[PATCH v4 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared

[Shawn Guo]

The function esdhc_readl_le intends to clear bit SDHCI_CARD_PRESENT,
when the card detect gpio tells there is no card.  But it does not
clear the bit actually.  The patch gives a fix on that.

Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
Acked-by: Wolfram Sang <w.sang at pengutronix.de>
Cc: <stable at kernel.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 248b8e5..94097c0 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -84,7 +84,7 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 		if (boarddata && gpio_is_valid(boarddata->cd_gpio)
 				&& gpio_get_value(boarddata->cd_gpio))
 			/* no card, if a valid gpio says so... */
-			val &= SDHCI_CARD_PRESENT;
+			val &= ~SDHCI_CARD_PRESENT;
 		else
 			/* ... in all other cases assume card is present */
 			val |= SDHCI_CARD_PRESENT;
-- 
1.7.4.1