[PATCH v3 3/6] Exynos4 NURI: configure MAX17042 fuel gauge

[MyungJoo Ham]

Signed-off-by: MyungJoo Ham <myungjoo.ham at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
--
changed from v2
- Moved locations
---
 arch/arm/mach-exynos4/mach-nuri.c |   33 +++++++++++++++++++++++++++++++++
 1 files changed, 33 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index ec51f5c..2467a2a 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -13,8 +13,10 @@
 #include <linux/input.h>
 #include <linux/i2c.h>
 #include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/i2c-gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/power/max17042_battery.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/mfd/max8997.h>
@@ -954,6 +956,29 @@ static struct i2c_board_info i2c5_devs[] __initdata = {
 	},
 };
 
+static struct max17042_platform_data nuri_battery_platform_data = {
+};
+
+/* GPIO I2C 9 (Fuel Gauge) */
+static struct i2c_gpio_platform_data i2c9_gpio_data = {
+	.sda_pin		= EXYNOS4_GPY4(0),      /* XM0ADDR_8 */
+	.scl_pin		= EXYNOS4_GPY4(1),      /* XM0ADDR_9 */
+};
+static struct platform_device i2c9_gpio = {
+	.name			= "i2c-gpio",
+	.id			= 9,
+	.dev			= {
+		.platform_data	= &i2c9_gpio_data,
+	},
+};
+enum { I2C9_MAX17042};
+static struct i2c_board_info i2c9_devs[] __initdata = {
+	[I2C9_MAX17042] = {
+		I2C_BOARD_INFO("max17042", 0x36),
+		.platform_data = &nuri_battery_platform_data,
+	},
+};
+
 static void __init nuri_power_init(void)
 {
 	int gpio;
@@ -966,6 +991,11 @@ static void __init nuri_power_init(void)
 	gpio_request(gpio, "AP_PMIC_IRQ");
 	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
 	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+	gpio = EXYNOS4_GPX2(3);
+	gpio_request(gpio, "FUEL_ALERT");
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
 }
 
 /* USB EHCI */
@@ -989,6 +1019,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s3c_device_timer[0],
 	&s5p_device_ehci,
 	&s3c_device_i2c3,
+	&i2c9_gpio,
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -1015,6 +1046,8 @@ static void __init nuri_machine_init(void)
 	s3c_i2c5_set_platdata(NULL);
 	i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
+	i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
+	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 
 	nuri_ehci_init();
 	clk_xusbxti.rate = 24000000;
-- 
1.7.4.1