[PATCH 1/4] This patch adds ok2440 development board support.
Vasily Khoruzhick
anarsoul at gmail.com
Thu Jun 9 02:54:02 EDT 2011
On Thursday 09 June 2011 04:03:19 Wu DaoGuang wrote:
> The ok2440 development board is based on SAMSUNG's S3C2440
> microprocessor,which is developed with ARM920T core.
>
> The file is modified from arch/arm/mach-s3c2440/mach-smdk2440.c
> that maintained by Ben Dooks <ben at simtec.co.uk>
> I modified it to fit the ok2440 development board.
>
> The following patches are against v3.0-rc2.
>
> Signed-off-by: Wu DaoGuang <wdgvip at gmail.com>
> ---
> arch/arm/mach-s3c2440/mach-ok2440.c | 404
> +++++++++++++++++++++++++++++++++++ 1 files changed, 404 insertions(+), 0
> deletions(-)
> create mode 100755 arch/arm/mach-s3c2440/mach-ok2440.c
>
> diff --git a/arch/arm/mach-s3c2440/mach-ok2440.c
> b/arch/arm/mach-s3c2440/mach-ok2440.c new file mode 100755
Do not set execute permissions for source files
> index 0000000..8c858f1
> --- /dev/null
> +++ b/arch/arm/mach-s3c2440/mach-ok2440.c
> @@ -0,0 +1,404 @@
> +/* linux/arch/arm/mach-s3c2440/mach-ok2440.c
> + *
> + * Copyright (c) 2011 Feiling Embedded
> + * Base on mach-smdk2440.c by Ben Dooks <ben at simtec.co.uk>
> + *
> + * Wu DaoGuang <wdgvip at gmail.com>
> + *
> + * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/list.h>
> +#include <linux/timer.h>
> +#include <linux/init.h>
> +#include <linux/serial_core.h>
> +#include <linux/platform_device.h>
> +#include <linux/input.h>
> +#include <linux/io.h>
> +#include <linux/dm9000.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c/at24.h>
> +#include <linux/mmc/host.h>
> +#include <linux/clk.h>
> +#include <linux/syscore_ops.h>
> +
> +#include <linux/gpio.h>
> +#include <linux/gpio_keys.h>
> +
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/nand.h>
> +#include <linux/mtd/nand_ecc.h>
> +#include <linux/mtd/partitions.h>
> +
> +
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +#include <asm/mach/irq.h>
> +
> +#include <mach/hardware.h>
> +#include <asm/irq.h>
> +#include <asm/sizes.h>
> +
> +#include <asm/mach-types.h>
> +
> +#include <plat/regs-serial.h>
> +#include <plat/nand.h>
> +#include <plat/iic.h>
> +#include <plat/udc.h>
> +#include <plat/mci.h>
> +
> +#include <mach/regs-gpio.h>
> +#include <mach/leds-gpio.h>
> +#include <mach/regs-lcd.h>
> +#include <mach/regs-mem.h>
> +#include <mach/irqs.h>
> +
> +
> +#include <mach/idle.h>
> +#include <mach/fb.h>
> +#include <plat/gpio-core.h>
> +#include <plat/gpio-cfg-helpers.h>
> +#include <plat/gpio-cfg.h>
> +#include <plat/usb-control.h>
> +
> +#include <plat/s3c2410.h>
> +#include <plat/s3c244x.h>
> +#include <plat/clock.h>
> +#include <plat/devs.h>
> +#include <plat/cpu.h>
> +#include <plat/pm.h>
> +
> +#include <plat/common-smdk.h>
> +#include <sound/s3c24xx_uda134x.h>
> +
> +#define MACH_OK2440_DM9K_BASE (S3C2410_CS4 + 0x300)
> +
> +static struct map_desc ok2440_iodesc[] __initdata = {
> + /* ISA IO Space map (memory space selected by A24) */
> +
> + {
> + .virtual = (u32)S3C24XX_VA_ISA_WORD,
> + .pfn = __phys_to_pfn(S3C2410_CS2),
> + .length = 0x10000,
> + .type = MT_DEVICE,
> + }, {
> + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
> + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
> + .length = SZ_4M,
> + .type = MT_DEVICE,
> + }, {
> + .virtual = (u32)S3C24XX_VA_ISA_BYTE,
> + .pfn = __phys_to_pfn(S3C2410_CS2),
> + .length = 0x10000,
> + .type = MT_DEVICE,
> + }, {
> + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
> + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
> + .length = SZ_4M,
> + .type = MT_DEVICE,
> + }
> +};
> +
> +#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
> +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
> +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
> +
> +static struct s3c2410_uartcfg ok2440_uartcfgs[] __initdata = {
> + [0] = {
> + .hwport = 0,
> + .flags = 0,
> + .ucon = 0x3c5,
> + .ulcon = 0x03,
> + .ufcon = 0x51,
> + },
> + [1] = {
> + .hwport = 1,
> + .flags = 0,
> + .ucon = 0x3c5,
> + .ulcon = 0x03,
> + .ufcon = 0x51,
> + },
> + /* IR port */
> + [2] = {
> + .hwport = 2,
> + .flags = 0,
> + .ucon = 0x3c5,
> + .ulcon = 0x43,
> + .ufcon = 0x51,
> + }
> +};
> +
> +/* LCD driver info */
> +
> +static struct s3c2410fb_display ok2440_lcd_cfg __initdata = {
> +
> + .lcdcon5 = S3C2410_LCDCON5_FRM565 |
> + S3C2410_LCDCON5_INVVLINE |
> + S3C2410_LCDCON5_INVVFRAME |
> + S3C2410_LCDCON5_PWREN |
> + S3C2410_LCDCON5_HWSWP,
> +
> + .type = S3C2410_LCDCON1_TFT,
> +
> + .width = 320,
> + .height = 240,
> +
> + .pixclock = 270000, /* HCLK 60 MHz, divisor 10 */
> + .xres = 320,
> + .yres = 240,
> + .bpp = 16,
> + .left_margin = 8,
> + .right_margin = 5,
> + .hsync_len = 16,
> + .upper_margin = 8,
> + .lower_margin = 5,
> + .vsync_len = 2,
> +};
> +
> +static struct s3c2410fb_mach_info ok2440_fb_info __initdata = {
> + .displays = &ok2440_lcd_cfg,
> + .num_displays = 1,
> + .default_display = 0,
> +
> +#if 0
> + /* currently setup by downloader */
> + .gpccon = 0xaa940659,
> + .gpccon_mask = 0xffffffff,
> + .gpcup = 0x0000ffff,
> + .gpcup_mask = 0xffffffff,
> + .gpdcon = 0xaa84aaa0,
> + .gpdcon_mask = 0xffffffff,
> + .gpdup = 0x0000faff,
> + .gpdup_mask = 0xffffffff,
> +#endif
This dead code is not necessary.
> + .lpcsel = ((0xCE6) & ~7) | 1<<4,
> +};
> +
> +/* Nand flash partitions on ok2440 */
> +static struct mtd_partition ok2440_default_nand_part[] = {
> + [0] = {
> + .name = "u-boot",
> + .size = SZ_1M,
> + .offset = 0,
> + },
> + [1] = {
> + .name = "App",
> + .size = SZ_2M,
> + .offset = SZ_1M,
Use MTDPART_OFS_APPEND instead of calculating offset manually (same for other
partitions)
> + },
> + [2] = {
> + .name = "Kernel",
> + .size = SZ_1M*4,
> + .offset = SZ_1M*3,
> + },
> + [3] = {
> + .name = "Ramdisk",
> + .size = SZ_16M,
> + .offset = SZ_1M*7,
> + },
> + [3] = {
> + .name = "Rootfs",
> + .size = MTDPART_SIZ_FULL,
> + .offset = SZ_1M*23,
> + },
> +};
> +static struct s3c2410_nand_set ok2440_nand_sets[] = {
> + [0] = {
> + .name = "nand",
> + .nr_chips = 1,
> + .nr_partitions = ARRAY_SIZE(ok2440_default_nand_part),
> + .partitions = ok2440_default_nand_part,
> + .flash_bbt = 1, /* We use u-boot to creat a BBT*/
> + }
> +};
> +
> +static struct s3c2410_platform_nand ok2440_nand_info __initdata = {
> + .tacls = 20,
> + .twrph0 = 60,
> + .twrph1 = 20,
> + .nr_sets = ARRAY_SIZE(ok2440_nand_sets),
> + .sets = ok2440_nand_sets,
> + .ignore_unset_ecc = 1,
> +};
> +
> +
> +/* DM9000AEP 10/100 ethernet controller */
> +static struct resource ok2440_dm9k_resource[] = {
> + [0] = {
> + .start = MACH_OK2440_DM9K_BASE,
> + .end = MACH_OK2440_DM9K_BASE + 3,
> + .flags = IORESOURCE_MEM
> + },
> + [1] = {
> + .start = MACH_OK2440_DM9K_BASE + 4,
> + .end = MACH_OK2440_DM9K_BASE + 7,
> + .flags = IORESOURCE_MEM
> + },
> + [2] = {
> + .start = IRQ_EINT7,
> + .end = IRQ_EINT7,
> + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
> + }
> +};
> +/* The DM9000 has no eeprom ,and it's MAC address is set by
> + * the bootloader before starting the kernel.
