[RFC PATCH v2] Add ARM cpu topology definition
Amit Kucheria
amit.kucheria at linaro.org
Wed Jun 22 06:14:23 EDT 2011
Some nits below.
After you fix them, you can add a
Reviewed-by: Amit Kucheria <amit.kucheria at linaro.org>
On 11 Jun 20, Vincent Guittot wrote:
> The affinity between ARM processors is defined in the MPIDR register.
> We can identify which processors are in the same cluster,
> and which ones have performance interdependency.We can define the
^^ space between full-stop
and next word
> cpu topology of ARM platform, which is used by sched_mc and sched_smt.
^^^^^^^^ change to 'that is then'
> The default state of sched_mc and sched_smt config is disable.
Change to "sched_mc and sched_smt is disabled by default"
> When enable, the behavior of the scheduler can be modified with
^ enabled
> sched_mc_power_savings and sched_smt_power_savings sysfs interfaces.
>
> Changes since v1 :
> * Update the commit message
> * Add read_cpuid_mpidr in arch/arm/include/asm/cputype.h
> * Modify header of arch/arm/kernel/topology.c
> * Modify tests and manipulation of MPIDR's bitfields
> * Modify the place and dependancy of the config
> * Modify Noop functions
>
> Signed-off-by: Vincent Guittot <vincent.guittot at linaro.org>
> ---
> arch/arm/Kconfig | 25 +++++++
> arch/arm/include/asm/cputype.h | 6 ++
> arch/arm/include/asm/topology.h | 33 +++++++++
> arch/arm/kernel/Makefile | 1 +
> arch/arm/kernel/smp.c | 6 ++
> arch/arm/kernel/topology.c | 145 +++++++++++++++++++++++++++++++++++++++
> 6 files changed, 216 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/kernel/topology.c
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 9adc278..c7b4ff9 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1344,6 +1344,31 @@ config SMP_ON_UP
>
> If you don't know what to do here, say Y.
>
> +config ARM_CPU_TOPOLOGY
> + bool "Support cpu topology definition"
> + depends on SMP && CPU_V7
> + default y
> + help
> + Support ARM cpu topology definition. The MPIDR register defines
> + affinity between processors which is used to set the cpu
^^^^^^^^^^^^^^^^^ change to 'which is then
used to describe the'
> + topology of an ARM System.
> +
> +config SCHED_MC
> + bool "Multi-core scheduler support"
> + depends on ARM_CPU_TOPOLOGY
> + help
> + Multi-core scheduler support improves the CPU scheduler's decision
> + making when dealing with multi-core CPU chips at a cost of slightly
> + increased overhead in some places. If unsure say N here.
> +
> +config SCHED_SMT
> + bool "SMT scheduler support"
> + depends on ARM_CPU_TOPOLOGY
> + help
> + Improves the CPU scheduler's decision making when dealing with
> + MultiThreading at a cost of slightly increased overhead in some
> + places. If unsure say N here.
> +
> config HAVE_ARM_SCU
> bool
> depends on SMP
> diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
> index cd4458f..cb47d28 100644
> --- a/arch/arm/include/asm/cputype.h
> +++ b/arch/arm/include/asm/cputype.h
> @@ -8,6 +8,7 @@
> #define CPUID_CACHETYPE 1
> #define CPUID_TCM 2
> #define CPUID_TLBTYPE 3
> +#define CPUID_MPIDR 5
>
> #define CPUID_EXT_PFR0 "c1, 0"
> #define CPUID_EXT_PFR1 "c1, 1"
> @@ -70,6 +71,11 @@ static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
> return read_cpuid(CPUID_TCM);
> }
>
> +static inline unsigned int __attribute_const__ read_cpuid_mpidr(void)
> +{
> + return read_cpuid(CPUID_MPIDR);
> +}
> +
> /*
> * Intel's XScale3 core supports some v6 features (supersections, L2)
> * but advertises itself as v5 as it does not support the v6 ISA. For
> diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
> index accbd7c..63a7454 100644
> --- a/arch/arm/include/asm/topology.h
> +++ b/arch/arm/include/asm/topology.h
> @@ -1,6 +1,39 @@
> #ifndef _ASM_ARM_TOPOLOGY_H
> #define _ASM_ARM_TOPOLOGY_H
>
> +#ifdef CONFIG_ARM_CPU_TOPOLOGY
> +
> +#include <linux/cpumask.h>
> +
> +struct cputopo_arm {
> + int thread_id;
> + int core_id;
> + int socket_id;
> + cpumask_t thread_sibling;
> + cpumask_t core_sibling;
> +};
> +
> +extern struct cputopo_arm cpu_topology[NR_CPUS];
> +
> +#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id)
> +#define topology_core_id(cpu) (cpu_topology[cpu].core_id)
> +#define topology_core_cpumask(cpu) (&(cpu_topology[cpu].core_sibling))
> +#define topology_thread_cpumask(cpu) (&(cpu_topology[cpu].thread_sibling))
These #defines are not used anywhere.
