[PATCH] INPUT:Add ABS_PRESSURE input event support for touchscreen driver

[Joonyoung Shim]

On 2011-06-24 오전 11:15, Wu DaoGuang wrote:
> The touchscreen driver s3c2410_ts.c doesn't work well when using
> the tslib, an abstraction layer for touchscreen panel events.
> Tslib needs ABS_X ABS_Y and ABS_PRESSURE events to report, but only
> the former two the driver can provide.
>
> So this patch fixes the problem.
>
> Signed-off-by: Wu DaoGuang<wdgvip at gmail.com>
> ---
>   drivers/input/touchscreen/s3c2410_ts.c |    4 +++-
>   1 files changed, 3 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
> index 8feb7f3..0cf4f12 100644
> --- a/drivers/input/touchscreen/s3c2410_ts.c
> +++ b/drivers/input/touchscreen/s3c2410_ts.c
> @@ -126,6 +126,7 @@ static void touch_timer_fire(unsigned long data)
>   			input_report_abs(ts.input, ABS_Y, ts.yp);
>
>   			input_report_key(ts.input, BTN_TOUCH, 1);
> +			input_report_abs(ts.input, ABS_PRESSURE, 1);
>   			input_sync(ts.input);
>
>   			ts.xp = 0;
> @@ -140,6 +141,7 @@ static void touch_timer_fire(unsigned long data)
>   		ts.count = 0;
>
>   		input_report_key(ts.input, BTN_TOUCH, 0);
> +		input_report_abs(ts.input, ABS_PRESSURE, 0);
>   		input_sync(ts.input);
>
>   		writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
> @@ -318,7 +320,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev)
>   	ts.input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
>   	input_set_abs_params(ts.input, ABS_X, 0, 0x3FF, 0, 0);
>   	input_set_abs_params(ts.input, ABS_Y, 0, 0x3FF, 0, 0);
> -
> +	input_set_abs_params(ts.input, ABS_PRESSURE, 0, 1, 0, 0);
>   	ts.input->name = "S3C24XX TouchScreen";
>   	ts.input->id.bustype = BUS_HOST;
>   	ts.input->id.vendor = 0xDEAD;

This is already NAKed patch.

Please refer https://lkml.org/lkml/2010/11/9/270

Thanks.