[PATCH] ARM: mach-s3c24a0: delete
Ben Dooks
ben at trinity.fluff.org
Tue Jun 28 17:17:12 EDT 2011
On Tue, Jun 28, 2011 at 04:17:30PM -0400, Nicolas Pitre wrote:
>
> Commit bcae8aeb32 "[ARM] S3C24A0: Initial architecture support files"
> brought in a bunch of files while explicitly leaving out the corresponding
> Kconfig entry, stating that the series is not complete.
>
> More than 2.5 years later, the support for this has not seen any progress.
> This is therefore dead code. If someone wants to revive this code, it is
> always possible to retrieve it from the Git repository.
Ok, there was never much interest in this getting merged and removing
it is probably the best thing as I do not have the time to finish it
off...
> Signed-off-by: Nicolas Pitre <nicolas.pitre at linaro.org>
Acked-by: Ben Dooks <ben-linux at fluff.org>
> ---
> arch/arm/Makefile | 1 -
> arch/arm/mach-s3c24a0/include/mach/debug-macro.S | 27 -----
> arch/arm/mach-s3c24a0/include/mach/io.h | 18 ----
> arch/arm/mach-s3c24a0/include/mach/irqs.h | 117 ----------------------
> arch/arm/mach-s3c24a0/include/mach/map.h | 86 ----------------
> arch/arm/mach-s3c24a0/include/mach/memory.h | 21 ----
> arch/arm/mach-s3c24a0/include/mach/regs-clock.h | 88 ----------------
> arch/arm/mach-s3c24a0/include/mach/regs-irq.h | 25 -----
> arch/arm/mach-s3c24a0/include/mach/system.h | 25 -----
> arch/arm/mach-s3c24a0/include/mach/tick.h | 15 ---
> arch/arm/mach-s3c24a0/include/mach/timex.h | 18 ----
> arch/arm/mach-s3c24a0/include/mach/vmalloc.h | 17 ---
> 12 files changed, 0 insertions(+), 458 deletions(-)
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index f5b2b39..64d2591 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -173,7 +173,6 @@ machine-$(CONFIG_ARCH_PXA) := pxa
> machine-$(CONFIG_ARCH_REALVIEW) := realview
> machine-$(CONFIG_ARCH_RPC) := rpc
> machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
> -machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
> machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
> machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
> machine-$(CONFIG_ARCH_S5PC100) := s5pc100
> diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
> deleted file mode 100644
> index 0c5a738..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -/* pull in the relevant register and map files. */
> -
> -#include <mach/map.h>
> -#include <plat/regs-serial.h>
> -
> - .macro addruart, rp, rv
> - ldr \rp, = S3C24XX_PA_UART
> - ldr \rv, = S3C24XX_VA_UART
> -#if CONFIG_DEBUG_S3C_UART != 0
> - add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
> - add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
> -#endif
> - .endm
> -
> -/* include the reset of the code which will do the work, we're only
> - * compiling for a single cpu processor type so the default of s3c2440
> - * will be fine with us.
