December 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Dec 1 00:19:57 EST 2010
Ending: Fri Dec 31 20:11:57 EST 2010
Messages: 3480

• [patch 0/2] iMX51 small fixes   Arnaud Patard (Rtp)
• [patch 1/2] imx51: fix gpiolib support   Arnaud Patard (Rtp)
• [patch 2/2] Fix imx cpufreq driver as module   Arnaud Patard (Rtp)
• [patch 1/2] imx51: fix gpiolib support   Arnaud Patard (Rtp)
• [patch 1/2] imx51: fix gpiolib support   Arnaud Patard (Rtp)
• [patch 1/2] imx51: fix gpiolib support   Arnaud Patard (Rtp)
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Arnaud Patard (Rtp)
• [PATCH] add clock debug information for imx51 babbage   Arnaud Patard (Rtp)
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Arnaud Patard (Rtp)
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Arnaud Patard (Rtp)
• [PATCH] support PMIC mc13892   Arnaud Patard (Rtp)
• [PATCH] support PMIC mc13892   Arnaud Patard (Rtp)
• [PATCHv2] support PMIC mc13892   Arnaud Patard (Rtp)
• [PATCHv3] support PMIC mc13892   Arnaud Patard (Rtp)
• ulpi_check_integrity returning error   Arnaud Patard (Rtp)
• ulpi_check_integrity returning error   Arnaud Patard (Rtp)
• [PATCH] i.MX51: Full iomux support   Arnaud Patard (Rtp)
• [PATCH] i.MX51: Full iomux support   Arnaud Patard (Rtp)
• [PATCH 6/9] ARM i.MX51: Add IPU device support   Arnaud Patard (Rtp)
• [patch 0/5] iMX51 usb fixes   Arnaud Patard (Rtp)
• [patch 1/5] ehci-mxc: Enable vbus later   Arnaud Patard (Rtp)
• [patch 2/5] ulpi: handle ULPI_OTG_CTRL_CHRGVBUS   Arnaud Patard (Rtp)
• [patch 3/5] arch/arm/plat-mxc/ehci.c: fix errors/typos   Arnaud Patard (Rtp)
• [patch 4/5] MX51: Add support for usb host 2   Arnaud Patard (Rtp)
• [patch 5/5] mx51: fix usb clock support   Arnaud Patard (Rtp)
• [PATCH v2] i.MX51 Framebuffer support   Arnaud Patard (Rtp)
• [patch 2/5] ulpi: handle ULPI_OTG_CTRL_CHRGVBUS   Arnaud Patard (Rtp)
• [patch 1/5] ehci-mxc: Enable vbus later   Arnaud Patard (Rtp)
• [PATCH v2] i.MX51 Framebuffer support   Arnaud Patard (Rtp)
• [PATCH] sdhci: Add pre and post reset processing for chip specific= reset   philip (none)
• [PATCH] sdhci: Add pre and post reset processing for chip specific= reset   philip (none)
• [PATCH v5] OMAP2+: PM: omap device: API's for handling mstandby mode   ABRAHAM, KISHON VIJAY
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Carmelo AMOROSO
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Carmelo AMOROSO
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Carmelo AMOROSO
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Filippo ARCIDIACONO
• [PATCH (sh-2.6) 2/2] arm: use generic implementation of boot_init_stack_canary   Filippo ARCIDIACONO
• [PATCH 1/2] stackprotector: add stack smashing protector generic implementation   Filippo ARCIDIACONO
• [PATCH 2/2] sh: stackprotector: change the canary value per task   Filippo ARCIDIACONO
• [PATCH] ARM: ux500: platsmp: Fix section mismatch   Jonas Aaberg
• S3C OTG udc driver isochronous support   Thomas Abraham
• Returned mail: Data format error   Mail Administrator
• [PATCH 09/10] MCDE: Add build files and bus   Dave Airlie
• [PATCH 0/9] TI DMM-TILER driver   Dave Airlie
• [PATCH 1/3] ASoC: EP93xx I2S and PCM fixes   Alexander
• [PATCH 2/3] ASoC: CS4271 codec support   Alexander
• [PATCH 3/3] ASoC: EDB93xx machine sound driver   Alexander
• [PATCH 2/3] ASoC: CS4271 codec support   Alexander
• [PATCH 1/3] ASoC: EP93xx I2S and PCM fixes   Alexander
• [PATCH] ASoC: EP93xx: sampling rate range extended   Alexander
• [PATCH] ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code   Alexander
• [PATCH 1/3] ASoC: EP93xx I2S and PCM fixes   Alexander
• [PATCH 1/3] ASoC: EP93xx I2S and PCM fixes   Alexander
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Carmelo Amoroso
• [PATCH] ARM: mx5/mx51_3ds: Add watchdog support   Daiane Angolini
• [PATCH] ARM: mx5/mx51_3ds: Add watchdog support   Daiane Angolini
• [PATCH] msm: trout: add keypad support   Arce, Abraham
• Change of Default kernel page size i.e 4KB   Ralf Baechle
• [PATCH v2] arm: mach-omap2: remove NULL board_mux from board files   Felipe Balbi
• [PATCH v2] arm: mach-omap2: remove NULL board_mux from board files   Felipe Balbi
• [PATCH] arm: plat-omap: counter_32k: Fix build error due to IS_ERR   Felipe Balbi
• [Patch v4] AM35xx: Craneboard: Add USB EHCI support   Felipe Balbi
• [Patch v5] AM35xx: Craneboard: Add USB EHCI support   Felipe Balbi
• [GIT PULL] OMAP USB Changes for Merge Window   Felipe Balbi
• [PATCH 1/2] arm: omap: craneboard: Add USB EHCI support   Felipe Balbi
• [PATCH 2/2] arm: omap: tusb6010: add name for MUSB IRQ   Felipe Balbi
• [GIT PULL] OMAP USB Changes for Merge Window   Felipe Balbi
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Chris Ball
• [PATCH] mmci: drop superfluous regulator #ifdef   Chris Ball
• [PATCH] mmci: drop superfluous regulator #ifdef   Chris Ball
• [PATCH] MMC: Fix multiblock SDIO transfers in AT91 MCI   Chris Ball
• [PATCH] MMC: Fix multiblock SDIO transfers in ATMEL MCI   Chris Ball
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Chris Ball
• [PATCH] MMC: Fix multiblock SDIO transfers in ATMEL MCI   Chris Ball
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Chris Ball
• [PATCH v4 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Chris Ball
• RFC: Dynamic hwcaps   Jesse Barker
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   Valentine Barshak
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   Valentine Barshak
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   Valentine Barshak
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix (take 2)   Valentine Barshak
• [PATCH 30/54] ARM: msm: irq_data conversion.   Gregory Bean
• [PATCH 1/2] msm: gpiomux: Improve gpiomux interface design.   Gregory Bean
• [PATCH 2/2] msm: documentation: Update gpiomux documentation.   Gregory Bean
• [PATCH] omap1: htc_herald: Fix compilation warning.   Marek Belisko
• [PATCH] omap1: pm_bus: Fix compilation warning.   Marek Belisko
• [PATCH] omap1: mailbox: Fix compilation warning.   Marek Belisko
• [PATCH] arm: ecard: Fix compilation warning.   Marek Belisko
• [PATCH v3 0/4] Introduce hardware spinlock framework   Ohad Ben-Cohen
• [PATCH v3 1/4] drivers: hwspinlock: add framework   Ohad Ben-Cohen
• [PATCH v3 2/4] drivers: hwspinlock: add OMAP implementation   Ohad Ben-Cohen
• [PATCH v3 3/4] OMAP4: hwmod data: Add hwspinlock   Ohad Ben-Cohen
• [PATCH v3 4/4] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH v3 0/4] Introduce hardware spinlock framework   Ohad Ben-Cohen
• [RFC] add BUG_ON_MAPPABLE_NULL macro   Ohad Ben-Cohen
• [RFC] add BUG_ON_MAPPABLE_NULL macro   Ohad Ben-Cohen
• [PATCH v3 0/4] Introduce hardware spinlock framework   Ohad Ben-Cohen
• [PATCH v3 0/4] Introduce hardware spinlock framework   Ohad Ben-Cohen
• [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE   Ohad Ben-Cohen
• [PATCH v3 0/4] Introduce hardware spinlock framework   Ohad Ben-Cohen
• [PATCH v3 0/4] Introduce hardware spinlock framework   Ohad Ben-Cohen
• [PATCH 09/10] MCDE: Add build files and bus   Arnd Bergmann
• [PATCH] Kconfig: add new symbol MIGHT_HAVE_PCI   Arnd Bergmann
• [PATCH] ARM: Gemini: Add support for PCI BUS   Arnd Bergmann
• [RFC PATCH 06/18] ARM: LPAE: Introduce the 3-level page table format definitions   Arnd Bergmann
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   Arnd Bergmann
• [PATCH 7/7] msm: Build support for the MSM8960 target   Arnd Bergmann
• [PATCH 4/7] msm: Board file for MSM8960 simulator   Arnd Bergmann
• [PATCH 1/9] ARM i.MX51: Add ipu clock support   Arnd Bergmann
• [PATCH 6/9] ARM i.MX51: Add IPU device support   Arnd Bergmann
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Arnd Bergmann
• [PATCH v6 00/15] ARM: mxs: Add initial support for MX23 and MX28   Arnd Bergmann
• [PATCH 6/9] ARM i.MX51: Add IPU device support   Arnd Bergmann
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   Arnd Bergmann
• [PATCH 1/9] ARM i.MX51: Add ipu clock support   Arnd Bergmann
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Arnd Bergmann
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Arnd Bergmann
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Arnd Bergmann
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Arnd Bergmann
• [PATCH] msm: rmnet: msm rmnet smd virtual ethernet driver   Arnd Bergmann
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Arnd Bergmann
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   Arnd Bergmann
• dma_cache_sync replacement call   Arnd Bergmann
• [PATCH 0/9] TI DMM-TILER driver   Arnd Bergmann
• [PATCH 0/9] TI DMM-TILER driver   Arnd Bergmann
• [PATCH 09/10] MCDE: Add build files and bus   Arnd Bergmann
• [PATCH 1/6 v8] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Arnd Bergmann
• [PATCH 1/2] ARM: convert dma-mapping to asm-generic API   Arnd Bergmann
• [PATCH 1/2] ARM: convert dma-mapping to asm-generic API   Arnd Bergmann
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Arnd Bergmann
• [PATCH 15/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Arnd Bergmann
• [PATCH 1/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Arnd Bergmann
• [PATCH 3/6] ARM Realview PCIX map include file changes   Arnd Bergmann
• [PATCH 3/6] ARM Realview PCIX map include file changes   Arnd Bergmann
• Fwd: [PATCH 7/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Arnd Bergmann
• [PATCH 1/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Arnd Bergmann
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   Arnd Bergmann
• (arm-)global platform device registration functions   Arnd Bergmann
• Problem with sram size on OMAP1611 (OSK)   Tim Bird
• [PATCH 02/16] ARM: Remove dependency of plat-orion GPIO code on mach directory includes.   Saeed Bishara
• [PATCH 04/16] ARM: Dove: Remove PXA compatibility IRQ defines.   Saeed Bishara
• [PATCH 1/3] mtd: FSMC NAND remove PARTITION macro and fix compile noise   Artem Bityutskiy
• [PATCH] MTD: NAND: ams-delta: convert to platform driver   Artem Bityutskiy
• [PATCH v2] MTD: NAND: ams-delta: convert to platform driver   Artem Bityutskiy
• [PATCH] MTD: m25p80: add debugging trace in sst_write()   Artem Bityutskiy
• bad pmd   Aric D. Blumer
• bad pmd   Aric D. Blumer
• bad pmd   Aric D. Blumer
• [PATCH 14/21] ARM: tegra: irq: Add debugfs file to show wake irqs   Stephen Boyd
• [PATCHv3 0/4] ARM: Fixing udelay() for SMP and non-SMP systems   Stephen Boyd
• [PATCHv3 1/4] ARM: Translate delay.S into (mostly) C   Stephen Boyd
• [PATCHv3 2/4] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCHv3 3/4] ARM: Implement a timer based __delay() loop   Stephen Boyd
• [PATCHv3 4/4] msm: timer: Migrate to timer based __delay()   Stephen Boyd
• [PATCH v2 2/6] msm: Secure Channel Manager (SCM) support   Stephen Boyd
• [PATCHv3 2/4] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCHv3 2/4] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   Stephen Boyd
• [PATCH 00/22] MSM clock driver updates   Stephen Boyd
• [PATCH 01/22] msm: clock: Remove unused code and definitions   Stephen Boyd
• [PATCH 02/22] msm: clock: Move debugfs code from clock.c to clock-debug.c   Stephen Boyd
• [PATCH 03/22] msm: clock: Invert debugfs directory layout   Stephen Boyd
• [PATCH 04/22] msm: clock: Add support for more proc_comm clocks   Stephen Boyd
• [PATCH 05/22] msm: clock-7x30: Add 7x30 local clock driver   Stephen Boyd
• [PATCH 06/22] msm: clock-7x30: Update clock table   Stephen Boyd
• [PATCH 07/22] msm: clock: Refactor clock-7x30 into generic clock-local driver   Stephen Boyd
• [PATCH 08/22] msm: clock-8x60: Add msm8x60 local clock driver   Stephen Boyd
• [PATCH 09/22] msm: clock: Remove references to clk_ops_pcom   Stephen Boyd
• [PATCH 10/22] msm: Move 8x60 to the real clock driver   Stephen Boyd
• [PATCH 11/22] msm: clock Add debugfs interface to measure clock rates   Stephen Boyd
• [PATCH 12/22] msm: clock: Add list_rate debugfs nodes for locally-controlled clocks   Stephen Boyd
• [PATCH 13/22] msm: clock: Push down clock count and locking into sub drivers   Stephen Boyd
• [PATCH 14/22] msm: clock: Support clk_set_parent() clk_ops   Stephen Boyd
• [PATCH 15/22] msm: clock-pcom: Add pbus specific clock ops   Stephen Boyd
• [PATCH 16/22] msm: clock: Implement rate voting   Stephen Boyd
• [PATCH 17/22] msm: Migrate to clock rate voting   Stephen Boyd
• [PATCH 18/22] msm: clock: Migrate to clkdev   Stephen Boyd
• [PATCH 19/22] msm: iommu: Add bus clocks to platform data   Stephen Boyd
• [PATCH 20/22] msm: iommu: Clock control for the IOMMU driver   Stephen Boyd
• [PATCH 21/22] msm: iommu: Rework clock logic and add IOMMU bus clock control   Stephen Boyd
• [PATCH 22/22] msm: clock-8x60: Don't keep IOMMU clocks on at boot   Stephen Boyd
• [PATCH] hvc_dcc: Simplify assembly for v6 and v7 ARM   Stephen Boyd
• [PATCH] hvc_dcc: Simplify assembly for v6 and v7 ARM   Stephen Boyd
• [PATCH 0/3] hvc_dcc cleanups and fixes   Stephen Boyd
• [PATCH 1/3] hvc_dcc: Fix bad code generation by marking assembly volatile   Stephen Boyd
• [PATCH 2/3] hvc_dcc: Simplify put_chars()/get_chars() loops   Stephen Boyd
• [PATCH 3/3] hvc_dcc: Simplify assembly for v6 and v7 ARM   Stephen Boyd
• [PATCH 1/3] hvc_dcc: Fix bad code generation by marking assembly volatile   Stephen Boyd
• [PATCHv4 0/4] ARM: Fixing udelay() for SMP and non-SMP systems   Stephen Boyd
• [PATCHv4 1/4] ARM: Translate delay.S into (mostly) C   Stephen Boyd
• [PATCHv4 2/4] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCHv4 3/4] ARM: Implement a timer based __delay() loop   Stephen Boyd
• [PATCHv4 4/4] msm: timer: Migrate to timer based __delay()   Stephen Boyd
• [PATCH] msm: qsd8x50: Platform data isn't init data   Stephen Boyd
• [PATCH 02/24] ARM: bcmring: update clock source registration   Scott Branden
• {PATCH] BCMRING maintainer change (was RE: [PATCH 02/24] ARM: bcmring: update clock source registration)   Scott Branden
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Jassi Brar
• [PATCH 2/4] mach-s5pv310: Add resource definitions for mipi-csis   Jassi Brar
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Jassi Brar
• [PATCH 2/4] mach-s5pv310: Add resource definitions for mipi-csis   Jassi Brar
• [PATCH 1/3] Add a common struct clk   Jassi Brar
• [PATCH 00/17] Samsung: Enable Audio Devices   Jassi Brar
• [PATCH 01/17] ARM: S5P6442: Implement i2c-gpio config   Jassi Brar
• [PATCH 02/17] ARM: SMDK6442: Enable I2C0 device on board   Jassi Brar
• [PATCH 03/17] ARM: SMDK6442: Enable I2S device to work   Jassi Brar
• [PATCH 04/17] ARM: S5P6450: Define clocks for I2S   Jassi Brar
• [PATCH 05/17] ARM: S5P6450: Define base addresses for I2S   Jassi Brar
• [PATCH 06/17] ARM: S5P64X0: Segregate audio devices   Jassi Brar
• [PATCH 07/17] ARM: SMDK6440: Enable I2S device to work   Jassi Brar
• [PATCH 08/17] ARM: SMDK6450: Enable I2S device to work   Jassi Brar
• [PATCH 09/17] ARM: SMDKC110: Enable I2S device to work   Jassi Brar
• [PATCH 10/17] ARM: SMDKV210: Enable I2S device to work   Jassi Brar
• [PATCH 11/17] ARM: SMDKV310: Enable I2C1 device   Jassi Brar
• [PATCH 12/17] ARM: S5PV310: Add PDMA clocks   Jassi Brar
• [PATCH 13/17] ARM: S5PV310: Add AC97 clocks   Jassi Brar
• [PATCH 14/17] ARM: S5PV310: Define I2S clocks   Jassi Brar
• [PATCH 15/17] ARM: S5PV310: Add AC97 support for SMDK   Jassi Brar
• [PATCH 16/17] ARM: SMDKV310: Enable I2S device   Jassi Brar
• [PATCH 17/17] ARM: SMDKC210: Enable I2S device   Jassi Brar
• [PATCH 14/17] ARM: S5PV310: Define I2S clocks   Jassi Brar
• [PATCH 14/17] ARM: S5PV310: Define I2S clocks   Jassi Brar
• [PATCH 06/17] ARM: S5P64X0: Segregate audio devices   Jassi Brar
• [PATCH 04/17] ARM: S5P6450: Define clocks for I2S   Jassi Brar
• [PATCH 00/17] Samsung: Enable Audio Devices   Jassi Brar
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Jassi Brar
• bug in PL011 console   Jassi Brar
• [alsa-devel] [PATCH 0/4] Modify configures to support Samsung ASoC dependancyless   Jassi Brar
• bug in PL011 console   Jassi Brar
• [PATCH RFC] arm: Add argument to init_machine   David Brown
• [PATCH RFC] arm: Add argument to init_machine   David Brown
• [PATCH RFC] arm: Add argument to init_machine   David Brown
• [PATCH 0/5 v3] SMP support for msm   David Brown
• [PATCH v4 0/5] SMP support for msm   David Brown
• [PATCH v5 5/5] msm: add SMP support for msm   David Brown
• [PATCH 2/7] msm: Physical offset for MSM8960   David Brown
• [PATCH 1/5] msm: Secure Channel Manager (SCM) support   David Brown
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   David Brown
• [PATCH 2/7] msm: Physical offset for MSM8960   David Brown
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   David Brown
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   David Brown
• [PATCH 08/40] ARM: MSM: update clock source registration   David Brown
• [PATCHv8 00/12] Contiguous Memory Allocator   David Brown
• Git pull request: ux500-core for the v2.6.38 merge window   David Brown
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   David Brown
• [PATCH 00/54] ARM irq_data conversion.   Mark Brown
• [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods   Mark Brown
• [PATCHv2] make mc13783 regulator code generic   Mark Brown
• [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods   Mark Brown
• [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods   Mark Brown
• [PATCH 3/3] ARM: S3C64XX: Use chip_data to store the shift for EINTs   Mark Brown
• [PATCH] mmci: supply per-instance regulator name   Mark Brown
• [PATCH] mmci: supply per-instance regulator name   Mark Brown
• [PATCH] mmci: supply per-instance regulator name   Mark Brown
• [PATCH] mmci: drop superfluous regulator #ifdef   Mark Brown
• [PATCH 1/2] Change the register name definitions for mc13783   Mark Brown
• [PATCH 2/2] make mc13783 regulator code generic   Mark Brown
• [PATCHv2] support PMIC mc13892   Mark Brown
• [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files   Mark Brown
• [PATCHv2] support PMIC mc13892   Mark Brown
• [PATCH v7 06/12] regulator: add driver for tps6524x regulator   Mark Brown
• [PATCHv3] support PMIC mc13892   Mark Brown
• [PATCH 1/3] ASoC: EP93xx I2S and PCM fixes   Mark Brown
• [PATCH 2/3] ASoC: CS4271 codec support   Mark Brown
• [PATCH 3/3] ASoC: EDB93xx machine sound driver   Mark Brown
• [PATCH 2/3] ASoC: CS4271 codec support   Mark Brown
• [PATCH 2/3] ASoC: CS4271 codec support   Mark Brown
• [PATCHv3] support PMIC mc13892   Mark Brown
• [PATCH 2/3] ASoC: CS4271 codec support   Mark Brown
• [PATCH 1/3] ASoC: EP93xx I2S and PCM fixes   Mark Brown
• [PATCH] ASoC: EP93xx: sampling rate range extended   Mark Brown
• [PATCH 1/3] ASoC: EP93xx I2S and PCM fixes   Mark Brown
• [PATCH 1/9] regulators: Moved define for number of regulators in ab8500   Mark Brown
• [PATCH 2/9] regulators: Fixed errors in ab8500 register mapping   Mark Brown
• [PATCH 3/9] regulators: Clean out unused code in ab8500 regulators   Mark Brown
• [PATCH 4/9] regulators: Added ab8500 v2 support   Mark Brown
• [PATCH 5/9] regulators: Updated ab8500 variable names, macro names and comments   Mark Brown
• [PATCH 6/9] regulators: Modified ab8500 error handling   Mark Brown
• [PATCH 7/9] regulators: Added verbose debug messages to ab8500 regulators   Mark Brown
• [PATCH 8/9] regulators: Removed macros for initialization of ab8500 regulators   Mark Brown
• [PATCH 9/9] mach-ux500: Updated and connected ab8500 regulator board configuration   Mark Brown
• [PATCH 1/3] ASoC: EP93xx I2S and PCM fixes   Mark Brown
• [PATCH v7 00/12] tnetv107x ssp drivers   Mark Brown
• [PATCH] ARM: mmp: added 5V Regulator enable for Brownstone   Mark Brown
• [PATCH 3/3] regulator: support PMIC mc13892   Mark Brown
• [PATCH] ARM: mmp: refactored 5V regulator support using fixed-regulator   Mark Brown
• [PATCH 00/17] Samsung: Enable Audio Devices   Mark Brown
• [PATCHv3 1/4] mc13xxx-core: Consolidate common code to prepare for separate i2c and spi   Mark Brown
• [PATCH 00/17] Samsung: Enable Audio Devices   Mark Brown
• [PATCH 2/4] ARM: SAMSUNG: Add SMDK audio configuration   Mark Brown
• [PATCH V2] S5PC210: universal: update support pmic for c210 universal board   Mark Brown
• [PATCH V2] S5PC210: universal: update support pmic for c210 universal board   Mark Brown
• [PATCH 15/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Mark Brown
• [PATCH] ARM: mmp: added 5V Regulator enable for Brownstone   Mark F. Brown
• [PATCH] ARM: mmp: refactored 5V regulator support using fixed-regulator   Mark F. Brown
• [PATCH] ARM: mmp: refactored 5V regulator support using fixed-regulator   Mark F. Brown
• [PATCH] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6   David Brownell
• [PATCH] AT91: usb gadget: fix freeing irq in _udc_remove()   David Brownell
• [PATCH 1/9] spi/pxa2xx: register driver properly   David Brownell
• [PATCH 1/9] spi/pxa2xx: register driver properly   David Brownell
• [PATCH 00/54] ARM irq_data conversion.   'Lennert Buytenhek'
• [PATCH 40/54] ARM: Samsung SoCs: irq_data conversion.   'Lennert Buytenhek'
• [PATCH 40/54] ARM: Samsung SoCs: irq_data conversion.   'Lennert Buytenhek'
• [PATCH 40/54] ARM: Samsung SoCs: irq_data conversion.   'Lennert Buytenhek'
• [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods   Lennert Buytenhek
• [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods   Lennert Buytenhek
• [PATCH 10/54] ARM: bcmring: irq_data conversion.   Lennert Buytenhek
• [PATCH] ARM: pxa: PXA_ESERIES depends on FB_W100.   Lennert Buytenhek
• [PATCH 15/54] ARM: ep93xx: irq_data conversion.   Lennert Buytenhek
• [PATCH 1/3] ARM: s3c24xx: irq_data conversion.   Lennert Buytenhek
• [PATCH 2/3] ARM: S5P: irq_data conversion.   Lennert Buytenhek
• [PATCH 3/3] ARM: plat-samsung: some GENERIC_HARDIRQS_NO_DEPRECATED build fixes.   Lennert Buytenhek
• [PATCH 00/54] ARM irq_data conversion.   Lennert Buytenhek
• [PATCH 00/16] ARM: various multi-mach patches   Lennert Buytenhek
• [PATCH 01/16] ARM: Remove dependency of plat-orion time code on mach directory includes.   Lennert Buytenhek
