[PATCH 5/6] ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq function

[Fabio Estevam]

Use the standard gpio_to_irq function instead of a dedicated IRQ_GPIOx macro.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/mach-imx/mach-mx27_3ds.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 3b05aa6..f56bf45 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -51,6 +51,7 @@
 #define SPI1_SS0		IMX_GPIO_NR(4, 28)
 #define LCD_RESET		IMX_GPIO_NR(1, 3)
 #define LCD_ENABLE		IMX_GPIO_NR(1, 31)
+#define SD1_CD			IMX_GPIO_NR(2, 26)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -164,13 +165,13 @@ static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
 static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
 				void *data)
 {
-	return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
-			IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
+	return request_irq(gpio_to_irq(SD1_CD), detect_irq,
+	IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
 }
 
 static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
 {
-	free_irq(IRQ_GPIOB(26), data);
+	free_irq(gpio_to_irq(SD1_CD), data);
 }
 
 static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
@@ -353,7 +354,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 		.bus_num	= 1,
 		.chip_select	= 0, /* SS0 */
 		.platform_data	= &mc13783_pdata,
-		.irq = IRQ_GPIOC(14),
+		.irq = gpio_to_irq(PMIC_INT),
 		.mode = SPI_CS_HIGH,
 	}, {
 		.modalias	= "l4f00242t03",
-- 
1.6.0.4