[PATCH v3 2/4] mmc: support sdhci-pxav2.c
Philip Rakity
prakity at marvell.com
Fri Jun 3 14:42:12 EDT 2011
On Jun 3, 2011, at 2:50 AM, Zhangfei Gao wrote:
> SDHCI driver for pxav2 SoCs, such as pxa910, the driver based on sdhci-pltfm to handle resource etc.
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao at marvell.com>
> Signed-off-by: Jun Nie <njun at marvell.com>
> Signed-off-by: Qiming Wu <wuqm at marvell.com>
> ---
> drivers/mmc/host/Kconfig | 11 ++
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-pxav2.c | 261 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 273 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mmc/host/sdhci-pxav2.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 4ee869a..1a53d59 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -192,6 +192,17 @@ config MMC_SDHCI_PXAV3
>
> If unsure, say N.
>
> +config MMC_SDHCI_PXAV2
> + tristate "Marvell PXAV2 SD Host Controller support"
> + select MMC_SDHCI
> + select MMC_SDHCI_PLTFM
> + help
> + This selects the Marvell(R) PXAV2 SD Host Controller.
> + If you have a PXAV2 platform (such as pxa910) with SD Host Controller
> + and a card slot, say Y or M here.
> +
> + If unsure, say N.
> +
> config MMC_SDHCI_SPEAR
> tristate "SDHCI support on ST SPEAr platform"
> depends on MMC_SDHCI && PLAT_SPEAR
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 9131a27..cf95330 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
> obj-$(CONFIG_MMC_SDHCI) += sdhci.o
> obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
> obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
> +obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o
> obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
> obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
> obj-$(CONFIG_MMC_WBSD) += wbsd.o
> diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
> new file mode 100644
> index 0000000..759f526
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-pxav2.c
> @@ -0,0 +1,261 @@
> +/*
> + * Copyright (C) 2010 Marvell International Ltd.
> + * Zhangfei Gao <zhangfei.gao at marvell.com>
> + * Kevin Wang <dwang4 at marvell.com>
> + * Jun Nie <njun at marvell.com>
> + * Qiming Wu <wuqm at marvell.com>
> + * Philip Rakity <prakity at marvell.com>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/gpio.h>
> +#include <linux/mmc/card.h>
> +#include <linux/mmc/host.h>
> +#include <plat/sdhci.h>
> +#include <linux/slab.h>
> +#include "sdhci.h"
> +#include "sdhci-pltfm.h"
> +
> +#define SD_FIFO_PARAM 0xe0
> +#define DIS_PAD_SD_CLK_GATE 0x0400 /* Turn on/off Dynamic SD Clock Gating */
> +#define CLK_GATE_ON 0x0200 /* Disable/enable Clock Gate */
> +#define CLK_GATE_CTL 0x0100 /* Clock Gate Control */
> +#define CLK_GATE_SETTING_BITS (DIS_PAD_SD_CLK_GATE | \
> + CLK_GATE_ON | CLK_GATE_CTL)
> +
> +#define SD_CLOCK_BURST_SIZE_SETUP 0xe6
> +#define SDCLK_SEL_SHIFT 8
> +#define SDCLK_SEL_MASK 0x3
> +#define SDCLK_DELAY_SHIFT 10
> +#define SDCLK_DELAY_MASK 0x3c
> +
> +#define SDHCI_HOST_CONTROL 0x28
> +#define SDHCI_CTRL_4BITBUS 0x02
> +
> +#define SD_CE_ATA_2 0xea
> +#define MMC_CARD 0x1000
> +#define MMC_WIDTH 0x0100
> +
> +static void pxav2_set_private_registers(struct sdhci_host *host, u8 mask)
> +{
> + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
> + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
> +
> + if (mask == SDHCI_RESET_ALL) {
> + u16 tmp = 0;
> +
> + /*
> + * tune timing of read data/command when crc error happen
> + * no performance impact
> + */
> + if (pdata->clk_delay_sel == 1) {
> + tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
> +
> + tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT);
> + tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
> + << SDCLK_DELAY_SHIFT;
> + tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT);
> + tmp |= (1 & SDCLK_SEL_MASK) << SDCLK_SEL_SHIFT;
> +
> + writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
> + }
> +
> + if (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING) {
> + tmp = readw(host->ioaddr + SD_FIFO_PARAM);
> + tmp &= ~CLK_GATE_SETTING_BITS;
> + writew(tmp, host->ioaddr + SD_FIFO_PARAM);
> + } else {
> + tmp = readw(host->ioaddr + SD_FIFO_PARAM);
> + tmp &= ~CLK_GATE_SETTING_BITS;
> + tmp |= CLK_GATE_SETTING_BITS;
> + writew(tmp, host->ioaddr + SD_FIFO_PARAM);
> + }
> + }
> +}
> +
> +static int pxav2_mmc_set_width(struct sdhci_host *host, int width)
> +{
> + u8 ctrl;
> + u16 tmp;
> +
> + ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
