[PATCH 4/9] ARM: S3C24XX: Add clkdev support
Thomas Abraham
thomas.ab at samsung.com
Thu Jun 9 00:38:39 EDT 2011
Add clkdev support for Samsung's s3c24xx platforms.
Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-s3c2412/clock.c | 36 ++---------------------------
arch/arm/mach-s3c2416/clock.c | 10 ++++----
arch/arm/mach-s3c2440/clock.c | 3 --
arch/arm/mach-s3c2443/clock.c | 16 +++----------
arch/arm/plat-s3c24xx/clock-dclk.c | 4 ---
arch/arm/plat-s3c24xx/s3c2410-clock.c | 21 ++---------------
arch/arm/plat-s3c24xx/s3c2443-clock.c | 39 +++-----------------------------
arch/arm/plat-samsung/clock.c | 10 --------
arch/arm/plat-samsung/pwm-clock.c | 10 ++++++++
arch/arm/plat-samsung/time.c | 2 +
11 files changed, 32 insertions(+), 120 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2aa4563..11418d9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -687,6 +687,7 @@ config ARCH_S3C2410
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
+ select CLKDEV_LOOKUP
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C if I2C
help
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 0c0505b..140711d 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -95,12 +95,10 @@ static int s3c2412_upll_enable(struct clk *clk, int enable)
static struct clk clk_erefclk = {
.name = "erefclk",
- .id = -1,
};
static struct clk clk_urefclk = {
.name = "urefclk",
- .id = -1,
};
static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
@@ -122,7 +120,6 @@ static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
static struct clk clk_usysclk = {
.name = "usysclk",
- .id = -1,
.parent = &clk_xtal,
.ops = &(struct clk_ops) {
.set_parent = s3c2412_setparent_usysclk,
@@ -132,13 +129,11 @@ static struct clk clk_usysclk = {
static struct clk clk_mrefclk = {
.name = "mrefclk",
.parent = &clk_xtal,
- .id = -1,
};
static struct clk clk_mdivclk = {
.name = "mdivclk",
.parent = &clk_xtal,
- .id = -1,
};
static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
@@ -200,7 +195,6 @@ static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
static struct clk clk_usbsrc = {
.name = "usbsrc",
- .id = -1,
.ops = &(struct clk_ops) {
.get_rate = s3c2412_getrate_usbsrc,
.set_rate = s3c2412_setrate_usbsrc,
@@ -228,7 +222,6 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
static struct clk clk_msysclk = {
.name = "msysclk",
- .id = -1,
.ops = &(struct clk_ops) {
.set_parent = s3c2412_setparent_msysclk,
},
@@ -268,7 +261,6 @@ static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
static struct clk clk_armclk = {
.name = "armclk",
- .id = -1,
.parent = &clk_msysclk,
.ops = &(struct clk_ops) {
.set_parent = s3c2412_setparent_armclk,
@@ -344,7 +336,6 @@ static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
static struct clk clk_uart = {
.name = "uartclk",
- .id = -1,
.ops = &(struct clk_ops) {
.get_rate = s3c2412_getrate_uart,
.set_rate = s3c2412_setrate_uart,
@@ -397,7 +388,6 @@ static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
static struct clk clk_i2s = {
.name = "i2sclk",
- .id = -1,
.ops = &(struct clk_ops) {
.get_rate = s3c2412_getrate_i2s,
.set_rate = s3c2412_setrate_i2s,
@@ -449,7 +439,6 @@ static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
static struct clk clk_cam = {
.name = "camif-upll", /* same as 2440 name */
- .id = -1,
.ops = &(struct clk_ops) {
.get_rate = s3c2412_getrate_cam,
.set_rate = s3c2412_setrate_cam,
@@ -463,37 +452,31 @@ static struct clk clk_cam = {
static struct clk init_clocks_disable[] = {
{
.name = "nand",
- .id = -1,
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_NAND,
}, {
.name = "sdi",
- .id = -1,
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_SDI,
}, {
.name = "adc",
- .id = -1,
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_ADC,
}, {
.name = "i2c",
- .id = -1,
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_IIC,
}, {
.name = "iis",
- .id = -1,
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_IIS,
}, {
.name = "spi",
- .id = -1,
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_SPI,
@@ -503,96 +486,83 @@ static struct clk init_clocks_disable[] = {
static struct clk init_clocks[] = {
{
.name = "dma",
- .id = 0,
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA0,
