[PATCH 1/2] gpio/mxs: remove irq_high related implementation

[Shawn Guo]

The irq_high stuff was mistakenly copied from mxc gpio driver.
The mxs gpio controller has only one irq line for each 32-pin
gpio port.  The patch remove irq_high related codes.

Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
 drivers/gpio/gpio-mxs.c |   18 ++++--------------
 1 files changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index 9d2dba7..ddde0f4 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -53,7 +53,6 @@ struct mxs_gpio_port {
 	void __iomem *base;
 	int id;
 	int irq;
-	int irq_high;
 	int virtual_irq_start;
 	struct bgpio_chip bgc;
 };
@@ -174,21 +173,12 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
  */
 static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
 {
-	u32 gpio = irq_to_gpio(d->irq);
-	u32 gpio_idx = gpio & 0x1f;
 	struct mxs_gpio_port *port = irq_data_get_irq_chip_data(d);
 
-	if (enable) {
-		if (port->irq_high && (gpio_idx >= 16))
-			enable_irq_wake(port->irq_high);
-		else
-			enable_irq_wake(port->irq);
-	} else {
-		if (port->irq_high && (gpio_idx >= 16))
-			disable_irq_wake(port->irq_high);
-		else
-			disable_irq_wake(port->irq);
-	}
+	if (enable)
+		enable_irq_wake(port->irq);
+	else
+		disable_irq_wake(port->irq);
 
 	return 0;
 }
-- 
1.7.4.1