• [PATCH 02/16] ARM: Remove dependency of plat-orion GPIO code on mach directory includes.   Lennert Buytenhek
• [PATCH 03/16] ARM: Remove some spurious mach dir includes.   Lennert Buytenhek
• [PATCH 04/16] ARM: Dove: Remove PXA compatibility IRQ defines.   Lennert Buytenhek
• [PATCH 05/16] ARM: Always reassign PCI bus numbers.   Lennert Buytenhek
• [PATCH 06/16] ARM: iop13xx: Make PCIBIOS_MIN_* constants.   Lennert Buytenhek
• [PATCH 07/16] ARM: Make PCIBIOS_* into global variables.   Lennert Buytenhek
• [PATCH 08/16] ARM: at91: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Lennert Buytenhek
• [PATCH 09/16] ARM: ep93xx: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Lennert Buytenhek
• [PATCH 10/16] ARM: gemini: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Lennert Buytenhek
• [PATCH 11/16] ARM: mxc: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Lennert Buytenhek
• [PATCH 12/16] ARM: pxa: Provide gpiolib ->to_irq() implementation.   Lennert Buytenhek
• [PATCH 13/16] ARM: mmp: Switch over to gpiolib's version of __gpio_to_irq().   Lennert Buytenhek
• [PATCH 14/16] ARM: pxa: Switch over to gpiolib's version of __gpio_to_irq().   Lennert Buytenhek
• [PATCH 15/16] ARM: sa1100: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Lennert Buytenhek
• [PATCH 16/16] ARM: w90x900: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Lennert Buytenhek
• [PATCH 02/16] ARM: Remove dependency of plat-orion GPIO code on mach directory includes.   Lennert Buytenhek
• [PATCH 01/16] ARM: Remove dependency of plat-orion time code on mach directory includes.   Lennert Buytenhek
• [PATCH v2] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Stephen Caudle
• [PATCH v2] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Stephen Caudle
• [PATCH v2] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Stephen Caudle
• [PATCH v2] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Stephen Caudle
• [PATCH 1/6 v8] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v8] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v10] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 3/6 v3] input: Add support for VIA VT8500 and compatibles in i8042   Alexey Charkov
• [PATCH 1/6 v10] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v11] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v12] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v12] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• Forced HW_BREAKPOINT   Cyril Chemparathy
• Forced HW_BREAKPOINT   Cyril Chemparathy
• Forced HW_BREAKPOINT   Cyril Chemparathy
• [PATCH v7 00/12] tnetv107x ssp drivers   Cyril Chemparathy
• [PATCH v7 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v7 02/12] davinci: add tnetv107x ssp platform device   Cyril Chemparathy
• [PATCH v7 03/12] davinci: add ssp config for tnetv107x evm board   Cyril Chemparathy
• [PATCH v7 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
• [PATCH v7 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
• [PATCH v7 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
• [PATCH v7 07/12] davinci: add tnetv107x evm regulators   Cyril Chemparathy
• [PATCH v7 08/12] gpio: add ti-ssp gpio driver   Cyril Chemparathy
• [PATCH v7 09/12] davinci: add tnetv107x evm ti-ssp gpio device   Cyril Chemparathy
• [PATCH v7 10/12] backlight: add support for tps6116x controller   Cyril Chemparathy
• [PATCH v7 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
• [PATCH v7 12/12] davinci: add tnetv107x evm i2c eeprom device   Cyril Chemparathy
• [PATCH v7 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
• [PATCH v7 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
• [RFCv2,0/8] mm: vcm: The Virtual Memory Manager for multiple IOMMUs   KyongHo Cho
• [RFCv2,1/8] mm: vcm: Virtual Contiguous Memory framework added   KyongHo Cho
• [RFCv2,2/8] mm: vcm: reference counting on a reservation added   KyongHo Cho
• [RFCv2,3/8] mm: vcm: physical memory allocator added   KyongHo Cho
• [RFCv2,4/8] mm: vcm: VCM VMM driver added   KyongHo Cho
• [RFCv2,5/8] mm: vcm: VCM MMU wrapper added   KyongHo Cho
• [RFCv2,6/8] mm: vcm: VCM One-to-One wrapper added   KyongHo Cho
• [RFCv2,7/8] mm: vcm: vcm-cma: VCM CMA driver added   KyongHo Cho
• [RFCv2,8/8] mm: vcm: Sample driver added   KyongHo Cho
• Bogus machine-type from bootloader   Alexander Clouter
• [PATCHv5 0/4] omap: iovmm - fixes for iovmm module   Felipe Contreras
• Mainline OMAP3 breakage (and other OMAP?)   Felipe Contreras
• Mainline OMAP3 breakage (and other OMAP?)   Felipe Contreras
• [PATCH 3/4] omap1: Add omap1_defconfig   Felipe Contreras
• [PATCHv6 4/4] omap: iommu - create new api to set valid da range   Felipe Contreras
• [PATCH 0/4] omap: iovmm - fixes for iovmm module   Felipe Contreras
• [PATCHv6 4/4] omap: iommu - create new api to set valid da range   Felipe Contreras
• [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files   Felipe Contreras
• [PATCHv8 00/12] Contiguous Memory Allocator   Felipe Contreras
• [PATCH v6] OMAP2+: PM: omap device: API's for handling mstandby mode   Cousson, Benoit
• [PATCH v7] OMAP2+: PM: omap device: API's for handling mstandby mode   Cousson, Benoit
• [PATCH v7] OMAP2+: PM: omap device: API's for handling mstandby mode   Cousson, Benoit
• [PATCH 11/14] OMAP4: PRCM: reorganize existing OMAP4 PRCM header files   Cousson, Benoit
• [PATCH 11/14] OMAP4: PRCM: reorganize existing OMAP4 PRCM header files   Cousson, Benoit
• [PATCH v2 0/2] OMAP: I2C and UART device name cleanup   Benoit Cousson
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Benoit Cousson
• [PATCH v2 2/2] OMAP: serial: Change device name: omap-hsuart -> omap_uart   Benoit Cousson
• [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver   Cousson, Benoit
• [PATCH v2 0/8] OMAP3&4: clock data: Fixes and add new clocks nodes   Benoit Cousson
• [PATCH v2 1/8] OMAP4: clock data: Add control for pad_clks_ck and slimbus_clk   Benoit Cousson
• [PATCH v2 2/8] OMAP3: clock data: Add "wkup_clkdm" in sr1_fck and sr2_fck   Benoit Cousson
• [PATCH v2 3/8] OMAP4: clock data: Add missing DPLL x2 clock nodes   Benoit Cousson
• [PATCH v2 4/8] OMAP4: clock data: Add missing fields in iva_hsd_byp_clk_mux_ck   Benoit Cousson
• [PATCH v2 5/8] OMAP4: PRCM: Add SCRM header file   Benoit Cousson
• [PATCH v2 6/8] OMAP4: clock data: Add SCRM auxiliary clock nodes   Benoit Cousson
• [PATCH v2 7/8] OMAP4: clock data: Export control to enable/disable CORE/PER M3 clocks   Benoit Cousson
• [PATCH v2 8/8] OMAP4: clock data: Add missing fixed divisors   Benoit Cousson
• [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver   Cousson, Benoit
• [PATCH 11/14] OMAP4: PRCM: reorganize existing OMAP4 PRCM header files   Cousson, Benoit
• [PATCH 0/5] OMAP4: hwmod data fixes and update   Benoit Cousson
• [PATCH 1/5] OMAP4: hwmod data: Fix hwmod entries order   Benoit Cousson
• [PATCH 2/5] OMAP4: hwmod data: Add SYSS_HAS_RESET_STATUS flag   Benoit Cousson
• [PATCH 3/5] OMAP4: hwmod data: Fix missing address in DMM and EMIF_FW   Benoit Cousson
• [PATCH 4/5] OMAP4: hwmod data: Add IVA and DSP   Benoit Cousson
• [PATCH 5/5] OMAP4: hwmod & clock data: Fix GPIO opt_clks and ocp_if iclk   Benoit Cousson
• [PATCH 0/5] OMAP4: hwmod data fixes and update   Cousson, Benoit
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Cousson, Benoit
• [PATCH 0/5] OMAP4: hwmod data fixes and update   Cousson, Benoit
• [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va   Cousson, Benoit
• [PATCH v3 5/5] OMAP: mailbox: add omap_device latency information   Cousson, Benoit
• [PATCH v2 4/8] OMAP4: clock data: Add missing fields in iva_hsd_byp_clk_mux_ck   Cousson, Benoit
• [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain   Benoit Cousson
• [PATCH 1/5] OMAP4: PM: Use the lowpwrstatechange feature on OMAP4   Benoit Cousson
• [PATCH 2/5] OMAP4: PM: Do not assume clkdm supports hw transitions   Benoit Cousson
• [PATCH 3/5] OMAP4: powerdomain: l4per pwrdm does not support OFF   Benoit Cousson
• [PATCH 4/5] OMAP4: powerdomain: Remove L3INIT_PD OFF state   Benoit Cousson
• [PATCH 5/5] OMAP4: clock data: Keep L3INSTR clock domain modulemode under HW control   Benoit Cousson
• [PATCH 05/12] OMAP4: PRCM: Add SCRM header file   Cousson, Benoit
• [PATCH 05/12] OMAP4: PRCM: Add SCRM header file   Cousson, Benoit
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Cousson, Benoit
• [PATCH 1/5] OMAP4: hwmod data: Fix hwmod entries order   Cousson, Benoit
• [PATCH v2 0/7] OMAP4: hwmod data fixes and update   Benoit Cousson
• [PATCH v2 1/7] OMAP4: hwmod data: Fix hwmod entries order   Benoit Cousson
• [PATCH v2 2/7] OMAP4: hwmod data: Add SYSS_HAS_RESET_STATUS flag   Benoit Cousson
• [PATCH v2 3/7] OMAP4: hwmod data: Fix missing address in DMM and EMIF_FW   Benoit Cousson
• [PATCH v2 4/7] OMAP4: hwmod data: Add IVA and DSP   Benoit Cousson
• [PATCH v2 5/7] OMAP4: hwmod & clock data: Fix GPIO opt_clks and ocp_if iclk   Benoit Cousson
• [PATCH v2 6/7] OMAP2+: omap_hwmod: fix wakeup enable/disable for consistency   Benoit Cousson
• [PATCH v2 7/7] OMAP2430: hwmod data: Use common dev_attr for i2c1 and i2c2   Benoit Cousson
• [PATCH v2 0/6] OMAP: hwmod core fix and cleanup for 2.6.38   Benoit Cousson
• [PATCH v2 1/6] OMAP2+: hwmod: Make omap_hwmod_register private and remove omap_hwmod_unregister   Benoit Cousson
• [PATCH v2 2/6] OMAP2+: hwmod: Mark functions used only during initialization with __init   Benoit Cousson
• [PATCH v2 3/6] OMAP2+: hwmod: Remove omap_hwmod_mutex   Benoit Cousson
• [PATCH v2 4/6] OMAP2+: hwmod: Disable clocks when hwmod enable fails   Benoit Cousson
• [PATCH v2 5/6] OMAP2+: hwmod: Add wakeup support for new OMAP4 IPs   Benoit Cousson
• [PATCH v2 6/6] OMAP4: hwmod data: Add SIDLE_SMART_WKUP modes to several IPs   Benoit Cousson
• [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling   Cousson, Benoit
• [GIT] pull request: DMA hwmod changes   Cousson, Benoit
• [PATCH v2 6/9] OMAP4: hwmod data: add system DMA   Cousson, Benoit
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.   Cousson, Benoit
• Last OMAP4 hwmod data cleanup for 2.6.38   Cousson, Benoit
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.   Cousson, Benoit
• [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment   Benoit Cousson
• [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment   Cousson, Benoit
• [PATCH 1/4] OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflex sysc   Benoit Cousson
• [PATCH 2/4] OMAP4: hwmod data: Move the smartreflex structures   Benoit Cousson
• [PATCH 3/4] OMAP4: hwmod data: Move the DMA structures   Benoit Cousson
• [PATCH 4/4] OMAP4: hwmod data: Fix alignment and end of line in structure fields   Benoit Cousson
• [PATCH 00/21] Updates for Tegra support in 2.6.38   Colin Cross
• [PATCH 01/21] ARM: tegra: irq: Rename gic pointers to avoid conflicts   Colin Cross
• [PATCH 02/21] ARM: gic: Add functions to save and restore gic state   Colin Cross
• [PATCH 03/21] ARM: gic: Export irq chip functions   Colin Cross
• [PATCH 04/21] ARM: tegra: Centralize macros to define debug uart base   Colin Cross
• [PATCH 05/21] ARM: tegra: Add api to control internal powergating   Colin Cross
• [PATCH 06/21] ARM: tegra: irqs: Update irq list   Colin Cross
• [PATCH 07/21] ARM: tegra: Add prototypes for subsystem suspend functions   Colin Cross
• [PATCH 08/21] ARM: tegra: clock: Suspend fixes, and add new clocks   Colin Cross
• [PATCH 09/21] ARM: tegra: pinmux: Add missing drive pingroups and fix suspend   Colin Cross
• [PATCH 10/21] ARM: tegra: timer: Add idle and suspend support to timers   Colin Cross
• [PATCH 11/21] ARM: tegra: irq: Add support for suspend wake sources   Colin Cross
• [PATCH 12/21] ARM: tegra: Add suspend and hotplug support   Colin Cross
• [PATCH 13/21] ARM: tegra: irq: Add set_wake and set_type support for suspend   Colin Cross
• [PATCH 14/21] ARM: tegra: irq: Add debugfs file to show wake irqs   Colin Cross
• [PATCH 15/21] ARM: tegra: irq: Implement retrigger   Colin Cross
• [PATCH 16/21] ARM: tegra: gpio: Add support for waking from suspend   Colin Cross
• [PATCH 17/21] ARM: tegra: add CPU_IDLE driver   Colin Cross
• [PATCH 18/21] ARM: tegra: iomap: Add missing devices, fix use of SZ_8, SZ_64   Colin Cross
• [PATCH 19/21] ARM: tegra: cpufreq: Disable cpufreq during suspend   Colin Cross
• [PATCH 20/21] ARM: tegra: Allow overriding arch_reset   Colin Cross
• [PATCH 21/21] ARM: tegra: dma: Fix critical data corruption bugs   Colin Cross
• [PATCH 02/21] ARM: gic: Add functions to save and restore gic state   Colin Cross
• [PATCH] [2.6.37] ARM: tegra: fix regression from addruart rewrite   Colin Cross
• [PATCH] [2.6.37] ARM: tegra: fix regression from addruart rewrite   Colin Cross
• [PATCH] [2.6.37] ARM: tegra: fix regression from addruart rewrite   Colin Cross
• [PATCH] ARM: tegra: timer: Separate clocksource and sched_clock   Colin Cross
• [PATCH] [ARM] tegra: Add i2c support   Colin Cross
• [PATCH 1/5] S5PC110: add MIPI-DSI system register definitions.   InKi Dae
• [PATCH 1/5] S5PC110: add MIPI-DSI system register definitions.   Inki Dae
• [PATCH 2/5] S5PC110: add MIPI-DSI clock.   Inki Dae
• [PATCH 3/5] S5PC110: add machine specific MIPI-DSI setup code.   Inki Dae
• [PATCH 4/5] S5PC110: add MIPI-DSI Controller driver.   Inki Dae
• [PATCH 5/5] S5PC110: add MIPI-DSI based sample lcd panel driver.   Inki Dae
• Cache maintenance on page table updates   Christoffer Dall
• Cache maintenance on page table updates   Christoffer Dall
• [RFC PATCH 06/18] ARM: LPAE: Introduce the 3-level page table format definitions   Christoffer Dall
• Question about ARM virtualization   Christoffer Dall
• [patch 3/3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Magnus Damm
• [patch 1/3] mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h   Magnus Damm
• [patch 3/3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Magnus Damm
• [patch 1/3] mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h   Magnus Damm
• [PATCH 00/02][RFC] ARM: Subarch IRQ handler macro support   Magnus Damm
• [PATCH 01/02][RFC] ARM: Introduce Subarch IRQ handler macros   Magnus Damm
• [PATCH 02/02][RFC] ARM: shmobile: Use Subarch IRQ handler for INTC   Magnus Damm
• [PATCH] ARM: Subarch IRQ handler macros V2   Magnus Damm
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Magnus Damm
• [PATCH 00/03] ARM: mach-shmobile: Initial SMP support   Magnus Damm
• [PATCH 01/03] ARM: mach-shmobile: SMP base support   Magnus Damm
• [PATCH 02/03] ARM: mach-shmobile: Enable SMP support   Magnus Damm
• [PATCH 03/03] ARM: mach-shmobile: sh73a0 SMP support   Magnus Damm
• [PATCH] ARM: Subarch IRQ handler macros V3   Magnus Damm
• [PATCH 01/03] ARM: mach-shmobile: SMP base support   Magnus Damm
• [PATCH] ARM: mach-shmobile: Clean up headsmp.S   Magnus Damm
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Jack Daniel
• [PATCH] ARM: Fix warning with gcc 4.5.1 in alignment fixup   George G. Davis
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   George G. Davis
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   George G. Davis
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   George G. Davis
• Forced HW_BREAKPOINT   Will Deacon
• Forced HW_BREAKPOINT   Will Deacon
• [PATCH] ARM: perf: use raw_spinlock_t for pmu_lock   Will Deacon
• Forced HW_BREAKPOINT   Will Deacon
• Forced HW_BREAKPOINT   Will Deacon
• [PATCH 00/11] ARM: hw_breakpoint: fixes and improvements (v3)   Will Deacon
• [PATCH 01/11] ARM: hw_breakpoint: ensure OS lock is clear before writing to debug registers   Will Deacon
• [PATCH 02/11] ARM: hw_breakpoint: reset control registers in hotplug path   Will Deacon
• [PATCH 03/11] ARM: hw_breakpoint: correct and simplify alignment fixup code   Will Deacon
• [PATCH 04/11] ARM: hw_breakpoint: disable preemption during debug exception handling   Will Deacon
• [PATCH 05/11] ARM: hw_breakpoint: don't advertise reserved breakpoints   Will Deacon
• [PATCH 06/11] ARM: hw_breakpoint: do not allocate new breakpoints with preemption disabled   Will Deacon
• [PATCH 07/11] ARM: hw_breakpoint: unify single-stepping code for watchpoints and breakpoints   Will Deacon
• [PATCH 08/11] ARM: hw_breakpoint: disallow per-cpu breakpoints without overflow handler   Will Deacon
• [PATCH 09/11] ARM: ptrace: fix style issue with hw_breakpoint interface   Will Deacon
• [PATCH 10/11] ARM: hw_breakpoint: fix warnings generated by sparse   Will Deacon
• [PATCH 11/11] ARM: hw_breakpoint: do not fail initcall if monitor mode is disabled   Will Deacon
• [PATCH 10/11] ARM: hw_breakpoint: fix warnings generated by sparse   Will Deacon
• [PATCH v3] ARM: vexpress: add support for multiple core tiles   Will Deacon
• [GIT PULL] ARM: hw_breakpoint: fixes and improvements   Will Deacon
• [PATCH v4] ARM: vexpress: add support for multiple core tiles   Will Deacon
• [PATCH v4] ARM: vexpress: add support for multiple core tiles   Will Deacon
• [RFC] Fixing CPU Hotplug for RealView Platforms   Will Deacon
• [RFC] Fixing CPU Hotplug for RealView Platforms   Will Deacon
• [RFC] Fixing CPU Hotplug for RealView Platforms   Will Deacon
• [PATCH v5] ARM: vexpress: add support for multiple core tiles   Will Deacon
• [GIT PULL] ARM: hw_breakpoint: fixes and improvements   Will Deacon
• [RFC 2/2] Selective MMU identity mapping for kexec   Will Deacon
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Will Deacon
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Will Deacon
• [GIT PULL][RESEND] ARM: hw_breakpoint: fixes and improvements   Will Deacon
• [RFC] Fixing CPU Hotplug for RealView Platforms   Will Deacon
• [PATCH 09/10] MCDE: Add build files and bus   Alex Deucher
• [PATCH 0/5] ARM: GIC: cleanup   Abhijeet Dharmapurikar
• [PATCH 0/5] ARM: GIC: cleanup   Abhijeet Dharmapurikar
• [PATCH] GIC: Assign correct flow handler type in set_type callback   Abhijeet Dharmapurikar
• [PATCH] GIC: Assign correct flow handler type in set_type callback   Abhijeet Dharmapurikar
• [PATCH] i.MX51: Full iomux support   Nguyen Dinh-R00091
• [PATCH] i.MX51: Full iomux support   Nguyen Dinh-R00091
• [PATCH 1/6] i2c/pxa2xx: Don't touch ISAR on X86   Ben Dooks
• [sodaville] [PATCH 1/6] i2c/pxa2xx: Don't touch ISAR on X86   Ben Dooks
• RFC: Dynamic hwcaps   Ben Dooks
• generic irq handler and stack?   Ben Dooks
• test   Ben Dooks
• test   Ben Dooks
• [PATCH 3/3] ARM: S3C64XX: Use chip_data to store the shift for EINTs   Ben Dooks
• [PATCH] ARM: GIC irq desciptor bug fix   Ben Dooks
• CpuFreq for mini2440   Ben Dooks
• [PATCH] s3c2410_udc: Add handling for S3C244X dual-packet mode   Ben Dooks
• [PATCH 1/3] Add a common struct clk   Ben Dooks
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Ben Dooks
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Ben Dooks
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Ben Dooks
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Ben Dooks
• [PATCH 0/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Ben Dooks
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Eric Dumazet
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Eric Dumazet
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Eric Dumazet
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Eric Dumazet
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Eric Dumazet
• [PATCH] sa1100: Fix platform device registration   Kristoffer Ericson
• [PATCH v6 1/2] ARM: mx5: dynamically allocate pwm devices   Fabio Estevam
• [PATCH v6 2/2] ARM: mx5: dynamically allocate imx-keypad devices   Fabio Estevam
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Fabio Estevam
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Fabio Estevam
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Fabio Estevam
• [PATCH 1/3] ARM: mx5: add support for the two watchdog modules   Fabio Estevam
• [PATCH 2/3] ARM: mx5: add watchdog clocks   Fabio Estevam
• [PATCH 3/3] ARM: mx5/mx51_babbage: Add watchdog support   Fabio Estevam
• [PATCH] watchdog: imx: use clk_get to acquire the watchdog clock   Fabio Estevam
• [PATCH 1/3] ARM: mx5: add support for the two watchdog modules   Fabio Estevam
• [PATCH v2] watchdog: imx: use clk_get to acquire the watchdog clock   Fabio Estevam
• [PATCH v2] watchdog: imx: use clk_get to acquire the watchdogclock   Fabio Estevam
• [PATCH 1/2] ARM: mx3/mx31_3ds: Add watchdog support   Fabio Estevam
• [PATCH 2/2] ARM: imx/mx27_3ds: Add watchdog support   Fabio Estevam
• [PATCH v6 1/2] ARM: mx5: dynamically allocate pwm devices   Fabio Estevam
• [PATCH] ARM: mx5: check for error in ioremap   Fabio Estevam
• ulpi_check_integrity returning error   Fabio Estevam
• ulpi_check_integrity returning error   Fabio Estevam
• ulpi_check_integrity returning error   Fabio Estevam
• ulpi_check_integrity returning error   Fabio Estevam
• [PATCH 1/2] ARM: mx3/mx31_3ds: Add support for OTG host mode   Fabio Estevam
• [PATCH 2/2] ARM: mx3/mx31_3ds: Add support for USB Host2 port   Fabio Estevam
• [PATCH 2/2] ARM i.MX53: Make MX53 EVK bootable   Fabio Estevam
• [PATCH v2 1/2] ARM: mx3/mx31_3ds: Add support for OTG host mode   Fabio Estevam
• [PATCH v2 2/2] ARM: mx3/mx31_3ds: Add support for USB Host2 port   Fabio Estevam
• [PATCH 1/3] ARM: mx3/mx35_3ds: Add USB OTG Host mode   Fabio Estevam
• [PATCH 2/3] ARM: imx/mx27_3ds: Add USB OTG support   Fabio Estevam
• [PATCH 3/3] ARM: imx/mx25_3ds: Add USB support   Fabio Estevam
• [PATCH 1/3] ARM: mx3/mx35_3ds: Add USB OTG Host mode   Fabio Estevam
• [PATCH v2 1/3] ARM: mx3/mx35_3ds: Add USB OTG Host mode   Fabio Estevam
• [PATCH v2 2/3] ARM: imx/mx27_3ds: Add USB OTG support   Fabio Estevam
• [PATCH v2 3/3] ARM: imx/mx25_3ds: Add USB support   Fabio Estevam
• [PATCH] video: imxfb: Fix the maximum value for yres   Fabio Estevam
• [PATCH v2] video: imxfb: Fix the maximum value for yres   Fabio Estevam
• [PATCH v3] video: imxfb: Fix the maximum value for yres   Fabio Estevam
• State of SMP / dual-core for MV78200?   Nils Faerber
• [PATCH 3/6] i2c/pxa2xx: Add PCI support for PXA I2C controller   Florian Fainelli
• [PATCH] AT91 USB Serial Device   Nicolas Ferre
