[PATCH v7 09/14] ARM: msm: use remapped PPI interrupts for local timer
Marc Zyngier
marc.zyngier at arm.com
Mon Jun 13 07:21:54 EDT 2011
Use the normal interrupt scheme for the local timers by using
a remapped PPI interrupt.
MSM already had a very similar scheme, though still mixing both
GIC-specific and generic APIs.
Fixes and ideas courtesy of Stephen Boyd.
Cc: David Brown <davidb at codeaurora.org>
Cc: Daniel Walker <dwalker at fifo99.com>
Cc: Bryan Huntsman <bryanh at codeaurora.org>
Reviewed-and-Tested-by: Stephen Boyd <sboyd at codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
arch/arm/mach-msm/Kconfig | 2 +
arch/arm/mach-msm/board-msm8x60.c | 11 ---
arch/arm/mach-msm/include/mach/entry-macro-qgic.S | 73 +--------------------
arch/arm/mach-msm/timer.c | 59 +++++++++--------
4 files changed, 33 insertions(+), 112 deletions(-)
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 1516896..1ea7d6f 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -42,6 +42,7 @@ config ARCH_MSM8X60
&& !MACH_MSM8X60_FFA)
select ARCH_MSM_SCORPIONMP
select ARM_GIC
+ select ARM_GIC_VPPI
select CPU_V7
select MSM_V2_TLMM
select MSM_GPIOMUX
@@ -52,6 +53,7 @@ config ARCH_MSM8960
select ARCH_MSM_SCORPIONMP
select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3)
select ARM_GIC
+ select ARM_GIC_VPPI
select CPU_V7
select MSM_V2_TLMM
select MSM_GPIOMUX
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 98c47ce..990e036 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -42,8 +42,6 @@ static struct platform_device *devices[] __initdata = {
static void __init msm8x60_init_irq(void)
{
- unsigned int i;
-
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
@@ -55,15 +53,6 @@ static void __init msm8x60_init_irq(void)
*/
if (!machine_is_msm8x60_sim())
writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
- /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
- * as they are configured as level, which does not play nice with
- * handle_percpu_irq.
- */
- for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
- if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
- irq_set_handler(i, handle_percpu_irq);
- }
}
static void __init msm8x60_init(void)
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
index 1246715..717076f 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -8,81 +8,10 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Migrated the code from ARM MP port to be more consistent
- * with interrupt processing , the following still holds true
- * however, all interrupts are treated the same regardless of
- * if they are local IPI or PPI
- *
- * Interrupts 0-15 are IPI
- * 16-31 are PPI
- * (16-18 are the timers)
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the
- * highest priority enabled interrupt. We then just need to check
- * whether it is in the valid range for an IRQ (0-1020 inclusive).
- *
- * Base ARM code assumes that the local (private) peripheral interrupts
- * are not valid, we treat them differently, in that the privates are
- * handled like normal shared interrupts with the exception that only
- * one processor can register the interrupt and the handler must be
- * the same for all processors.
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
- 9-0 =int # */
-
- bic \irqnr, \irqstat, #0x1c00 @mask src
- cmp \irqnr, #15
- ldr \tmp, =1021
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #16
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 38b95e9..b2747cc 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -23,6 +23,7 @@
#include <linux/io.h>
#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
#include <mach/msm_iomap.h>
#include <mach/cpu.h>
@@ -67,7 +68,7 @@ enum timer_location {
struct msm_clock {
struct clock_event_device clockevent;
struct clocksource clocksource;
- struct irqaction irq;
+ unsigned int irq;
void __iomem *regbase;
uint32_t freq;
uint32_t shift;
@@ -83,13 +84,10 @@ enum {
static struct msm_clock msm_clocks[];
-static struct clock_event_device *local_clock_event;
static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
- if (smp_processor_id() != 0)
- evt = local_clock_event;
if (evt->event_handler == NULL)
return IRQ_HANDLED;
evt->event_handler(evt);
@@ -140,6 +138,8 @@ static void msm_timer_set_mode(enum clock_event_mode mode,
writel(TIMER_ENABLE_EN, clock->regbase + TIMER_ENABLE);
break;
case CLOCK_EVT_MODE_UNUSED:
+ disable_irq(evt->irq);
+ /* fall through */
case CLOCK_EVT_MODE_SHUTDOWN:
writel(0, clock->regbase + TIMER_ENABLE);
break;
@@ -163,13 +163,7 @@ static struct msm_clock msm_clocks[] = {
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "gp_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[0].clockevent,
- .irq = INT_GP_TIMER_EXP
- },
+ .irq = INT_GP_TIMER_EXP,
.freq = GPT_HZ,
},
[MSM_CLOCK_DGT] = {
@@ -188,13 +182,7 @@ static struct msm_clock msm_clocks[] = {
.mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "dg_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[1].clockevent,
- .irq = INT_DEBUG_TIMER_EXP
- },
+ .irq = INT_DEBUG_TIMER_EXP,
.freq = DGT_HZ >> MSM_DGT_SHIFT,
.shift = MSM_DGT_SHIFT,
}
@@ -253,10 +241,13 @@ static void __init msm_timer_init(void)
printk(KERN_ERR "msm_timer_init: clocksource_register "
"failed for %s\n", cs->name);
- res = setup_irq(clock->irq.irq, &clock->irq);
+ ce->irq = gic_ppi_to_vppi(clock->irq);
+ res = request_irq(ce->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING,
+ ce->name, ce);
if (res)
- printk(KERN_ERR "msm_timer_init: setup_irq "
- "failed for %s\n", cs->name);
+ pr_err("msm_timer_init: request_irq failed for %s\n",
+ ce->name);
clockevents_register_device(ce);
}
@@ -265,7 +256,9 @@ static void __init msm_timer_init(void)
#ifdef CONFIG_SMP
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
+ static bool local_timer_inited;
struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER];
+ int res;
/* Use existing clock_event for cpu 0 */
if (!smp_processor_id())
@@ -273,12 +266,7 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
- if (!local_clock_event) {
- writel(0, clock->regbase + TIMER_ENABLE);
- writel(0, clock->regbase + TIMER_CLEAR);
- writel(~0, clock->regbase + TIMER_MATCH_VAL);
- }
- evt->irq = clock->irq.irq;
+ evt->irq = gic_ppi_to_vppi(clock->irq);
evt->name = "local_timer";
evt->features = CLOCK_EVT_FEAT_ONESHOT;
evt->rating = clock->clockevent.rating;
@@ -290,9 +278,22 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
clockevent_delta2ns(0xf0000000 >> clock->shift, evt);
evt->min_delta_ns = clockevent_delta2ns(4, evt);
- local_clock_event = evt;
+ if (!local_timer_inited) {
+ writel(0, clock->regbase + TIMER_ENABLE);
+ writel(0, clock->regbase + TIMER_CLEAR);
+ writel(~0, clock->regbase + TIMER_MATCH_VAL);
- gic_enable_ppi(clock->irq.irq);
+ res = request_irq(evt->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING,
+ clock->clockevent.name, evt);
+ if (res) {
+ pr_err("local_timer_setup: request_irq failed for %s\n",
+ clock->clockevent.name);
+ return res;
+ }
+ local_timer_inited = true;
+ } else
+ enable_irq(evt->irq);
clockevents_register_device(evt);
return 0;
--
1.7.0.4
More information about the linux-arm-kernel
mailing list