}, {
.name = "dma",
- .id = 1,
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA1,
}, {
.name = "dma",
- .id = 2,
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA2,
}, {
.name = "dma",
- .id = 3,
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_DMA3,
}, {
.name = "lcd",
- .id = -1,
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_LCDC,
}, {
.name = "gpio",
- .id = -1,
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_GPIO,
}, {
.name = "usb-host",
- .id = -1,
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_USBH,
}, {
.name = "usb-device",
- .id = -1,
.parent = &clk_h,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_USBD,
}, {
.name = "timers",
- .id = -1,
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_PWMT,
}, {
.name = "uart",
- .id = 0,
+ .devname = "s3c2412-uart.0",
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_UART0,
}, {
.name = "uart",
- .id = 1,
+ .devname = "s3c2412-uart.1",
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_UART1,
}, {
.name = "uart",
- .id = 2,
+ .devname = "s3c2412-uart.2",
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_UART2,
}, {
.name = "rtc",
- .id = -1,
.parent = &clk_p,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_RTC,
}, {
.name = "watchdog",
- .id = -1,
.parent = &clk_p,
.ctrlbit = 0,
}, {
.name = "usb-bus-gadget",
- .id = -1,
.parent = &clk_usb_bus,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_USB_DEV48,
}, {
.name = "usb-bus-host",
- .id = -1,
.parent = &clk_usb_bus,
.enable = s3c2412_clkcon_enable,
.ctrlbit = S3C2412_CLKCON_USB_HOST48,
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 3b02d85..21a5e81 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -42,7 +42,7 @@ static struct clksrc_clk hsmmc_div[] = {
[0] = {
.clk = {
.name = "hsmmc-div",
- .id = 0,
+ .devname = "s3c-sdhci.0",
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
@@ -50,7 +50,7 @@ static struct clksrc_clk hsmmc_div[] = {
[1] = {
.clk = {
.name = "hsmmc-div",
- .id = 1,
+ .devname = "s3c-sdhci.1",
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
@@ -60,8 +60,8 @@ static struct clksrc_clk hsmmc_div[] = {
static struct clksrc_clk hsmmc_mux[] = {
[0] = {
.clk = {
- .id = 0,
.name = "hsmmc-if",
+ .devname = "s3c-sdhci.0",
.ctrlbit = (1 << 6),
.enable = s3c2443_clkcon_enable_s,
},
@@ -76,8 +76,8 @@ static struct clksrc_clk hsmmc_mux[] = {
},
[1] = {
.clk = {
- .id = 1,
.name = "hsmmc-if",
+ .devname = "s3c-sdhci.1",
.ctrlbit = (1 << 12),
.enable = s3c2443_clkcon_enable_s,
},
@@ -94,7 +94,7 @@ static struct clksrc_clk hsmmc_mux[] = {
static struct clk hsmmc0_clk = {
.name = "hsmmc",
- .id = 0,
+ .devname = "s3c-sdhci.0",
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2416_HCLKCON_HSMMC0,
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 3dc2426..554e0d3 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -90,14 +90,12 @@ static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
static struct clk s3c2440_clk_cam = {
.name = "camif",
- .id = -1,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2440_CLKCON_CAMERA,
};
static struct clk s3c2440_clk_cam_upll = {
.name = "camif-upll",
- .id = -1,
.ops = &(struct clk_ops) {
.set_rate = s3c2440_camif_upll_setrate,
.round_rate = s3c2440_camif_upll_round,
@@ -106,7 +104,6 @@ static struct clk s3c2440_clk_cam_upll = {
static struct clk s3c2440_clk_ac97 = {
.name = "ac97",
- .id = -1,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2440_CLKCON_CAMERA,
};
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index f4ec6d5..a1a7176 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -59,7 +59,6 @@
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
- .id = -1,
};
/* armdiv
@@ -139,7 +138,6 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
static struct clk clk_armdiv = {
.name = "armdiv",
- .id = -1,
.parent = &clk_msysclk.clk,
.ops = &(struct clk_ops) {
.round_rate = s3c2443_armclk_roundrate,
@@ -160,7 +158,6 @@ static struct clk *clk_arm_sources[] = {
static struct clksrc_clk clk_arm = {
.clk = {
.name = "armclk",
- .id = -1,
},
.sources = &(struct clksrc_sources) {
.sources = clk_arm_sources,
@@ -177,7 +174,6 @@ static struct clksrc_clk clk_arm = {