• [PATCH v2] mach-at91: Support for gms board added   Nicolas Ferre
• [RFC PATCH] scatterlist: Initialize the dma_address field with invalid dma address   Nicolas Ferre
• [PATCH] at91: Refactor Stamp9G20 and PControl G20 board file   Nicolas Ferre
• [RFC PATCH] scatterlist: Initialize the dma_address field with invalid dma address   Nicolas Ferre
• [PATCH] MMC: Fix multiblock SDIO transfers in AT91 MCI   Nicolas Ferre
• [PATCH] MMC: Fix multiblock SDIO transfers in ATMEL MCI   Nicolas Ferre
• [PATCH] dmaengine: at_hdmac: fix buffer transfer size specification   Nicolas Ferre
• [PATCH] AT91: usb gadget: fix freeing irq in _udc_remove()   Nicolas Ferre
• [PATCH v2] USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()   Nicolas Ferre
• [PATCH] MTD: m25p80: add debugging trace in sst_write()   Nicolas Ferre
• [PATCH] MTD: m25p80: add debugging trace in sst_write()   Nicolas Ferre
• [PATCH] dmaengine: at_hdmac: use dma_address to program DMA hardware   Nicolas Ferre
• [PATCH 08/16] ARM: at91: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Nicolas Ferre
• [PATCH 0/3] ux500: Add support to boot from eMMC for U5500   Per Forlin
• [PATCH 1/3] ux500: Call prmcu_init only for u8500   Per Forlin
• [PATCH 2/3] ux500: Add eMMC support in U5500.   Per Forlin
• [PATCH 3/3] ux500: Add DMA support for U5500   Per Forlin
• [PATCH] ARM: colibri-pxa300: use correct SD detect pin   Bjørn Forsman
• [PATCH] ARM: colibri-pxa300: use correct SD detect pin   Bjørn Forsman
• [PATCH] ARM: colibri-pxa300: use correct SD detect pin   Bjørn Forsman
• [PATCH v3] ARM: kexec: Add call to non-crashing cores through IPI   Per Fransson
• mpcore watchdogs questions   Per Fransson
• mpcore watchdogs questions   Per Fransson
• [PATCH] sa1100: Fix platform device registration   Jochen Friedrich
• [PATCH 2.6.37 RESEND] sa1100: Fix platform device registration   Jochen Friedrich
• [PATCH] sa1100: Update platform device registration   Jochen Friedrich
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Mike Frysinger
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Mike Frysinger
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Mike Frysinger
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Mike Frysinger
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Mike Frysinger
• [PATCHv8 00/12] Contiguous Memory Allocator   Tomasz Fujak
• [PATCHv8 00/12] Contiguous Memory Allocator   Tomasz Fujak
• [PATCHv8 00/12] Contiguous Memory Allocator   Tomasz Fujak
• [PATCHv8 00/12] Contiguous Memory Allocator   Tomasz Fujak
• [PATCHv8 00/12] Contiguous Memory Allocator   Tomasz Fujak
• [PATCH v5] OMAP2+: PM: omap device: API's for handling mstandby mode   G, Manjunath Kondaiah
• [PATCH v5 00/14] OMAP: DMA: hwmod and DMA as platform device   G, Manjunath Kondaiah
• [PATCH v6] OMAP2+: PM: omap device: API's for handling mstandby mode   G, Manjunath Kondaiah
• [Patch v3] AM35xx: Craneboard: Add USB EHCI support   G, Manjunath Kondaiah
• [PATCH v7] OMAP2+: PM: omap device: API's for handling mstandby mode   G, Manjunath Kondaiah
• [PATCH v5 10/14] OMAP: DMA: Use DMA device attributes   G, Manjunath Kondaiah
• [PATCH v5 09/14] OMAP: DMA: Convert DMA library into platform driver   G, Manjunath Kondaiah
• [PATCH v7] OMAP2+: PM: omap device: API's for handling mstandby mode   G, Manjunath Kondaiah
• [PATCH v5 09/14] OMAP: DMA: Convert DMA library into platform driver   G, Manjunath Kondaiah
• [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device   G, Manjunath Kondaiah
• [PATCH v7] OMAP2+: PM: omap device: API's for handling mstandby mode   G, Manjunath Kondaiah
• [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device   G, Manjunath Kondaiah
• [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model   G, Manjunath Kondaiah
• [PATCH v1 4/9] OMAP2430: hwmod data: add system DMA   G, Manjunath Kondaiah
• [PATCH v1 3/9] OMAP2420: hwmod data: add system DMA   G, Manjunath Kondaiah
• [PATCH v1 3/9] OMAP2420: hwmod data: add system DMA]   G, Manjunath Kondaiah
• [PATCH v1 4/9] OMAP2430: hwmod data: add system DMA   G, Manjunath Kondaiah
• [PATCH v2 3/9] OMAP2420: hwmod data: add system DMA   G, Manjunath Kondaiah
• [PATCH v2 3/9] OMAP2420: hwmod data: add system DMA   G, Manjunath Kondaiah
• [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA   G, Manjunath Kondaiah
• [GIT] pull request: DMA hwmod changes   G, Manjunath Kondaiah
• [PATCH v2 6/9] OMAP4: hwmod data: add system DMA   G, Manjunath Kondaiah
• [GIT] pull request: DMA hwmod changes   G, Manjunath Kondaiah
• [GIT] pull request: DMA hwmod changes   G, Manjunath Kondaiah
• Last OMAP4 hwmod data cleanup for 2.6.38   G, Manjunath Kondaiah
• [PATCH] omap: remove dead wdt code in plat-omap/devices.c   Anand Gadiyar
• [PATCH RFC -next] omap: fix omap2plus_defconfig build   Anand Gadiyar
• [PATCH -next] arm: trivial: add missing argument to printk   Anand Gadiyar
• [PATCH -next] omap2430: hwmod: remove stray declaration   Anand Gadiyar
• [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER   Ben Gamari
• [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER   Ben Gamari
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Ben Gardiner
• [PATCH v2] ata: pata_at91.c bugfix for high master clock   Jeff Garzik
• [PATCH v2] ata: pata_at91.c bugfix for high master clock   Jeff Garzik
• [PATCH v6 0/7] nand prefetch-irq support and ecc layout chanage   Ghorai, Sukumar
• [PATCH 2/7] omap3: nand: configurable transfer type per board   Ghorai, Sukumar
• [PATCH v6 3/7] omap: gpmc: enable irq mode in gpmc   Ghorai, Sukumar
• [PATCH 1/7] omap3630: nand: fix device size to work in polled mode   Ghorai, Sukumar
• [PATCH v7 0/7] nand prefetch-irq support and ecc layout chanage   Sukumar Ghorai
• [PATCH v7 1/7] omap3630: nand: fix device size to work in polled mode   Sukumar Ghorai
• [PATCH v7 2/7] omap3: nand: configurable transfer type per board   Sukumar Ghorai
• [PATCH v7 3/7] omap: gpmc: enable irq mode in gpmc   Sukumar Ghorai
• [PATCH v7 4/7] omap3: nand: prefetch in irq mode support   Sukumar Ghorai
• [PATCH v7 5/7] omap3: nand: configurable fifo threshold to gain the throughput   Sukumar Ghorai
• [PATCH v7 6/7] omap3: nand: ecc layout select from board file   Sukumar Ghorai
• [PATCH v7 7/7] omap3: nand: making ecc layout as compatible with romcode ecc   Sukumar Ghorai
• [PATCH 1/2] Change the register name definitions for mc13783   Liam Girdwood
• [PATCH 1/2] Change the register name definitions for mc13783   Liam Girdwood
• [PATCHv3] support PMIC mc13892   Liam Girdwood
• [PATCHv3] support PMIC mc13892   Liam Girdwood
• [alsa-devel] [PATCH] ASoC: EP93xx: sampling rate range extended   Liam Girdwood
• [alsa-devel] [PATCH] ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code   Liam Girdwood
• [PATCHv3] support PMIC mc13892   Liam Girdwood
• [PATCH 1/2] Change the register name definitions for mc13783   Liam Girdwood
• [PATCHv3] support PMIC mc13892   Liam Girdwood
• [PATCH 0/9] regulators: Update ab8500 regulator driver   Liam Girdwood
• [PATCHv4] regulator: support PMIC mc13892   Liam Girdwood
• [PATCH 1/3] Change the register name definitions for mc13783   Liam Girdwood
• [PATCH] Change the register name definitions for mc13783   Liam Girdwood
• [alsa-devel] [PATCH 0/4] Modify configures to support Samsung ASoC dependancyless   Liam Girdwood
• [PATCH 06/15] ARM: mxs: Add timer support   Thomas Gleixner
• [PATCH 3/5] msm: timer: SMP timer support for msm   Thomas Gleixner
• [PATCH 3/5] msm: timer: SMP timer support for msm   Thomas Gleixner
• [PATCH v2 4/6] msm: timer: SMP timer support for msm   Thomas Gleixner
• [PATCH v2] mach-at91: Support for gms board added   Christian Glindkamp
• [PATCH] at91: Refactor Stamp9G20 and PControl G20 board file   Christian Glindkamp
• [PATCH] at91: Refactor Stamp9G20 and PControl G20 board file   Christian Glindkamp
• [PATCH] at91: Refactor Stamp9G20 and PControl G20 board file   Christian Glindkamp
• [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support   Thara Gopinath
• [PATCH v6 01/10] OMAP3: PM: Adding voltage driver support.   Thara Gopinath
• [PATCH v6 02/10] OMAP: Introduce voltage domain information in the hwmod structures   Thara Gopinath
• [PATCH v6 03/10] OMAP3: PM: Adding smartreflex driver support.   Thara Gopinath
• [PATCH v6 04/10] OMAP3: PM: Adding smartreflex device file.   Thara Gopinath
• [PATCH v6 05/10] OMAP3: PM: Adding smartreflex hwmod data   Thara Gopinath
• [PATCH v6 06/10] OMAP3: PM: Adding smartreflex class3 driver   Thara Gopinath
• [PATCH v6 07/10] OMAP3: PM: Adding T2 enabling of smartreflex support   Thara Gopinath
• [PATCH v6 08/10] OMAP3: PM: Register TWL4030 pmic info with the voltage driver.   Thara Gopinath
• [PATCH v6 09/10] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers   Thara Gopinath
• [PATCH v6 10/10] OMAP3: PM: Program correct init voltages for VDD1 and VDD2   Thara Gopinath
• [PATCH v5 0/5] OMAP4: Smartreflex and Voltage layer support   Thara Gopinath
• [PATCH v5 1/5] OMAP4: Register voltage PMIC parameters with the voltage layer   Thara Gopinath
• [PATCH v5 2/5] OMAP4: Adding voltage driver support   Thara Gopinath
• [PATCH v5 3/5] OMAP4: PM: Program correct init voltages for scalable VDDs   Thara Gopinath
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.   Thara Gopinath
• [PATCH v5 5/5] OMAP4: Smartreflex framework extensions   Thara Gopinath
• [PATCH 03/12] OMAP4: clock data: Add missing DPLL x2 clock nodes   Gopinath, Thara
• [PATCH v6 07/10] OMAP3: PM: Adding T2 enabling of smartreflex support   Gopinath, Thara
• [PATCH 5/7 v2] OMAP3: clocks: Update clock domain name for mcspi fck   Govindraj
• [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion   Govindraj
• [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion   Govindraj
• [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion   Govindraj
• [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion   Govindraj
• [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion   Govindraj.R
• [PATCH 1/7 v2] OMAP2420: hwmod data: Add McSPI   Govindraj.R
• [PATCH 2/7 v2] OMAP2430: hwmod data: Add McSPI   Govindraj.R
• [PATCH 3/7 v2] OMAP3: hwmod data: Add McSPI   Govindraj.R
• [PATCH 4/7 v2] OMAP4: hwmod data: Add McSPI   Govindraj.R
• [PATCH 5/7 v2] OMAP3: clocks: Update clock domain name for mcspi fck   Govindraj.R
• [PATCH 6/7 v2] OMAP: devices: Modify McSPI device to adapt to hwmod framework   Govindraj.R
• [PATCH 7/7 v2] OMAP: runtime: McSPI driver runtime conversion   Govindraj.R
• [PATCH] OMAP3: clocks: Update clock domain name for mcspi fck   Govindraj.R
• [patch 2/5] ulpi: handle ULPI_OTG_CTRL_CHRGVBUS   Igor Grinberg
• [PATCH 1/3] ARM: mx3/mx35_3ds: Add USB OTG Host mode   Igor Grinberg
• [PATCH 3/3] ARM: imx/mx25_3ds: Add USB support   Igor Grinberg
• [PATCH] ARM: colibri-pxa300: use correct SD detect pin   Igor Grinberg
• [patch 2/5] ulpi: handle ULPI_OTG_CTRL_CHRGVBUS   Igor Grinberg
• [PATCH v2] ide: at91_ide.c bugfix for high master clock   Stanislaw Gruszka
• [PATCH v2] ide: at91_ide.c bugfix for high master clock   Stanislaw Gruszka
• Driver for Hard Disk GPIOs   Simon Guinot
• [PATCH 19/22] ARM: CPU hotplug: move cpu_killed completion to core code   Vincent Guittot
• [PATCH 19/22] ARM: CPU hotplug: move cpu_killed completion to core code   Vincent Guittot
• [PATCH] ARM: ux500: Add debugfs support for powerdebug   Vincent Guittot
• [RFC] Fixing CPU Hotplug for RealView Platforms   Vincent Guittot
• [PATCH v2 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH 04/15] ARM: mxs: Add interrupt support   Shawn Guo
• [PATCH v2 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH v2 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH v2 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH 06/15] ARM: mxs: Add timer support   Shawn Guo
• [PATCH 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH v3 01/15] ARM: mxs: Add core definitions   Shawn Guo
• [PATCH v3 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Shawn Guo
• [PATCH v2 05/15] ARM: mxs: Add low-level debug UART support   Shawn Guo
• [PATCH v3 06/15] ARM: mxs: Add timer support   Shawn Guo
• [PATCH v2 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v2 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v2 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH v2 12/15] ARM: mxs: Dynamically allocate fec devices   Shawn Guo
• [PATCH v2 13/15] ARM: mxs: Add initial mx23evk support   Shawn Guo
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Shawn Guo
• [PATCH v3 15/15] ARM: mxs: Add build configuration for mxs   Shawn Guo
• [PATCH v3 01/15] ARM: mxs: Add core definitions   Shawn Guo
• [PATCH v3 06/15] ARM: mxs: Add timer support   Shawn Guo
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Shawn Guo
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Shawn Guo
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Shawn Guo
• [PATCH v2 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v2 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Shawn Guo
• [PATCH v2 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH v2 05/15] ARM: mxs: Add low-level debug UART support   Shawn Guo
• [PATCH v2 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Shawn Guo
• [PATCH v3 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Shawn Guo
• [PATCH v2 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Shawn Guo
• [PATCH v2 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Shawn Guo
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Shawn Guo
• [PATCH v4 01/15] ARM: mxs: Add core definitions   Shawn Guo
• [PATCH v3 02/15] ARM: mxs: Add helper definition and function   Shawn Guo
• [PATCH v4 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH v3 04/15] ARM: mxs: Add interrupt support   Shawn Guo
• [PATCH v3 05/15] ARM: mxs: Add low-level debug UART support   Shawn Guo
• [PATCH v4 06/15] ARM: mxs: Add timer support   Shawn Guo
• [PATCH v3 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v3 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v3 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH v2 10/15] ARM: mxs: Add static memory mapping   Shawn Guo
• [PATCH v2 11/15] ARM: mxs: Dynamically allocate duart devices   Shawn Guo
• [PATCH v3 12/15] ARM: mxs: Dynamically allocate fec devices   Shawn Guo
• [PATCH v3 13/15] ARM: mxs: Add initial mx23evk support   Shawn Guo
• [PATCH v3 14/15] ARM: mxs: Add initial mx28evk support   Shawn Guo
• [PATCH v3 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v3 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v5 00/15] ARM: mxs: Add initial support for MX23 and MX28   Shawn Guo
• [PATCH v5 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v5 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v5 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH v3 15/15] ARM: mxs: Add build configuration for mxs   Shawn Guo
• [PATCH v3 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v5 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v5 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v5 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v5 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v6 00/15] ARM: mxs: Add initial support for MX23 and MX28   Shawn Guo
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Shawn Guo
• [PATCH v6 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH v6 06/15] ARM: mxs: Add timer support   Shawn Guo
• [PATCH v6 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v6 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v6 15/15] ARM: mxs: Add build configuration for mxs   Shawn Guo
• [PATCH v6 00/15] ARM: mxs: Add initial support for MX23 andMX28   Shawn Guo
• [PATCH v6 00/15] ARM: mxs: Add initial support for MX23 andMX28   Shawn Guo
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Shawn Guo
• [PATCH 11/16] ARM: mxc: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Shawn Guo
• [PATCH v6 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v7 00/15] ARM: mxs: Add initial support for MX23 and MX28   Shawn Guo
• [PATCH v7 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH v7 04/15] ARM: mxs: Add interrupt support   Shawn Guo
• [PATCH v7 05/15] ARM: mxs: Add low-level debug UART support   Shawn Guo
• [PATCH v7 06/15] ARM: mxs: Add timer support   Shawn Guo
• [PATCH v7 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH v7 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v7 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH v7 13/15] ARM: mxs: Add initial mx23evk support   Shawn Guo
• [PATCH v7 14/15] ARM: mxs: Add initial mx28evk support   Shawn Guo
• [PATCH v7 13/15] ARM: mxs: Add initial mx23evk support   Shawn Guo
• [PATCH v7 05/15] ARM: mxs: Add low-level debug UART support   Shawn Guo
• [PATCH v7 05/15] ARM: mxs: Add low-level debug UART support   Shawn Guo
• [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28   Shawn Guo
• [PATCH v8 05/15] ARM: mxs: Add low-level debug UART support   Shawn Guo
• [PATCH v8 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH v8 13/15] ARM: mxs: Add initial mx23evk support   Shawn Guo
• [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28   Shawn Guo
• [PATCH] ARM: mxs: Change duart device to use amba-pl011   Shawn Guo
• [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28   Shawn Guo
• [PATCH] ARM: mxs: Change duart device to use amba-pl011   Shawn Guo
• [PATCH] ARM: mxs: Change duart device to use amba-pl011   Shawn Guo
• bug in PL011 console   Shawn Guo
• [PATCH 00/10] net/fec: add dual fec support for i.MX28   Shawn Guo
• [PATCH 01/10] net/fec: fix MMFR_OP type in fec_enet_mdio_write   Shawn Guo
• [PATCH 02/10] net/fec: remove the use of "index" which is legacy   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 04/10] net/fec: improve pm for better suspend/resume   Shawn Guo
• [PATCH 05/10] net/fec: add dual fec support for mx28   Shawn Guo
• [PATCH 06/10] ARM: mx28: update clocks for dual fec support   Shawn Guo
• [PATCH 07/10] ARM: mx28: add the second fec device registration   Shawn Guo
• [PATCH 08/10] ARM: mxs: add ocotp read function   Shawn Guo
• [PATCH 09/10] ARM: mx28: read fec mac address from ocotp   Shawn Guo
• [PATCH 10/10] ARM: mxs: add initial pm support   Shawn Guo
• [PATCH v2] ARM: mxs: Change duart device to use amba-pl011   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 06/10] ARM: mx28: update clocks for dual fec support   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 07/10] ARM: mx28: add the second fec device registration   Shawn Guo
• [PATCH 08/10] ARM: mxs: add ocotp read function   Shawn Guo
• [PATCH 09/10] ARM: mx28: read fec mac address from ocotp   Shawn Guo
• [PATCH 10/10] ARM: mxs: add initial pm support   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 09/10] ARM: mx28: read fec mac address from ocotp   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 08/10] ARM: mxs: add ocotp read function   Shawn Guo
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Shawn Guo
• [PATCH 09/10] ARM: mx28: read fec mac address from ocotp   Shawn Guo
• [PATCH 08/10] ARM: mxs: add ocotp read function   Shawn Guo
• [PATCH 10/10] ARM: mxs: add initial pm support   Shawn Guo
• [PATCH 08/10] ARM: mxs: add ocotp read function   Shawn Guo
• [PATCH 08/10] ARM: mxs: add ocotp read function   Shawn Guo
• [PATCH v3 1/8] ARM: mx5: use config to define boot related addresses   Shawn Guo
• [PATCH v2 2/2] ARM i.MX53: Make MX53 EVK bootable   Shawn Guo
• [PATCH v2] ARM: mxs: Change duart device to use amba-pl011   Shawn Guo
• [PATCH v3] ARM: mxs: Change duart device to use amba-pl011   Shawn Guo
• [PATCHv5 0/4] omap: iovmm - fixes for iovmm module   Guzman Lugo, Fernando
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Guzman Lugo, Fernando
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Guzman Lugo, Fernando
• [PATCH] scatterlist: define SG chain for arm architecture   Guzman Lugo, Fernando
• [PATCH] scatterlist: define SG chain for arm architecture   Guzman Lugo, Fernando
• [PATCH] ARM: Add Kconfig entry for SG chain support   Guzman Lugo, Fernando
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Guzman Lugo, Fernando
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Guzman Lugo, Fernando
• [PATCH 0/4] omap: iovmm - fixes for iovmm module   Guzman Lugo, Fernando
• [PATCHv6 4/4] omap: iommu - create new api to set valid da range   Guzman Lugo, Fernando
• [PATCHv7 0/4] omap: iovmm - fixes for iovmm module   Guzman Lugo, Fernando
• [PATCH] pl011: added clock management feature   Par-Gunnar HJALMDAHL
• Fix IXP4xx build   Krzysztof Halasa
• Fix IXP4xx build   Krzysztof Halasa
• [RFC][PATCH] ARM: Add initial hibernation support for Cortex A8 and A9   MyungJoo Ham
• [RFC][PATCH] Samsung SoC: Hibernation Initial Support   MyungJoo Ham
• [PATCH V2] s3c-fb: Add support S5PV310 FIMD   Jonghun Han
• [PATCHv2] make mc13783 regulator code generic   Sascha Hauer
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Sascha Hauer
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Sascha Hauer
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Sascha Hauer
• [PATCH] mx51: add support for FIQ on TZIC   Sascha Hauer
• [PATCH] ARM: imx: Add support for low power suspend on MX51.   Sascha Hauer
• [PATCH for -rc] dmaengine: i.MX SDMA fixes   Sascha Hauer
• [PATCH 1/2] dmaengine i.MX SDMA: initialize on module_init   Sascha Hauer
• [PATCH 2/2] dmaengine i.MX SDMA: protect channel0   Sascha Hauer
• [PATCH] watchdog: imx: use clk_get to acquire the watchdog clock   Sascha Hauer
• [PATCH v2] watchdog: imx: use clk_get to acquire the watchdog clock   Sascha Hauer
• [PATCH v2] watchdog: imx: use clk_get to acquire the watchdogclock   Sascha Hauer
• [PATCH 5/6] arm: mx50: add core functions support   Sascha Hauer
• [PATCHv3] support PMIC mc13892   Sascha Hauer
• [PATCH RFC] i.MX51 Framebuffer support   Sascha Hauer
• [PATCH 1/9] ARM i.MX51: Add ipu clock support   Sascha Hauer
• [PATCH 2/9] ARM i.MX51: rename IPU irqs   Sascha Hauer
• [PATCH 3/9] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 4/9] fb: export fb mode db table   Sascha Hauer