> - */
> -
> -#include <plat/debug-macro.S>
> diff --git a/arch/arm/mach-s3c24a0/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h
> deleted file mode 100644
> index 4326c30..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/io.h
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -/* arch/arm/mach-s3c24a0/include/mach/io.h
> - *
> - * Copyright 2008 Simtec Electronics
> - * Ben Dooks <ben-linux at fluff.org>
> - *
> - * Default IO routines for S3C24A0
> - */
> -
> -#ifndef __ASM_ARM_ARCH_IO_H
> -#define __ASM_ARM_ARCH_IO_H
> -
> -/* No current ISA/PCI bus support. */
> -#define __io(a) __typesafe_io(a)
> -#define __mem_pci(a) (a)
> -
> -#define IO_SPACE_LIMIT (0xFFFFFFFF)
> -
> -#endif
> diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h
> deleted file mode 100644
> index 83ce2a7..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/irqs.h
> +++ /dev/null
> @@ -1,117 +0,0 @@
> -/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h
> - *
> - * Copyright (c) 2003-2005 Simtec Electronics
> - * Ben Dooks <ben at simtec.co.uk>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -
> -#ifndef __ASM_ARCH_24A0_IRQS_H
> -#define __ASM_ARCH_24A0_IRQS_H __FILE__
> -
> -#define IRQ_EINT0t2 S3C2410_IRQ(0) /* 16 */
> -/* for generic entry-macro.S */
> -#define IRQ_EINT0 IRQ_EINT0t2
> -
> -#define IRQ_EINT3t6 S3C2410_IRQ(1)
> -#define IRQ_EINT7t10 S3C2410_IRQ(2)
> -#define IRQ_EINT11t14 S3C2410_IRQ(3)
> -#define IRQ_EINT15t18 S3C2410_IRQ(4) /* 20 */
> -#define IRQ_TICK S3C2410_IRQ(5)
> -#define IRQ_DCTQ S3C2410_IRQ(6)
> -#define IRQ_MC S3C2410_IRQ(7)
> -#define IRQ_ME S3C2410_IRQ(8) /* 24 */
> -#define IRQ_KEYPAD S3C2410_IRQ(9)
> -#define IRQ_TIMER0 S3C2410_IRQ(10)
> -#define IRQ_TIMER1 S3C2410_IRQ(11)
> -#define IRQ_TIMER2 S3C2410_IRQ(12)
> -#define IRQ_TIMER3_4 S3C2410_IRQ(13)
> -#define IRQ_OS_TIMER IRQ_TIMER3_4
> -#define IRQ_LCD S3C2410_IRQ(14)
> -#define IRQ_CAM_C S3C2410_IRQ(15)
> -#define IRQ_WDT_BATFLT S3C2410_IRQ(16) /* 32 */
> -#define IRQ_UART0 S3C2410_IRQ(17)
> -#define IRQ_CAM_P S3C2410_IRQ(18)
> -#define IRQ_MODEM S3C2410_IRQ(19)
> -#define IRQ_DMA S3C2410_IRQ(20)
> -#define IRQ_SDI S3C2410_IRQ(21)
> -#define IRQ_SPI0 S3C2410_IRQ(22)
> -#define IRQ_UART1 S3C2410_IRQ(23)
> -#define IRQ_AC97_NFLASH S3C2410_IRQ(24) /* 40 */
> -#define IRQ_USBD S3C2410_IRQ(25)
> -#define IRQ_USBH S3C2410_IRQ(26)
> -#define IRQ_IIC S3C2410_IRQ(27)
> -#define IRQ_IRDA_MSTICK S3C2410_IRQ(28) /* 44 */
> -#define IRQ_VLX_SPI1 S3C2410_IRQ(29)
> -#define IRQ_RTC S3C2410_IRQ(30) /* 46 */
> -#define IRQ_ADC_PEN S3C2410_IRQ(31)
> -
> -/* interrupts generated from the external interrupts sources */
> -#define IRQ_EINT00 S3C2410_IRQ(32) /* 48 */
> -#define IRQ_EINT1 S3C2410_IRQ(33)
> -#define IRQ_EINT2 S3C2410_IRQ(34)
> -#define IRQ_EINT3 S3C2410_IRQ(35)
> -#define IRQ_EINT4 S3C2410_IRQ(36)
> -#define IRQ_EINT5 S3C2410_IRQ(37)
> -#define IRQ_EINT6 S3C2410_IRQ(38)
> -#define IRQ_EINT7 S3C2410_IRQ(39)
> -#define IRQ_EINT8 S3C2410_IRQ(40)
> -#define IRQ_EINT9 S3C2410_IRQ(41)
> -#define IRQ_EINT10 S3C2410_IRQ(42)
> -#define IRQ_EINT11 S3C2410_IRQ(43)
