource: add DB8500 PRCMU Timer support   Mattias Wallin
• [PATCHv2 3/3] mach-ux500: Initialize the DB8500 PRCMU timer   Mattias Wallin
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Mattias Wallin
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Mattias Wallin
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Mattias Wallin
• [PATCH] mach-ux500: iomap PRCMU TCDM memory   Mattias Wallin
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Mattias Wallin
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Mattias Wallin
• [PATCH 9/10] arch/arm/mach-omap2/clock.c: add missing clk_put   Paul Walmsley
• [PATCH] OMAP: PM: omap_device: fix device power domain callbacks   Paul Walmsley
• [PATCH 5/8] OMAP4: PM: TEMP: Prevent l3init from idling/force sleep   Paul Walmsley
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Paul Walmsley
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Paul Walmsley
• [PATCH 4/8] OMAP2+: PM: idle clkdms only if already in idle   Paul Walmsley
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Paul Walmsley
• [PATCH] omap3: beagle: Use GPTIMERi 1 for clockevents   Paul Walmsley
• [PATCH 2/3] MMC: OMAP: HSMMC: add runtime pm support   Paul Walmsley
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Américo Wang
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Andrei Warkentin
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Andrei Warkentin
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Andrei Warkentin
• irq flood with mmc boot partitions on s3c2416 with 3.0rc1   Andrei Warkentin
• [RFC 2/2] ARM:Tegra: Device Tree Support: Initialize audio card gpio's from the device tree.   Stephen Warren
• [RFC 2/2] ARM:Tegra: Device Tree Support: Initialize audio card gpio's from the device tree.   Stephen Warren
• [PATCH] ARM: tegra/harmony: enable USB host ports   Stephen Warren
• [PATCH] ARM: tegra/harmony: enable USB host ports   Stephen Warren
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Stephen Warren
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Stephen Warren
• More pinmux feedback, and GPIO vs. pinmux interaction   Stephen Warren
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Stephen Warren
• More pinmux feedback, and GPIO vs. pinmux interaction   Stephen Warren
• [RFC PATCH 06/16] ARM: local timers: move Tegra to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Stephen Warren
• RFC: drivers: swarren's pinmux API concept   Stephen Warren
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Stephen Warren
• [PATCH] collie: don't read GPSR   Lothar Waßmann
• [PATCH 1/1] MXC: iomux-v3: correct NO_PAD_CTRL definition   Lothar Waßmann
• [PATCH 2/2] pwm: Add a i.MX23/28 pwm driver   Lothar Waßmann
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Lothar Waßmann
• [PATCH] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Lei Wen
• [PATCH] MTD: pxa3xx_nand: fix nand detection issue   Lei Wen
• [PATCH] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Lei Wen
• [PATCH 1/2] MTD: pxa3xx_nand: fix nand detection issue   Lei Wen
• [PATCH 2/2] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Lei Wen
• [PATCH 1/2] MTD: pxa3xx_nand: fix nand detection issue   Lei Wen
• [PATCH 2/2] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Lei Wen
• [PATCH 1/2] ARM: pxa910: correct nand pmu setting   Lei Wen
• [PATCH 2/2] ARM: pxa168: correct nand pmu setting   Lei Wen
• [PATCH 2/2] ARM: pxa168: correct nand pmu setting   Lei Wen
• [PATCH 2/2] ARM: pxa168: correct nand pmu setting   Lei Wen
• [PATCH 2/2] ARM: pxa168: correct nand pmu setting   Lei Wen
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH V3 0/9] pxa3xx_nand: add two chip select support   Lei Wen
• [PATCH 1/9] MTD: pxa3xx_nand: convert all printk into dev_*   Lei Wen
• [PATCH 2/9] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH 3/9] ARM: aspenite: fix nand platform data   Lei Wen
• [PATCH 4/9] ARM: cm-x300: fix nand platform data   Lei Wen
