[PATCH v6 11/11] mmc: add handling for two parallel block requests in issue_rw_rq

[Per Forlin]

On 20 June 2011 17:17, Kishore Kadiyala <kishorek.kadiyala at gmail.com> wrote:
> On Mon, Jun 20, 2011 at 2:47 AM, Per Forlin <per.forlin at linaro.org> wrote:
>> Change mmc_blk_issue_rw_rq() to become asynchronous.
>> The execution flow looks like this:
>> The mmc-queue calls issue_rw_rq(), which sends the request
>> to the host and returns back to the mmc-queue. The mmc-queue calls
>> issue_rw_rq() again with a new request. This new request is prepared,
>> in isuue_rw_rq(), then it waits for the active request to complete before
>> pushing it to the host. When to mmc-queue is empty it will call
>> isuue_rw_rq() with req=NULL to finish off the active request
>> without starting a new request.
>>
>> Signed-off-by: Per Forlin <per.forlin at linaro.org>
>> ---
>>  drivers/mmc/card/block.c |  121 +++++++++++++++++++++++++++++++++-------------
>>  drivers/mmc/card/queue.c |   17 +++++--
>>  drivers/mmc/card/queue.h |    1 +
>>  3 files changed, 101 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
>> index 6a84a75..66db77a 100644
>> --- a/drivers/mmc/card/block.c
>> +++ b/drivers/mmc/card/block.c
>> @@ -108,6 +108,7 @@ static DEFINE_MUTEX(open_lock);
>>
>>  enum mmc_blk_status {
>>        MMC_BLK_SUCCESS = 0,
>> +       MMC_BLK_PARTIAL,
>>        MMC_BLK_RETRY,
>>        MMC_BLK_DATA_ERR,
>>        MMC_BLK_CMD_ERR,
>> @@ -668,14 +669,16 @@ static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq,
>>        }
>>  }
>>
>> -static enum mmc_blk_status mmc_blk_err_check(struct mmc_blk_request *brq,
>> -                                            struct request *req,
>> -                                            struct mmc_card *card,
>> -                                            struct mmc_blk_data *md)
>> +static int mmc_blk_err_check(struct mmc_card *card,
>> +                            struct mmc_async_req *areq)
>>  {
>>        struct mmc_command cmd;
>>        u32 status = 0;
>>        enum mmc_blk_status ret = MMC_BLK_SUCCESS;
>> +       struct mmc_queue_req *mq_mrq = container_of(areq, struct mmc_queue_req,
>> +                                                   mmc_active);
>> +       struct mmc_blk_request *brq = &mq_mrq->brq;
>> +       struct request *req = mq_mrq->req;
>>
>>        /*
>>         * Check for errors here, but don't jump to cmd_err
>> @@ -770,7 +773,11 @@ static enum mmc_blk_status mmc_blk_err_check(struct mmc_blk_request *brq,
>>                else
>>                        ret = MMC_BLK_DATA_ERR;
>>        }
>> -out:
>> +
>> +       if (ret == MMC_BLK_SUCCESS &&
>> +           blk_rq_bytes(req) != brq->data.bytes_xfered)
>> +               ret = MMC_BLK_PARTIAL;
>> + out:
>>        return ret;
>>  }
>>
>> @@ -901,27 +908,59 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
>>                brq->data.sg_len = i;
>>        }
>>
>> +       mqrq->mmc_active.mrq = &brq->mrq;
>> +       mqrq->mmc_active.err_check = mmc_blk_err_check;
>> +
>>        mmc_queue_bounce_pre(mqrq);
>>  }
>>
>> -static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
>> +static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
>>  {
>>        struct mmc_blk_data *md = mq->data;
>>        struct mmc_card *card = md->queue.card;
>> -       struct mmc_blk_request *brq = &mq->mqrq_cur->brq;
>> -       int ret = 1, disable_multi = 0;
>> +       struct mmc_blk_request *brq;
>> +       int ret = 1;
>> +       int disable_multi = 0;
>>        enum mmc_blk_status status;
>> +       struct mmc_queue_req *mq_rq;
>> +       struct request *req;
>> +       struct mmc_async_req *areq;
>> +
>> +       if (!rqc && !mq->mqrq_prev->req)
>> +               goto out;
>>
>>        do {
>> -               mmc_blk_rw_rq_prep(mq->mqrq_cur, card, disable_multi, mq);
>> -               mmc_wait_for_req(card->host, &brq->mrq);
>> +               if (rqc) {
>> +                       mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
>> +                       areq = &mq->mqrq_cur->mmc_active;
>> +               } else
>> +                       areq = NULL;
>> +               areq = mmc_start_req(card->host, areq, (int *) &status);
>
> I think 'status' is used uninitialized.
> With this struct mmc_async_req *mmc_start_req in your first patch
> if (error)
>        *error = err;
> return data;
> condition which always passes.
It's valid to pass in NULL as status.
Do you suggest to make the status pointer mandatory?

>
> You can have
> enum mmc_blk_status status = MMC_BLK_SUCCESS;
>
status will be set to MMC_BLK_SUCCESS for the first iteration of the
do-while loop.
It may look like:
MMC_BLK_RETRY
MMC_BLK_PARTIAL
MMC_BLK_PARTIAL
MMC_BLK_PARTIAL
MMC_BLK_SUCCESS

This means mmc_start_req needs to return MMC_BLK_SUCCESS.

Regards,
Per