[PATCH REPOST] pxa/hx4700: Add ASIC3 LED support

[Fabio Estevam]

On Wed, Jun 22, 2011 at 4:31 PM, Paul Parsons <lost.distance at yahoo.com> wrote:
> Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.
>
> Signed-off-by: Paul Parsons <lost.distance at yahoo.com>
> ---
>
> This part of the HTC ASIC3 LED driver patch set was seemingly dropped, hence repost.
>
> --- clean-3.0-rc4/arch/arm/mach-pxa/hx4700.c    2011-06-21 04:25:46.000000000 +0100
> +++ linux-3.0-rc4/arch/arm/mach-pxa/hx4700.c    2011-06-22 10:43:18.986382990 +0100
> @@ -280,6 +280,21 @@ static u16 asic3_gpio_config[] = {
>        ASIC3_GPIOD15_nPIOW,
>  };
>
> +static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
> +       [0] = {
> +               .name = "hx4700:amber",
> +               .default_trigger = "ds2760-battery.0-charging-blink-full-solid",
> +       },
> +       [1] = {
> +               .name = "hx4700:green",
> +               .default_trigger = "unused",
> +       },
> +       [2] = {
> +               .name = "hx4700:blue",
> +               .default_trigger = "hx4700-radio",
> +       },
> +};

Can't you use the generic LED driver instead? See an example here:
http://git.pengutronix.de/?p=imx/linux-2.6.git;a=commitdiff;h=cf1738dad02f22781ae1f08414634086fc613d81

Regards,

Fabio Estevam