> + tmp = readw(host->ioaddr + SD_CE_ATA_2);
> + if (width == MMC_BUS_WIDTH_8) {
> + ctrl &= ~SDHCI_CTRL_4BITBUS;
> + tmp |= MMC_CARD | MMC_WIDTH;
> + } else {
> + tmp &= ~(MMC_CARD | MMC_WIDTH);
> + if (width == MMC_BUS_WIDTH_4)
> + ctrl |= SDHCI_CTRL_4BITBUS;
> + else
> + ctrl &= ~SDHCI_CTRL_4BITBUS;
> + }
> + writew(tmp, host->ioaddr + SD_CE_ATA_2);
> + writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
> +
> + return 0;
> +}
> +
> +static unsigned int pxav2_get_ro(struct sdhci_host *host)
> +{
> + /* Micro SD does not support write-protect feature */
> + return 0;
> +}
> +
> +static u32 pxav2_get_max_clock(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> + return clk_get_rate(pltfm_host->clk);
> +}
> +
> +static struct sdhci_ops pxav2_sdhci_ops = {
> + .get_ro = pxav2_get_ro,
> + .get_max_clock = pxav2_get_max_clock,
> + .platform_reset_exit = pxav2_set_private_registers,
> + .platform_8bit_width = pxav2_mmc_set_width,
> +};
> +
> +static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
> +{
> + struct sdhci_pltfm_host *pltfm_host;
> + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
> + struct device *dev = &pdev->dev;
> + struct sdhci_host *host = NULL;
> + struct sdhci_pxa *pxa = NULL;
> + int ret;
> + struct clk *clk;
> +
> + pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
> + if (!pxa)
> + return -ENOMEM;
> +
> + host = sdhci_pltfm_init(pdev, NULL);
> + if (IS_ERR(host)) {
> + kfree(pxa);
> + return PTR_ERR(host);
> + }
> + pltfm_host = sdhci_priv(host);
> + pltfm_host->priv = pxa;
> +
> + clk = clk_get(dev, "PXA-SDHCLK");
> + if (IS_ERR(clk)) {
> + dev_err(dev, "failed to get io clock\n");
> + ret = PTR_ERR(clk);
> + goto err_clk_get;
> + }
> + pltfm_host->clk = clk;
> + clk_enable(clk);
> +
> + host->quirks = SDHCI_QUIRK_BROKEN_ADMA
> + | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
> + | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
> +
> + if (pdata) {
> + if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
> + /* on-chip device */
> + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
> + host->mmc->caps |= MMC_CAP_NONREMOVABLE;
> + }
> +
> + /* If slot design supports 8 bit data, indicate this to MMC. */
> + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
> + host->mmc->caps |= MMC_CAP_8_BIT_DATA;
> +
> + if (pdata->quirks)
> + host->quirks |= pdata->quirks;
> + if (pdata->host_caps)
> + host->mmc->caps |= pdata->host_caps;
> + if (pdata->pm_caps)
> + host->mmc->pm_caps |= pdata->pm_caps;
> + }
> +
> + host->ops = &pxav2_sdhci_ops;
> +
> + ret = sdhci_add_host(host);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to add host\n");
> + goto err_add_host;
> + }
> +
> + if (pdata && pdata->max_speed) {
> + host->mmc->f_max = pdata->max_speed;
> + if (!(host->mmc->f_max > 25000000))
> + host->mmc->caps &= ~(MMC_CAP_SD_HIGHSPEED |
> + MMC_CAP_MMC_HIGHSPEED);
> + }
This should be done before calling add_host. Add the callback to set f_max()
https://patchwork.kernel.org/patch/742301/
> +
> + platform_set_drvdata(pdev, host);
> +
>
> + return 0;
> +
> +err_add_host:
> + clk_disable(clk);
> + clk_put(clk);
> +err_clk_get:
> + sdhci_pltfm_free(pdev);+ kfree(pxa);
> + return ret;
> +}
> +
> +static int __devexit sdhci_pxav2_remove(struct platform_device *pdev)
> +{
> + struct sdhci_host *host = platform_get_drvdata(pdev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_pxa *pxa = pltfm_host->priv;
> +
> + sdhci_remove_host(host, 1);
> +
> + clk_disable(pltfm_host->clk);
> + clk_put(pltfm_host->clk);
> + sdhci_pltfm_free(pdev);
> + kfree(pxa);
> +
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static struct platform_driver sdhci_pxav2_driver = {
> + .driver = {
> + .name = "sdhci-pxav2",
> + .owner = THIS_MODULE,
> + },
> + .probe = sdhci_pxav2_probe,
> + .remove = __devexit_p(sdhci_pxav2_remove),
> +#ifdef CONFIG_PM
> + .suspend = sdhci_pltfm_suspend,
> + .resume = sdhci_pltfm_resume,
> +#endif
could you please post to mmc mailing list code that sets up sdhci-pxav2.
> +};
> +static int __init sdhci_pxav2_init(void)
> +{
> + return platform_driver_register(&sdhci_pxav2_driver);
> +}
> +
> +static void __exit sdhci_pxav2_exit(void)
> +{
> + platform_driver_unregister(&sdhci_pxav2_driver);
> +}
> +
> +module_init(sdhci_pxav2_init);
> +module_exit(sdhci_pxav2_exit);
> +
> +MODULE_DESCRIPTION("SDHCI driver for pxav2");
> +MODULE_AUTHOR("Marvell International Ltd.");
> +MODULE_LICENSE("GPL v2");
> +
> --
> 1.7.0.4
>
More information about the linux-arm-kernel
mailing list