• [PATCH 5/9] ARM: colibri-pxa3xx: fix nand platform data   Lei Wen
• [PATCH 6/9] ARM: littleton: fix nand platform data   Lei Wen
• [PATCH 7/9] ARM: mxm8x10: fix nand platform data   Lei Wen
• [PATCH 8/9] ARM: raumfeld: fix nand platform data   Lei Wen
• [PATCH 9/9] ARM: zylonite: fix nand platform data   Lei Wen
• [PATCH 2/9] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH 1/5] net: ep93xx_eth: pass struct device to DMA API functions   Mika Westerberg
• [PATCH 2/5] net: ep93xx_eth: allocate buffers using kmalloc()   Mika Westerberg
• [PATCH 3/5] net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()   Mika Westerberg
• [PATCH 4/5] net: ep93xx_eth: fix DMA API violations   Mika Westerberg
• [PATCH 5/5] ep93xx: set DMA masks for the ep93xx_eth   Mika Westerberg
• [PATCH v3] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Mika Westerberg
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Mika Westerberg
• [PATCH v2 2/5] net: ep93xx_eth: pass struct device to DMA API functions   Mika Westerberg
• [PATCH v2 3/5] net: ep93xx_eth: allocate buffers using kmalloc()   Mika Westerberg
• [PATCH v2 4/5] net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()   Mika Westerberg
• [PATCH v2 5/5] net: ep93xx_eth: fix DMA API violations   Mika Westerberg
• [PATCH v2 0/5] ep93xx DMA patches   Mika Westerberg
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Mika Westerberg
• [PATCH v4] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Mika Westerberg
• [PATCH v4] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Mika Westerberg
• [PATCH v2 0/5] ep93xx DMA patches   Mika Westerberg
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Mika Westerberg
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Mika Westerberg
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Mika Westerberg
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Mika Westerberg
• [PATCH v2 5/5] spi/ep93xx: add DMA support   Mika Westerberg
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Mika Westerberg
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Mika Westerberg
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Mika Westerberg
• [PATCH v2 2/5] net: ep93xx_eth: pass struct device to DMA API functions   Mika Westerberg
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Mika Westerberg
• [PATCH v3 1/5] ep93xx: set DMA masks for the ep93xx_eth   Mika Westerberg
• [PATCH v3 2/5] net: ep93xx_eth: pass struct device to DMA API functions   Mika Westerberg
• [PATCH v3 3/5] net: ep93xx_eth: allocate buffers using kmalloc()   Mika Westerberg
• [PATCH v3 4/5] net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()   Mika Westerberg
• [PATCH v3 5/5] net: ep93xx_eth: fix DMA API violations   Mika Westerberg
• [PATCH] ep93xx-eth: convert to phylib   Mika Westerberg
• [PATCH 0/4] drivers/iommu/ relocations   Matthew Wilcox
• [PATCH v3 RESEND] dma-mapping: add new API for max_segment_number   Matthew Wilcox
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Matthew Wilcox
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Matthew Wilcox
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Dan Williams
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Dan Williams
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Dan Williams
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Dan Williams
• [PATCH v2 1/3] dmaengine: add new dma API for max_segment_number   Dan Williams
• [RFC 0/8] Introducing a generic AMP/IPC framework   Michael Williamson
• [PATCH 4/4] x86: intel-iommu: move to drivers/iommu/   David Woodhouse
• [PATCH] omap3evm: Add Mistral WL12XX config support   Vitaly Wool
• [PATCH 4/4] x86: intel-iommu: move to drivers/iommu/   Chris Wright
• [RFC] Consolidation: Replace all led drivers in arch/arm to leds trigger drivers   Bryan Wu
• [PATCH] arm: ks8695: remove leds driver, since nobody use it   Bryan Wu