• [PATCH 5/9] Add i.MX5 framebuffer driver   Sascha Hauer
• [PATCH 6/9] ARM i.MX51: Add IPU device support   Sascha Hauer
• [PATCH 7/9] ARM i.MX5: Allow to increase max zone order   Sascha Hauer
• [PATCH 8/9] ARM i.MX5: increase dma consistent size for IPU support   Sascha Hauer
• [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support   Sascha Hauer
• [PATCH 2/2] dmaengine i.MX SDMA: protect channel0   Sascha Hauer
• [PATCH 1/2] Change the register name definitions for mc13783   Sascha Hauer
• [RFC] i.MX clock support   Sascha Hauer
• [PATCH 3/9] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 5/9] Add i.MX5 framebuffer driver   Sascha Hauer
• [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support   Sascha Hauer
• [PATCH v2] watchdog: imx: use clk_get to acquire the watchdog clock   Sascha Hauer
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Sascha Hauer
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Sascha Hauer
• [RFC] i.MX clock support   Sascha Hauer
• [PATCH 3/9] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 5/9] Add i.MX5 framebuffer driver   Sascha Hauer
• [PATCH v2] watchdog: imx: use clk_get to acquire the watchdog clock   Sascha Hauer
• [PATCH 19/24] ARM: mxc: update clock source registration   Sascha Hauer
• ulpi_check_integrity returning error   Sascha Hauer
• [RFC] i.MX clock support   Sascha Hauer
• [RFC] i.MX clock support   Sascha Hauer
• [PATCH 5/9] Add i.MX5 framebuffer driver   Sascha Hauer
• [PATCH RFC] i.MX51 Framebuffer support   Sascha Hauer
• [PATCH] i.MX51: Full iomux support   Sascha Hauer
• [PATCH 1/2] MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie (step 2)   Sascha Hauer
• [PATCH 2/2] ARM i.MX51: Full iomux support   Sascha Hauer
• [RFC] i.MX clock support   Sascha Hauer
• [PATCH 11/16] ARM: mxc: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Sascha Hauer
• [PATCH] i.MX51: Full iomux support   Sascha Hauer
• [PATCH] i.MX51: Full iomux support   Sascha Hauer
• IMX SPI - 17-24 bit bug and >32 bit support.   Sascha Hauer
• [PATCH v2] i.MX51 Framebuffer support   Sascha Hauer
• [PATCH 1/9] ARM i.MX51: Add ipu clock support   Sascha Hauer
• [PATCH 2/9] ARM i.MX51: rename IPU irqs   Sascha Hauer
• [PATCH 3/9] Add a mfd IPUv3 driver   Sascha Hauer
• [PATCH 4/9] fb: export fb mode db table   Sascha Hauer
• [PATCH 5/9] Add i.MX5 framebuffer driver   Sascha Hauer
• [PATCH 6/9] ARM i.MX51: Add IPU device support   Sascha Hauer
• [PATCH 7/9] ARM i.MX5: Allow to increase max zone order   Sascha Hauer
• [PATCH 8/9] ARM i.MX5: increase dma consistent size for IPU support   Sascha Hauer
• [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support   Sascha Hauer
• [patch 1/5] ehci-mxc: Enable vbus later   Sascha Hauer
• [PATCH] msm: rmnet: msm rmnet smd virtual ethernet driver   Stephen Hemminger
• [PATCH] msm: rmnet: msm rmnet smd virtual ethernet driver   Stephen Hemminger
• [PATCH] msm: rmnet: msm rmnet smd virtual ethernet driver   Stephen Hemminger
• Cannot detect SATA disks w/ CONFIG_SATA_PMP w/o actually using SATA multiplier   Tejun Heo
• Cannot detect SATA disks w/ CONFIG_SATA_PMP w/o actually using SATA multiplier   Tejun Heo
• [PATCH v2 2/3] ARM: timer-sp: support timer clock freq other than 1MHz   Rob Herring
• [PATCH] OMAP: PM debug: fix wake-on-timer debugfs dependency   Kevin Hilman
• [PATCH] OMAP: PM debug: fix wake-on-timer debugfs dependency   Kevin Hilman
• [PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device   Kevin Hilman
• [PATCH] arm: omap2: io: fix clk_get() error check   Kevin Hilman
• [PATCH] OMAP2+: PM/serial: fix console semaphore acquire during suspend   Kevin Hilman
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Kevin Hilman
• [PATCH] arm: plat-omap: counter_32k: Fix build error due to IS_ERR   Kevin Hilman
• [PATCH 0/8] OMAP2+: hwmod core upgrades for 2.6.38: first set   Kevin Hilman
• [PATCH] omap1: pm_bus: Fix compilation warning.   Kevin Hilman
• [PATCH v2] OMAP2+: PM/serial: fix console semaphore acquire during suspend   Kevin Hilman
• [PATCH 00/14] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part one   Kevin Hilman
• Problem with sram size on OMAP1611 (OSK)   Kevin Hilman
• [PATCH] OMAP1: SRAM: fix size for OMAP1611 SoCs   Kevin Hilman
• [PATCH 11/14] OMAP4: PRCM: reorganize existing OMAP4 PRCM header files   Kevin Hilman
• [PATCH v3] OMAP2+: PM/serial: fix console semaphore acquire during suspend   Kevin Hilman
• [PATCH 05/11] OMAP2+: clockdomains: split the clkdm hwsup enable/disable function   Kevin Hilman
• [PATCH v3] OMAP2+: PM/serial: fix console semaphore acquire during suspend   Kevin Hilman
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Kevin Hilman
• [PATCH v2 0/2] OMAP: I2C and UART device name cleanup   Kevin Hilman
• [PATCH] OMAP: device: make rt_va easily avaialable to drivers   Kevin Hilman
• [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver   Kevin Hilman
• [PATCH 13/11] OMAP2+: GPIO: ensure bank wakeups are enabled by default   Kevin Hilman
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Kevin Hilman
• [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver   Kevin Hilman
• [PATCH] OMAP2+: omap_hwmod: fix wakeup enable/disable for consistency   Kevin Hilman
• [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver   Kevin Hilman
• [PATCH 13/11] OMAP2+: GPIO: ensure bank wakeups are enabled by default   Kevin Hilman
• [PATCH v2 0/8] OMAP3&4: clock data: Fixes and add new clocks nodes   Kevin Hilman
• [PATCH 0/5] OMAP4: hwmod data fixes and update   Kevin Hilman
• [PATCH v7 11/12] davinci: add tnetv107x evm backlight device   Kevin Hilman
• [PATCH v7 01/12] misc: add driver for sequencer serial port   Kevin Hilman
• [PATCH v7 00/12] tnetv107x ssp drivers   Kevin Hilman
• [PATCH 1/5] OMAP4: hwmod data: Fix hwmod entries order   Kevin Hilman
• [PATCH 6/6] omap2+: Initialize serial ports for wake-up events for n8x0   Kevin Hilman
• [PATCH 1/5] OMAP4: PM: Use the lowpwrstatechange feature on OMAP4   Kevin Hilman
• [PATCH 2/5] OMAP4: PM: Do not assume clkdm supports hw transitions   Kevin Hilman
• [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain   Kevin Hilman
• [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one   Kevin Hilman
• [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device   Kevin Hilman
• [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model   Kevin Hilman
• [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model   Kevin Hilman
• [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device   Kevin Hilman
• [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device   Kevin Hilman
• [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion   Kevin Hilman
• [PATCH 1/5] OMAP4: PM: Use the lowpwrstatechange feature on OMAP4   Kevin Hilman
• [PATCH v2 1/5] OMAP4: PM: Use the low-power state change feature on OMAP4   Kevin Hilman
• [PATCH v1] OMAP: GPIO: Correct IP version message during boot   Kevin Hilman
• [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion   Kevin Hilman
• [PATCH 0/7 v5] OMAP3: clean up ASM sleep code   Kevin Hilman
• [PATCH 1/3] OMAP2+: powerdomain: add API to get context loss count   Kevin Hilman
• [PATCH 2/3] OMAP: PM: implement context loss count APIs   Kevin Hilman
• [PATCH 3/3] OMAP: PM noop: implement context loss count for non-omap_devices   Kevin Hilman
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Kevin Hilman
• [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2   Kevin Hilman
• [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode   Kevin Hilman
• [PATCH v1] OMAP: GPIO: Correct IP version message during boot   Kevin Hilman
• [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode   Kevin Hilman
• [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support   Kevin Hilman
• [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support   Kevin Hilman
• [PATCH 03/40] ARM: davinci: update clock source registration   Kevin Hilman
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Kevin Hilman
• [GIT PULL] misc. OMAP PM core updates for 2.6.38   Kevin Hilman
• [GIT PULL] OMAP OPP support for 2.6.38   Kevin Hilman
• [GIT PULL] OMAP SmartReflex/voltage core for 2.6.38   Kevin Hilman
• [PATCH v5 1/2] davinci: am18x/da850/omap-l138: add support for higher speed grades   Kevin Hilman
• [GIT PULL] OMAP SmartReflex/voltage core for 2.6.38   Kevin Hilman
• [PATCH v6 07/10] OMAP3: PM: Adding T2 enabling of smartreflex support   Kevin Hilman
• [PATCH v1] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Kevin Hilman
• [PATCH v6 01/10] OMAP3: PM: Adding voltage driver support.   Kevin Hilman
• [GIT PULL v2] OMAP SmartReflex/voltage core for 2.6.38   Kevin Hilman
• [PATCH] OMAP2: PM: fix compile error when !CONFIG_SUSPEND   Kevin Hilman
• [PATCH v1] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Kevin Hilman
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.   Kevin Hilman
• [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment   Kevin Hilman
• [GIT PULL] davinci updates for 2.6.38   Kevin Hilman
• [PATCHv7 06/10] mm: MIGRATE_CMA migration type added   KAMEZAWA Hiroyuki
• [PATCHv7 08/10] mm: cma: Contiguous Memory Allocator added   KAMEZAWA Hiroyuki
• [PATCHv7 08/10] mm: cma: Contiguous Memory Allocator added   KAMEZAWA Hiroyuki
• [PATCH] msm: trout: add keypad support   Arve Hjønnevåg
• ks8695_gettimeoffset   Dick Hollenbeck
• ks8695_gettimeoffset   Dick Hollenbeck
• ks8695_gettimeoffset   Dick Hollenbeck
• [patch v4 0/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM (update)   Simon Horman
• [patch 0/3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Simon Horman
• [patch 1/3] mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h   Simon Horman
• [patch 2/3] mmc, sh: Remove sh_mmcif_boot_slurp()   Simon Horman
• [patch 3/3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Simon Horman
• [patch 3/3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Simon Horman
• [patch 3/3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Simon Horman
• [patch 1/3] mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h   Simon Horman
• [patch 3/3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Simon Horman
• [patch 3/3 v2] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Simon Horman
• [patch v3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Simon Horman
• [PATCH] [rfc] ARM: mach-shmobile: mackerel: Add zboot support   Simon Horman
• [PATCH] rfc v2: ARM: mach-shmobile: mackerel: Add zboot support   Simon Horman
• [PATCH] rfc v2: ARM: mach-shmobile: mackerel: Add zboot support   Simon Horman
• [PATCH] rfc v3: ARM: mach-shmobile: mackerel: Add zboot support   Simon Horman
• [PATCH] rfc v1: ARM: mach-shmobile: mackerel: Add zboot MMCIF support   Simon Horman
• [PATCH] ARM: mach-shmobile: SCIF port for earlyprintk when using zboot   Simon Horman
• [PATCH] rfc v3: ARM: mach-shmobile: mackerel: Add zboot support   Simon Horman
• [PATCH] rfc v3: ARM: mach-shmobile: mackerel: Add zboot support   Simon Horman
• [PATCH] rfc v3: ARM: mach-shmobile: mackerel: Add zboot support   Simon Horman
• [PATCH] [patch v2] ARM: mach-shmobile: mackerel: Add zboot MMCIF support   Simon Horman
• [PATCH] [patch v3] ARM: mach-shmobile: mackerel: Add zboot MMCIF support   Simon Horman
• [patch v3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Simon Horman
• [PATCH] mx51: add support for FIQ on TZIC   Peter Horton
• [PATCH] mx51: add SSI3   Peter Horton
• [PATCH] mx51: add support for FIQ on TZIC   Peter Horton
• [PATCH] mx51: support FIQ on TZIC, revised   Peter Horton
• [PATCH RFC] i.MX51 Framebuffer support   Peter Horton
• [PATCH] i.MX51: Full iomux support   Peter Horton
• [PATCH] leds/h1940: Use gpiolib for latch access / fix build failure   Peter Huewe
• [PATCH] [ARM] Add missing include "asm/memory.h"   Peter Huewe
• [PATCH v6] OMAP2+: PM: omap device: API's for handling mstandby mode   Adrian Hunter
• [PATCH v6] OMAP2+: PM: omap device: API's for handling mstandby mode   Adrian Hunter
• [PATCH 1/2] OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanoseconds   Adrian Hunter
• [PATCH 2/2] OMAP2/3: OneNAND: add 104MHz support   Adrian Hunter
• [PATCH 4/7] OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanoseconds   Adrian Hunter
• [PATCH 0/2] Add 104MHz support for OMAP OneNAND   Adrian Hunter
• [PATCH 1/2] OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanoseconds   Adrian Hunter
• [PATCH 2/2] OMAP2/3: OneNAND: add 104MHz support   Adrian Hunter
• [PATCH] arm/ixp4xx: Rename FREQ macro to avoid collisions   Ben Hutchings
• [PATCH 01/20] mfd/ab8500: remove spi support   Sundar R IYER
• [PATCH 13/20] mfd/tc3589x: add suspend/resume support   Sundar R IYER
• [PATCH] omap: pandora: fix wifi support   Grazvydas Ignotas
• [PATCH] ARM: perf: use raw_spinlock_t for pmu_lock   Jamie Iles
• [PATCH] ARM: perf: use raw_spinlock_t for pmu_lock   Jamie Iles
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Jamie Iles
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Jamie Iles
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Jamie Iles
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Jamie Iles
• ARM: add initial support for Picochip picoXcell SoC   Jamie Iles
• [PATCH] ARM: Fix warning with gcc 4.5.1 in alignment fixup   Jamie Iles
• [PATCH 2/3] ASoC: CS4271 codec support   Jamie Iles
• Linux kernel compilation failed with error: FPA is unsupported in the AAPCS   Jamie Iles
• [PATCH 2/3] ASoC: CS4271 codec support   Jamie Iles
• [RFC PATCH 01/13] picoxcell: add support for picoXcell   Jamie Iles
• [RFC PATCH 02/13] picoxcell: add support for AXI bus snoopers   Jamie Iles
• [RFC PATCHv2] picoxcell: add support for the system timers   Jamie Iles
• [RFC PATCH 06/13] picoxcell: add support for system clks   Jamie Iles
• [PATCH 8/8] arm: omap: add minimal support for RM-680   Jamie Iles
• [PATCH 8/8] arm: omap: add minimal support for RM-680   Jamie Iles
• [PATCH v3 00/14] ARM: add initial support for Picochip picoXcell SoC   Jamie Iles
• [PATCH v3 01/14] picoxcell: add support for picoXcell   Jamie Iles
• [PATCH v3 02/14] picoxcell: add support for AXI bus snoopers   Jamie Iles
• [PATCH v3 03/14] picoxcell: add support for the system timers   Jamie Iles
• [PATCH v3 04/14] picoxcell: add a pin muxing infrastructure   Jamie Iles
• [PATCH v3 05/14] picoxcell: add gpio infrastructure   Jamie Iles
• [PATCH v3 06/14] picoxcell: add support for system clks   Jamie Iles
• [PATCH v3 07/14] picoxcell: add common SoC devices   Jamie Iles
• [PATCH v3 08/14] picoxcell: add cpufreq support   Jamie Iles
• [PATCH v3 09/14] picoxcell: add support for pm   Jamie Iles
• [PATCH v3 10/14] picoxcell: add chained GPIO IRQ handlers   Jamie Iles
• [PATCH v3 11/14] picoxcell: add support for pc3x2 devices   Jamie Iles
• [PATCH v3 12/14] picoxcell: add support for pc3x3 devices   Jamie Iles
• [PATCH v3 13/14] picoxcell: add support for the onchip SRAM   Jamie Iles
• [PATCH v3 14/14] picoxcell: add support for the PC7302 development board   Jamie Iles
• [PATCH 1/2] ARM: convert dma-mapping to asm-generic API   Jamie Iles
• [PATCH 2/2] ARM: use cached memory in dma_alloc_coherent() if possible   Jamie Iles
• [PATCH 2/2] ARM: use cached memory in dma_alloc_coherent() if possible   Jamie Iles
• [PATCH 1/2] ARM: convert dma-mapping to asm-generic API   Jamie Iles
• [PATCH 2/2] ARM: use cached memory in dma_alloc_coherent() if possible   Jamie Iles
• [PATCH 1/2] ARM: convert dma-mapping to asm-generic API   Jamie Iles
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Jamie Iles
• [PATCH] ARM: S5PV310: Implement kernel timers using MCT   Jamie Iles
• [PATCH] ARM: S5PV310: Implement kernel timers using MCT   Jamie Iles
• [PATCH 00/20] ux500: platform data, TC3589x keypad driver   Sundar Iyer
• [PATCH 01/20] mfd/ab8500: remove spi support   Sundar Iyer
• [PATCH 02/20] mach-ux500: deprecate spi support for ab8500   Sundar Iyer
• [PATCH 03/20] mach-ux500: move keymaps to new file   Sundar Iyer
• [PATCH 04/20] nomadik-gpio: allow sleep mode dir/pull to differ from normal mode   Sundar Iyer
• [PATCH 05/20] mach-ux500: add STMPE1601 platform data   Sundar Iyer
• [PATCH 06/20] mfd/tc35892: rename tc35892 header to tc3589x   Sundar Iyer
• [PATCH 07/20] mfd/tc35892: rename tc35892 core driver to tc3589x   Sundar Iyer
• [PATCH 08/20] mfd/tc3589x: rename tc35892 structs/registers to tc359x   Sundar Iyer
• [PATCH 09/20] mfd/tc3589x: add block identifier for multiple child devices   Sundar Iyer
• [PATCH 10/20] input/tc3589x: add tc3589x keypad support   Sundar Iyer
• [PATCH 11/20] mfd/tc3589x: fix random interrupt misses   Sundar Iyer
• [PATCH 12/20] mfd/tc3589x: undo gpio module reset during chip init   Sundar Iyer
• [PATCH 13/20] mfd/tc3589x: add suspend/resume support   Sundar Iyer
• [PATCH 14/20] plat-nomadik/gpio: add expander gpio pins enumeration   Sundar Iyer
• [PATCH 15/20] mach-ux500: add touchscreen interfaces platform data   Sundar Iyer
• [PATCH 16/20] i2c/nomadik: add adapter name for updated sanity checkings   Sundar Iyer
• [PATCH 17/20] mach-ux500: add TC35893 keypad platform data   Sundar Iyer
• [PATCH 18/20] mach-ux500: explicit enable MTU TCR in the kernel   Sundar Iyer
• [PATCH 19/20] mach-ux500: clean up checkpatch spits   Sundar Iyer
• [PATCH 20/20] i2c/nomadik: some checkpatch warnings   Sundar Iyer
• [PATCH] mach-ux500: fix ux500 build error   Sundar Iyer
• [PATCH] support PMIC mc13892   David Jander
• [PATCH v3] video: imxfb: Fix the maximum value for yres   Janorkar, Mayuresh
• PXA270 Random Hangs at Low Core Freq   Robert Jarzmik
• [PATCH 5/9] Add i.MX5 framebuffer driver   Chen Jie-B02280
• [PATCH 5/9] Add i.MX5 framebuffer driver   Chen Jie-B02280
• [PATCH] [2.6.37] ARM: tegra: fix regression from addruart rewrite   Olof Johansson
• [PATCH] [2.6.37] ARM: tegra: fix regression from addruart rewrite   Olof Johansson
• [PATCH 33/40] ARM: tegra: convert sched_clock() to use new infrastructure   Olof Johansson
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Olof Johansson
• [PATCH 0/9] regulators: Update ab8500 regulator driver   Bengt Jonsson
• [PATCH 1/9] regulators: Moved define for number of regulators in ab8500   Bengt Jonsson
• [PATCH 2/9] regulators: Fixed errors in ab8500 register mapping   Bengt Jonsson
• [PATCH 3/9] regulators: Clean out unused code in ab8500 regulators   Bengt Jonsson
• [PATCH 4/9] regulators: Added ab8500 v2 support   Bengt Jonsson
• [PATCH 5/9] regulators: Updated ab8500 variable names, macro names and comments   Bengt Jonsson
• [PATCH 6/9] regulators: Modified ab8500 error handling   Bengt Jonsson
• [PATCH 7/9] regulators: Added verbose debug messages to ab8500 regulators   Bengt Jonsson
• [PATCH 8/9] regulators: Removed macros for initialization of ab8500 regulators   Bengt Jonsson
• [PATCH 9/9] mach-ux500: Updated and connected ab8500 regulator board configuration   Bengt Jonsson
• Linux kernel compilation failed with error: FPA is unsupported in the AAPCS   Prasad Joshi
• Linux kernel compilation failed with error: FPA is unsupported in the AAPCS   Prasad Joshi
• [PATCH v4 3/6] ARM: U8500 core machine support   Srinidhi KASAGAR
• [PATCH v5 0/3] OMAP2/3: DMA: FIFO drain errata fixes   Greg KH
• [PATCH v3 0/4] Introduce hardware spinlock framework   Greg KH
• [PATCH v3 0/4] Introduce hardware spinlock framework   Greg KH
• [PATCH V2] ARM: SAMSUNG: Add support for clock debugging through debug-fs interface   Amit Daniel Kachhap
• [PATCH] arm/income pxa270: enable backlight when pwm_bl is a module   Nicolas Kaiser
• [RFC v2 1/8] TILER-DMM: DMM-PAT driver for TI TILER   Kanigeri, Hari
• [RFC v2 1/8] TILER-DMM: DMM-PAT driver for TI TILER   Kanigeri, Hari
• [RFC v2 1/8] TILER-DMM: DMM-PAT driver for TI TILER   Hari Kanigeri
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Kanigeri, Hari
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Kanigeri, Hari
• [PATCH] OMAP: device: make rt_va easily avaialable to drivers   Hari Kanigeri
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Kanigeri, Hari
• [PATCH v3 5/5] OMAP: mailbox: add omap_device latency information   Kanigeri, Hari
• [PATCHv7 0/4] omap: iovmm - fixes for iovmm module   Kanigeri, Hari
• [PATCH 0/5] MSM RPC Patches   Kanigeri, Hari
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Kanigeri, Hari
• [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling   Kanigeri, Hari
• [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling   Kanigeri, Hari
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Saravana Kannan
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Saravana Kannan
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Saravana Kannan
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Saravana Kannan
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Saravana Kannan
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Saravana Kannan
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Saravana Kannan
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Saravana Kannan
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Saravana Kannan
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Srinidhi Kasagar
• [PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [PATCH 1/2] Add a common struct clk   Jeremy Kerr
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [PATCH 0/2] Common struct clk implementation, v8   Jeremy Kerr
• [PATCH 1/2] Add a common struct clk   Jeremy Kerr
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [PATCH 0/2] Common struct clk implementation, v8   Jeremy Kerr
• [PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [PATCH 1/2] Add a common struct clk   Jeremy Kerr
• [PATCH 2/2] clk: Generic support for fixed-rate clocks   Jeremy Kerr
• [PATCH v2] ARM: S3C2416: Add platform helpers for setup SDHCI   Yauhen Kharuzhy
• [PATCH v2] ARM: S3C2416: Add platform helpers for setup SDHCI   Yauhen Kharuzhy
• [PATCH] ARM S3C24XX: Fix compilation of PM code for S3C2416   Yauhen Kharuzhy
