[PATCH v2 1/3] dmaengine: add new dma API for max_segment_number

[Dan Williams]

On Wed, Jun 8, 2011 at 1:41 PM, Russell King - ARM Linux
<linux at arm.linux.org.uk> wrote:
> On Wed, Jun 08, 2011 at 01:05:57PM -0700, Dan Williams wrote:
>> Even if that were the case it would be same situation that the scsi device
>> driver reports maximum parameters, but the subsystem opts for
>> something tighter.  Whether the maximal parameters come from the scsi
>> device or the dma channel is moot.
>
> Except for the small issue that many DMA-engine using devices do not
> have _any_ DMA capabilities of their own, which means they don't have
> anything to put in their own struct device's DMA parameters.  We can't
> go around making up random insane parameters in the hope that they'll
> exceed whatever DMA-engine is being used with the device - that's a
> hack not a solution.

So, I was operating under the assumption that most dmaengine drivers
would ignore this api, it's just useful to the subset of slave-dma
consumers that have apriori knowledge that the best answer for the dma
geometry comes from the channel.  But not sure how we prevent abuse of
this api for cases where a better answer is available from another
source, which I think is what Tomonori-san is worried about.