• [RFC] Consolidation: Replace all led drivers in arch/arm to leds trigger drivers   Bryan Wu
• [PATCH] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers   Bryan Wu
• [PATCH 0/6] footbridge consolidation patches   Bryan Wu
• [PATCH 1/6] arm: footbridge: consolidation code of CATS machine   Bryan Wu
• [PATCH 2/6] arm: footbridge: consolidation code of EBSA285 machine   Bryan Wu
• [PATCH 3/6] arm: footbridge: consolidation code of Netwinder machine   Bryan Wu
• [PATCH 4/6] arm: footbridge: consolidation code of Compaq Personal Server   Bryan Wu
• [PATCH 5/6] arm: footbridge: convert old leds event driver to led gpio trigger driver of Netwinder   Bryan Wu
• [PATCH 6/6] arm: footbridge: convert old leds event driver to led trigger drivers of EBSA285   Bryan Wu
• [PATCH 0/6] footbridge consolidation patches   Bryan Wu
• [PATCH 5/6] arm: footbridge: convert old leds event driver to led gpio trigger driver of Netwinder   Bryan Wu
• [PATCH 1/3] leds: create a trigger for ARM CPU activity   Bryan Wu
• [PATCH 0/4] Introduce a led trigger for CPU activity   Bryan Wu
• [PATCH 1/4] leds: create a trigger for CPU activity   Bryan Wu
• [PATCH 2/4] ARM: use new LEDS CPU trigger stub to replace old one   Bryan Wu
• [PATCH 3/4] mach-realview: retire custom LED code   Bryan Wu
• [PATCH 4/4] mach-versatile: retire custom LED code   Bryan Wu
• [PATCH 0/4] Introduce a led trigger for CPU activity   Bryan Wu
• [PATCH 2/4] ARM: use new LEDS CPU trigger stub to replace old one   Bryan Wu
• [PATCH 0/3] Add generic idle notifiers   Bryan Wu
• [PATCH] ARM: automatically select OMAP3_PMU if we try to use perf on OMAP3   Bryan Wu
• [PATCH] ARM: automatically select OMAP3_PMU if we try to use perf on OMAP3   Bryan Wu
• [PATCH v2] [media] at91: add Atmel Image Sensor Interface (ISI) support   Wu, Josh
• [PATCH v2] [media] at91: add Atmel Image Sensor Interface (ISI) support   Wu, Josh
• [PATCH v2] [media] at91: add Atmel Image Sensor Interface (ISI) support   Wu, Josh
• [PATCH v3] [media] at91: add Atmel Image Sensor Interface (ISI) support   Josh Wu
• [PATCH v3] [media] at91: add Atmel Image Sensor Interface (ISI) support   Wu, Josh
• [PATCH v4] [media] at91: add Atmel Image Sensor Interface (ISI) support   Josh Wu
• [linux-pm] [RFC PATCH v4] ARM hibernation/suspend-to-disk support   Rafael J. Wysocki
• [PATCH 0/3] CPU PM notifiers   Rafael J. Wysocki
• [PATCH 0/3] CPU PM notifiers   Rafael J. Wysocki
• [PATCH 0/3] CPU PM notifiers   Rafael J. Wysocki
• [PATCH 0/3] CPU PM notifiers   Rafael J. Wysocki
• [PATCH 0/3] CPU PM notifiers   Rafael J. Wysocki
• [PATCH 1/2] MMC: PM: add suspend/resume in atmel-mci   Rafael J. Wysocki
• [PATCH] Fix build warning of the defconfigs   Guan Xuetao
• [RFC,PATCH] Cleanup PC parallel port Kconfig   Guan Xuetao
• [PATCH]OMAP2: remove unneeded comment   Yegor Yefremov
• Trouble with newer kernels on Gumstix Overo boards   Yegor Yefremov
• Trouble with newer kernels on Gumstix Overo boards   Yegor Yefremov
• [PATCH 0/7] ARM: EXYNOS4: Adds External GIC   Changhwan Youn
• [PATCH 1/7] ARM: EXYNOS4: Add external GIC io memory mapping   Changhwan Youn
• [PATCH 2/7] ARM: EXYNOS4: modify interrupt mappings for external GIC   Changhwan Youn
• [PATCH 3/7] ARM: EXYNOS4: set the affinity of mct1 interrupt using IRQ_MCT_L1   Changhwan Youn
• [PATCH 4/7] ARM: GIC: move gic_chip_data structure declaration to header   Changhwan Youn
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Changhwan Youn
• [PATCH 6/7] ARM: EXYNOS4: Remove clock event timers using ARM private timers   Changhwan Youn
• [PATCH 7/7] ARM: EXYNOS4: Add chained enrty/exit function to uart interrupt handler   Changhwan Youn
• [PATCH v2 3/3] ARM: EXYNOS4: Add EPLL clock operations   Seungwhan Youn
• [PATCH v2 3/3] ARM: EXYNOS4: Add EPLL clock operations   Seungwhan Youn
• A page fault causes exiting from WFI mode for all idling cores?   heechul Yun
• OMPA4: 3.0-rc1: Unhandled fault during insmod 'ohci-hcd.ko'   Dima Zavin