static struct clksrc_clk clk_hsspi = {
.clk = {
.name = "hsspi",
- .id = -1,
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_HSSPICLK,
.enable = s3c2443_clkcon_enable_s,
@@ -196,7 +192,7 @@ static struct clksrc_clk clk_hsspi = {
static struct clksrc_clk clk_hsmmc_div = {
.clk = {
.name = "hsmmc-div",
- .id = 1,
+ .devname = "s3c-sdhci.1",
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
@@ -231,7 +227,7 @@ static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
static struct clk clk_hsmmc = {
.name = "hsmmc-if",
- .id = 1,
+ .devname = "s3c-sdhci.1",
.parent = &clk_hsmmc_div.clk,
.enable = s3c2443_enable_hsmmc,
.ops = &(struct clk_ops) {
@@ -248,7 +244,6 @@ static struct clk clk_hsmmc = {
static struct clksrc_clk clk_i2s_eplldiv = {
.clk = {
.name = "i2s-eplldiv",
- .id = -1,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
@@ -271,7 +266,6 @@ struct clk *clk_i2s_srclist[] = {
static struct clksrc_clk clk_i2s = {
.clk = {
.name = "i2s-if",
- .id = -1,
.ctrlbit = S3C2443_SCLKCON_I2SCLK,
.enable = s3c2443_clkcon_enable_s,
@@ -288,25 +282,23 @@ static struct clksrc_clk clk_i2s = {
static struct clk init_clocks_off[] = {
{
.name = "sdi",
- .id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SDI,
}, {
.name = "iis",
- .id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_IIS,
}, {
.name = "spi",
- .id = 0,
+ .devname = "s3c2410-spi.0",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SPI0,
}, {
.name = "spi",
- .id = 1,
+ .devname = "s3c2410-spi.1",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SPI1,
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index cf97caa..f95d326 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -169,7 +169,6 @@ static struct clk_ops dclk_ops = {
struct clk s3c24xx_dclk0 = {
.name = "dclk0",
- .id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
.enable = s3c24xx_dclk_enable,
.ops = &dclk_ops,
@@ -177,7 +176,6 @@ struct clk s3c24xx_dclk0 = {
struct clk s3c24xx_dclk1 = {
.name = "dclk1",
- .id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK1EN,
.enable = s3c24xx_dclk_enable,
.ops = &dclk_ops,
@@ -189,12 +187,10 @@ static struct clk_ops clkout_ops = {
struct clk s3c24xx_clkout0 = {
.name = "clkout0",
- .id = -1,
.ops = &clkout_ops,
};
struct clk s3c24xx_clkout1 = {
.name = "clkout1",
- .id = -1,
.ops = &clkout_ops,
};
diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c
index 9ecc5d9..def76aa 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c
@@ -90,37 +90,31 @@ static int s3c2410_upll_enable(struct clk *clk, int enable)
static struct clk init_clocks_off[] = {
{
.name = "nand",
- .id = -1,
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_NAND,
}, {
.name = "sdi",
- .id = -1,
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_SDI,
}, {
.name = "adc",
- .id = -1,
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_ADC,
}, {
.name = "i2c",
- .id = -1,
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_IIC,
}, {
.name = "iis",
- .id = -1,
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_IIS,
}, {
.name = "spi",
- .id = -1,
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_SPI,
@@ -130,70 +124,61 @@ static struct clk init_clocks_off[] = {
static struct clk init_clocks[] = {
{
.name = "lcd",
- .id = -1,
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_LCDC,
}, {
.name = "gpio",
- .id = -1,
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_GPIO,
}, {
.name = "usb-host",
- .id = -1,
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBH,
}, {
.name = "usb-device",
- .id = -1,
.parent = &clk_h,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBD,
}, {
.name = "timers",
- .id = -1,
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_PWMT,
}, {
.name = "uart",
- .id = 0,
+ .devname = "s3c2410-uart.0",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART0,
}, {
.name = "uart",
- .id = 1,
+ .devname = "s3c2410-uart.1",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART1,
}, {
.name = "uart",
- .id = 2,
+ .devname = "s3c2410-uart.2",
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART2,
}, {
.name = "rtc",
- .id = -1,
.parent = &clk_p,
.enable = s3c2410_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_RTC,
}, {
.name = "watchdog",
