[PATCH] USB: ehci: use packed, aligned(4) instead of removing the packed attribute

[Nicolas Pitre]

On Mon, 20 Jun 2011, Alan Stern wrote:

> On Sun, 19 Jun 2011, Nicolas Pitre wrote:
> 
> > > > The question is: does the structure really has to be packed?
> > > 
> > > What do you mean?  The structure really does need to be allocated
> > > without padding between the fields; is that the same thing?  So do a
> > > bunch of other structures that currently have no annotations at all.
> > 
> > Yes, that's the same thing.  The packed attribute tells the compiler 
> > that you don't want it to insert padding in it as it sees fit.
> 
> I thought the packed attribute does more than that.  For example, on
> some architectures doesn't it also force the compiler to use
> byte-oriented instructions for accessing the structure's fields?

Yes, but that's a consequence of not being able to access those fields 
in their naturally aligned position anymore.  Hence the addition of the 
align attribute to tell the compiler that we know that the structure is 
still aligned to a certain degree letting the compiler to avoid 
byte-oriented instructions when possible.

> > > > If the answer is yes in both cases, then having packed,aligned(4) is not 
> > > > a frivolity but rather a correctness issue.
> > > 
> > > Why so?  Current systems work just fine without it.
> > 
> > Doesn't mean that because it used to work that it is strictly correct.  
> > Wouldn't be the first time that a GCC upgrade broke the kernel because 
> > the kernel wasn't describing things properly enough.
> 
> It seems most unlikely that a gcc upgrade would cause unnecessary 
> padding to be added between a bunch of fields, all of the same size and 
> alignment.

It is not the padding, but rather the decision to use or not to use 
byte-oriented instructions in the abscence of explicit alignment 
indication which appears to have changed with a recent GCC, which is the 
source of this thread.

> > > What if the intent is that the structure should be 4-byte aligned on 
> > > 32-bit systems and 8-byte aligned on 64-bit systems?  The compiler 
> > > already does this sort of thing automatically, why mess with it?
> > 
> > Above you say that the structure must not contain padding, and now you 
> > say that you want different alignment depending on whether or not the 
> > architecture is 32 or 64 bits?
> > 
> > /me confused now.
> 
> I looked at the structures in question; they contain nothing but u32
> values and arrays of u32's, except for an array of u8's at the end of
> one of the structures.  So this question doesn't arise for them.
> 
> On the other hand, one of the other structures you haven't been 
> considering looks like this (with a bunch of uninteresting #define 
> lines omitted):
> 
> struct ehci_qtd {
> 	/* first part defined by EHCI spec */
> 	__hc32			hw_next;	/* see EHCI 3.5.1 */
> 	__hc32			hw_alt_next;    /* see EHCI 3.5.2 */
> 	__hc32			hw_token;       /* see EHCI 3.5.3 */
> 	__hc32			hw_buf [5];        /* see EHCI 3.5.4 */
> 	__hc32			hw_buf_hi [5];        /* Appendix B */
> 
> 	/* the rest is HCD-private */
> 	dma_addr_t		qtd_dma;		/* qtd address */
> 	struct list_head	qtd_list;		/* sw qtd list */
> 	struct urb		*urb;			/* qtd's urb */
> 	size_t			length;			/* length of buffer */
> } __attribute__ ((aligned (32)));
> 
> (__hc32 is an unsigned 32-bit type which can be either big-endian or 
> little-endian, depending on the device hardware.)
> 
> Only the first 5 fields need to be allocated without padding; the last 
> 4 can be laid out arbitrarily because they do not correspond to 
> anything in the hardware.  Once again, I do not think the ((packed)) 
> attribute is needed here -- in fact, we probably want to avoid it 
> because dma_addr_t can be 64 bits even on 32-bit architectures.

Indeed, nothing indicates that any packed attribute is required here.


Nicolas