• how to suspend on arm smp platform   JiSheng Zhang
• [PATCH 07/37] Remove unneeded version.h includes from arch/arm/   JD (Jiandong) Zheng
• [PATCH 07/37] Remove unneeded version.h includes from arch/arm/   Jiandong Zheng
• Problem with GDB when debugging IRQ handlers   Hui Zhu
• Problem with GDB when debugging IRQ handlers   Hui Zhu
• [RFC] mmc: Enable the ADMA on esdhc imx driver   Richard Zhu
• [PATCH V1] mmc: Enable the ADMA on esdhc imx driver   Richard Zhu
• [PATCH V1] mmc: Enable the ADMA on esdhc imx driver   Richard Zhu
• [PATCH V2] mmc: Enable the ADMA on esdhc imx driver   Richard Zhu
• [V3 PATCH] mmc: Enable the ADMA on esdhc imx driver   Richard Zhu
• [PATCH,RFC] mmp clockevent handling race   Haojian Zhuang
• [PATCH,RFC] mmp clockevent handling race   Haojian Zhuang
• [PATCH,RFC] mmp clockevent handling race   Haojian Zhuang
• [PATCH,RFC] mmp clockevent handling race   Haojian Zhuang
• [PATCH v6 1/8] MTD: Add integrator-flash feature to physmap   Marc Zyngier
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Marc Zyngier
• [PATCH] ARM: exynos4: fix secondary CPU boot   Marc Zyngier
• [PATCH] ARM: exynos4: fix secondary CPU boot   Marc Zyngier
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Marc Zyngier
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Marc Zyngier
• [PATCH] ARM: local timers: Allow boot CPU to have its timer running early   Marc Zyngier
• [PATCH v6 00/14] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [PATCH v6 01/14] ARM: gic: add per-cpu interrupt multiplexer   Marc Zyngier
• [PATCH v6 02/14] ARM: smp: add interrupt handler for local timers   Marc Zyngier
• [PATCH v6 03/14] ARM: smp_twd: add support for remapped PPI interrupts   Marc Zyngier
• [PATCH v6 04/14] ARM: omap4: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v6 05/14] ARM: versatile: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v6 06/14] ARM: shmobile: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v6 07/14] ARM: ux500: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v6 08/14] ARM: tegra: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v6 09/14] ARM: msm: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v6 10/14] ARM: exynos4: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v6 11/14] ARM: gic: remove previous local timer interrupt handling   Marc Zyngier
• [PATCH v6 12/14] ARM: gic: add compute_irqnr macro for exynos4   Marc Zyngier
• [PATCH v6 13/14] ARM: SMP: automatically select ARM_GIC_VPPI   Marc Zyngier
• [PATCH v6 14/14] ARM: exynos4: switch MCT to the full local timer infrastructure   Marc Zyngier
• [PATCH v1 00/18] Allow local timers to be registered at runtime   Marc Zyngier
• [PATCH v1 01/18] ARM: Move local timer support out of smp.c   Marc Zyngier
• [PATCH v1 02/18] ARM: local timers: Add runtime registration interface   Marc Zyngier
• [PATCH v1 03/18] ARM: omap2: remove stubbed twd_timer_setup call   Marc Zyngier
• [PATCH v1 04/18] ARM: exynos4: remove stubbed twd_timer_setup call   Marc Zyngier
• [PATCH v1 05/18] ARM: shmobile: remove stubbed twd_timer_setup call   Marc Zyngier
• [PATCH v1 06/18] ARM: tegra: remove stubbed twd_timer_setup call   Marc Zyngier
• [PATCH v1 07/18] ARM: ux500: remove stubbed twd_timer_setup call   Marc Zyngier
• [PATCH v1 08/18] ARM: versatile: remove stubbed twd_timer_setup call   Marc Zyngier
• [PATCH v1 09/18] ARM: remove unused twd_timer_setup stub   Marc Zyngier
• [PATCH v1 10/18] ARM: versatile/vexpress: dynamically register local timer setup function   Marc Zyngier
• [PATCH v1 11/18] ARM: msm: dynamically register local timer   Marc Zyngier
• [PATCH v1 12/18] ARM: omap4: dynamically register local timer setup function   Marc Zyngier
• [PATCH v1 13/18] ARM: exynos4: dynamically register local timer setup function   Marc Zyngier
• [PATCH v1 14/18] ARM: shmobile: dynamically register local timer setup function   Marc Zyngier