> -#define IRQ_EINT12 S3C2410_IRQ(44)
> -#define IRQ_EINT13 S3C2410_IRQ(45)
> -#define IRQ_EINT14 S3C2410_IRQ(46)
> -#define IRQ_EINT15 S3C2410_IRQ(47)
> -#define IRQ_EINT16 S3C2410_IRQ(48)
> -#define IRQ_EINT17 S3C2410_IRQ(49)
> -#define IRQ_EINT18 S3C2410_IRQ(50)
> -
> -#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00)
> -
> -/* SUB IRQS */
> -#define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */
> -#define IRQ_S3CUART_TX0 S3C2410_IRQ(52)
> -#define IRQ_S3CUART_ERR0 S3C2410_IRQ(53)
> -
> -#define IRQ_S3CUART_RX1 S3C2410_IRQ(54)
> -#define IRQ_S3CUART_TX1 S3C2410_IRQ(55)
> -#define IRQ_S3CUART_ERR1 S3C2410_IRQ(56)
> -
> -#define IRQ_S3CUART_RX2 (0x0)
> -#define IRQ_S3CUART_TX2 (0x0)
> -#define IRQ_S3CUART_ERR2 (0x0)
> -
> -
> -#define IRQ_IRDA S3C2410_IRQ(57)
> -#define IRQ_MSTICK S3C2410_IRQ(58)
> -#define IRQ_RESERVED0 S3C2410_IRQ(59)
> -#define IRQ_RESERVED1 S3C2410_IRQ(60)
> -#define IRQ_RESERVED2 S3C2410_IRQ(61)
> -#define IRQ_TIMER3 S3C2410_IRQ(62)
> -#define IRQ_TIMER4 S3C2410_IRQ(63)
> -#define IRQ_WDT S3C2410_IRQ(64)
> -#define IRQ_BATFLT S3C2410_IRQ(65)
> -#define IRQ_POST S3C2410_IRQ(66)
> -#define IRQ_DISP_FIFO S3C2410_IRQ(67)
> -#define IRQ_PENUP S3C2410_IRQ(68)
> -#define IRQ_PENDN S3C2410_IRQ(69)
> -#define IRQ_ADC S3C2410_IRQ(70)
> -#define IRQ_DISP_FRAME S3C2410_IRQ(71)
> -#define IRQ_NFLASH S3C2410_IRQ(72)
> -#define IRQ_AC97 S3C2410_IRQ(73)
> -#define IRQ_SPI1 S3C2410_IRQ(74)
> -#define IRQ_VLX S3C2410_IRQ(75)
> -#define IRQ_DMA0 S3C2410_IRQ(76)
> -#define IRQ_DMA1 S3C2410_IRQ(77)
> -#define IRQ_DMA2 S3C2410_IRQ(78)
> -#define IRQ_DMA3 S3C2410_IRQ(79)
> -
> -#define IRQ_TC (0x0)
> -
> -#define NR_IRQS (IRQ_DMA3+1)
> -
> -#endif /* __ASM_ARCH_24A0_IRQS_H */
> diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
> deleted file mode 100644
> index d88c8b2..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/map.h
> +++ /dev/null
> @@ -1,86 +0,0 @@
> -/* linux/arch/arm/mach-s3c24a0/include/mach/map.h
> - *
> - * Copyright 2003-2007 Simtec Electronics
> - * http://armlinux.simtec.co.uk/
> - * Ben Dooks <ben at simtec.co.uk>
> - *
> - * S3C24A0 - Memory map definitions
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#ifndef __ASM_ARCH_24A0_MAP_H
> -#define __ASM_ARCH_24A0_MAP_H __FILE__
> -
> -#include <plat/map-base.h>
> -#include <plat/map.h>
> -
> -#define S3C24A0_PA_IO_BASE (0x40000000)
> -#define S3C24A0_PA_CLKPWR (0x40000000)
> -#define S3C24A0_PA_IRQ (0x40200000)
> -#define S3C24A0_PA_DMA (0x40400000)
> -#define S3C24A0_PA_MEMCTRL (0x40C00000)
> -#define S3C24A0_PA_NAND (0x40C00000)
> -#define S3C24A0_PA_SROM (0x40C20000)
> -#define S3C24A0_PA_SDRAM (0x40C40000)
> -#define S3C24A0_PA_BUSM (0x40CE0000)
> -#define S3C24A0_PA_USBHOST (0x41000000)
> -#define S3C24A0_PA_MODEMIF (0x41180000)
> -#define S3C24A0_PA_IRDA (0x41800000)
> -#define S3C24A0_PA_TIMER (0x44000000)
> -#define S3C24A0_PA_WATCHDOG (0x44100000)
> -#define S3C24A0_PA_RTC (0x44200000)
> -#define S3C24A0_PA_UART (0x44400000)
> -#define S3C24A0_PA_UART0 (S3C24A0_PA_UART)
> -#define S3C24A0_PA_UART1 (S3C24A0_PA_UART + 0x4000)
