[PATCH v2] ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals

[Sascha Hauer]

On Mon, Jun 20, 2011 at 10:37:13AM -0300, Fabio Estevam wrote:
> Original code was assuming that the CSPI1 pins on the
> MX31PDK were the primary pin function, which is incorrect.
> 
> On MX31PDK board these are the pins that provide CSPI1 functionality:
> 
> DSR_DCE1 (ALT mode 1) --> CSPI1_CLK
> RI_DCE1 (ALT mode 1) --> CSPI1_RDY
> 
> DTR_DTE1  -->CSI1_MOSI
> DSR_DTE1 --> CSPI1_MISO
> DTR_DCE2 ---> CSPI1_SS2
> 
> The 3 IOMUX settings above are done via GPR as per Table A-1 of the MX31RM.
> 
> This patch fixes the CSPI1 IOMUX and makes the LCD to be functional.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Applied to -for-next

Sascha

> ---
> Changes since v1:
> 
> - Provided better explanation about this change on the commit message
> 
>  arch/arm/mach-imx/mach-mx31_3ds.c |   10 +++++-----
>  1 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
> index ab2a626..a6160ee 100644
> --- a/arch/arm/mach-imx/mach-mx31_3ds.c
> +++ b/arch/arm/mach-imx/mach-mx31_3ds.c
> @@ -53,11 +53,8 @@ static int mx31_3ds_pins[] = {
>  	MX31_PIN_RXD1__RXD1,
>  	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
>  	/*SPI0*/
> -	MX31_PIN_CSPI1_SCLK__SCLK,
> -	MX31_PIN_CSPI1_MOSI__MOSI,
> -	MX31_PIN_CSPI1_MISO__MISO,
> -	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
> -	MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
> +	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
> +	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
>  	/* SPI 1 */
>  	MX31_PIN_CSPI2_SCLK__SCLK,
>  	MX31_PIN_CSPI2_MOSI__MOSI,
> @@ -690,6 +687,9 @@ static void __init mx31_3ds_init(void)
>  	int ret;
>  
>  	imx31_soc_init();
> +
> +	/* Configure SPI1 IOMUX */
> +	mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
>  
>  	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
>  				      "mx31_3ds");
> -- 
> 1.6.0.4
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |