[PATCH 5/10] arch/arm/mach-s5pv210/cpufreq.c: add missing clk_put

[Kukjin Kim]

On 06/01/11 10:10, Julia Lawall wrote:
> From: Julia Lawall<julia at diku.dk>
>
> The successive calls to clk_get each call clk_put in the case of failure,
> but this is not done for subsequent error handling code.  The calls to
> clk_get are moved to the end of the function, and appropriate gotos are
> added.
>
> A simplified version of the semantic match that finds this problem is as
> follows: (http://coccinelle.lip6.fr/)
>
> //<smpl>
> @r exists@
> expression e1,e2;
> statement S;
> @@
>
> e1 = clk_get at p1(...);
> ... when != e1 = e2
>      when != clk_put(e1)
>      when any
> if (...) { ... when != clk_put(e1)
>                 when != if (...) { ... clk_put(e1) ... }
> * return at p3 ...;
>   } else S
> //</smpl>
>
> Signed-off-by: Julia Lawall<julia at diku.dk>
>
> ---
>   arch/arm/mach-s5pv210/cpufreq.c |   25 +++++++++++++++++--------
>   1 file changed, 17 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c
> index 22046e2..97a29e1 100644
> --- a/arch/arm/mach-s5pv210/cpufreq.c
> +++ b/arch/arm/mach-s5pv210/cpufreq.c
> @@ -414,6 +414,7 @@ static int check_mem_type(void __iomem *dmc_reg)
>   static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
>   {
>   	unsigned long mem_type;
> +	int ret;
>
>   	cpu_clk = clk_get(NULL, "armclk");
>   	if (IS_ERR(cpu_clk))
> @@ -421,19 +422,20 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
>
>   	dmc0_clk = clk_get(NULL, "sclk_dmc0");
>   	if (IS_ERR(dmc0_clk)) {
> -		clk_put(cpu_clk);
> -		return PTR_ERR(dmc0_clk);
> +		ret = PTR_ERR(dmc0_clk);
> +		goto out_dmc0;
>   	}
>
>   	dmc1_clk = clk_get(NULL, "hclk_msys");
>   	if (IS_ERR(dmc1_clk)) {
> -		clk_put(dmc0_clk);
> -		clk_put(cpu_clk);
> -		return PTR_ERR(dmc1_clk);
> +		ret = PTR_ERR(dmc1_clk);
> +		goto out_dmc1;
>   	}
>
> -	if (policy->cpu != 0)
> -		return -EINVAL;
> +	if (policy->cpu != 0) {
> +		ret = -EINVAL;
> +		goto out_dmc1;
> +	}
>
>   	/*
>   	 * check_mem_type : This driver only support LPDDR&  LPDDR2.
> @@ -443,7 +445,8 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
>
>   	if ((mem_type != LPDDR)&&  (mem_type != LPDDR2)) {
>   		printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
> -		return -EINVAL;
> +		ret = -EINVAL;
> +		goto out_dmc1;
>   	}
>
>   	/* Find current refresh counter and frequency each DMC */
> @@ -460,6 +463,12 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
>   	policy->cpuinfo.transition_latency = 40000;
>
>   	return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
> +
> +out_dmc1:
> +	clk_put(dmc0_clk);
> +out_dmc0:
> +	clk_put(cpu_clk);
> +	return ret;
>   }
>
>   static struct cpufreq_driver s5pv210_driver = {
>
>

Yeah, OK to me, will apply.
Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.