• [PATCH 01/10] SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST   Yauhen Kharuzhy
• [PATCH 06/10] ARM S3C24XX: Compile NAND device definition for SMDK boards   Yauhen Kharuzhy
• [PATCH v4] ARM: s3c244x: Fix mess with gpio {set, get}_pull callbacks   Vasily Khoruzhick
• [PATCH v6] ARM: s3c244x: Fix mess with gpio {set,get}_pull callbacks   Vasily Khoruzhick
• [PATCH v5] ARM: s3c244x: Fix mess with gpio {set, get}_pull callbacks   Vasily Khoruzhick
• [PATCH v5] ARM: s3c244x: Fix mess with gpio {set, get}_pull callbacks   Vasily Khoruzhick
• [PATCH 2/2] h1940-leds: Fix compile issue introduced by latch-related changes   Vasily Khoruzhick
• [PATCH] s3c2410_udc: Add handling for S3C244X dual-packet mode   Vasily Khoruzhick
• [PATCH] ARM: S3C2442: rx1950: Retain LEDs state in suspend   Vasily Khoruzhick
• [PATCH] leds/h1940: Use gpiolib for latch access / fix build failure   Vasily Khoruzhick
• [PATCH] s3c2410_udc: Add handling for S3C244X dual-packet mode   Vasily Khoruzhick
• [PATCH RESEND v3] ARM: s3c2442: Setup gpio {set, get}_pull callbacks   Kukjin Kim
• [PATCH v4] ARM: s3c244x: Fix mess with gpio {set,get}_pull callbacks   Kukjin Kim
• [PATCH v5] ARM: s3c244x: Fix mess with gpio {set,get}_pull callbacks   Kukjin Kim
• [PATCH 00/54] ARM irq_data conversion.   Kukjin Kim
• [PATCH V2] ARM: SAMSUNG: Add support for clock debugging through debug-fs interface   Kukjin Kim
• [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods   Kukjin Kim
• [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods   Kukjin Kim
• [PATCH 2/3] ARM: S3C64XX: Convert S3C64xx irq-eint to use new irq_ methods   Kukjin Kim
• [PATCH 3/3] ARM: S3C64XX: Use chip_data to store the shift for EINTs   Kukjin Kim
• [PATCH 00/54] ARM irq_data conversion.   Kukjin Kim
• [PATCH v5] ARM: s3c244x: Fix mess with gpio {set,get}_pull callbacks   Kukjin Kim
• [PATCH 3/3] ARM: S3C64XX: Use chip_data to store the shift for EINTs   Kukjin Kim
• [PATCH 0/4] ARM: S5P: Add platform support for MIPI-CSI2 devices   Kukjin Kim
• [PATCH 1/4] mach-s5pv210: Add platform definitions for mipi-csis   Kukjin Kim
• [PATCH 2/4] mach-s5pv310: Add resource definitions for mipi-csis   Kukjin Kim
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Kukjin Kim
• [PATCH 1/4] mach-s5pv210: Add platform definitions for mipi-csis   Kukjin Kim
• [PATCH 1/4] mach-s5pv210: Add platform definitions for mipi-csis   Kukjin Kim
• [PATCH V2 0/2] ARM: SAMSUNG: Add Support Power Domain Control   Kukjin Kim
• [PATCH V2 1/2] ARM: SAMSUNG: Add support for Power Domain control   Kukjin Kim
• [PATCH V2 2/2] ARM: S5PV310: Add support Power Domain   Kukjin Kim
• [PATCH v5] ARM: s3c244x: Fix mess with gpio {set, get}_pull callbacks   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.37-rc4   Kukjin Kim
• [PATCH 1/2] ARM: SAMSUNG: Convert irq-uart to use new irq_ functions   Kukjin Kim
• [PATCH 2/2] ARM: SAMSUNG: Convert irq-vic-timer to irq_ functions   Kukjin Kim
• [PATCH 40/54] ARM: Samsung SoCs: irq_data conversion.   Kukjin Kim
• [PATCH 01/10] SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST   Kukjin Kim
• [PATCH 06/10] ARM S3C24XX: Compile NAND device definition for SMDK boards   Kukjin Kim
• [PATCH 02/10] ARM S3C2416: Add address map and clock definitions for HSMMC0   Kukjin Kim
• [PATCH 01/10] SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST   Kukjin Kim
• [PATCH v2] ARM: S3C2416: Add platform helpers for setup SDHCI   Kukjin Kim
• [PATCH] ARM S3C24XX: Fix compilation of PM code for S3C2416   Kukjin Kim
• [PATCH for 2.6.37] S5PV210: update MAX8998 platform data to get rid of WARN()   Kukjin Kim
• [PATCH 0/4 v2] ARM: S5P: Add platform support for MIPI-CSI slave devices   Kukjin Kim
• [PATCH 4/4 v2] ARM: S5PV210: Add clock definition for MIPI-CSIS DPHY   Kukjin Kim
• [PATCH 13/24] ARM: s5pv310: update clock source registration   Kukjin Kim
• [PATCH 40/54] ARM: Samsung SoCs: irq_data conversion.   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.37-rc7   Kukjin Kim
• [PATCH 00/17] Samsung: Enable Audio Devices   Kukjin Kim
• [PATCH 06/17] ARM: S5P64X0: Segregate audio devices   Kukjin Kim
• [PATCH 04/17] ARM: S5P6450: Define clocks for I2S   Kukjin Kim
• [PATCH 00/17] Samsung: Enable Audio Devices   Kukjin Kim
• [PATCH] S5PC210: Universal: SDHCI devices support   Kukjin Kim
• [PATCH 40/54] ARM: Samsung SoCs: irq_data conversion.   Kukjin Kim
• [PATCH 00/17] Samsung: Enable Audio Devices   Kukjin Kim
• [PATCH] ARM: S5PV310: Implement kernel timers using MCT   Kukjin Kim
• [PATCH] ARM: S5PV310: Implement kernel timers using MCT   Kukjin Kim
• [PATCH] ARM: S5PV310: Implement kernel timers using MCT   Kukjin Kim
• [PATCH 1/5] S5PC110: add MIPI-DSI system register definitions.   Kukjin Kim
• [PATCH 1/5] S5PC110: add MIPI-DSI system register definitions.   Kukjin Kim
• [PATCH 1/5] S5PC110: add MIPI-DSI system register definitions.   Kukjin Kim
• [PATCH 2/5] S5PC110: add MIPI-DSI clock.   Kukjin Kim
• [PATCH 3/5] S5PC110: add machine specific MIPI-DSI setup code.   Kukjin Kim
• [PATCH 4/5] S5PC110: add MIPI-DSI Controller driver.   Kukjin Kim
• [PATCH 5/5] S5PC110: add MIPI-DSI based sample lcd panel driver.   Kukjin Kim
• [PATCH v5 1/2] ARM: mx5: dynamically allocate pwm devices   Uwe Kleine-König
• [PATCH 10/54] ARM: bcmring: irq_data conversion.   Uwe Kleine-König
• [PATCH 33/54] ARM: ns9xxx: irq_data conversion.   Uwe Kleine-König
• [patch 1/2] imx51: fix gpiolib support   Uwe Kleine-König
• [PATCH v2 03/15] ARM: mxs: Add reset routines   Uwe Kleine-König
• [PATCH] add clock debug information for imx51 babbage   Uwe Kleine-König
• [PATCH] Kconfig: add new symbol MIGHT_HAVE_PCI   Uwe Kleine-König
• [PATCH] Kconfig: add new symbol MIGHT_HAVE_PCI   Uwe Kleine-König
• [PATCH v2 03/15] ARM: mxs: Add reset routines   Uwe Kleine-König
• [PATCH] add clock debug information for imx51 babbage   Uwe Kleine-König
• [PATCH v2 03/15] ARM: mxs: Add reset routines   Uwe Kleine-König
• mounting ext3 with readonly but there is some writing on it.   Uwe Kleine-König
• [PATCH 2/2] make mc13783 regulator code generic   Uwe Kleine-König
• [PATCH] make mc13783 code generic   Uwe Kleine-König
• [PATCH 09/15] ARM: mxs: Add clock support   Uwe Kleine-König
• [PATCH 06/15] ARM: mxs: Add timer support   Uwe Kleine-König
• [PATCH] support PMIC mc13892   Uwe Kleine-König
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Uwe Kleine-König
• [PATCH] prevent 'BUG: sleeping function called from invalid context' in arch_reset()   Uwe Kleine-König
• [PATCH] support PMIC mc13892   Uwe Kleine-König
• [PATCH 1/3] ARM: mx5: add support for the two watchdog modules   Uwe Kleine-König
• [PATCHv2] support PMIC mc13892   Uwe Kleine-König
• [PATCH 1/3] ARM: mx5: add support for the two watchdog modules   Uwe Kleine-König
• [PATCH] watchdog: imx: use clk_get to acquire the watchdog clock   Uwe Kleine-König
• [PATCH 09/15] ARM: mxs: Add clock support   Uwe Kleine-König
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Uwe Kleine-König
• [PATCH 1/3] Add a common struct clk   Uwe Kleine-König
• [PATCH v3 01/15] ARM: mxs: Add core definitions   Uwe Kleine-König
• [PATCH v3 03/15] ARM: mxs: Add reset routines   Uwe Kleine-König
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Uwe Kleine-König
• [PATCH v3 06/15] ARM: mxs: Add timer support   Uwe Kleine-König
• [PATCH] Added i2c support for mc13xxx-core   Uwe Kleine-König
• [PATCH 1/3] Add a common struct clk   Uwe Kleine-König
• [PATCHv3] support PMIC mc13892   Uwe Kleine-König
• [PATCHv3] support PMIC mc13892   Uwe Kleine-König
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Uwe Kleine-König
• [PATCH v3 01/15] ARM: mxs: Add core definitions   Uwe Kleine-König
• [PATCH v3 06/15] ARM: mxs: Add timer support   Uwe Kleine-König
• [PATCH v3 06/15] ARM: mxs: Add timer support   Uwe Kleine-König
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Uwe Kleine-König
• [PATCH 1/2] Add a common struct clk   Uwe Kleine-König
• [PATCH 0/2] Common struct clk implementation, v8   Uwe Kleine-König
• [PATCH] Added i2c support for mc13xxx-core   Uwe Kleine-König
• [PATCH v2 1/2] ARM: mx5: introduce SOC_IMX51   Uwe Kleine-König
• [PATCHv3] support PMIC mc13892   Uwe Kleine-König
• [PATCH v2 08/15] ARM: mxs: Add iomux support   Uwe Kleine-König
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Uwe Kleine-König
• [PATCH v2 05/15] ARM: mxs: Add low-level debug UART support   Uwe Kleine-König
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Uwe Kleine-König
• [PATCH v3 03/15] ARM: mxs: Add reset routines   Uwe Kleine-König
• [PATCH v2 09/15] ARM: mxs: Add clock support   Uwe Kleine-König
• [PATCH 1/6] ARM: mx5: use config to define boot related addresses   Uwe Kleine-König
• [PATCH 4/6] arm: mx5: always use __mxc_cpu_type to check cpu type   Uwe Kleine-König
• [PATCH 2/6] arm: plat-mxc: add full parameter macro to define gpio port   Uwe Kleine-König
• [PATCH 5/6] arm: mx50: add core functions support   Uwe Kleine-König
• [PATCH 6/6] arm: mx50: add mx50 reference design board support   Uwe Kleine-König
• [PATCH 4/6] arm: mx5: always use __mxc_cpu_type to check cpu type   Uwe Kleine-König
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Uwe Kleine-König
• [PATCH v2 09/15] ARM: mxs: Add clock support   Uwe Kleine-König
• [PATCH v2 05/15] ARM: mxs: Add low-level debug UART support   Uwe Kleine-König
• [PATCH v2 08/15] ARM: mxs: Add iomux support   Uwe Kleine-König
• [PATCH 1/6] ARM: mx5: use config to define boot related addresses   Uwe Kleine-König
• [PATCH v3 03/15] ARM: mxs: Add reset routines   Uwe Kleine-König
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Uwe Kleine-König
• [PATCHv3] support PMIC mc13892   Uwe Kleine-König
• [PATCH 2/9] ARM i.MX51: rename IPU irqs   Uwe Kleine-König
• [PATCH] ARM: mx5/mx51_3ds: Add watchdog support   Uwe Kleine-König
• [PATCH] ARM: mx5/mx51_3ds: Add watchdog support   Uwe Kleine-König
• [PATCH v3 09/15] ARM: mxs: Add clock support   Uwe Kleine-König
• [PATCH 1/6] ARM: mx5: use config to define boot related addresses   Uwe Kleine-König
• [PATCH v3 07/15] ARM: mxs: Add gpio support   Uwe Kleine-König
• [PATCH 5/6] arm: mx50: add core functions support   Uwe Kleine-König
• [PATCH 1/2] Add a common struct clk   Uwe Kleine-König
• [PATCH v5 07/15] ARM: mxs: Add gpio support   Uwe Kleine-König
• [PATCH 5/6] arm: mx50: add core functions support   Uwe Kleine-König
• [PATCH v2] watchdog: imx: use clk_get to acquire the watchdog clock   Uwe Kleine-König
• [PATCH v3 15/15] ARM: mxs: Add build configuration for mxs   Uwe Kleine-König
• [PATCH v5 07/15] ARM: mxs: Add gpio support   Uwe Kleine-König
• [PATCH v5 07/15] ARM: mxs: Add gpio support   Uwe Kleine-König
• [PATCH v6 00/15] ARM: mxs: Add initial support for MX23 and MX28   Uwe Kleine-König
• [RFC] i.MX clock support   Uwe Kleine-König
• [PATCH v6 00/15] ARM: mxs: Add initial support for MX23 and MX28   Uwe Kleine-König
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Uwe Kleine-König
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Uwe Kleine-König
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Uwe Kleine-König
• [PATCHv2] mc13xxx: Add i2c support for mc13xxx-core   Uwe Kleine-König
• [PATCHv2] mc13xxx: Add i2c support for mc13xxx-core   Uwe Kleine-König
• [PATCH v6 08/15] ARM: mxs: Add iomux support   Uwe Kleine-König
• [PATCH 11/16] ARM: mxc: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Uwe Kleine-König
• [PATCH 04/13] ARM: pxa: convert sched_clock() to use new infrastructure   Uwe Kleine-König
• [PATCHv3 1/4] mc13xxx-core: Consolidate common code to prepare for separate i2c and spi   Uwe Kleine-König
• [PATCHv3 4/4] mc13xxx: Add i2c and spi drivers to Kconfig and Makefile   Uwe Kleine-König
• [PATCH 01/11] ARM: Add SZ_128   Uwe Kleine-König
• [PATCH v7 08/15] ARM: mxs: Add iomux support   Uwe Kleine-König
• [PATCH v7 13/15] ARM: mxs: Add initial mx23evk support   Uwe Kleine-König
• [Patch 0/0] Add Epit clocks to the iMx25.   Uwe Kleine-König
• [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28   Uwe Kleine-König
• [PATCH 1/2] ARM i.MX53: Some bug fix about MX53 MSL code   Uwe Kleine-König
• [PATCH] ARM: Add missing SZ_{32,64,128}   Uwe Kleine-König
• [PATCH] ARM: Add missing SZ_{32,64,128}   Uwe Kleine-König
• [PATCH] ARM: mxs: Change duart device to use amba-pl011   Uwe Kleine-König
• bug in PL011 console   Uwe Kleine-König
• [PATCH] serial/amba-pl011: enable uart clk in setup for console   Uwe Kleine-König
• bug in PL011 console   Uwe Kleine-König
• bug in PL011 console   Uwe Kleine-König
• [PATCH 06/10] ARM: mx28: update clocks for dual fec support   Uwe Kleine-König
• [PATCH v2 5/8] arm: mxc: move IOMUX_CONFIG_XXXX definitions to iomux-v3.h   Uwe Kleine-König
• [PATCH v2 1/8] ARM: mx5: use config to define boot related addresses   Uwe Kleine-König
• [PATCH v2 6/8] arm: mx50: add core functions support except clock   Uwe Kleine-König
• [PATCH] ARM: mxs: Change duart device to use amba-pl011   Uwe Kleine-König
• [PATCH v2] ARM: mxs: Change duart device to use amba-pl011   Uwe Kleine-König
• [PATCH v2 1/8] ARM: mx5: use config to define boot related addresses   Uwe Kleine-König
• [PATCH 06/10] ARM: mx28: update clocks for dual fec support   Uwe Kleine-König
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Uwe Kleine-König
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Uwe Kleine-König
• [PATCH 08/10] ARM: mxs: add ocotp read function   Uwe Kleine-König
• [PATCH 07/10] ARM: mx28: add the second fec device registration   Uwe Kleine-König
• [PATCH 09/10] ARM: mx28: read fec mac address from ocotp   Uwe Kleine-König
• [PATCH 10/10] ARM: mxs: add initial pm support   Uwe Kleine-König
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Uwe Kleine-König
• [PATCH 08/10] ARM: mxs: add ocotp read function   Uwe Kleine-König
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Uwe Kleine-König
• [PATCH 09/10] ARM: mx28: read fec mac address from ocotp   Uwe Kleine-König
• [PATCH 08/10] ARM: mxs: add ocotp read function   Uwe Kleine-König
• (arm-)global platform device registration functions   Uwe Kleine-König
• (arm-)global platform device registration functions   Uwe Kleine-König
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Uwe Kleine-König
• [PATCH 08/10] ARM: mxs: add ocotp read function   Uwe Kleine-König
• [PATCH 08/10] ARM: mxs: add ocotp read function   Uwe Kleine-König
• [PATCH v3 1/8] ARM: mx5: use config to define boot related addresses   Uwe Kleine-König
• [PATCH v3 2/8] arm: plat-mxc: add full parameter macro to define gpio port   Uwe Kleine-König
• [PATCH v3 3/8] arm: mx51: define mx51's own MXC_GPIO_IRQS   Uwe Kleine-König
• [PATCH v3 4/8] arm: mx5: mx51/53 have different mxc_cpu_type definition   Uwe Kleine-König
• [PATCH v3 5/8] arm: mxc: move IOMUX_CONFIG_XXXX definitions to iomux-v3.h   Uwe Kleine-König
• [PATCH v3 6/8] arm: mx50: add core functions support except clock   Uwe Kleine-König
• [PATCH v3 7/8] arm: mx50: add mx50 reference design board support   Uwe Kleine-König
• [PATCH v2 2/2] ARM i.MX53: Make MX53 EVK bootable   Uwe Kleine-König
• [PATCH v2 1/2] ARM i.MX53: Some bug fix about MX53 MSL code   Uwe Kleine-König
• (arm-)global platform device registration functions   Uwe Kleine-König
• [PATCH v3 1/8] ARM: mx5: use config to define boot related addresses   Uwe Kleine-König
• still nfs problems [Was: Linux 2.6.37-rc8]   Uwe Kleine-König
• still nfs problems [Was: Linux 2.6.37-rc8]   Uwe Kleine-König
• [PATCH 08/10] ARM: mxs: add ocotp read function   Uwe Kleine-König
• [PATCH v2 1/2] ARM i.MX53: Some bug fix about MX53 MSL code   Uwe Kleine-König
• [PATCH v3 1/8] ARM: mx5: use config to define boot related addresses   Uwe Kleine-König
• [PATCH v2] i.MX51 Framebuffer support   Peter Korsgaard
• [PATCH] arm: mach-omap2: remove NULL board_mux from board files   Aaro Koskinen
• [PATCH v2] arm: mach-omap2: remove NULL board_mux from board files   Aaro Koskinen
• [PATCH v2] arm: mach-omap2: remove NULL board_mux from board files   Aaro Koskinen
• [PATCH v3] arm: mach-omap2: remove NULL board_mux from board files   Aaro Koskinen
• [PATCH 1/2] arm: mach-omap2: n8x0: clean up dummy onenand init   Aaro Koskinen
• [PATCH 2/2] arm: mach-omap2: rx51: clean up dummy onenand init   Aaro Koskinen
• [PATCH 0/8] arm: omap: add support for RM-680   Aaro Koskinen
• [PATCH 1/8] arm: omap: rename board-rx51-sdram.c to sdram-nokia.c   Aaro Koskinen
• [PATCH 2/8] arm: omap: add sdram-nokia.h   Aaro Koskinen
• [PATCH 3/8] arm: omap: sdram-nokia: prepare for new memory timings   Aaro Koskinen
• [PATCH 4/8] arm: omap: sdram-nokia: use array to list timings   Aaro Koskinen
• [PATCH 5/8] arm: omap: sdram-nokia: improve error handling   Aaro Koskinen
• [PATCH 6/8] arm: omap: sdram-nokia: delete redundant timing data   Aaro Koskinen
• [PATCH 7/8] arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data   Aaro Koskinen
• [PATCH 8/8] arm: omap: add minimal support for RM-680   Aaro Koskinen
• [PATCH 8/8] arm: omap: add minimal support for RM-680   Aaro Koskinen
• [PATCH] arm: mach-omap2: hsmmc_reset: fix clk_get() error handling   Aaro Koskinen
• [PATCH 1/2] arm: mach-omap2: Kconfig: fix incorrect option   Aaro Koskinen
• [PATCH 2/2] arm: mach-omap2: Kconfig: devkit8000 should select needed options   Aaro Koskinen
• [PATCH 2/2] arm: mach-omap2: Kconfig: devkit8000 should select needed options   Aaro Koskinen
• [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h   Aaro Koskinen
• [PATCH v3] Keyboard: omap-keypad: use matrix_keypad.h   Aaro Koskinen
• [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling   Aaro Koskinen
• [PATCH] ARM: Gemini: Add support for PCI BUS   Hans Ulli Kroll
• [PATCH] ARM: Gemini: Add support for PCI BUS   Hans Ulli Kroll
• [PATCH] ARM: Gemini: Add support for PCI Bus   Hans Ulli Kroll
• [PATCH] Kconfig: add new symbol MIGHT_HAVE_PCI   Hans Ulli Kroll
• [PATCH 0/2] ARM: Gemini: add RTC support for Gemini SoC   Hans Ulli Kroll
• [PATCH 1/2] RTC: Add core rtc support for Gemini Soc devices   Hans Ulli Kroll
• [PATCH 2/2] ARM: Gemini: add platform support for Gemini RTC   Hans Ulli Kroll
• [PATCH 10/16] ARM: gemini: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Hans Ulli Kroll
• [RESEND] [PATCH 0/2] OMAP1: amsdelta: reserve memory for videobuf_contig   Janusz Krzysztofik
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Janusz Krzysztofik
• [PATCH 2/2] OMAP1: Amstrad Delta: reserve memory for camera   Janusz Krzysztofik
• [PATCH 2/4] omap1: Add initcall checks for omap1 and booted board   Janusz Krzysztofik
• [PATCH 12/11] omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx   Janusz Krzysztofik
• [PATCH 1/3] omap1: Use asm_irq_flags for entry-macro.S   Janusz Krzysztofik
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Janusz Krzysztofik
• [PATCH] MTD: NAND: ams-delta: convert to platform driver   Janusz Krzysztofik
• [PATCH] OMAP1: clock_data: use runtime cpu / machine checks   Janusz Krzysztofik
• [PATCH v2] MTD: NAND: ams-delta: convert to platform driver   Janusz Krzysztofik
• [PATCH] Keyboard: omap-keypad: use matrix_keypad.h   Janusz Krzysztofik
• [PATCH] Keyboard: omap-keypad: use matrix_keypad.h   Janusz Krzysztofik
• [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h   Janusz Krzysztofik
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Janusz Krzysztofik
• [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h   Janusz Krzysztofik
• [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h   Janusz Krzysztofik
• [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h   Janusz Krzysztofik
• [PATCH v3] Keyboard: omap-keypad: use matrix_keypad.h   Janusz Krzysztofik
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Janusz Krzysztofik
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Janusz Krzysztofik
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Janusz Krzysztofik
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Janusz Krzysztofik
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Janusz Krzysztofik
• [RFC PATCH] Avoid aliasing mappings in DMA coherent allocator   Janusz Krzysztofik
• [PATCH V3 00/63] Updating SPEAr Support   Viresh Kumar
• [PATCH V3 01/63] ARM: move sev definition to common system.h include file   Viresh Kumar
• [PATCH V3 02/63] sp810 Fix: Switch to slow mode before sysctl_soft_reset   Viresh Kumar
• [PATCH V3 03/63] ST SPEAr: Padmux code Updated   Viresh Kumar
• [PATCH V3 04/63] ST SPEAr: Making clock functions more generic   Viresh Kumar
• [PATCH V3 05/63] ST SPEAr: Formalized timer support   Viresh Kumar
• [PATCH V3 06/63] ST SPEAr13XX: Adding machine specific header files   Viresh Kumar
• [PATCH V3 07/63] ST SPEAr13XX: Adding machine specific src files   Viresh Kumar
• [PATCH V3 08/63] ST SPEAr: Adding support for SPEAr13xx SoC in spear generic plat/   Viresh Kumar
• [PATCH V3 09/63] ST SPEAr13XX: Added compilation support in arch/arm/   Viresh Kumar
• [PATCH V3 10/63] ST SPEAr1300: Adding default config file   Viresh Kumar
• [PATCH V3 11/63] ST SPEAr: Adding support for CLCD on SPEAr3xx/6xx   Viresh Kumar
• [PATCH V3 12/63] ST SPEAr: Updating Clock Support   Viresh Kumar
• [PATCH V3 13/63] ST SPEAr: Adding Debugfs support on clock framework   Viresh Kumar
• [PATCH V3 14/63] ST SPEAr: Correcting SOC Config base address for spear320   Viresh Kumar
• [PATCH V3 15/63] ST SPEAr: Adding PLGPIO driver for spear platform   Viresh Kumar
• [PATCH V3 17/63] ST SPEAr: Adding machine support for rtc-spear   Viresh Kumar
• [PATCH V3 18/63] ST SPEAr: adding support for synopsis i2c designware   Viresh Kumar
• [PATCH V3 19/63] ST SPEAr: Adding machine support for USB host   Viresh Kumar
• [PATCH V3 20/63] ST SPEAr: Adding machine support for keyboard   Viresh Kumar
• [PATCH V3 21/63] ST SPEAr: Added ARM PL061 GPIO Support on SPEAr13xx and modified resource size   Viresh Kumar
• [PATCH V3 22/63] ST SPEAr: Adding support for ST's PWM IP   Viresh Kumar
• [PATCH V3 23/63] ST SPEAr: Adding Watchdog support   Viresh Kumar
• [PATCH V3 24/63] ST SPEAr: Adding machine support for nand   Viresh Kumar
• [PATCH V3 25/63 resend] Newly erased page read workaround   Viresh Kumar
