[PATCH v3 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5
Shawn Guo
shawn.guo at linaro.org
Mon Jun 20 06:38:41 EDT 2011
The card-present polling for sdhci based driver is very expensive
in terms of the impact to system performance. We observe a few
system performance issues from Freescale and Linaro on mx5 platforms,
which have been proved card polling related.
The patch set extends the current sdhci-esdhc-imx card_detect and
write_protect support to cover mx5 platforms, and solves above
performance issues.
Changes since v2:
* Fix the issue reported by Arnaud Patard:
http://article.gmane.org/gmane.linux.ports.arm.kernel/120790
Changes since v1:
* Rebase on today's linux-next
* Take the suggestion from Arnaud Patard to add default pdata in
imx_add_sdhci_esdhc_imx(), to avoid touching every single board
file for the platform_data changes
* Add comment for sdhci.c change
* Change ESDHC_CD(WP)_SIGNAL to ESDHC_CD(WP)_CONTROLLER for a more
descriptive name
* Add missing NONE case handling in esdhc_pltfm_get_ro
* Improve a couple comment wording per suggestion from Wolfram Sang
Shawn Guo (4):
mmc: sdhci: fix interrupt storm from card detection
mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared
mmc: sdhci-esdhc-imx: remove "WP" from flag ESDHC_FLAG_GPIO_FOR_CD_WP
mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 3 +-
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 3 +-
arch/arm/mach-imx/mach-mx25_3ds.c | 2 +
arch/arm/mach-imx/mach-pcm043.c | 2 +
arch/arm/mach-mx5/board-mx51_babbage.c | 14 +-
arch/arm/mach-mx5/board-mx53_loco.c | 4 +
.../plat-mxc/devices/platform-sdhci-esdhc-imx.c | 12 ++
arch/arm/plat-mxc/include/mach/esdhc.h | 25 +++-
drivers/mmc/host/sdhci-esdhc-imx.c | 136 ++++++++++++--------
drivers/mmc/host/sdhci.c | 27 ++++-
10 files changed, 161 insertions(+), 67 deletions(-)
More information about the linux-arm-kernel
mailing list