[PATCH 1/3] serial/imx: add device tree support
robherring2 at gmail.com
Sun Jun 19 11:15:42 EDT 2011
On 06/19/2011 10:05 AM, Grant Likely wrote:
> On Sun, Jun 19, 2011 at 1:30 AM, Shawn Guo <shawn.guo at freescale.com> wrote:
>> On Sat, Jun 18, 2011 at 10:19:34AM -0600, Grant Likely wrote:
>>> On Sat, Jun 18, 2011 at 11:19:12PM +0800, Shawn Guo wrote:
>>>> It adds device tree data parsing support for imx tty/serial driver.
>>>> Signed-off-by: Jeremy Kerr <jeremy.kerr at canonical.com>
>>>> Signed-off-by: Jason Liu <jason.hui at linaro.org>
>>>> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
>>>> Cc: Sascha Hauer <s.hauer at pengutronix.de>
>>>> .../bindings/tty/serial/fsl-imx-uart.txt | 21 +++++
>>>> drivers/tty/serial/imx.c | 81 +++++++++++++++++---
>>>> 2 files changed, 92 insertions(+), 10 deletions(-)
>>>> create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
>>>> diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
>>>> new file mode 100644
>>>> index 0000000..7648e17
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
>>>> @@ -0,0 +1,21 @@
>>>> +* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
>>>> +Required properties:
>>>> +- compatible : should be "fsl,<soc>-uart", "fsl,imx-uart"
>>> I'd make this "fsl,<soc>-uart", "fsl,imx51-uart"
>>> It's better to anchor these things on real silicon, or a real ip block
>>> specification rather than something pseudo-generic. Subsequent chips,
>>> like the imx53, should simply claim compatibility with the older
>> It is a real IP block on all imx silicons (except imx23 and imx28
>> which are known as former stmp).
>>> (in essence, "fsl,imx51-uart" becomes the generic string without the
>>> downside of having no obvious recourse when new silicon shows up that
>>> is an imx part, but isn't compatible with the imx51 uart.
>> In this case, should imx1 the ancestor of imx family than imx51
>> becomes part of that generic string? Claiming uart of imx1, imx21
>> and imx31 (senior than imx51) compatible with the imx51 uart seems
>> odd to me.
>> That said, IMO, "fsl,imx-uart" stands a real IP block specification
>> here and can be a perfect generic compatibility string to tell the
>> recourse of any imx silicon using this IP.
> Yes, but which /version/ of the IP block? Hardware designers are
> notorious for changing hardware designs for newer silicon, sometimes
> to add features, sometimes to fix bugs. While I understand the
> temptation to boil a compatible value down to a nice clean generic
> string, doing so only works in a perfect world. In the real world,
> you still need to have some information about the specific
> implementation. I prefer this specifying it to the SoC name, but I've
> been known to be convinced that specifying it to the ip-block name &
> version in certain circumstances, like for IP blocks in an FPGA, or
> some of the Freescale powerpc pXXXX SoCs which actually had an IP
> block swapped out midway through the life of the chip.
There are definitely uart changes along the way with each generation.
> Besides, encoding an soc or ip block version into the 'generic'
> compatible values is not just good practice, it has *zero downside*.
> That's the beauty of the compatible property semantics. Any node can
> claim compatibility with an existing device. If no existing device
> fits correctly, then the node simple does not claim compatibility.
> Drivers can bind to any number of compatible strings, so it would be
> just fine for the of_match_table list to include both "fsl,imx-21" and
> "fsl,imx-51" (assuming that is the appropriate solution in this case).
Don't you need uart or serial in here somewhere.
More information about the linux-arm-kernel