• [PATCH v1 15/18] ARM: tegra: dynamically register local timer setup function   Marc Zyngier
• [PATCH v1 16/18] ARM: ux500: dynamically register local timer setup function   Marc Zyngier
• [PATCH v1 17/18] ARM: simplify percpu_timer_setup   Marc Zyngier
• [PATCH v1 18/18] ARM: simplify percpu_timer_ack   Marc Zyngier
• [PATCH 1/2] pxa2xx viper: pcmcia - free gpios on exist rather than requesting them again.   Marc Zyngier
• [PATCH] ARM: tegra/harmony: enable USB host ports   Marc Zyngier
• [PATCH] ARM: tegra/harmony: enable USB host ports   Marc Zyngier
• ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a map_info   Marc Zyngier
• [PATCH v7 00/14] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [PATCH v7 01/14] ARM: gic: add per-cpu interrupt multiplexer   Marc Zyngier
• [PATCH v7 02/14] ARM: smp: add interrupt handler for local timers   Marc Zyngier
• [PATCH v7 03/14] ARM: smp_twd: add support for remapped PPI interrupts   Marc Zyngier
• [PATCH v7 04/14] ARM: omap4: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v7 05/14] ARM: versatile: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v7 06/14] ARM: shmobile: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v7 07/14] ARM: ux500: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v7 08/14] ARM: tegra: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v7 09/14] ARM: msm: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v7 10/14] ARM: exynos4: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v7 11/14] ARM: gic: remove previous local timer interrupt handling   Marc Zyngier
• [PATCH v7 12/14] ARM: gic: add compute_irqnr macro for exynos4   Marc Zyngier
• [PATCH v7 13/14] ARM: SMP: automatically select ARM_GIC_VPPI   Marc Zyngier
• [PATCH v7 14/14] ARM: exynos4: switch MCT to the full local timer infrastructure   Marc Zyngier
• [PATCH] ARM: exynos4: fix secondary CPU boot   Marc Zyngier
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Marc Zyngier
• [RFC PATCH 01/16] ARM: local timers: early device probing hooks   Marc Zyngier
• [RFC PATCH 02/16] ARM: local timers: add arm_smp_twd driver to driver/clocksource   Marc Zyngier
• [RFC PATCH 03/16] ARM: local timers: move realview to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Marc Zyngier
• [RFC PATCH 04/16] ARM: local timers: move vexpress to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Marc Zyngier
• [RFC PATCH 05/16] ARM: local timers: remove localtimer.c from plat-versatile   Marc Zyngier
• [RFC PATCH 06/16] ARM: local timers: move Tegra to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Marc Zyngier
• [RFC PATCH 07/16] ARM: local timers: move OMAP4 to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Marc Zyngier
• [RFC PATCH 08/16] ARM: local timers: move shmobile to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Marc Zyngier
• [RFC PATCH 09/16] ARM: local timers: move ux500 to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Marc Zyngier
• [RFC PATCH 10/16] ARM: local timers: add exynos_mct driver to driver/clocksource   Marc Zyngier
• [RFC PATCH 11/16] ARM: local timers: move exynos4 to LOCAL_TIMER_DEVICES/EXYNOS_MCT/ARM_SMP_TWD   Marc Zyngier
• [RFC PATCH 12/16] ARM: watchdog: make mpcore_wdt independant from asm/smp_twd.h   Marc Zyngier
• [RFC PATCH 13/16] ARM: local timers: remove smp_twd from arch/arm   Marc Zyngier
• [RFC PATCH 14/16] ARM: local timers: add msm_timer driver to driver/clocksource   Marc Zyngier
• [RFC PATCH 15/16] ARM: local timers: move msm to LOCAL_TIMER_DEVICES/MSM_TIMER   Marc Zyngier
• [RFC PATCH 16/16] ARM: local timers: remove local timer support from arch/arm   Marc Zyngier
• [RFC PATCH 06/16] ARM: local timers: move Tegra to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Marc Zyngier
• [RFC PATCH 12/16] ARM: watchdog: make mpcore_wdt independant from asm/smp_twd.h   Marc Zyngier
• [RFC PATCH 07/16] ARM: local timers: move OMAP4 to LOCAL_TIMER_DEVICES/ARM_SMP_TWD   Marc Zyngier
