[PATCH 3/3] I2C: OMAP: remove racy suspend/resume callbacks

[Kevin Hilman]

Current system PM methods for this driver race with the runtime PM
methods when an i2c xfer is in progress when the system suspend path
is excuted.

These callbacks are only needed when runtime PM is disabled from
userspace, so for now we accept that this device will not hit
retention, even in suspend, if runtime PM disabled.

The correct fix (forthcoming) for v3.0+ is to use device power domain
callbacks at the system PM level to handle this, but for now, this
avoids the race.

Signed-off-by: Kevin Hilman <khilman at ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   20 --------------------
 1 files changed, 0 insertions(+), 20 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 4e3256f..77ed95f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1150,27 +1150,7 @@ static int omap_i2c_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static int omap_i2c_suspend(struct device *dev)
-{
-	if (!pm_runtime_suspended(dev))
-		if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
-			dev->bus->pm->runtime_suspend(dev);
-
-	return 0;
-}
-
-static int omap_i2c_resume(struct device *dev)
-{
-	if (!pm_runtime_suspended(dev))
-		if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
-			dev->bus->pm->runtime_resume(dev);
-
-	return 0;
-}
-
 static struct dev_pm_ops omap_i2c_pm_ops = {
-	.suspend = omap_i2c_suspend,
-	.resume = omap_i2c_resume,
 	.runtime_suspend = omap_i2c_runtime_suspend,
 	.runtime_resume = omap_i2c_runtime_resume,
 };
-- 
1.7.4