[PATCH 1/2] config: omap2+: force fb and dss support as built-in

[Tushar Behera]

In certain board files, there are references to vram related functions
which are defined in drivers/video/omap2/vram.c. Because of this direct
dependency, CONFIG_FB_OMAP2 should be a built-in feature.

As per the current architecture, CONFIG_FB_OMAP2 is dependent on
CONFIG_OMAP2_DSS. Hence CONFIG_OMAP2_DSS support should also be selected
by default.

Cc: Tony Lindgren <tony at atomide.com>
Cc: Samreen <samreen at ti.com>
Signed-off-by: Tushar Behera <tushar.behera at linaro.org>
---
arch/arm/mach-omap2/built-in.o: In function `rx51_video_mem_init':
linux-linaro-2.6.39/arch/arm/mach-omap2/board-rx51-video.c:97: undefined reference to `omap_vram_set_sdram_vram'
arch/arm/plat-omap/built-in.o: In function `omap_reserve':
linux-linaro-2.6.39/arch/arm/plat-omap/common.c:66: undefined reference to `omap_vram_reserve_sdram_memblock'
arch/arm/plat-omap/built-in.o: In function `omap_detect_sram':
linux-linaro-2.6.39/arch/arm/plat-omap/sram.c:179: undefined reference to `omap_vram_reserve_sram'
make[1]: *** [.tmp_vmlinux1] Error 1
make: *** [sub-make] Error 2

 arch/arm/configs/omap2plus_defconfig |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index d5f00d7..c3ffff2 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -138,11 +138,11 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_OMAP_LCD_VGA=y
-CONFIG_OMAP2_DSS=m
+CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_DSS_RFBI=y
 CONFIG_OMAP2_DSS_SDI=y
 CONFIG_OMAP2_DSS_DSI=y
-CONFIG_FB_OMAP2=m
+CONFIG_FB_OMAP2=y
 CONFIG_PANEL_GENERIC_DPI=m
 CONFIG_PANEL_SHARP_LS037V7DW01=m
 CONFIG_PANEL_NEC_NL8048HL11_01B=m
-- 
1.7.4.1