> -#define S3C24A0_PA_SPI (0x44500000)
> -#define S3C24A0_PA_IIC (0x44600000)
> -#define S3C24A0_PA_IIS (0x44700000)
> -#define S3C24A0_PA_GPIO (0x44800000)
> -#define S3C24A0_PA_KEYIF (0x44900000)
> -#define S3C24A0_PA_USBDEV (0x44A00000)
> -#define S3C24A0_PA_AC97 (0x45000000)
> -#define S3C24A0_PA_ADC (0x45800000)
> -#define S3C24A0_PA_SDI (0x46000000)
> -#define S3C24A0_PA_MS (0x46100000)
> -#define S3C24A0_PA_LCD (0x4A000000)
> -#define S3C24A0_PA_VPOST (0x4A100000)
> -
> -/* physical addresses of all the chip-select areas */
> -
> -#define S3C24A0_CS0 (0x00000000)
> -#define S3C24A0_CS1 (0x04000000)
> -#define S3C24A0_CS2 (0x08000000)
> -#define S3C24A0_CS3 (0x0C000000)
> -#define S3C24A0_CS4 (0x10000000)
> -#define S3C24A0_CS5 (0x40000000)
> -
> -#define S3C24A0_SDRAM_PA (S3C24A0_CS4)
> -
> -/* Use a single interface for common resources between S3C24XX cpus */
> -
> -#define S3C24XX_PA_IRQ S3C24A0_PA_IRQ
> -#define S3C24XX_PA_MEMCTRL S3C24A0_PA_MEMCTRL
> -#define S3C24XX_PA_USBHOST S3C24A0_PA_USBHOST
> -#define S3C24XX_PA_DMA S3C24A0_PA_DMA
> -#define S3C24XX_PA_CLKPWR S3C24A0_PA_CLKPWR
> -#define S3C24XX_PA_LCD S3C24A0_PA_LCD
> -#define S3C24XX_PA_UART S3C24A0_PA_UART
> -#define S3C24XX_PA_TIMER S3C24A0_PA_TIMER
> -#define S3C24XX_PA_USBDEV S3C24A0_PA_USBDEV
> -#define S3C24XX_PA_WATCHDOG S3C24A0_PA_WATCHDOG
> -#define S3C24XX_PA_IIS S3C24A0_PA_IIS
> -#define S3C24XX_PA_GPIO S3C24A0_PA_GPIO
> -#define S3C24XX_PA_RTC S3C24A0_PA_RTC
> -#define S3C24XX_PA_ADC S3C24A0_PA_ADC
> -#define S3C24XX_PA_SPI S3C24A0_PA_SPI
> -#define S3C24XX_PA_SDI S3C24A0_PA_SDI
> -#define S3C24XX_PA_NAND S3C24A0_PA_NAND
> -
> -#define S3C_PA_UART S3C24A0_PA_UART
> -#define S3C_PA_IIC S3C24A0_PA_IIC
> -#define S3C_PA_NAND S3C24XX_PA_NAND
> -
> -#endif /* __ASM_ARCH_24A0_MAP_H */
> diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h
> deleted file mode 100644
> index 7d208a7..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/memory.h
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h
> - * from linux/include/asm-arm/arch-rpc/memory.h
> - *
> - * Copyright (C) 1996,1997,1998 Russell King.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#ifndef __ASM_ARCH_24A0_MEMORY_H
> -#define __ASM_ARCH_24A0_MEMORY_H __FILE__
> -
> -#define PLAT_PHYS_OFFSET UL(0x10000000)
> -
> -#define __virt_to_bus(x) __virt_to_phys(x)
> -#define __bus_to_virt(x) __phys_to_virt(x)
> -#define __pfn_to_bus(x) __pfn_to_phys(x)
> -#define __bus_to_pfn(x) __phys_to_pfn(x)
> -
> -#endif
> diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
> deleted file mode 100644
> index be0af51..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
> - *
> - * Copyright (c) 2003-2006 Simtec Electronics <linux at simtec.co.uk>
> - * http://armlinux.simtec.co.uk/
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> - * S3C24A0 clock register definitions
> -*/
> -
> -#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H
> -#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__
> -
> -#define S3C24A0_MPLLCON S3C2410_CLKREG(0x10)
> -#define S3C24A0_UPLLCON S3C2410_CLKREG(0x14)
