[PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC

[Alexander Holler]

Am 31.05.2011 12:29, schrieb Tony Lindgren:
> * Alexander Holler<holler at ahsoftware.de>  [110405 06:38]:
>> Without msecure beeing high it isn't possible to set (or start)
>> the RTC.
>>
>> Tested with a BeagleBoard C4.
>
> Adding this into fixes.
>
> Tony
>
>> Signed-off-by: Alexander Holler<holler at ahsoftware.de>
>> ---
>>   arch/arm/mach-omap2/board-omap3beagle.c |    3 +++
>>   1 files changed, 3 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
>> index 46d814a..ebe3a7e 100644
>> --- a/arch/arm/mach-omap2/board-omap3beagle.c
>> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
>> @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void)
>>   	usb_ehci_init(&ehci_pdata);
>>   	omap3beagle_flash_init();
>>
>> +	/* Ensure msecure is mux'd to be able to set the RTC. */
>> +	omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
>> +
>>   	/* Ensure SDRC pins are mux'd for self-refresh */
>>   	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
>>   	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
>> --
>> 1.7.3.4
>>

I've later switched to the following patch which muxes msecure as GPIO 
(the drm-mode isn't explained in the TRM) and also exports the GPIO, so 
root could easily switch it to prevent modifications on the RTC.

(Warning, either my clipboard or the version of Thunderbird I'm 
currently using replaces the tabs with spaces in the pasted patch and 
I'm currently too lazy to search a workaround).

---
  arch/arm/mach-omap2/board-omap3beagle.c |    6 ++++++
  1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c 
b/arch/arm/mach-omap2/board-omap3beagle.c
index 33007fd..24b4417 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -673,6 +673,12 @@ static void __init omap3_beagle_init(void)
         usbhs_init(&usbhs_bdata);
         omap3beagle_flash_init();

+       /* Ensure msecure is high to be able to set the RTC. */
+       omap_mux_init_signal("gpio_22", OMAP_PIN_OFF_OUTPUT_HIGH);
+       gpio_request(22, "msecure");
+       gpio_direction_output(22, true);
+       gpio_export(22, false);
+
         /* Ensure SDRC pins are mux'd for self-refresh */
         omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
         omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-- 
1.7.3.4

Regards,

Alexander Holler