[PATCH 1/2] ARM:mach-mx5/board-mx51_babbage: Add CD and WP GPIOs

[Andre Silva]

Signed-off-by: Andre Silva <andre.silva at freescale.com>

---
 arch/arm/mach-mx5/board-mx51_babbage.c |   24 +++++++++++++++++++++---
 1 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 770f74b..3e58d5d 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -41,6 +41,10 @@
 #define BABBAGE_POWER_KEY	IMX_GPIO_NR(2, 21)
 #define BABBAGE_ECSPI1_CS0	IMX_GPIO_NR(4, 24)
 #define BABBAGE_ECSPI1_CS1	IMX_GPIO_NR(4, 25)
+#define BABBAGE_SD1_CD		IMX_GPIO_NR(1, 0)
+#define BABBAGE_SD1_WP		IMX_GPIO_NR(1, 1)
+#define BABBAGE_SD2_CD		IMX_GPIO_NR(1, 6)
+#define BABBAGE_SD2_WP		IMX_GPIO_NR(1, 5)
 
 /* USB_CTRL_1 */
 #define MX51_USB_CTRL_1_OFFSET			0x10
@@ -142,7 +146,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_SD1_DATA1__SD1_DATA1,
 	MX51_PAD_SD1_DATA2__SD1_DATA2,
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
+	MX51_PAD_GPIO1_0__GPIO1_0,
+	MX51_PAD_GPIO1_1__GPIO1_1,
+
 	/* SD 2 */
 	MX51_PAD_SD2_CMD__SD2_CMD,
 	MX51_PAD_SD2_CLK__SD2_CLK,
@@ -150,6 +156,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_SD2_DATA1__SD2_DATA1,
 	MX51_PAD_SD2_DATA2__SD2_DATA2,
 	MX51_PAD_SD2_DATA3__SD2_DATA3,
+	MX51_PAD_GPIO1_6__GPIO1_6,
+	MX51_PAD_GPIO1_5__GPIO1_5,
 
 	/* eCSPI1 */
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
@@ -331,6 +339,16 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
 	.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
 };
 
+static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
+	.cd_gpio = BABBAGE_SD1_CD,
+	.wp_gpio = BABBAGE_SD1_WP,
+};
+
+static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
+	.cd_gpio = BABBAGE_SD2_CD,
+	.wp_gpio = BABBAGE_SD2_WP,
+};
+
 /*
  * Board specific initialization.
  */
@@ -374,8 +392,8 @@ static void __init mx51_babbage_init(void)
 	mxc_iomux_v3_setup_pad(usbh1stp);
 	babbage_usbhub_reset();
 
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-	imx51_add_sdhci_esdhc_imx(1, NULL);
+	imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
+	imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
 
 	spi_register_board_info(mx51_babbage_spi_board_info,
 		ARRAY_SIZE(mx51_babbage_spi_board_info));
-- 
1.7.1