- .id = -1,
.parent = &clk_p,
.ctrlbit = 0,
}, {
.name = "usb-bus-host",
- .id = -1,
.parent = &clk_usb_bus,
}, {
.name = "usb-bus-gadget",
- .id = -1,
.parent = &clk_usb_bus,
},
};
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 82f2d4a..59552c0 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -56,7 +56,6 @@ int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
struct clk clk_mpllref = {
.name = "mpllref",
.parent = &clk_xtal,
- .id = -1,
};
static struct clk *clk_epllref_sources[] = {
@@ -69,7 +68,6 @@ static struct clk *clk_epllref_sources[] = {
struct clksrc_clk clk_epllref = {
.clk = {
.name = "epllref",
- .id = -1,
},
.sources = &(struct clksrc_sources) {
.sources = clk_epllref_sources,
@@ -92,7 +90,6 @@ struct clksrc_clk clk_esysclk = {
.clk = {
.name = "esysclk",
.parent = &clk_epll,
- .id = -1,
},
.sources = &(struct clksrc_sources) {
.sources = clk_sysclk_sources,
@@ -115,7 +112,6 @@ static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
static struct clk clk_mdivclk = {
.name = "mdivclk",
.parent = &clk_mpllref,
- .id = -1,
.ops = &(struct clk_ops) {
.get_rate = s3c2443_getrate_mdivclk,
},
@@ -132,7 +128,6 @@ struct clksrc_clk clk_msysclk = {
.clk = {
.name = "msysclk",
.parent = &clk_xtal,
- .id = -1,
},
.sources = &(struct clksrc_sources) {
.sources = clk_msysclk_sources,
@@ -159,7 +154,6 @@ static unsigned long s3c2443_prediv_getrate(struct clk *clk)
static struct clk clk_prediv = {
.name = "prediv",
- .id = -1,
.parent = &clk_msysclk.clk,
.ops = &(struct clk_ops) {
.get_rate = s3c2443_prediv_getrate,
@@ -174,7 +168,6 @@ static struct clk clk_prediv = {
static struct clksrc_clk clk_usb_bus_host = {
.clk = {
.name = "usb-bus-host-parent",
- .id = -1,
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_USBHOST,
.enable = s3c2443_clkcon_enable_s,
@@ -189,7 +182,6 @@ static struct clksrc_clk clksrc_clks[] = {
/* ART baud-rate clock sourced from esysclk via a divisor */
.clk = {
.name = "uartclk",
- .id = -1,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
@@ -197,7 +189,6 @@ static struct clksrc_clk clksrc_clks[] = {
/* camera interface bus-clock, divided down from esysclk */
.clk = {
.name = "camif-upll", /* same as 2440 name */
- .id = -1,
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_CAMCLK,
.enable = s3c2443_clkcon_enable_s,
@@ -206,7 +197,6 @@ static struct clksrc_clk clksrc_clks[] = {
}, {
.clk = {
.name = "display-if",
- .id = -1,
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_DISPCLK,
.enable = s3c2443_clkcon_enable_s,
@@ -219,13 +209,11 @@ static struct clksrc_clk clksrc_clks[] = {
static struct clk init_clocks_off[] = {
{
.name = "adc",
- .id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_ADC,
}, {
.name = "i2c",
- .id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_IIC,
@@ -235,136 +223,117 @@ static struct clk init_clocks_off[] = {
static struct clk init_clocks[] = {
{
.name = "dma",
- .id = 0,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA0,
}, {
.name = "dma",
- .id = 1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA1,
}, {
.name = "dma",
- .id = 2,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA2,
}, {
.name = "dma",
- .id = 3,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA3,
}, {
.name = "dma",
- .id = 4,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA4,
}, {
.name = "dma",
- .id = 5,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA5,
}, {
.name = "hsmmc",
- .id = 1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_HSMMC,
}, {
.name = "gpio",
- .id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_GPIO,
}, {
.name = "usb-host",
- .id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_USBH,
}, {
.name = "usb-device",
- .id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_USBD,
}, {
.name = "lcd",
- .id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_LCDC,
}, {
.name = "timers",
- .id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_PWMT,
}, {
.name = "cfc",
- .id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_CFC,
}, {
.name = "ssmc",
- .id = -1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_SSMC,
}, {
.name = "uart",
- .id = 0,
+ .devname = "s3c2440-uart.0",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_UART0,
