[PATCH v3 04/12] Serial: OMAP: Add runtime pm support for omap-serial driver

[Govindraj]

On Thu, Jun 9, 2011 at 2:09 AM, Jon Hunter <jon-hunter at ti.com> wrote:
> Hi Govindraj,
>
> On 6/8/2011 6:23 AM, Govindraj.R wrote:
>
> [snip]
>
>> +
>> +#define OMAP_UART_AUTOSUSPEND_DELAY (30 * HZ) /* Value is msecs */
>
> [snip]
>
>> @@ -1295,18 +1381,36 @@ static int serial_omap_probe(struct
>> platform_device *pdev)
>>                up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
>>        }
>>
>> +       pm_runtime_use_autosuspend(&pdev->dev);
>> +       pm_runtime_set_autosuspend_delay(&pdev->dev,
>> +                       OMAP_UART_AUTOSUSPEND_DELAY);
>
> Something is weird here...DEFAULT_AUTOSUSPEND_DELAY is defined as (30*HZ)
> which would appear to be jiffies (ticks per second) and NOT msecs. However,
> pm_runtime_set_autosuspend is clearly expecting msecs. So this seems to
> conflict. By default 30*HZ for omap would be 30*128 = 3840ms so not quite 4
> seconds.
>
> What were you intending here?

Intention is to get approx 3 secs timeout for autosuspend.

--
Thanks,
Govindraj.R

>
> Cheers
> Jon
> --
> To unsubscribe from this list: send the line "unsubscribe linux-serial" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>