> + */
> +static struct dm9000_plat_data ok2440_dm9k_pdata = {
> + .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
> +};
> +static struct platform_device ok2440_device_eth = {
> + .name = "dm9000",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(ok2440_dm9k_resource),
> + .resource = ok2440_dm9k_resource,
> + .dev = {
> + .platform_data = &ok2440_dm9k_pdata,
> + },
> +};
> +
> +/* LEDS sourport */
> +static struct s3c24xx_led_platdata ok2440_led0_pdata = {
> + .name = "led0",
> + .gpio = S3C2410_GPF(5),
> + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
> + .def_trigger = "heartbeat",
> +};
Please, use leds-gpio driver instead of s3c24xx_led
> +static struct platform_device ok2440_led0 = {
> + .name = "s3c24xx_led",
> + .id = 0,
> + .dev = {
> + .platform_data = &ok2440_led0_pdata,
> + }
> +};
> +
> +/* AUDIO */
> +static struct s3c24xx_uda134x_platform_data ok2440_audio_pins = {
> + .l3_clk = S3C2410_GPB(4),
> + .l3_mode = S3C2410_GPB(2),
> + .l3_data = S3C2410_GPB(3),
> + .model = UDA134X_UDA1341
> +};
> +
> +static struct platform_device ok2440_audio = {
> + .name = "s3c24xx_uda134x",
> + .id = 0,
> + .dev = {
> + .platform_data = &ok2440_audio_pins,
> + }
> +};
> +
> +static struct platform_device uda1340_codec = {
> + .name = "uda134x-codec",
> + .id = -1,
> +};
> +
> +/*
> + * I2C devices
> + */
> +static struct at24_platform_data at24c08 = {
> + .byte_len = SZ_8K / 8,
> + .page_size = 16,
> +};
> +
> +static struct i2c_board_info ok2440_i2c_devs[] __initdata = {
> + {
> + I2C_BOARD_INFO("24c08", 0x50),
> + .platform_data = &at24c08,
> + },
> +};
> +
> +/* USB device UDC support */
> +static struct s3c2410_udc_mach_info ok2440_udc_cfg __initdata = {
> + .pullup_pin = S3C2410_GPG(9),
> +};
> +
> +/* USB */
> +static struct s3c2410_hcd_info ok2440_usb_info __initdata = {
> + .port[0] = {
> + .flags = S3C_HCDFLG_USED,
> + },
> + .port[1] = {
> + .flags = 0,
> + },
> +};
> +
> +/* MMC/SD */
> +static struct s3c24xx_mci_pdata ok2440_mmc_cfg __initdata = {
> + .gpio_detect = S3C2410_GPG(10),
> + .gpio_wprotect = S3C2410_GPH(8),
> + .set_power = NULL,
> + .ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34,
> +};
> +
> +
> +struct syscore_ops s3c24xx_irq_syscore_ops = {
> + .suspend = s3c24xx_irq_suspend,
> + .resume = s3c24xx_irq_resume,
> +};
> +
> +static struct platform_device *ok2440_devices[] __initdata = {
> + &s3c_device_ohci,
> + &s3c_device_lcd,
> + &s3c_device_wdt,
> + &s3c_device_i2c0,
> + &s3c_device_iis,
> + &s3c_device_sdi,
> + &s3c_device_nand,
> + &s3c_device_rtc,
> + &s3c_device_usbgadget,
> + &uda1340_codec,
> + &ok2440_device_eth,
> + &ok2440_audio,
> + &ok2440_led0,
> + &samsung_asoc_dma,
> +
> +};
> +
> +static void __init ok2440_map_io(void)
> +{
> + s3c24xx_init_io(ok2440_iodesc, ARRAY_SIZE(ok2440_iodesc));
> + s3c24xx_init_clocks(12000000);
> + s3c24xx_init_uarts(ok2440_uartcfgs, ARRAY_SIZE(ok2440_uartcfgs));
> +}
> +
> +static void __init ok2440_machine_init(void)
> +{
> + s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
> + s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
Don't use deprecated samsung-specific gpio API, use gpiolib instead.
> + /*configure the mmc protect to pull high . */
> + s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
> + s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
> + s3c24xx_fb_set_platdata(&ok2440_fb_info);
> + s3c_i2c0_set_platdata(NULL);
> +
> + s3c_ohci_set_platdata(&ok2440_usb_info);
> +
> + s3c_nand_set_platdata(&ok2440_nand_info);
> + s3c24xx_udc_set_platdata(&ok2440_udc_cfg);
> + s3c24xx_mci_set_platdata(&ok2440_mmc_cfg);
> + i2c_register_board_info(0, ok2440_i2c_devs,
> + ARRAY_SIZE(ok2440_i2c_devs));
> +
> + platform_add_devices(ok2440_devices, ARRAY_SIZE(ok2440_devices));
> + s3c_pm_init();
> +}
> +
> +MACHINE_START(S3C2440, "OK2440 development board.")
> + /* Maintainer: Wu DaoGuang <wdgvip at gmail.com> */
> + .boot_params = S3C2410_SDRAM_PA + 0x100,
> +
> + .init_irq = s3c24xx_init_irq,
> + .map_io = ok2440_map_io,
> + .init_machine = ok2440_machine_init,
> + .timer = &s3c24xx_timer,
> +MACHINE_END
More information about the linux-arm-kernel
mailing list