• [PATCH V3 26/63] ST SPEAr: Added PCIE host controller base driver support.   Viresh Kumar
• [PATCH V3 27/63] ST SPEAr: Adding support for SSP PL022   Viresh Kumar
• [PATCH V3 28/63] ST SPEAr: Adding support for SDHCI (SDIO)   Viresh Kumar
• [PATCH V3 29/63] ST SPEAr: Changing resource size of amba devices to SZ_4K   Viresh Kumar
• [PATCH V3 30/63] ST SPEAr: Replacing SIZE macro's with actual required size   Viresh Kumar
• [PATCH V3 31/63] SPEAr: defines base addresses as ulong.   Viresh Kumar
• [PATCH V3 32/63] ST SPEAr: Adding miscellaneous devices   Viresh Kumar
• [PATCH V3 33/63] ST SPEAr 13xx : Adding support for SPEAr1310   Viresh Kumar
• [PATCH V3 34/63] ST SPEAr: Adding support for DDR in clock framework   Viresh Kumar
• [PATCH V3 35/63] ST SPEAr : EMI (Extrenal Memory Interface) controller driver   Viresh Kumar
• [PATCH V3 36/63] ST SPEAr : FSMC (Flexible Static Memory Controller) NOR interface driver   Viresh Kumar
• [PATCH V3 37/63] SPEAr Clock Framework: Adding support for PLL frequency change   Viresh Kumar
• [PATCH V3 38/63] SPEAr Power Management: Added the support for Standby mode.   Viresh Kumar
• [PATCH V3 39/63] GIC: Added dummy handlers for Power Management Suspend Resume   Viresh Kumar
• [PATCH V3 40/63] SPEAr CPU freq: Adding support for CPU Freq framework   Viresh Kumar
• [PATCH V3 41/63] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms   Viresh Kumar
• [PATCH V3 42/63] ST SPEAr: replace readl, writel with __raw_readl, __raw_writel in uncompress.h   Viresh Kumar
• [PATCH V3 43/63] ST SPEAr13xx: add L2 cache support   Viresh Kumar
• [PATCH V3 44/63] ST SPEAr13xx: Modified static mappings   Viresh Kumar
• [PATCH V3 45/63] SPEAr: Adding and Updating Clock definitions   Viresh Kumar
• [PATCH V3 46/63] SPEAr : Pad multiplexing handling modified   Viresh Kumar
• [PATCH V3 47/63] SPEAr13xx : Fixed part devices in SPEAr13xx addded to the generic implementation   Viresh Kumar
• [PATCH V3 48/63] SPEAr : Updating pad multiplexing support   Viresh Kumar
• [PATCH V3 49/63] ST SPEAr3xx: Passing pmx devices address from machine *.c files   Viresh Kumar
• [PATCH V3 50/63] ST SPEAr Clock Framework: Updating for single image solution   Viresh Kumar
• [PATCH V3 51/63] SPEAr3xx: Make local structures static   Viresh Kumar
• [PATCH V3 52/63] SPEAR3xx: Rename register/irq defines to remove naming conflicts   Viresh Kumar
• [PATCH V3 53/63] SPEAr3xx: Rework pmx_dev code to remove conflicts   Viresh Kumar
• [PATCH V3 54/63] SPEAr3xx: Rework KConfig to allow all boards to be compiled in   Viresh Kumar
• [PATCH V3 55/63] SPEAr3xx: Replace defconfigs with single unified defconfig   Viresh Kumar
• [PATCH V3 56/63] ST SPEAr: Appending spear3** with global structures   Viresh Kumar
• [PATCH V3 57/63] ST SPEAr3xx: Updating plgpio and emi source to make it compliant with single image strategy   Viresh Kumar
• [PATCH V3 58/63] SPEAr6xx: Rework Kconfig for single image solution   Viresh Kumar
• [PATCH V3 59/63] ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig   Viresh Kumar
• [PATCH V3 60/63] ST SPEAr13xx: Pass default padmux settings as parameter to spear13**_init routine   Viresh Kumar
• [PATCH V3 61/63] ST SPEAr: Adding devices & clocks   Viresh Kumar
• [PATCH V3 62/63] ST SPEAr: Adding information in Documentation/ and MAINTAINERS   Viresh Kumar
• [PATCH V3 63/63] ST SPEAr: Updating defconfigs   Viresh Kumar
• [PATCH V3 16/63 resend] rtc: Adding support for spear rtc   Viresh Kumar
• [PATCH V3 25/63 resend] Newly erased page read workaround   Viresh Kumar
• mounting ext3 with readonly but there is some writing on it.   CHUNGIL LEE
• [PATCH 1/3] hvc_dcc: Fix bad code generation by marking assembly volatile   Arnaud Lacombe
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Christoph Lameter
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Christoph Lameter
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Christoph Lameter
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Christoph Lameter
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Christoph Lameter
• [PATCH] drivers: ld9040 amoled driver support   Donghwa Lee
• [PATCH] drivers: ld9040 amoled driver support   Donghwa Lee
• [PATCH] S5PC210: update gpio configuration   Donghwa Lee
• [PATCH] S5PC210: universal: update support pmic for c210 universal board   Donghwa Lee
• [PATCH] S5PC210: universal: update support pmic for c210 universal board   Donghwa Lee
• [PATCH V2] S5PC210: universal: update support pmic for c210 universal board   Donghwa Lee
• [PATCH V2] S5PC210: universal: update support pmic for c210 universal board   Donghwa Lee
• [PATCH] otg: fix link breakage, when the NOP USB Xceiver is a module   Guennadi Liakhovetski
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Guennadi Liakhovetski
• [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion   Grant Likely
• [PATCHv3 1/4] mc13xxx-core: Consolidate common code to prepare for separate i2c and spi   Grant Likely
• [sodaville] SPI support for CE4100, v2   Grant Likely
• [PATCH 2/9] spi/pxa2xx: add support for shared IRQ handler   Grant Likely
• [PATCH 1/9] spi/pxa2xx: register driver properly   Grant Likely
• [PATCH 3/9] spi/pxa2xx: Use define for SSSR_TFL_MASK instead of plain numbers   Grant Likely
• [PATCH 4/9] arm/pxa2xx: reorgazine SSP and SPI header files   Grant Likely
• [PATCH 5/9] spi/pxa2xx: Add CE4100 support   Grant Likely
• [PATCH 6/9] spi/pxa2xx: Consider CE4100's FIFO depth   Grant Likely
• [PATCH 9/9] spi/pxa2xx: pass of_node to spi device and set a parent device   Grant Likely
• [PATCH 7/9] spi/pxa2xx: Add chipselect support for Sodaville   Grant Likely
• [PATCH 8/9] spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.   Grant Likely
• [PATCH 1/9] spi/pxa2xx: register driver properly   Grant Likely
• [PATCH 1/9] spi/pxa2xx: register driver properly   Grant Likely
• [PATCH 2/7 v2] OMAP2430: hwmod data: Add McSPI   Grant Likely
• [PATCH 4/7 v2] OMAP4: hwmod data: Add McSPI   Grant Likely
• [PATCH 6/7 v2] OMAP: devices: Modify McSPI device to adapt to hwmod framework   Grant Likely
• [PATCH 7/7 v2] OMAP: runtime: McSPI driver runtime conversion   Grant Likely
• [PATCH v7 00/12] tnetv107x ssp drivers   Grant Likely
• [PATCH v7 08/12] gpio: add ti-ssp gpio driver   Grant Likely
• [PATCH v7 04/12] spi: add ti-ssp spi master driver   Grant Likely
• [PATCH] ARM: module: fix 'mod' undeclared compile error   Axel Lin
• [PATCH] [ARM] Add missing include "asm/memory.h"   Axel Lin
• [PATCH RESEND] [ARM] Add missing include "asm/memory.h"   Axel Lin
• [PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device   Tony Lindgren
• [PATCH v8 01-b/11] OMAP: GPIO: Make omap_gpio_show_rev bank specific   Tony Lindgren
• [PATCH v5 00/14] OMAP: DMA: hwmod and DMA as platform device   Tony Lindgren
• [PATCH v5 10/14] OMAP: DMA: Use DMA device attributes   Tony Lindgren
• [PATCH v5 09/14] OMAP: DMA: Convert DMA library into platform driver   Tony Lindgren
• [PATCH v5 09/14] OMAP: DMA: Convert DMA library into platform driver   Tony Lindgren
• [PATCH v5 09/14] OMAP: DMA: Convert DMA library into platform driver   Tony Lindgren
• [PATCH v4 02/13] OMAP: DMA: Introduce errata handling feature   Tony Lindgren
• [PATCH v5 09/14] OMAP: DMA: Convert DMA library into platform driver   Tony Lindgren
• Mainline OMAP3 breakage (and other OMAP?)   Tony Lindgren
• OMAP4 build error - omapfb   Tony Lindgren
• Mainline OMAP3 breakage (and other OMAP?)   Tony Lindgren
• [PATCH 0/6] omap: Board specific muxing using hwmod   Tony Lindgren
• [PATCH 1/6] omap2+: Add omap_mux_get_by_name   Tony Lindgren
• [PATCH 2/6] omap2+: Add support for hwmod specific muxing of devices   Tony Lindgren
• [PATCH 3/6] omap2+: Allow hwmod state changes to mux pads based on the state changes   Tony Lindgren
• [PATCH 4/6] omap2+: Add struct omap_device_board_data and allow omap_device_build initialize pads to mux   Tony Lindgren
• [PATCH 5/6] omap2+: Use omap_device_board_data for platform level serial init   Tony Lindgren
• [PATCH 6/6] omap2+: Initialize serial ports for wake-up events for n8x0   Tony Lindgren
• [PATCH v3] arm: mach-omap2: remove NULL board_mux from board files   Tony Lindgren
• [PATCH 1/2] arm: mach-omap2: n8x0: clean up dummy onenand init   Tony Lindgren
• [PATCH] arm: omap2: io: fix clk_get() error check   Tony Lindgren
• [PATCH v5 09/14] OMAP: DMA: Convert DMA library into platform driver   Tony Lindgren
• [PATCH 0/4] Patches to make multi-soc handling in entry-armv.S easier   Tony Lindgren
• [PATCH 1/4] ARM: Add asm_irq_base and asm_irq_flags for entry-armv.S macros   Tony Lindgren
• [PATCH 2/4] omap2+: Use asm_irq_base for entry-macro.S   Tony Lindgren
• [PATCH 3/4] omap1: Use asm_irq_flags for entry-macro.S   Tony Lindgren
• [PATCH 4/4] omap1: Use get_irqnr_preamble   Tony Lindgren
• [PATCH 0/4] Patches to make multi-soc handling in entry-armv.S easier   Tony Lindgren
• [PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device   Tony Lindgren
• [PATCH 0/5] Few misc patches for v2.6.38 merge window   Tony Lindgren
• [PATCH 1/5] Fix undefined reference to omap2_i2c_mux_pins   Tony Lindgren
• [PATCH 2/5] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Tony Lindgren
• [PATCH 3/5] omap: McBSP: Fix potential memory leak in omap_mcbsp_remove   Tony Lindgren
• [PATCH 4/5] omap: McBSP: Make the free variable update more readable   Tony Lindgren
• [PATCH 5/5] omap: Don't select mux by default for each board   Tony Lindgren
• [PATCH 0/4] Create omap1_defconfig, remove other omap1 configs   Tony Lindgren
• [PATCH 1/4] omap: Disable omap_read/write functions for omap2+   Tony Lindgren
• [PATCH 2/4] omap1: Add initcall checks for omap1 and booted board   Tony Lindgren
• [PATCH 3/4] omap1: Add omap1_defconfig   Tony Lindgren
• [PATCH 4/4] omap1: Delete old defconfigs   Tony Lindgren
• [PATCH 0/4] Patches to make multi-soc handling in entry-armv.S easier   Tony Lindgren
• [PATCH 7/9] TILER-DMM: Main TILER driver implementation   Tony Lindgren
• [PATCH] omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD   Tony Lindgren
• [PATCH] arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check   Tony Lindgren
• Problem with sram size on OMAP1611 (OSK)   Tony Lindgren
• [PATCH v8 10/11] OMAP: GPIO: Implement GPIO as a platform device   Tony Lindgren
• [PATCH 12/11] omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx   Tony Lindgren
• [PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device   Tony Lindgren
• [PATCH 12/11] omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx   Tony Lindgren
• [PATCH 1/4] omap: Disable omap_read/write functions for omap2+   Tony Lindgren
• [PATCH 0/4] Patches to make multi-soc handling in entry-armv.S easier   Tony Lindgren
• [PATCH 1/3] omap1: Use asm_irq_flags for entry-macro.S   Tony Lindgren
• [PATCH 2/3] omap1: Use get_irqnr_preamble   Tony Lindgren
• [PATCH 3/3] omap2+: Initialize omap_irq_base for entry-macro.S from platform code   Tony Lindgren
• [PATCH 3/4] omap1: Add omap1_defconfig   Tony Lindgren
• [PATCH 1/4] omap: Disable omap_read/write functions for omap2+   Tony Lindgren
• [PATCH 13/11] OMAP2+: GPIO: ensure bank wakeups are enabled by default   Tony Lindgren
• [PATCH] OMAP1: SRAM: fix size for OMAP1611 SoCs   Tony Lindgren
• Problem with sram size on OMAP1611 (OSK)   Tony Lindgren
• [PATCH v3] OMAP2+: PM/serial: fix console semaphore acquire during suspend   Tony Lindgren
• [PATCH 12/11] omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx   Tony Lindgren
• [PATCH 1/3] omap1: Use asm_irq_flags for entry-macro.S   Tony Lindgren
• [PATCH 2/4] omap1: Add initcall checks for omap1 and booted board   Tony Lindgren
• [PATCH 8/8] arm: omap: add minimal support for RM-680   Tony Lindgren
• [GIT PULL] omap fixes for v2.6.37-rc5   Tony Lindgren
• [REPOST][PATCH] Fix IGEPv2 second MMC channel power supply   Tony Lindgren
• Mainline OMAP3 breakage (and other OMAP?)   Tony Lindgren
• [PATCH v2] MTD: NAND: ams-delta: convert to platform driver   Tony Lindgren
• [PATCH v3] OMAP3: clean up ASM idle code   Tony Lindgren
• [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device   Tony Lindgren
• [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model   Tony Lindgren
• [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device   Tony Lindgren
• [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device   Tony Lindgren
• [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model   Tony Lindgren
• [PATCH 3/3] omap2+: Initialize omap_irq_base for entry-macro.Sfrom platform code   Tony Lindgren
• [PATCH 2/2] arm: mach-omap2: Kconfig: devkit8000 should select needed options   Tony Lindgren
• [PATCH 0/7 v4] OMAP3: clean up ASM sleep code   Tony Lindgren
• [PATCH] OMAP: RM-680: fix omap2_init_common_hw compile break   Tony Lindgren
• [PATCH 1/7] omap3630: nand: fix device size to work in polled mode   Tony Lindgren
• [PATCH 2/7] omap3: nand: configurable transfer type per board   Tony Lindgren
• [PATCH v6 3/7] omap: gpmc: enable irq mode in gpmc   Tony Lindgren
• [PATCH 2/2] arm: mach-omap2: Kconfig: devkit8000 should select needed options   Tony Lindgren
• [PATCH 1/3] omap: rx51: Remove __initdata from rx51_tpa6130a2_data   Tony Lindgren
• [PATCH v3 0/4] Introduce hardware spinlock framework   Tony Lindgren
• [PATCH -next] omap2430: hwmod: remove stray declaration   Tony Lindgren
• [PATCH] omap: remove dead wdt code in plat-omap/devices.c   Tony Lindgren
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Tony Lindgren
• [PATCH] omap1: pm_bus: Fix compilation warning.   Tony Lindgren
• [PATCH v2 resend] OMAP4: Pandaboard: Add omap_reserve functionality   Tony Lindgren
• [PATCH 0/6] Misc omap board patches for v2.6.38 merge window   Tony Lindgren
• [PATCH 1/6] omap1: Fix innovator FPGA init for multi-omap   Tony Lindgren
• [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality   Tony Lindgren
• [PATCH 3/6] omap3: igepv2: Don't call gpio_set_value right aftergpio_direction_output   Tony Lindgren
• [PATCH 4/6] omap3: igepv2: LED gpio-led:green:d1 is active low   Tony Lindgren
• [PATCH 5/6] omap4: Add platform changes for Ambient Light sensor   Tony Lindgren
• [PATCH 6/6] omap4: Add platform changes for PWM LED   Tony Lindgren
• [PATCH] Keyboard: omap-keypad: use matrix_keypad.h   Tony Lindgren
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Tony Lindgren
• [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality   Tony Lindgren
• [PATCH 0/5] omap4: l2x0 fixes and cleanup   Tony Lindgren
• [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality   Tony Lindgren
• [PATCH 6/6] omap2+: Initialize serial ports for wake-up events for n8x0   Tony Lindgren
• [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality   Tony Lindgren
• [PATCHv2] omap: rx51: Switch rx51_tpa6130a2_data __initdata to __initdata_or_module   Tony Lindgren
• [PATCH] omap: pandora: fix wifi support   Tony Lindgren
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Tony Lindgren
• [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support   Tony Lindgren
• [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support   Tony Lindgren
• [GIT] pull request: DMA hwmod changes   Tony Lindgren
• [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support   Tony Lindgren
• [PATCH 0/2] Add 104MHz support for OMAP OneNAND   Tony Lindgren
• [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900   Tony Lindgren
• [PATCH v2] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines   Tony Lindgren
• [PATCH] OMAP3: Devkit8000: Add DEBUG_LL support   Tony Lindgren
• [PATCH v2] OMAP4: Pandaboard: Fix MMC card detect gpio line   Tony Lindgren
• [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900   Tony Lindgren
• [PATCH] omap: rx51: Remove tvout code that plays with gpio 40   Tony Lindgren
• [PATCH] OMAP3: fix typo in OMAP3_IVA_MASK   Tony Lindgren
• [PATCH v3] Keyboard: omap-keypad: use matrix_keypad.h   Tony Lindgren
• [PATCH 2/6] omap2+: Add support for hwmod specific muxing of devices   Tony Lindgren
• [PATCH 3/6] omap2+: Allow hwmod state changes to mux pads based on the state changes   Tony Lindgren
• [PATCH 4/6] omap2+: Add struct omap_device_board_data and allow omap_device_build initialize pads to mux   Tony Lindgren
• [PATCH 5/6] omap2+: Use omap_device_board_data for platform level serial init   Tony Lindgren
• [PATCH 6/6] omap2+: Initialize serial ports for wake-up events for n8x0   Tony Lindgren
• [PATCH 0/6] omap: Board specific muxing using hwmod   Tony Lindgren
• linux-next: omap2plus_defconfig not building   Tony Lindgren
• linux-next: omap2plus_defconfig not building   Tony Lindgren
• [GIT PULL] OMAP USB Changes for Merge Window   Tony Lindgren
• [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment   Tony Lindgren
• linux-next: omap2plus_defconfig not building   Tony Lindgren
• [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment   Tony Lindgren
• [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER   Tony Lindgren
• [PATCH 09/10] MCDE: Add build files and bus   Russell King - ARM Linux
• [PATCH v2] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Russell King - ARM Linux
• [PATCH] ARM: perf: use raw_spinlock_t for pmu_lock   Russell King - ARM Linux
• [PATCH] Kconfig: add new symbol MIGHT_HAVE_PCI   Russell King - ARM Linux
• bad pmd   Russell King - ARM Linux
• mounting ext3 with readonly but there is some writing on it.   Russell King - ARM Linux
• [PATCH] mmci: supply per-instance regulator name   Russell King - ARM Linux
• [PATCH] mmci: supply per-instance regulator name   Russell King - ARM Linux
• [PATCHv5 3/4] omap: iovmm - replace __iounmap with omap_iounmap   Russell King - ARM Linux
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Russell King - ARM Linux
• [PATCH 10/11] ARM: hw_breakpoint: fix warnings generated by sparse   Russell King - ARM Linux
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Russell King - ARM Linux
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Russell King - ARM Linux
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Russell King - ARM Linux
• Cache maintenance on page table updates   Russell King - ARM Linux
• [PATCH] mmci: corrected calculation of clock div for ux500   Russell King - ARM Linux
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Russell King - ARM Linux
• Mainline OMAP3 breakage (and other OMAP?)   Russell King - ARM Linux
• OMAP4 build error - omapfb   Russell King - ARM Linux
• [PATCH 01/02] omap: dsp: remove shm from normal memory   Russell King - ARM Linux
• Mainline OMAP3 breakage (and other OMAP?)   Russell King - ARM Linux
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Russell King - ARM Linux
• Mainline OMAP3 breakage (and other OMAP?)   Russell King - ARM Linux
• Mainline OMAP3 breakage (and other OMAP?)   Russell King - ARM Linux
• [PATCH] pl011: added clock management feature   Russell King - ARM Linux
• RFC: Dynamic hwcaps   Russell King - ARM Linux
• [PATCH 14/54] ARM: ebsa110: irq_data conversion.   Russell King - ARM Linux
• [PATCH 02/54] ARM: ecard: irq_data conversion.   Russell King - ARM Linux
• [PATCH 16/54] ARM: footbridge: irq_data conversion.   Russell King - ARM Linux
• [PATCH 19/54] ARM: integrator: irq_data conversion.   Russell King - ARM Linux
• [PATCH 39/54] ARM: rpc: irq_data conversion.   Russell King - ARM Linux
• [PATCH 47/54] ARM: versatile: irq_data conversion.   Russell King - ARM Linux
• [PATCH -next] arm: trivial: add missing argument to printk   Russell King - ARM Linux
• [PATCH 0/22] More SMP cleanup   Russell King - ARM Linux
• [PATCH 01/22] ARM: remove obsolete smp_cross_call_done()   Russell King - ARM Linux
• [PATCH 02/22] ARM: SMP: pass an ipi number to smp_cross_call()   Russell King - ARM Linux
• [PATCH 03/22] ARM: SMP: avoid using bitmasks and locks for IPIs, use hardware instead   Russell King - ARM Linux
• [PATCH 04/22] ARM: SMP: remove IRQ-disabling for smp_cross_call()   Russell King - ARM Linux
• [PATCH 05/22] ARM: include local timer irq stats only when local timers configured   Russell King - ARM Linux
• [PATCH 06/22] ARM: SMP: provide accessors for irq_stat data   Russell King - ARM Linux
• [PATCH 07/22] ARM: SMP: move ipi_count into irq_stat structure   Russell King - ARM Linux
• [PATCH 08/22] ARM: fix /proc/interrupts formatting   Russell King - ARM Linux
• [PATCH 09/22] ARM: SMP: provide individual IPI interrupt statistics   Russell King - ARM Linux
• [PATCH 10/22] ARM: SMP: collect IPI and local timer IRQs for /proc/stat   Russell King - ARM Linux
• [PATCH 11/22] ARM: SMP: use more sane register allocation for __fixup_smp_on_up   Russell King - ARM Linux
• [PATCH 12/22] ARM: SMP: ensure smp_send_stop() waits for CPUs to stop   Russell King - ARM Linux
• [PATCH 13/22] ARM: SMP: move CPU number sanity checks to smp_init_cpus()   Russell King - ARM Linux
• [PATCH 14/22] ARM: SMP: Clean up ncores sanity checks   Russell King - ARM Linux
• [PATCH 15/22] ARM: SMP: get rid of get_core_count()   Russell King - ARM Linux
• [PATCH 16/22] ARM: SMP: get rid of references to poke_milo and Milo   Russell King - ARM Linux
• [PATCH 17/22] ARM: SMP: consolidate the common parts of smp_prepare_cpus()   Russell King - ARM Linux
• [PATCH 18/22] ARM: SMP: consolidate trace_hardirqs_off() into common SMP code   Russell King - ARM Linux
• [PATCH 19/22] ARM: CPU hotplug: move cpu_killed completion to core code   Russell King - ARM Linux
• [PATCH 20/22] ARM: CPU hotplug: remove bug checks in platform_cpu_die()   Russell King - ARM Linux
• [PATCH 21/22] ARM: CPU hotplug: ensure correct ordering of unplug   Russell King - ARM Linux
• [PATCH 22/22] ARM: SMP: remove smp_mpidr.h   Russell King - ARM Linux
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Russell King - ARM Linux
• [PATCH 0/22] More SMP cleanup   Russell King - ARM Linux
• [PATCH] ARM: GIC irq desciptor bug fix   Russell King - ARM Linux
• [PATCH 0/22] More SMP cleanup   Russell King - ARM Linux
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Russell King - ARM Linux