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Marc Zyngier
• [RFC PATCH 01/16] ARM: local timers: early device probing hooks   Marc Zyngier
• [RFC PATCH 10/16] ARM: local timers: add exynos_mct driver to driver/clocksource   Marc Zyngier
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Marc Zyngier
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Marc Zyngier
• [PATCH] clocksource/arm_smp_twd: handle frequency changes   Marc Zyngier
• [RFC PATCH 01/11] irq: add irq_domain translation infrastructure   Marc Zyngier
• [PATCH] dt: early platform devices support   Marc Zyngier
• [PATCH] dt: early platform devices support   Marc Zyngier
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Marc Zyngier
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Marc Zyngier
• [RFC PATCH 00/16] Consolidation: move SMP local timers to driver/clocksource   Marc Zyngier
• [PATCH] ARM: clocksource/arm_smp_twd: remove superfluous per_cpu v=   Marc Zyngier
• [PATCH] clocksource/arm_smp_twd: handle frequency changes   Marc Zyngier
• [RFC PATCH 0/4] DT support for ARM GIC and TWD   Marc Zyngier
• [RFC PATCH 1/4] dt: early platform devices support   Marc Zyngier
• [RFC PATCH 2/4] ARM: dt: register local timers as early platform devices   Marc Zyngier
• [RFC PATCH 3/4] ARM: dt: add GIC bindings and driver support   Marc Zyngier
• [RFC PATCH 4/4] ARM: dt: Add TWD bindings and driver support   Marc Zyngier
• [RFC PATCH 1/4] dt: early platform devices support   Marc Zyngier
• [RFC PATCH 1/4] dt: early platform devices support   Marc Zyngier
• [RFC PATCH 3/4] ARM: dt: add GIC bindings and driver support   Marc Zyngier
• [RFC PATCH 4/4] ARM: dt: Add TWD bindings and driver support   Marc Zyngier
• [next][bug] rcu_dyntick_kick_cpu() kills ARM SMP.   Marc Zyngier
• [next][bug] rcu_dyntick_kick_cpu() kills ARM SMP.   Marc Zyngier
• [PATCH] ARM: realview, vexpress: fix section mismatch from platform_cpu_die() to pen_release   saeed bishara
• Problems with semaphores, mutexes, and atomic?   saeed bishara
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   saeed bishara
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   saeed bishara
• DMA setup for ARM platform with hole low in memory   johnlinn at comcast.net
• Pull request for Xilinx Zynq platform support   johnlinn at comcast.net
• Pull request for Xilinx Zynq platform support   johnlinn at comcast.net
• Pull request for Xilinx Zynq platform support   johnlinn at comcast.net
• Pull request [V2] for Xilinx Zynq platform support   johnlinn at comcast.net
• Pull request [V2] for Xilinx Zynq platform support   johnlinn at comcast.net
• Some questions about DRM(Direct Rendering Manager)   daeinki
• Some questions about DRM(Direct Rendering Manager)   daeinki
• Some questions about DRM(Direct Rendering Manager)   daeinki
• IRQS off tracer - is it useful or not?   murali at embeddedwireless.com
• [PATCH v3 0/3] provide sdhci driver for mmp2 and pxa910   zhangfei gao
• [PATCH v3 0/3] provide sdhci driver for mmp2 and pxa910   zhangfei gao
• [PATCH v3 0/3] provide sdhci driver for mmp2 and pxa910   zhangfei gao
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   zhangfei gao
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   zhangfei gao
• [PATCH v2 1/3] mmc: support sdhci-mmp2   zhangfei gao
• [PATCH v3 2/4] mmc: support sdhci-pxav2.c   zhangfei gao
• [PATCH v2 1/3] mmc: support sdhci-mmp2   zhangfei gao
• [PATCH v4 2/5] mmc: support sdhci-pxav2.c   zhangfei gao
• "Early" devices and the DT   glikely at secretlab.ca
• [PATCH RFC] at91: remove custom interrupt priority setting   manabian at gmail.com
• [PATCH V2 1/3] drivers/pwm st_pwm: Add support for ST's Pulse Width Modulator   viresh kumar
• [PATCH 1/3] gpio/spear-plgpio: Add plgpio driver for SPEAr platform   viresh kumar
• [PATCH V2 1/3] drivers/pwm st_pwm: Add support for ST's Pulse Width Modulator   viresh kumar
• kernel - userspace shared memory   viresh kumar