> +#define mc_capable() (cpu_topology[0].socket_id != -1)
> +#define smt_capable() (cpu_topology[0].thread_id != -1)
Neither are these.
> +void init_cpu_topology(void);
> +void store_cpu_topology(unsigned int cpuid);
> +const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
> +
> +#else
> +
> +static inline void init_cpu_topology(void) { };
> +static inline void store_cpu_topology(unsigned int cpuid) { };
> +
> +#endif
> +
> #include <asm-generic/topology.h>
>
> #endif /* _ASM_ARM_TOPOLOGY_H */
> diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
> index a5b31af..816a481 100644
> --- a/arch/arm/kernel/Makefile
> +++ b/arch/arm/kernel/Makefile
> @@ -61,6 +61,7 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o
> obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
> obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
> AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
> +obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
>
> ifneq ($(CONFIG_ARCH_EBSA110),y)
> obj-y += io.o
> diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
> index 344e52b..3e8dc3b 100644
> --- a/arch/arm/kernel/smp.c
> +++ b/arch/arm/kernel/smp.c
> @@ -31,6 +31,7 @@
> #include <asm/cacheflush.h>
> #include <asm/cpu.h>
> #include <asm/cputype.h>
> +#include <asm/topology.h>
> #include <asm/mmu_context.h>
> #include <asm/pgtable.h>
> #include <asm/pgalloc.h>
> @@ -268,6 +269,9 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
> struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
>
> cpu_info->loops_per_jiffy = loops_per_jiffy;
> +
> + store_cpu_topology(cpuid);
> +
> }
>
> /*
> @@ -354,6 +358,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
> {
> unsigned int ncores = num_possible_cpus();
>
> + init_cpu_topology();
> +
> smp_store_cpu_info(smp_processor_id());
>
> /*
> diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
> new file mode 100644
> index 0000000..dc9e4be
> --- /dev/null
> +++ b/arch/arm/kernel/topology.c
> @@ -0,0 +1,145 @@
> +/*
> + * arch/arm/kernel/topology.c
> + *
> + * Copyright (C) 2011 Linaro Limited.
> + * Written by: Vincent Guittot
> + *
> + * based on arch/sh/kernel/topology.c
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + */
> +
> +#include <linux/cpu.h>
> +#include <linux/cpumask.h>
> +#include <linux/init.h>
> +#include <linux/percpu.h>
> +#include <linux/node.h>
> +#include <linux/nodemask.h>
> +#include <linux/sched.h>
> +
> +#include <asm/cputype.h>
> +#include <asm/topology.h>
> +
> +#define MPIDR_SMP_BITMASK (0x3 << 30)
> +#define MPIDR_SMP_VALUE (0x2 << 30)
> +
> +#define MPIDR_MT_BITMASK (0x1 << 24)
> +
> +#define MPIDR_LEVEL0_MASK 0x3
Perhaps add a comment reflecting the discussion on IRC. For Cortex-A9, only
2 bits are supported for LEVEL0 and 4 bits for LEVEL1. In the future, each of
the LEVELS can use all 8 bits.