• test   Russell King - ARM Linux
• [PATCH] mmci: handle clock frequency 0 properly   Russell King - ARM Linux
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Russell King - ARM Linux
• [PATCH 0/5] ARM: GIC: cleanup   Russell King - ARM Linux
• [PATCH 1/5] ARM: GIC: provide a single initialization function for boot CPU   Russell King - ARM Linux
• [PATCH 2/5] ARM: GIC: Remove MMIO address from gic_cpu_init, rename to gic_secondary_init   Russell King - ARM Linux
• [PATCH 3/5] ARM: GIC: consolidate gic_cpu_base_addr to common GIC code   Russell King - ARM Linux
• [PATCH 4/5] ARM: GIC: move gic_data[] initialization into gic_init()   Russell King - ARM Linux
• [PATCH 5/5] ARM: GIC: private a standard get_irqnr_preamble assembler macro   Russell King - ARM Linux
• [PATCH 0/2] Support for __read_mostly   Russell King - ARM Linux
• [PATCH 1/2] ARM: implement support for read-mostly sections   Russell King - ARM Linux
• [PATCH 2/2] ARM: move high-usage mostly read variables in setup.c to __read_mostly   Russell King - ARM Linux
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Russell King - ARM Linux
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Russell King - ARM Linux
• [PATCH] Ensure experimental options are so marked   Russell King - ARM Linux
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Russell King - ARM Linux
• [PATCH 1/2] ARM: implement support for read-mostly sections   Russell King - ARM Linux
• [PATCH 02/21] ARM: gic: Add functions to save and restore gic state   Russell King - ARM Linux
• [PATCH 20/21] ARM: tegra: Allow overriding arch_reset   Russell King - ARM Linux
• [PATCH 12/21] ARM: tegra: Add suspend and hotplug support   Russell King - ARM Linux
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Russell King - ARM Linux
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Russell King - ARM Linux
• [PATCH] pl011: added clock management feature   Russell King - ARM Linux
• [PATCH 3/5] msm: timer: SMP timer support for msm   Russell King - ARM Linux
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Russell King - ARM Linux
• [PATCH 22/22] ARM: SMP: remove smp_mpidr.h   Russell King - ARM Linux
• [PATCH 08/54] ARM: aaec2000: irq_data conversion.   Russell King - ARM Linux
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Russell King - ARM Linux
• [PATCH 47/54] ARM: versatile: irq_data conversion.   Russell King - ARM Linux
• [PATCH] arm: ecard: Fix compilation warning.   Russell King - ARM Linux
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Russell King - ARM Linux
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Russell King - ARM Linux
• [PATCH v3] ARM: vexpress: add support for multiple core tiles   Russell King - ARM Linux
• [PATCH v3] ARM: vexpress: add support for multiple core tiles   Russell King - ARM Linux
• [PATCH 21/22] ARM: CPU hotplug: ensure correct ordering of unplug   Russell King - ARM Linux
• [PATCH 1/5] msm: Secure Channel Manager (SCM) support   Russell King - ARM Linux
• [PATCH 3/5] msm: timer: SMP timer support for msm   Russell King - ARM Linux
• generic irq handler and stack?   Russell King - ARM Linux
• RFC: Dynamic hwcaps   Russell King - ARM Linux
• generic irq handler and stack?   Russell King - ARM Linux
• [PATCH v4] ARM: vexpress: add support for multiple core tiles   Russell King - ARM Linux
• RFC: Dynamic hwcaps   Russell King - ARM Linux
• [RFC] Fixing CPU Hotplug for RealView Platforms   Russell King - ARM Linux
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Russell King - ARM Linux
• generic irq handler and stack?   Russell King - ARM Linux
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Russell King - ARM Linux
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Russell King - ARM Linux
• bad pmd   Russell King - ARM Linux
• [PATCH RFC] arm: Add argument to init_machine   Russell King - ARM Linux
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Russell King - ARM Linux
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Russell King - ARM Linux
• [PATCH v2 5/6] msm: hotplug: support cpu hotplug on msm   Russell King - ARM Linux
• [PATCH v2 6/6] msm: add SMP support for msm   Russell King - ARM Linux
• [PATCH v2 5/6] msm: hotplug: support cpu hotplug on msm   Russell King - ARM Linux
• [PATCH 19/22] ARM: CPU hotplug: move cpu_killed completion to core code   Russell King - ARM Linux
• [RFC PATCH 01/13] picoxcell: add support for picoXcell   Russell King - ARM Linux
• [RFC PATCH 02/13] picoxcell: add support for AXI bus snoopers   Russell King - ARM Linux
• [RFC PATCHv2] picoxcell: add support for the system timers   Russell King - ARM Linux
• [RFC PATCH 06/13] picoxcell: add support for system clks   Russell King - ARM Linux
• [PATCH v2 4/6] msm: timer: SMP timer support for msm   Russell King - ARM Linux
• [PATCH v2 2/6] msm: Secure Channel Manager (SCM) support   Russell King - ARM Linux
• [PATCH RFC] arm: Add argument to init_machine   Russell King - ARM Linux
• [RFC] Fixing CPU Hotplug for RealView Platforms   Russell King - ARM Linux
• [PATCH 1/6] ARM: mx5: use config to define boot related addresses   Russell King - ARM Linux
• [PATCH 1/6] ARM: mx5: use config to define boot related addresses   Russell King - ARM Linux
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Russell King - ARM Linux
• [PATCH v4 01/15] ARM: mxs: Add core definitions   Russell King - ARM Linux
• [PATCH] mmci: drop superfluous regulator #ifdef   Russell King - ARM Linux
• [PATCH] mmci: partially revert clock divisor code   Russell King - ARM Linux
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Russell King - ARM Linux
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Russell King - ARM Linux
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Russell King - ARM Linux
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Russell King - ARM Linux
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Russell King - ARM Linux
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Russell King - ARM Linux
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Russell King - ARM Linux
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Russell King - ARM Linux
• [PATCH v4] mach-at91: Support for gsia18s board added   Russell King - ARM Linux
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Russell King - ARM Linux
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Russell King - ARM Linux
• [PATCH v4] mach-at91: Support for gsia18s board added   Russell King - ARM Linux
• Fix IXP4xx build   Russell King - ARM Linux
• [PATCH] ARM: tegra: timer: Separate clocksource and sched_clock   Russell King - ARM Linux
• [PATCH v6 06/15] ARM: mxs: Add timer support   Russell King - ARM Linux
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Russell King - ARM Linux
• [PATCH 0/5] ARM: GIC: cleanup   Russell King - ARM Linux
• [PATCH 0/24] Update clocksource registration   Russell King - ARM Linux
• [PATCH 01/24] ARM: AT91: update clock source registration   Russell King - ARM Linux
• [PATCH 02/24] ARM: bcmring: update clock source registration   Russell King - ARM Linux
• [PATCH 03/24] ARM: davinci: update clock source registration   Russell King - ARM Linux
• [PATCH 04/24] ARM: integrator: update clock source registration   Russell King - ARM Linux
• [PATCH 05/24] ARM: ixp4xx: update clock source registration   Russell King - ARM Linux
• [PATCH 06/24] ARM: lpc32xx: update clock source registration   Russell King - ARM Linux
• [PATCH 07/24] ARM: mmp: update clock source registration   Russell King - ARM Linux
• [PATCH 08/24] ARM: MSM: update clock source registration   Russell King - ARM Linux
• [PATCH 09/24] ARM: netx: update clock source registration   Russell King - ARM Linux
• [PATCH 10/24] ARM: ns9xxx: update clock source registration   Russell King - ARM Linux
• [PATCH 11/24] ARM: omap: update clock source registration   Russell King - ARM Linux
• [PATCH 12/24] ARM: PXA: update clock source registration   Russell King - ARM Linux
• [PATCH 13/24] ARM: s5pv310: update clock source registration   Russell King - ARM Linux
• [PATCH 14/24] ARM: SA11x0: update clock source registration   Russell King - ARM Linux
• [PATCH 15/24] ARM: tcc8k: update clock source registration   Russell King - ARM Linux
• [PATCH 16/24] ARM: U300: update clock source registration   Russell King - ARM Linux
• [PATCH 17/24] ARM: nuc: update clock source registration   Russell King - ARM Linux
• [PATCH 18/24] ARM: iop: update clock source registration   Russell King - ARM Linux
• [PATCH 19/24] ARM: mxc: update clock source registration   Russell King - ARM Linux
• [PATCH 20/24] ARM: nomadik: update clock source registration   Russell King - ARM Linux
• [PATCH 21/24] ARM: spear: update clock source registration   Russell King - ARM Linux
• [PATCH 22/24] ARM: orion: update clock source registration   Russell King - ARM Linux
• [PATCH 23/24] ARM: stmp: update clock source registration   Russell King - ARM Linux
• [PATCH 24/24] ARM: realview/versatile: update clock source registration   Russell King - ARM Linux
• [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38   Russell King - ARM Linux
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Russell King - ARM Linux
• [PATCH 2/4] Optionally flush entire dcache from v6_dma_flush_range   Russell King - ARM Linux
• [PATCH 3/4] process: Add display of memory around registers when displaying regs.   Russell King - ARM Linux
• [PATCH v4 4/5] msm: hotplug: support cpu hotplug on msm   Russell King - ARM Linux
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Russell King - ARM Linux
• {PATCH] BCMRING maintainer change (was RE: [PATCH 02/24] ARM: bcmring: update clock source registration)   Russell King - ARM Linux
• [PATCH] arch/arm/kernel: use cpu_relax() in halt loops   Russell King - ARM Linux
• [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va   Russell King - ARM Linux
• [PATCH v5 5/5] msm: add SMP support for msm   Russell King - ARM Linux
• [PATCH 1/5] msm: Secure Channel Manager (SCM) support   Russell King - ARM Linux
• [PATCH] MTD: m25p80: add debugging trace in sst_write()   Russell King - ARM Linux
• [PATCH 01/16] ARM: Remove dependency of plat-orion time code on mach directory includes.   Russell King - ARM Linux
• [PATCH 1/9] ARM i.MX51: Add ipu clock support   Russell King - ARM Linux
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Russell King - ARM Linux
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Russell King - ARM Linux
• [PATCH 1/9] ARM i.MX51: Add ipu clock support   Russell King - ARM Linux
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Russell King - ARM Linux
• [PATCH v6 01/15] ARM: mxs: Add core definitions   Russell King - ARM Linux
• dma_cache_sync replacement call   Russell King - ARM Linux
• [RFC 2/2] Selective MMU identity mapping for kexec   Russell King - ARM Linux
• [PATCH] ARM: ensure all sched_clock() implementations are notrace marked   Russell King - ARM Linux
• [PATCH v4 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod   Russell King - ARM Linux
• [PATCH 0/13] 64-bit sched_clock   Russell King - ARM Linux
• [PATCH 01/13] ARM: sched_clock: provide common infrastructure for sched_clock()   Russell King - ARM Linux
• [PATCH 02/13] ARM: ixp4xx: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 03/13] ARM: mmp: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 04/13] ARM: pxa: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 05/13] ARM: sa1100: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 06/13] ARM: tegra: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 07/13] ARM: u300: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 08/13] ARM: iop: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 09/13] ARM: nomadik: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 10/13] ARM: omap: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 11/13] ARM: orion: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 12/13] ARM: versatile: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 13/13] ARM: vexpress: add sched_clock() for Versatile Express   Russell King - ARM Linux
• [PATCH 04/13] ARM: pxa: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 12/24] ARM: PXA: update clock source registration   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Russell King - ARM Linux
• [PATCH 01/13] ARM: sched_clock: provide common infrastructure for sched_clock()   Russell King - ARM Linux
• [PATCH 0/13] 64-bit sched_clock   Russell King - ARM Linux
• arm cortex_a9_mpcore timer: local timer and global timer   Russell King - ARM Linux
• [PATCH v2] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Russell King - ARM Linux
• [PATCH] ARM: ensure all sched_clock() implementations are notrace marked   Russell King - ARM Linux
• [PATCH] ARM: ensure all sched_clock() implementations are notrace marked   Russell King - ARM Linux
• [PATCH] OMAP: RM-680: fix omap2_init_common_hw compile break   Russell King - ARM Linux
• [PATCH] Fix rounding in clocks_calc_mult_shift()   Russell King - ARM Linux
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Russell King - ARM Linux
• [PATCH v5 5/5] msm: add SMP support for msm   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• [PATCH 01/03] ARM: mach-shmobile: SMP base support   Russell King - ARM Linux
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Russell King - ARM Linux
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Russell King - ARM Linux
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Russell King - ARM Linux
• [PATCH 01/40] ARM: AT91: update clock source registration   Russell King - ARM Linux
• [PATCH 02/40] ARM: bcmring: update clock source registration   Russell King - ARM Linux
• [PATCH 03/40] ARM: davinci: update clock source registration   Russell King - ARM Linux
• [PATCH 04/40] ARM: integrator: update clock source registration   Russell King - ARM Linux
• [PATCH 05/40] ARM: ixp4xx: update clock source registration   Russell King - ARM Linux
• [PATCH 06/40] ARM: lpc32xx: update clock source registration   Russell King - ARM Linux
• [PATCH 07/40] ARM: mmp: update clock source registration   Russell King - ARM Linux
• [PATCH 08/40] ARM: MSM: update clock source registration   Russell King - ARM Linux
• [PATCH 09/40] ARM: netx: update clock source registration   Russell King - ARM Linux
• [PATCH 10/40] ARM: ns9xxx: update clock source registration   Russell King - ARM Linux
• [PATCH 11/40] ARM: omap: update clock source registration   Russell King - ARM Linux
• [PATCH 12/40] ARM: PXA: update clock source registration   Russell King - ARM Linux
• [PATCH 13/40] ARM: s5pv310: update clock source registration   Russell King - ARM Linux
• [PATCH 14/40] ARM: SA11x0: update clock source registration   Russell King - ARM Linux
• [PATCH 15/40] ARM: tcc8k: update clock source registration   Russell King - ARM Linux
• [PATCH 16/40] ARM: U300: update clock source registration   Russell King - ARM Linux
• [PATCH 17/40] ARM: nuc: update clock source registration   Russell King - ARM Linux
• [PATCH 18/40] ARM: iop: update clock source registration   Russell King - ARM Linux
• [PATCH 19/40] ARM: mxc: update clock source registration   Russell King - ARM Linux
• [PATCH 20/40] ARM: nomadik: update clock source registration   Russell King - ARM Linux
• [PATCH 21/40] ARM: spear: update clock source registration   Russell King - ARM Linux
• [PATCH 22/40] ARM: orion: update clock source registration   Russell King - ARM Linux
• [PATCH 23/40] ARM: stmp: update clock source registration   Russell King - ARM Linux
• [PATCH 24/40] ARM: realview/versatile: update clock source registration   Russell King - ARM Linux
• [PATCH 25/40] ARM: tegra: timer: Separate clocksource and sched_clock   Russell King - ARM Linux
• [PATCH 26/40] ARM: ensure all sched_clock() implementations are notrace marked   Russell King - ARM Linux
• [PATCH 27/40] Fix rounding in clocks_calc_mult_shift()   Russell King - ARM Linux
• [PATCH 28/40] ARM: sched_clock: provide common infrastructure for sched_clock()   Russell King - ARM Linux
• [PATCH 29/40] ARM: ixp4xx: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 30/40] ARM: mmp: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 31/40] ARM: pxa: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 32/40] ARM: sa1100: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 33/40] ARM: tegra: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 34/40] ARM: u300: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 35/40] ARM: iop: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 36/40] ARM: nomadik: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 37/40] ARM: omap: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 38/40] ARM: orion: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 39/40] ARM: versatile: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 40/40] ARM: vexpress: add sched_clock() for Versatile Express   Russell King - ARM Linux
• [PATCH 28/40] ARM: sched_clock: provide common infrastructure for sched_clock()   Russell King - ARM Linux
• [PATCH 28/40] ARM: sched_clock: provide common infrastructure for sched_clock()   Russell King - ARM Linux
• [PATCH 28/40] ARM: sched_clock: provide common infrastructure for sched_clock()   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• [PATCH v2 resend] OMAP4: Pandaboard: Add omap_reserve functionality   Russell King - ARM Linux
• [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality   Russell King - ARM Linux
• [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• [PATCH] ARM: Fix subtle race in CPU pen_release hotplug code   Russell King - ARM Linux
• [PATCH] ARM: VFP: re-initialize VFP coprocessor access enables on CPU hotplug   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• [PATCH] ARM: smp: improve CPU bringup failure diagnostics   Russell King - ARM Linux
• [RFC] Fixing CPU Hotplug for RealView Platforms   Russell King - ARM Linux
• [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality   Russell King - ARM Linux
• [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality   Russell King - ARM Linux
• [RFC] Fixing CPU Hotplug for RealView Platforms   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Russell King - ARM Linux
• [PATCH 35/40] ARM: iop: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Russell King - ARM Linux
• [PATCH v4 3/6] ARM: U8500 core machine support   Russell King - ARM Linux
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Russell King - ARM Linux
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Russell King - ARM Linux
• [PATCH] mmci: drop superfluous regulator #ifdef   Russell King - ARM Linux
• [PATCH] RFC: PL08X DMA driver and signal muxing   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to MMCI/PL180   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to MMCI/PL180   Russell King - ARM Linux
• [PATCH 0/13] 64-bit sched_clock   Russell King - ARM Linux
• [PATCH V3 39/63] GIC: Added dummy handlers for Power Management Suspend Resume   Russell King - ARM Linux
• [PATCH V3 39/63] GIC: Added dummy handlers for Power Management Suspend Resume   Russell King - ARM Linux
• [PATCH 3/5] msm: timer: SMP timer support for msm   Russell King - ARM Linux
• [PATCH V3 39/63] GIC: Added dummy handlers for Power ManagementSuspend Resume   Russell King - ARM Linux
• [PATCH] ARM: Fix subtle race in CPU pen_release hotplug code   Russell King - ARM Linux
• [PATCH v4 3/6] ARM: U8500 core machine support   Russell King - ARM Linux
• [PATCH 1/6 v8] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Russell King - ARM Linux
• ks8695_gettimeoffset   Russell King - ARM Linux
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Russell King - ARM Linux
• [PATCH 2/2] ARM: use cached memory in dma_alloc_coherent() if possible   Russell King - ARM Linux
• [PATCH 1/2] ARM: convert dma-mapping to asm-generic API   Russell King - ARM Linux
• [PATCH] ARM: Add missing SZ_{32,64,128}   Russell King - ARM Linux
• [PATCH] ARM: sched_clock: improve mult/shift accuracy with high frequency clocks   Russell King - ARM Linux
• [PATCH 1/2] ARM: convert dma-mapping to asm-generic API   Russell King - ARM Linux
• Help with cleaning CNS21xx code   Russell King - ARM Linux
• [PATCH v2 2/3] ARM: timer-sp: support timer clock freq other than 1MHz   Russell King - ARM Linux
• [PATCH v2 3/3] ARM: twd_smp: add clock api support   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to MMCI/PL180   Russell King - ARM Linux
• [RFC][PATCH] ARM: Add initial hibernation support for Cortex A8 and A9   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to MMCI/PL180   Russell King - ARM Linux
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Russell King - ARM Linux
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Russell King - ARM Linux
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Russell King - ARM Linux
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Russell King - ARM Linux
• [PATCH] ARM: S5PV310: Implement kernel timers using MCT   Russell King - ARM Linux
• [PATCH 33/40] ARM: tegra: convert sched_clock() to use new infrastructure   Russell King - ARM Linux
• [PATCH 1/6] ARM: PL011: Ensure error flags are clear at startup   Russell King - ARM Linux
• [PATCH 2/6] ARM: PL011: Separate hardware FIFO size from TTY FIFO size   Russell King - ARM Linux
• [PATCH 3/6] ARM: PL011: Ensure IRQs are disabled in UART interrupt handler   Russell King - ARM Linux
• [PATCH 4/6] ARM: PL011: Allow better handling of vendor data   Russell King - ARM Linux
• [PATCH 5/6] ARM: PL011: Add support for transmit DMA   Russell King - ARM Linux
• [PATCH 6/6] ARM: PL011: add DMA burst threshold support for ST variants   Russell King - ARM Linux
• PL011 DMA patches   Russell King - ARM Linux
• [PATCH] ARM: Stop irqsoff trace on return to user   Russell King - ARM Linux
• PL011 DMA patches   Russell King - ARM Linux
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Russell King - ARM Linux
