[PATCH v7 10/14] ARM: exynos4: use remapped PPI interrupts for local timer
Marc Zyngier
marc.zyngier at arm.com
Mon Jun 13 07:21:55 EDT 2011
Use the normal interrupt scheme for the local timers by using
a remapped PPI interrupt.
Tested on a SMDK-S5PV310 board.
Cc: Ben Dooks <ben-linux at fluff.org>
Cc: Kukjin Kim <kgene.kim at samsung.com>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
arch/arm/mach-exynos4/include/mach/entry-macro.S | 12 +-----------
arch/arm/mach-exynos4/localtimer.c | 3 ++-
arch/arm/plat-s5p/Kconfig | 1 +
3 files changed, 4 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index d8f38c2..f007168 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -50,7 +50,7 @@
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -72,13 +72,3 @@
cmpcs \irqnr, \irqnr
.endm
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/mach-exynos4/localtimer.c b/arch/arm/mach-exynos4/localtimer.c
index 6bf3d0a..315de6f 100644
--- a/arch/arm/mach-exynos4/localtimer.c
+++ b/arch/arm/mach-exynos4/localtimer.c
@@ -14,13 +14,14 @@
#include <asm/irq.h>
#include <asm/localtimer.h>
+#include <asm/hardware/gic.h>
/*
* Setup the local clock events for a CPU.
*/
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
- evt->irq = IRQ_LOCALTIMER;
+ evt->irq = gic_ppi_to_vppi(IRQ_LOCALTIMER);
twd_timer_setup(evt);
return 0;
}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index e98f5c5..46aba74 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -11,6 +11,7 @@ config PLAT_S5P
default y
select ARM_VIC if !ARCH_EXYNOS4
select ARM_GIC if ARCH_EXYNOS4
+ select ARM_GIC_VPPI if ARCH_EXYNOS4
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
--
1.7.0.4
More information about the linux-arm-kernel
mailing list