> +#define MPIDR_LEVEL0_SHIFT 0
> +
> +#define MPIDR_LEVEL1_MASK 0xF
> +#define MPIDR_LEVEL1_SHIFT 8
> +
> +#define MPIDR_LEVEL2_MASK 0xFF
> +#define MPIDR_LEVEL2_SHIFT 16
> +
> +struct cputopo_arm cpu_topology[NR_CPUS];
> +
> +const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
> +{
> + return &(cpu_topology[cpu].core_sibling);
> +}
> +
> +/*
> + * store_cpu_topology is called at boot when only one cpu is running
> + * and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
> + * which prevents simultaneous write access to cpu_topology array
> + */
> +void store_cpu_topology(unsigned int cpuid)
> +{
> + struct cputopo_arm *cpuid_topo = &(cpu_topology[cpuid]);
> + unsigned int mpidr;
> + unsigned int cpu;
> +
> + /* If the cpu topology has been already set, just return */
> + if (cpuid_topo->core_id != -1)
> + return;
> +
> + mpidr = read_cpuid_mpidr();
> +
> + /* create cpu topology mapping */
> + if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) {
> + /*
> + * This is a multiprocessor system
> + * multiprocessor format & multiprocessor mode field are set
> + */
> +
> + if (mpidr & MPIDR_MT_BITMASK) {
> + /* core performance interdependency */
> + cpuid_topo->thread_id = ((mpidr >> MPIDR_LEVEL0_SHIFT)
> + & MPIDR_LEVEL0_MASK);
> + cpuid_topo->core_id = ((mpidr >> MPIDR_LEVEL1_SHIFT)
> + & MPIDR_LEVEL1_MASK);
> + cpuid_topo->socket_id = ((mpidr >> MPIDR_LEVEL2_SHIFT)
> + & MPIDR_LEVEL2_MASK);
> + } else {
> + /* normal core interdependency */
^^^^^^ Normal or No?
> + cpuid_topo->thread_id = -1;
> + cpuid_topo->core_id = ((mpidr >> MPIDR_LEVEL0_SHIFT)
> + & MPIDR_LEVEL0_MASK);
> + cpuid_topo->socket_id = ((mpidr >> MPIDR_LEVEL1_SHIFT)
> + & MPIDR_LEVEL1_MASK);
> + }
> + } else {
> + /*
> + * This is an uniprocessor system
> + * we are in multiprocessor format but uniprocessor system
> + * or in the old uniprocessor format
> + */
These are 3 different conditions, I think. Separate with commas.
> +
> + cpuid_topo->thread_id = -1;
> + cpuid_topo->core_id = 0;
> + cpuid_topo->socket_id = -1;
> + }
> +
> + /* update core and thread sibling masks */
> + for_each_possible_cpu(cpu) {
> + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
> +
> + if (cpuid_topo->socket_id == cpu_topo->socket_id) {
> + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
> + if (cpu != cpuid)
> + cpumask_set_cpu(cpu,
> + &cpuid_topo->core_sibling);
> +
> + if (cpuid_topo->core_id == cpu_topo->core_id) {
> + cpumask_set_cpu(cpuid,
> + &cpu_topo->thread_sibling);
> + if (cpu != cpuid)
> + cpumask_set_cpu(cpu,
> + &cpuid_topo->thread_sibling);
> + }
> + }
> + }
> + smp_wmb();
> +
> + printk(KERN_INFO "cpu %u : thread %d cpu %d, socket %d, mpidr %x\n",
> + cpuid, cpu_topology[cpuid].thread_id,
> + cpu_topology[cpuid].core_id,
> + cpu_topology[cpuid].socket_id, mpidr);
> +
> +}
> +
> +/*
> + * init_cpu_topology is called at boot when only one cpu is running
> + * which prevent simultaneous write access to cpu_topology array
> + */
> +void init_cpu_topology(void)
> +{
> + unsigned int cpu;
> +
> + /* init core mask */
> + for_each_possible_cpu(cpu) {
> + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
> +
> + cpu_topo->thread_id = -1;
> + cpu_topo->core_id = -1;
> + cpu_topo->socket_id = -1;
> + cpumask_clear(&cpu_topo->core_sibling);
> + cpumask_clear(&cpu_topo->thread_sibling);
> + }
> + smp_wmb();
> +}
> --
> 1.7.4.1
>
More information about the linux-arm-kernel
mailing list