[PATCH 1/2] config: omap2+: force fb and dss support as built-in

[Premi, Sanjeev]

> -----Original Message-----
> From: linux-omap-owner at vger.kernel.org 
> [mailto:linux-omap-owner at vger.kernel.org] On Behalf Of Tushar Behera
> Sent: Monday, June 20, 2011 4:16 PM
> To: linux-kernel at vger.kernel.org; 
> linux-arm-kernel at lists.infradead.org; 
> linux-fbdev at vger.kernel.org; linux-omap at vger.kernel.org
> Cc: linux at arm.linux.org.uk; tony at atomide.com; 
> lethal at linux-sh.org; linaro-dev at lists.linaro.org; 
> patches at linaro.org; Nilofer, Samreen
> Subject: [PATCH 1/2] config: omap2+: force fb and dss support 
> as built-in
> 
> In certain board files, there are references to vram related functions
> which are defined in drivers/video/omap2/vram.c. Because of 
> this direct
> dependency, CONFIG_FB_OMAP2 should be a built-in feature.
> 
> As per the current architecture, CONFIG_FB_OMAP2 is dependent on
> CONFIG_OMAP2_DSS. Hence CONFIG_OMAP2_DSS support should also 
> be selected
> by default.
> 
> Cc: Tony Lindgren <tony at atomide.com>
> Cc: Samreen <samreen at ti.com>
> Signed-off-by: Tushar Behera <tushar.behera at linaro.org>
> ---
> arch/arm/mach-omap2/built-in.o: In function `rx51_video_mem_init':
> linux-linaro-2.6.39/arch/arm/mach-omap2/board-rx51-video.c:97:
>  undefined reference to `omap_vram_set_sdram_vram'
> arch/arm/plat-omap/built-in.o: In function `omap_reserve':
> linux-linaro-2.6.39/arch/arm/plat-omap/common.c:66: undefined 
> reference to `omap_vram_reserve_sdram_memblock'
> arch/arm/plat-omap/built-in.o: In function `omap_detect_sram':
> linux-linaro-2.6.39/arch/arm/plat-omap/sram.c:179: undefined 
> reference to `omap_vram_reserve_sram'
> make[1]: *** [.tmp_vmlinux1] Error 1
> make: *** [sub-make] Error 2
> 
>  arch/arm/configs/omap2plus_defconfig |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/configs/omap2plus_defconfig 
> b/arch/arm/configs/omap2plus_defconfig
> index d5f00d7..c3ffff2 100644
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
> @@ -138,11 +138,11 @@ CONFIG_FIRMWARE_EDID=y
>  CONFIG_FB_MODE_HELPERS=y
>  CONFIG_FB_TILEBLITTING=y
>  CONFIG_FB_OMAP_LCD_VGA=y
> -CONFIG_OMAP2_DSS=m
> +CONFIG_OMAP2_DSS=y
>  CONFIG_OMAP2_DSS_RFBI=y
>  CONFIG_OMAP2_DSS_SDI=y
>  CONFIG_OMAP2_DSS_DSI=y
> -CONFIG_FB_OMAP2=m
> +CONFIG_FB_OMAP2=y
>  CONFIG_PANEL_GENERIC_DPI=m
>  CONFIG_PANEL_SHARP_LS037V7DW01=m
>  CONFIG_PANEL_NEC_NL8048HL11_01B=m


[sp] Instead of changing the omap2plus_defconfig, shouldn't the
     board specific file be fixed instead?

~sanjeev

> -- 
> 1.7.4.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe 
> linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>