}, {
.name = "uart",
- .id = 1,
+ .devname = "s3c2440-uart.1",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_UART1,
}, {
.name = "uart",
- .id = 2,
+ .devname = "s3c2440-uart.2",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_UART2,
}, {
.name = "uart",
- .id = 3,
+ .devname = "s3c2440-uart.3",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_UART3,
}, {
.name = "rtc",
- .id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_RTC,
}, {
.name = "watchdog",
- .id = -1,
.parent = &clk_p,
.ctrlbit = S3C2443_PCLKCON_WDT,
}, {
.name = "ac97",
- .id = -1,
.parent = &clk_p,
.ctrlbit = S3C2443_PCLKCON_AC97,
}, {
.name = "nand",
- .id = -1,
.parent = &clk_h,
}, {
.name = "usb-bus-host",
- .id = -1,
.parent = &clk_usb_bus_host.clk,
}
};
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index e30bd45..aecf9e9 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -195,7 +195,6 @@ struct clk_ops clk_ops_def_setrate = {
struct clk clk_xtal = {
.name = "xtal",
- .id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
@@ -203,30 +202,25 @@ struct clk clk_xtal = {
struct clk clk_ext = {
.name = "ext",
- .id = -1,
};
struct clk clk_epll = {
.name = "epll",
- .id = -1,
};
struct clk clk_mpll = {
.name = "mpll",
- .id = -1,
.ops = &clk_ops_def_setrate,
};
struct clk clk_upll = {
.name = "upll",
- .id = -1,
.parent = NULL,
.ctrlbit = 0,
};
struct clk clk_f = {
.name = "fclk",
- .id = -1,
.rate = 0,
.parent = &clk_mpll,
.ctrlbit = 0,
@@ -234,7 +228,6 @@ struct clk clk_f = {
struct clk clk_h = {
.name = "hclk",
- .id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
@@ -243,7 +236,6 @@ struct clk clk_h = {
struct clk clk_p = {
.name = "pclk",
- .id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
@@ -252,7 +244,6 @@ struct clk clk_p = {
struct clk clk_usb_bus = {
.name = "usb-bus",
- .id = -1,
.rate = 0,
.parent = &clk_upll,
};
@@ -260,7 +251,6 @@ struct clk clk_usb_bus = {
struct clk s3c24xx_uclk = {
.name = "uclk",
- .id = -1,
};
/* initialise the clock system */
diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
index 46c9381..f1bba88 100644
--- a/arch/arm/plat-samsung/pwm-clock.c
+++ b/arch/arm/plat-samsung/pwm-clock.c
@@ -268,6 +268,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = {
[0] = {
.clk = {
.name = "pwm-tdiv",
+ .devname = "s3c24xx-pwm.0",
.ops = &clk_tdiv_ops,
.parent = &clk_timer_scaler[0],
},
@@ -275,6 +276,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = {
[1] = {
.clk = {
.name = "pwm-tdiv",
+ .devname = "s3c24xx-pwm.1",
.ops = &clk_tdiv_ops,
.parent = &clk_timer_scaler[0],
}
@@ -282,6 +284,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = {
[2] = {
.clk = {
.name = "pwm-tdiv",
+ .devname = "s3c24xx-pwm.2",
.ops = &clk_tdiv_ops,
.parent = &clk_timer_scaler[1],
},
@@ -289,6 +292,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = {
[3] = {
.clk = {
.name = "pwm-tdiv",
+ .devname = "s3c24xx-pwm.3",
.ops = &clk_tdiv_ops,
.parent = &clk_timer_scaler[1],
},
@@ -296,6 +300,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = {
[4] = {
.clk = {
.name = "pwm-tdiv",
+ .devname = "s3c24xx-pwm.4",
.ops = &clk_tdiv_ops,
.parent = &clk_timer_scaler[1],
},
@@ -361,26 +366,31 @@ static struct clk_ops clk_tin_ops = {
static struct clk clk_tin[] = {
[0] = {
.name = "pwm-tin",
+ .devname = "s3c24xx-pwm.0",
.id = 0,
.ops = &clk_tin_ops,
},
[1] = {
.name = "pwm-tin",
+ .devname = "s3c24xx-pwm.1",
.id = 1,
.ops = &clk_tin_ops,
},
[2] = {
.name = "pwm-tin",
+ .devname = "s3c24xx-pwm.2",
.id = 2,
.ops = &clk_tin_ops,
},
[3] = {
.name = "pwm-tin",
+ .devname = "s3c24xx-pwm.3",
.id = 3,
.ops = &clk_tin_ops,
},
[4] = {
.name = "pwm-tin",
+ .devname = "s3c24xx-pwm.4",
.id = 4,
.ops = &clk_tin_ops,
},
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index 2231d80..e3bb806 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -259,6 +259,8 @@ static void __init s3c2410_timer_resources(void)
clk_enable(timerclk);
if (!use_tclk1_12()) {
+ tmpdev.id = 4;
+ tmpdev.dev.init_name = "s3c24xx-pwm.4";
tin = clk_get(&tmpdev.dev, "pwm-tin");
if (IS_ERR(tin))
panic("failed to get pwm-tin clock for system timer");
--
1.6.6.rc2
More information about the linux-arm-kernel
mailing list