[PATCH 1/5] ARM: EXYNOS4: Add EPLL clock operations

[Kukjin Kim]

Naveen Krishna Chatradhi wrote:
> 
> This patch adds EPLL specific clock get_rate/set_rate
> operations on EXYNOS4.
> 
> Note: Initial code from S5PV210
> http://permalink.gmane.org/gmane.linux.alsa.devel/77519
> 
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen at samsung.com>
> ---
>  arch/arm/mach-exynos4/clock.c |   78
> +++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 78 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
> index b1b93b9..7aa4aef 100644
> --- a/arch/arm/mach-exynos4/clock.c
> +++ b/arch/arm/mach-exynos4/clock.c
> @@ -1276,6 +1276,82 @@ static struct clksrc_clk *sysclks[] = {
>  	&clk_sclk_audio2,
>  };
> 
> +static u32 epll_div[][6] = {
> +	{  48000000, 0, 48, 3, 3, 0 },
> +	{  96000000, 0, 48, 3, 2, 0 },
> +	{ 144000000, 1, 72, 3, 2, 0 },
> +	{ 192000000, 0, 48, 3, 1, 0 },
> +	{ 288000000, 1, 72, 3, 1, 0 },
> +	{  32750000, 1, 65, 3, 4, 35127 },
> +	{  32768000, 1, 65, 3, 4, 35127 },
> +	{  45158400, 0, 45, 3, 3, 10355 },
> +	{  45000000, 0, 45, 3, 3, 10355 },
> +	{  45158000, 0, 45, 3, 3, 10355 },
> +	{  49125000, 0, 49, 3, 3, 9961 },
> +	{  49152000, 0, 49, 3, 3, 9961 },
> +	{  67737600, 1, 67, 3, 3, 48366 },
> +	{  67738000, 1, 67, 3, 3, 48366 },
> +	{  73800000, 1, 73, 3, 3, 47710 },
> +	{  73728000, 1, 73, 3, 3, 47710 },
> +	{  36000000, 1, 32, 3, 4, 0 },
> +	{  60000000, 1, 60, 3, 3, 0 },
> +	{  72000000, 1, 72, 3, 3, 0 },
> +	{  80000000, 1, 80, 3, 3, 0 },
> +	{  84000000, 0, 42, 3, 2, 0 },
> +	{  50000000, 0, 50, 3, 3, 0 },
> +};
> +
> +static int exynos4_epll_set_rate(struct clk *clk, unsigned long rate)
> +{
> +	unsigned int epll_con, epll_con_k;
> +	unsigned int i;
> +
> +	/* Return if nothing changed */
> +	if (clk->rate == rate)
> +		return 0;
> +
> +	epll_con = __raw_readl(S5P_EPLL_CON);
> +	epll_con_k = __raw_readl(S5P_EPLL_CON1);
> +
> +	epll_con_k &= ~PLL46XX_KDIV_MASK;
> +	epll_con &= ~(1 << 27 |
> +			PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |
> +			PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |
> +			PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
> +
> +	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
> +		if (epll_div[i][0] == rate) {
> +			epll_con_k |= epll_div[i][5] << 0;
> +			epll_con |= (epll_div[i][1] << 27 |
> +					epll_div[i][2] <<
> PLL46XX_MDIV_SHIFT |
> +					epll_div[i][3] <<
> PLL46XX_PDIV_SHIFT |
> +					epll_div[i][4] <<
> PLL46XX_SDIV_SHIFT);
> +			break;
> +		}
> +	}
> +
> +	if (i == ARRAY_SIZE(epll_div)) {
> +		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
> +				__func__);
> +		return -EINVAL;
> +	}
> +
> +	__raw_writel(epll_con, S5P_EPLL_CON);
> +	__raw_writel(epll_con_k, S5P_EPLL_CON1);
> +
> +	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
> +			clk->rate, rate);
> +
> +	clk->rate = rate;
> +
> +	return 0;
> +}

I think, this is same with S5PV210.

Would be better if this could be moved into plat-s5p/ with other set_pllXXX.

> +
> +static struct clk_ops exynos4_epll_ops = {
> +	.set_rate = exynos4_epll_set_rate,
> +	.get_rate = s5p_epll_get_rate,
> +};
> +
>  static int xtal_rate;
> 
>  static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
> @@ -1354,6 +1430,8 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
>  	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
>  		s3c_set_clksrc(&clksrcs[ptr], true);
> 
> +	clk_fout_epll.ops = &exynos4_epll_ops;
> +
>  	clk_audiocdclk0.rate = PCM_EXTCLK0;
>  	clk_set_parent(&clk_sclk_audio0.clk, &clk_audiocdclk0);
>  }
> --



Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.