• [PATCH V2 0/3] Add drivers/pwm and drivers/pwm/st_pwm.c   viresh kumar
• [PATCH V2 0/3] Add drivers/pwm and drivers/pwm/st_pwm.c   viresh kumar
• [PATCH 0/2 RFC] arm/kirkwood: add dreamplug support.   linux_arm at lakedaemon.net
• [PATCH 1/2 RFC] arm/kirkwood: TEMP hack till mach-types is updated.   linux_arm at lakedaemon.net
• [PATCH 2/2 RFC] arm/kirkwood: add dreamplug support.   linux_arm at lakedaemon.net
• [patch 02/14] i8253: Unify all kernel declarations of i8253_lock in <linux/i8253.h>.   ralf at linux-mips.org
• [patch 11/14] i8253: Consolidate definitions of PIT_LATCH   ralf at linux-mips.org
• [patch 12/14] i8253: Move remaining content and delete <asm/i8253.h>   ralf at linux-mips.org
• Regarding GPIO usage in SD MMC code.   mindentropy
• [PATCH] OMAP3: run the ASM sleep code from DDR   jean.pihet at newoldbits.com
• [PATCH] ARM:SAMSUNG: Move S3C DMA driver to drivers/dma   root
• [RFC][PATCH 0/5] USB: DWC OTG: Add dwc_otg driver for S5P6440 samsung SoC.   p.paneri at samsung.com
• [RFC][PATCH 1/5] USB: DWC OTG: Modification in DWC OTG driver for ARM based SoCs.   p.paneri at samsung.com
• [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.   p.paneri at samsung.com
• [RFC][PATCH 3/5] ARM: SAMSUNG: Adding IO mapping for OTG PHY.   p.paneri at samsung.com
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   p.paneri at samsung.com
• [RFC][PATCH 5/5] ARM: S5P64x0: Adding OTG device for smdk6440   p.paneri at samsung.com
• [PATCH] dma-mapping: Undefine dma_map_single(), etc if CONFIG_HAVE_DMA_ATTRS is defined   pullip.cho at samsung.com
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   john stultz
• I am currently out of the office. Please forward emails to spratt at nortonlilly.com & ssmi   tsmith
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   padma venkat
• [PATCH 0/7] ARM: SAMSUNG: Cleanup SPI platform specific code   padma venkat
• [PATCH 3/7] ARM: SAMSUNG: Add SPI clock definitions for SAMSUNG SoCs   padma venkat
• [PATCH 0/7] ARM: SAMSUNG: Cleanup SPI platform specific code   padma venkat
• About secondary CPU resume PC address?   udmd-eric wann
• [PATCH] INPUT:Add ABS_PRESSURE input event support for touchscreen driver   daoguang wu
• [PATCH] INPUT:Add ABS_PRESSURE input event support for touchscreen driver   daoguang wu
• ep93xx: status/future of the sparsemem support   Petr Štetiar
• [PATCH v3] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Petr Štetiar
• [PATCH v4] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Petr Štetiar
• [PATCH v3] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Petr Štetiar
• [PATCH v4] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Petr Štetiar
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Petr Štetiar
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Petr Štetiar
• [PATCH v4] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Petr Štetiar
• [PATCH] ep93xx-eth: convert to phylib   Petr Štetiar
• [PATCH v2 1/5] ep93xx: set DMA masks for the ep93xx_eth   Petr Štetiar
• [PATCH 2/3] ts72xx: use MTDPART_OFS_RETAIN for mtd partitioning   Petr Štetiar
• [PATCH 2/3] ts72xx: use MTDPART_OFS_RETAIN for mtd partitioning   Petr Štetiar
• [PATCH 0/3] patches to allow DTB to be appended to the ARM zImage   Petr Štetiar
• [PATCH v2 0/5] ep93xx/ts72xx patches   Petr Štetiar
• [PATCH v2 1/5] ARM: ep93xx: use more reliable CPLD watchdog for reset on ts72xx   Petr Štetiar
• [PATCH v2 2/5] ARM: ep93xx: add model detection for ts-7300 and ts-7400 boards   Petr Štetiar
• [PATCH v2 3/5] ARM: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM   Petr Štetiar
• [PATCH v2 4/5] ARM: ep93xx: fix inverted RTS/DTR signals on uart1   Petr Štetiar
• [PATCH v2 5/5] ARM: ep93xx: ts72xx: fix board model detection   Petr Štetiar
• [PATCH v2 3/5] ARM: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM   Petr Štetiar
• [PATCH] arm mach-s3c2440 mach-mini2440: New LCD-W35i support   Денис Кузьменко