[PATCH] s3c2410_udc: fix custom UDC command handling

[Viliam Mateicka]

So, will somebody at least react/reply (or just fix) ?

Vilo

On Thu, Jun 16, 2011 at 10:04 AM, Viliam Mateicka
<viliam.mateicka at gmail.com> wrote:
> There is a bug in Samsung's UDC driver, which is completely disabling
> the USB device when a custom UDC command is used.
> Following patch seems to get the right behavior (e.g. enabling pull-up
> instead of disabling then Vcc is applied). Also I'm not in mailing
> list so please CC me.
>
> Greetingz,
> Vilo
>
> Signed-off-by: Viliam Mateicka <viliam.mateicka at gmail.com>
>
> --- drivers/usb/gadget/s3c2410_udc.c.orig       2011-05-19
> 06:06:34.000000000 +0200
> +++ drivers/usb/gadget/s3c2410_udc.c    2011-06-16 08:57:19.000000000 +0200
> @@ -1566,7 +1566,7 @@ static void s3c2410_udc_command(enum s3c
>                 return;
>         if (udc_info->udc_command) {
> -               udc_info->udc_command(S3C2410_UDC_P_DISABLE);
> +               udc_info->udc_command(cmd);
>         } else if (gpio_is_valid(udc_info->pullup_pin)) {
>                 int value;
>