> -#define S3C24A0_CLKCON S3C2410_CLKREG(0x20)
> -#define S3C24A0_CLKSRC S3C2410_CLKREG(0x24)
> -#define S3C24A0_CLKDIVN S3C2410_CLKREG(0x28)
> -
> -/* CLKCON register bits */
> -
> -#define S3C24A0_CLKCON_VLX (1<<29)
> -#define S3C24A0_CLKCON_VPOST (1<<28)
> -#define S3C24A0_CLKCON_WDT (1<<27) /* reserved */
> -#define S3C24A0_CLKCON_MPEGDCTQ (1<<26)
> -#define S3C24A0_CLKCON_VPOSTIF (1<<25)
> -#define S3C24A0_CLKCON_MPEG4IF (1<<24)
> -#define S3C24A0_CLKCON_CAM_UPLL (1<<23)
> -#define S3C24A0_CLKCON_LCDC (1<<22)
> -#define S3C24A0_CLKCON_CAM_HCLK (1<<21)
> -#define S3C24A0_CLKCON_MPEG4 (1<<20)
> -#define S3C24A0_CLKCON_KEYPAD (1<<19)
> -#define S3C24A0_CLKCON_ADC (1<<18)
> -#define S3C24A0_CLKCON_SDI (1<<17)
> -#define S3C24A0_CLKCON_MS (1<<16) /* memory stick */
> -#define S3C24A0_CLKCON_USBD (1<<15)
> -#define S3C24A0_CLKCON_GPIO (1<<14)
> -#define S3C24A0_CLKCON_IIS (1<<13)
> -#define S3C24A0_CLKCON_IIC (1<<12)
> -#define S3C24A0_CLKCON_SPI (1<<11)
> -#define S3C24A0_CLKCON_UART1 (1<<10)
> -#define S3C24A0_CLKCON_UART0 (1<<9)
> -#define S3C24A0_CLKCON_PWMT (1<<8)
> -#define S3C24A0_CLKCON_USBH (1<<7)
> -#define S3C24A0_CLKCON_AC97 (1<<6)
> -#define S3C24A0_CLKCON_IrDA (1<<4)
> -#define S3C24A0_CLKCON_IDLE (1<<2)
> -#define S3C24A0_CLKCON_MON (1<<1)
> -#define S3C24A0_CLKCON_STOP (1<<0)
> -
> -/* CLKSRC register bits */
> -
> -#define S3C24A0_CLKSRC_OSC (1<<8) /* CLKSRC */
> -#define S3C24A0_CLKSRC_UPLL (1<<7)
> -#define S3C24A0_CLKSRC_MPLL (1<<5)
> -#define S3C24A0_CLKSRC_EXT (1<<4)
> -
> -/* Use a single interface with the common code, for s3c24xx */
> -
> -#define S3C2410_MPLLCON S3C24A0_MPLLCON
> -#define S3C2410_UPLLCON S3C24A0_UPLLCON
> -#define S3C2410_CLKCON S3C24A0_CLKCON
> -#define S3C2410_CLKSLOW S3C24A0_CLKSRC
> -#define S3C2410_CLKDIVN S3C24A0_CLKDIVN
> -
> -#define S3C2410_CLKCON_IDLE S3C24A0_CLKCON_IDLE
> -#define S3C2410_CLKCON_POWER S3C24A0_CLKCON_STOP
> -#define S3C2410_CLKCON_LCDC S3C24A0_CLKCON_LCDC
> -#define S3C2410_CLKCON_USBH S3C24A0_CLKCON_USBH
> -#define S3C2410_CLKCON_USBD S3C24A0_CLKCON_USBD
> -#define S3C2410_CLKCON_PWMT S3C24A0_CLKCON_PWMT
> -#define S3C2410_CLKCON_SDI S3C24A0_CLKCON_SDI
> -#define S3C2410_CLKCON_UART0 S3C24A0_CLKCON_UART0
> -#define S3C2410_CLKCON_UART1 S3C24A0_CLKCON_UART1
> -#define S3C2410_CLKCON_GPIO S3C24A0_CLKCON_GPIO
> -#define S3C2410_CLKCON_ADC S3C24A0_CLKCON_ADC
> -#define S3C2410_CLKCON_IIC S3C24A0_CLKCON_IIC
> -#define S3C2410_CLKCON_IIS S3C24A0_CLKCON_IIS
> -#define S3C2410_CLKCON_SPI S3C24A0_CLKCON_SPI
> -
> -#define S3C2410_CLKSLOW_UCLK_OFF S3C24A0_CLKSRC_UPLL
> -#define S3C2410_CLKSLOW_MPLL_OFF S3C24A0_CLKSRC_MPLL
> -#define S3C2410_CLKSLOW_SLOW (0xFF)
> -#define S3C2410_CLKSLOW_GET_SLOWVAL(x) (0x1)
> -
> -#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */
> diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
> deleted file mode 100644
> index 6086f6f..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
> - *
> - * Copyright (c) 2003 Simtec Electronics <linux at simtec.co.uk>
> - * http://www.simtec.co.uk/products/SWLINUX/
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -
> -#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H
> -#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__
> -
> -
> -#define S3C2410_EINTMASK S3C2410_EINTREG(0x034)
> -#define S3C2410_EINTPEND S3C2410_EINTREG(0X038)
> -
> -#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x034)
> -#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X038)
> -
> -#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */
> -
> -
> -
> diff --git a/arch/arm/mach-s3c24a0/include/mach/system.h b/arch/arm/mach-s3c24a0/include/mach/system.h
> deleted file mode 100644
> index bd1bd19..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/system.h
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -/* linux/arch/arm/mach-s3c24a0/include/mach/system.h
> - *
> - * Copyright 2008 Simtec Electronics
> - * Ben Dooks <ben at simtec.co.uk>
> - *
> - * S3C24A0 - System function defines and includes
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <mach/hardware.h>
> -#include <asm/io.h>
> -
> -#include <mach/map.h>
> -
> -static void arch_idle(void)
> -{
> - /* currently no specific idle support. */
> -}
> -
> -void (*s3c24xx_reset_hook)(void);
> -
> -#include <asm/plat-s3c24xx/system-reset.h>
> diff --git a/arch/arm/mach-s3c24a0/include/mach/tick.h b/arch/arm/mach-s3c24a0/include/mach/tick.h
> deleted file mode 100644
> index 9dea8ba..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/tick.h
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h
> - *
> - * Copyright 2008 Simtec Electronics
> - * Ben Dooks <ben at simtec.co.uk>
> - * http://armlinux.simtec.co.uk/
> - *
> - * S3C24A0 - timer tick support
> - */
> -
> -#define SUBSRC_TIMER4 (1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0))
> -
> -static inline int s3c24xx_ostimer_pending(void)
> -{
> - return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4;
> -}
> diff --git a/arch/arm/mach-s3c24a0/include/mach/timex.h b/arch/arm/mach-s3c24a0/include/mach/timex.h
> deleted file mode 100644
> index 9857342..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/timex.h
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h
> - *
> - * Copyright (c) 2008 Simtec Electronics
> - * Ben Dooks <ben at simtec.co.uk>
> - *
> - * S3C2410 - time parameters
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#ifndef __ASM_ARCH_TIMEX_H
> -#define __ASM_ARCH_TIMEX_H
> -
> -#define CLOCK_TICK_RATE 12000000
> -
> -#endif /* __ASM_ARCH_TIMEX_H */
> diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
> deleted file mode 100644
> index 6480b15..0000000
> --- a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h
> - *
> - * Copyright 2008 Simtec Electronics <linux at simtec.co.uk>
> -
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> - * S3C24A0 vmalloc definition
> -*/
> -
> -#ifndef __ASM_ARCH_VMALLOC_H
> -#define __ASM_ARCH_VMALLOC_H
> -
> -#define VMALLOC_END 0xF6000000UL
> -
> -#endif /* __ASM_ARCH_VMALLOC_H */
--
Ben Dooks, ben at fluff.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
More information about the linux-arm-kernel
mailing list