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Russell King - ARM Linux
• [PATCH] S5PC210: universal: update support pmic for c210 universal board   Russell King - ARM Linux
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Russell King - ARM Linux
• [PATCHv8 00/12] Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH V3 00/63] Updating SPEAr Support   Russell King - ARM Linux
• [PATCHv8 00/12] Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH] ARM: S5PV310: Implement kernel timers using MCT   Russell King - ARM Linux
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Russell King - ARM Linux
• [PATCHv8 00/12] Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCHv8 00/12] Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCHv8 00/12] Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCHv8 00/12] Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCHv8 00/12] Contiguous Memory Allocator   Russell King - ARM Linux
• Git pull request: ux500-core for the v2.6.38 merge window   Russell King - ARM Linux
• bug in PL011 console   Russell King - ARM Linux
• linux-next: omap2plus_defconfig not building   Russell King - ARM Linux
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Russell King - ARM Linux
• [PATCH 00/11] PL08x DMA driver updates   Russell King - ARM Linux
• [PATCH 01/11] ARM: PL08x: spelling fixes   Russell King - ARM Linux
• [PATCH 02/11] ARM: PL08x: constify vendor name field   Russell King - ARM Linux
• [PATCH 03/11] ARM: PL08x: use 'u32' for LLI structure members, not dma_addr_t   Russell King - ARM Linux
• [PATCH 04/11] ARM: PL08x: don't assume that the LLI pointer has the bus bit clear   Russell King - ARM Linux
• [PATCH 05/11] ARM: PL08x: rename lli.next to lli.lli   Russell King - ARM Linux
• [PATCH 06/11] ARM: PL08x: clean up LLI lookup   Russell King - ARM Linux
• [PATCH 07/11] ARM: PL08x: don't try to use llis_bus as a pointer   Russell King - ARM Linux
• [PATCH 08/11] ARM: PL08x: prefix hex numbers with 0x   Russell King - ARM Linux
• [PATCH 09/11] ARM: PL08x: fix locking in tasklet   Russell King - ARM Linux
• [PATCH 10/11] ARM: PL08x: move callback outside spinlock'd region.   Russell King - ARM Linux
• [PATCH 11/11] ARM: PL08x: fix atomic_t usage and tx_submit() return value   Russell King - ARM Linux
• [PATCH 0/6] PL011 DMA support   Russell King - ARM Linux
• [PATCH 1/6] ARM: PL011: Ensure error flags are clear at startup   Russell King - ARM Linux
• [PATCH 2/6] ARM: PL011: Separate hardware FIFO size from TTY FIFO size   Russell King - ARM Linux
• [PATCH 3/6] ARM: PL011: Ensure IRQs are disabled in UART interrupt handler   Russell King - ARM Linux
• [PATCH 4/6] ARM: PL011: Allow better handling of vendor data   Russell King - ARM Linux
• [PATCH 5/6] ARM: PL011: Add support for transmit DMA   Russell King - ARM Linux
• [PATCH 6/6] ARM: PL011: add DMA burst threshold support for ST variants   Russell King - ARM Linux
• [PATCH] Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()   Russell King - ARM Linux
• [RFC PATCH] Avoid aliasing mappings in DMA coherent allocator   Russell King - ARM Linux
• Bogus machine-type from bootloader   Russell King - ARM Linux
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Russell King - ARM Linux
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Russell King - ARM Linux
• [RFC] Make SMP secondary CPU up more resilient to failure.   Russell King - ARM Linux
• [PATCH] TWD: enable one-shot mode   Russell King - ARM Linux
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Russell King - ARM Linux
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Russell King - ARM Linux
• RFC: Dynamic hwcaps   Jamie Lokier
• [PATCH 09/10] MCDE: Add build files and bus   Marcus Lorentzon
• [PATCH 09/10] MCDE: Add build files and bus   Marcus Lorentzon
• [PATCH] ARM: Add Kconfig entry for SG chain support   Fernando Guzman Lugo
• [PATCH 0/4] omap: iovmm - fixes for iovmm module   Fernando Guzman Lugo
• [PATCHv6 1/4] omap: iovmm - no gap checking for fixed address   Fernando Guzman Lugo
• [PATCHv6 2/4] omap: iovmm - add superpages support to fixed da address   Fernando Guzman Lugo
• [PATCHv6 3/4] omap: iovmm - replace __iounmap with iounmap   Fernando Guzman Lugo
• [PATCHv6 4/4] omap: iommu - create new api to set valid da range   Fernando Guzman Lugo
• [PATCHv7 0/4] omap: iovmm - fixes for iovmm module   Fernando Guzman Lugo
• [PATCHv7 1/4] omap: iovmm - no gap checking for fixed address   Fernando Guzman Lugo
• [PATCHv7 2/4] omap: iovmm - add superpages support to fixed da address   Fernando Guzman Lugo
• [PATCHv7 3/4] omap: iovmm - replace __iounmap with iounmap   Fernando Guzman Lugo
• [PATCHv7 4/4] omap: iommu - create new api to set valid da range   Fernando Guzman Lugo
• [PATCH 1/6] OMAP: device: make rt_va easily avaialable to drivers   Omar Ramirez Luna
• [PATCH] OMAP: device: make rt_va easily avaialable to drivers   Omar Ramirez Luna
• [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va   Omar Ramirez Luna
• [PATCH v3 0/5] omap: mailbox: hwmod support   Omar Ramirez Luna
• [PATCH v3 1/5] OMAP2: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v3 2/5] OMAP3: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v3 3/5] OMAP4: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v3 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod   Omar Ramirez Luna
• [PATCH v3 5/5] OMAP: mailbox: add omap_device latency information   Omar Ramirez Luna
• [PATCH v4 0/5] omap: mailbox: hwmod support   Omar Ramirez Luna
• [PATCH v4 1/5] OMAP2: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v4 2/5] OMAP3: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v4 3/5] OMAP4: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v4 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod   Omar Ramirez Luna
• [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling   Omar Ramirez Luna
• [PATCH] OMAP: RM-680: fix omap2_init_common_hw compile break   Omar Ramirez Luna
• Cannot detect SATA disks w/ CONFIG_SATA_PMP w/o actually using SATA multiplier   Lin Mac
• Cannot detect SATA disks w/ CONFIG_SATA_PMP w/o actually using SATA multiplier   Lin Mac
• Cannot detect SATA disks w/ CONFIG_SATA_PMP w/o actually using SATA multiplier   Lin Mac
• [PATCH 1/1] ARM: cns3xxx: ahci: Fixup for softwreset failures with direct connected disks with CONFIG_SATA_PMP enabled.   Lin Mac
• [PATCH] OMAP1: I2C: fix device initialization   Cory Maccarrone
• [PATCH v8 10/11] OMAP: GPIO: Implement GPIO as a platform device   Cory Maccarrone
• [PATCH v8 04/11] OMAP7xx: GPIO: Introduce support for GPIO init   Cory Maccarrone
• [PATCH] OMAP1: clock_data: use runtime cpu / machine checks   Cory Maccarrone
• [PATCH] Keyboard: omap-keypad: use matrix_keypad.h   Cory Maccarrone
• [PATCH] OMAP1: clock_data: use runtime cpu / machine checks   Cory Maccarrone
• [PATCH] Keyboard: omap-keypad: use matrix_keypad.h   Cory Maccarrone
• [PATCH] Keyboard: omap-keypad: use matrix_keypad.h   Cory Maccarrone
• [PATCH 1/5] msm: Secure Channel Manager (SCM) support   Pavel Machek
• [PATCH] msm: trout: add keypad support   Pavel Machek
• [RFC][PATCH] ARM: Add initial hibernation support for Cortex A8 and A9   Pavel Machek
• [PATCH] mach-at91: Support for gms board added.   Ryan Mallon
• [PATCH v2] mach-at91: Support for gms board added   Ryan Mallon
• [PATCH v2] mach-at91: Support for gms board added   Ryan Mallon
• [PATCH v3] mach-at91: Support for gms board added   Ryan Mallon
• [PATCH 15/54] ARM: ep93xx: irq_data conversion.   Ryan Mallon
• [PATCH] base: add sysfs socs info   Ryan Mallon
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Ryan Mallon
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Ryan Mallon
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Ryan Mallon
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Ryan Mallon
• [PATCH 1/6 v9] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Ryan Mallon
• [PATCH 1/6 v10] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Ryan Mallon
• [PATCH 1/6 v10] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Ryan Mallon
• [PATCH 1/6 v11] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Ryan Mallon
• [PATCH v6 0/7] nand prefetch-irq support and ecc layout chanage   Charles Manning
• [PATCH] arm: ecard: Fix compilation warning.   Belisko Marek
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Catalin Marinas
• [PATCH] ARM: TWD: Consolidate local timers support   Catalin Marinas
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Catalin Marinas
• Cache maintenance on page table updates   Catalin Marinas
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Catalin Marinas
• [PATCH 1/5] ARM: GIC: provide a single initialization function for boot CPU   Catalin Marinas
• [PATCH 2/5] ARM: GIC: Remove MMIO address from gic_cpu_init, rename to gic_secondary_init   Catalin Marinas
• [PATCH 3/5] ARM: GIC: consolidate gic_cpu_base_addr to common GIC code   Catalin Marinas
• [PATCH 4/5] ARM: GIC: move gic_data[] initialization into gic_init()   Catalin Marinas
• [PATCH 5/5] ARM: GIC: private a standard get_irqnr_preamble assembler macro   Catalin Marinas
• [PATCH 1/2] ARM: implement support for read-mostly sections   Catalin Marinas
• [PATCH 1/2] ARM: implement support for read-mostly sections   Catalin Marinas
• [PATCH 21/22] ARM: CPU hotplug: ensure correct ordering of unplug   Catalin Marinas
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work with CONFIG_THUMB2_KERNEL   Catalin Marinas
• [PATCH 21/22] ARM: CPU hotplug: ensure correct ordering of unplug   Catalin Marinas
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   Catalin Marinas
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   Catalin Marinas
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Catalin Marinas
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix (take 2)   Catalin Marinas
• [PATCH v3 5/5] msm: add SMP support for msm   Catalin Marinas
• [PATCH v3 4/5] msm: hotplug: support cpu hotplug on msm   Catalin Marinas
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Catalin Marinas
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Catalin Marinas
• [PATCH v3 4/5] msm: hotplug: support cpu hotplug on msm   Catalin Marinas
• [PATCH 2/4] Optionally flush entire dcache from v6_dma_flush_range   Catalin Marinas
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH v5 5/5] msm: add SMP support for msm   Catalin Marinas
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Catalin Marinas
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Catalin Marinas
• [PATCH v5 4/5] msm: hotplug: support cpu hotplug on msm   Catalin Marinas
• arm cortex_a9_mpcore timer: local timer and global timer   Catalin Marinas
• arm cortex_a9_mpcore timer: local timer and global timer   Catalin Marinas
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Catalin Marinas
• [PATCH] ARM: Fix subtle race in CPU pen_release hotplug code   Catalin Marinas
• [PATCH] ARM: Fix subtle race in CPU pen_release hotplug code   Catalin Marinas
• [PATCH 2/2] ARM: use cached memory in dma_alloc_coherent() if possible   Catalin Marinas
• [RFC][PATCH] ARM: Add initial hibernation support for Cortex A8 and A9   Catalin Marinas
• Cavium Networks CNS21xx SoC Support   Damjan Marion
• Help with cleaning CNS21xx code   Damjan Marion
• Help with cleaning CNS21xx code   Damjan Marion
• Bogus machine-type from bootloader   Damjan Marion
• Bogus machine-type from bootloader   Damjan Marion
• RFC: Dynamic hwcaps   Dave Martin
• RFC: Dynamic hwcaps   Dave Martin
• RFC: Dynamic hwcaps   Dave Martin
• RFC: Dynamic hwcaps   Dave Martin
• [PATCH v2 0/3] ARM: omap: Thumb-2 kernel compatibility fixes   Dave Martin
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work with CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 3/3] ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work with CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work withCONFIG_THUMB2_KERNEL   Dave Martin
• RFC: Dynamic hwcaps   Dave Martin
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work withCONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work withCONFIG_THUMB2_KERNEL   Dave Martin
• RFC: Dynamic hwcaps   Dave Martin
• RFC: Dynamic hwcaps   Dave Martin
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6   Dave Martin
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work withCONFIG_THUMB2_KERNEL   Dave Martin
• RFC: Dynamic hwcaps   Dave Martin
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6   Dave Martin
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Dave Martin
• RFC: Dynamic hwcaps   Dave Martin
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Dave Martin
• Linux kernel compilation failed with error: FPA is unsupported in the AAPCS   Dave Martin
• [PATCH] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6   Dave Martin
• [PATCH 0/2] ARM: Thumb-2: Fix Kconfig rules to avoid nonworking configs   Dave Martin
• [PATCH 1/2] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6   Dave Martin
• [PATCH 2/2] ARM: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL   Dave Martin
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Dave Martin
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Dave Martin
• [PATCH] ata: pata_at91.c bugfix for high master clock   Sergey Matyukevich
• [PATCH] ata: pata_at91.c bugfix for high master clock   Sergey Matyukevich
• [PATCH v6 0/3 Resend] OMAP: Add opp data   Nishanth Menon
• [PATCH v5 1/3] omap: opp: add OMAP3 OPP table data and common init   Nishanth Menon
• [PATCH v5 2/3] omap4: opp: add OPP table data   Nishanth Menon
• [PATCH v4 3/3] OMAP3: remove OPP interfaces from OMAP PM layer   Nishanth Menon
• [PATCH 2/8] arm: omap: add sdram-nokia.h   Nishanth Menon
• [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code   Nishanth Menon
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses   Nishanth Menon
• [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code   Nishanth Menon
• [PATCH 4/7] OMAP3: re-organize the ASM sleep code   Nishanth Menon
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses   Nishanth Menon
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths   Nishanth Menon
• [PATCH 6/7] OMAP3: add comments for low power code errata   Nishanth Menon
• [PATCH 7/7] OMAP3: ASM sleep code format rework   Nishanth Menon
• [PATCH v2] OMAP4: Pandaboard: Add omap_reserve functionality   Menon, Nishanth
• [PATCH 0/7 v5] OMAP3: clean up ASM sleep code   Nishanth Menon
• [PATCH v4 0/7] OMAP: idle path errata fixes   Nishanth Menon
• [PATCH v4 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all   Nishanth Menon
• [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy   Nishanth Menon
• [PATCH v4 3/7] omap3: pm: introduce errata handling   Nishanth Menon
• [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA   Nishanth Menon
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Nishanth Menon
• [PATCH v4 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode   Nishanth Menon
• [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2   Nishanth Menon
• [PATCH 0/7 v6] OMAP3: clean up ASM sleep code   Nishanth Menon
• [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2   Nishanth Menon
• [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA   Nishanth Menon
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Nishanth Menon
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Nishanth Menon
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Nishanth Menon
• [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy   Nishanth Menon
• [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy   Nishanth Menon
• [PATCH v4 3/7] omap3: pm: introduce errata handling   Nishanth Menon
• [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA   Nishanth Menon
• [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2   Nishanth Menon
• [PATCH v5 0/7] OMAP: idle path errata fixes   Nishanth Menon
• [PATCH v5 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all   Nishanth Menon
• [PATCH v5 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy   Nishanth Menon
• [PATCH v5 3/7] OMAP3: pm: introduce errata handling   Nishanth Menon
• [PATCH v5 4/7] OMAP3630: PM: Erratum i608: disable RTA   Nishanth Menon
• [PATCH v5 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Nishanth Menon
• [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode   Nishanth Menon
• [PATCH v5 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2   Nishanth Menon
• [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode   Nishanth Menon
• [PATCH v2] OMAP4: Pandaboard: Fix MMC card detect gpio line   Nishanth Menon
• [PATCH] OMAP3: fix typo in OMAP3_IVA_MASK   Nishanth Menon
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.   Menon, Nishanth
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.   Nishanth Menon
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.   Nishanth Menon
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Eric Miao
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Eric Miao
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Eric Miao
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Eric Miao
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Eric Miao
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Eric Miao
• [GIT PULL] pxa: fixes for v2.6.37-rc4   Eric Miao
• [PATCH] ARM: mmp: added 5V Regulator enable for Brownstone   Eric Miao
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Eric Miao
• [PATCH 12/24] ARM: PXA: update clock source registration   Eric Miao
• [PATCH 10/17] ARM: pxa: Correct touch IRQ passing to UCB1400 on vpac270   Eric Miao
• [PATCH] ARM: pxa: PXA_ESERIES depends on FB_W100.   Eric Miao
• [PATCH] ARM: mmp: refactored 5V regulator support using fixed-regulator   Eric Miao
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Eric Miao
• [PATCH 12/24] ARM: PXA: update clock source registration   Eric Miao
• [GIT PULL] pxa: fixes for v2.6.37-rc6   Eric Miao
• [GIT PULL] pxa: patches for next merge window   Eric Miao
• bad pmd   Eric Miao
• [PATCH] Kirkwood: Add support for 6282 based QNAP devices   Martin Michlmayr
• test   Mike
• [RFC PATCH] scatterlist: Initialize the dma_address field with invalid dma address   David Miller
• [PATCH] ide: at91_ide.c bugfix for high master clock   David Miller
• RFC: Dynamic hwcaps   Mark Mitchell
• RFC: Dynamic hwcaps   Mark Mitchell
• [PATCH] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines   Daniel Morsing
• [PATCH v2] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines   Daniel Morsing
• [PATCH] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines   Daniel Morsing
• [RFC] add BUG_ON_MAPPABLE_NULL macro   Andrew Morton
• (arm-)global platform device registration functions   Andrew Morton
• [PATCH] msm: iommu: Use the correct memory allocation flag   Stepan Moskovchenko
• [PATCH 0/7] msm: Support for Qualcomm MSM8960   Stepan Moskovchenko
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   Stepan Moskovchenko
• [PATCH 2/7] msm: Physical offset for MSM8960   Stepan Moskovchenko
• [PATCH 3/7] msm: irqs-8960: Interrupt map for MSM8960   Stepan Moskovchenko
• [PATCH 4/7] msm: Board file for MSM8960 simulator   Stepan Moskovchenko
• [PATCH 5/7] msm: timer: Timer support for MSM8960   Stepan Moskovchenko
• [PATCH 6/7] msm: Makefile cleanup   Stepan Moskovchenko
• [PATCH 7/7] msm: Build support for the MSM8960 target   Stepan Moskovchenko
• [PATCH v5 5/5] msm: add SMP support for msm   Steve Muckle
• [PATCH 2/7] msm: Physical offset for MSM8960   Steve Muckle
• [PATCH 2/7] msm: Physical offset for MSM8960   Steve Muckle
• Mainline OMAP3 breakage (and other OMAP?)   Paul Mundt
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Paul Mundt
• [PATCH] rfc v2: ARM: mach-shmobile: mackerel: Add zboot support   Paul Mundt
• [PATCH 00/03] ARM: mach-shmobile: Initial SMP support   Paul Mundt
• [PATCH] ARM: mach-shmobile: Clean up headsmp.S   Paul Mundt
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Paul Mundt
• [PATCH v2] video: imxfb: Fix the maximum value for yres   Paul Mundt
• [PATCH] dma_declare_coherent_memory: push ioremap() up to caller   Paul Mundt
• [PATCH] drivers: ld9040 amoled driver support   Paul Mundt
• [patch v3] mmc, ARM: Add zboot from MMC support for SuperH Mobile ARM   Paul Mundt
• [PATCH v2 resend] OMAP4: Pandaboard: Add omap_reserve functionality   Raghuveer Murthy
• still nfs problems [Was: Linux 2.6.37-rc8]   Trond Myklebust
• still nfs problems [Was: Linux 2.6.37-rc8]   Trond Myklebust
• still nfs problems [Was: Linux 2.6.37-rc8]   Trond Myklebust
• [PATCH 1/1] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH 0/4] ARM: S5P: Add platform support for MIPI-CSI2 devices   Sylwester Nawrocki
• [PATCH 1/4] mach-s5pv210: Add platform definitions for mipi-csis   Sylwester Nawrocki
• [PATCH 2/4] mach-s5pv310: Add resource definitions for mipi-csis   Sylwester Nawrocki
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Sylwester Nawrocki
• [PATCH 4/4] mach-s5pv210: Add MIPI-CSI DPHY clock definition   Sylwester Nawrocki
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Sylwester Nawrocki
• [PATCH 0/4] ARM: S5P: Add platform support for MIPI-CSI2 devices   Sylwester Nawrocki
• [PATCH 2/4] mach-s5pv310: Add resource definitions for mipi-csis   Sylwester Nawrocki
• [PATCH 1/4] mach-s5pv210: Add platform definitions for mipi-csis   Sylwester Nawrocki
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Sylwester Nawrocki
• [PATCH 1/4] mach-s5pv210: Add platform definitions for mipi-csis   Sylwester Nawrocki
• [PATCH 0/4 v2] ARM: S5P: Add platform support for MIPI-CSI slave devices   Sylwester Nawrocki
• [PATCH 1/4 v2] ARM: S5PV210: Add resource definitions for MIPI CSIS   Sylwester Nawrocki
• [PATCH 2/4 v2] ARM: S5PV310: Add resource definitions for MIPI CSIS   Sylwester Nawrocki
• [PATCH 3/4 v2] ARM: S5P: Add platform support for MIPI CSIS devices   Sylwester Nawrocki
• [PATCH 4/4 v2] ARM: S5PV210: Add clock definition for MIPI-CSIS DPHY   Sylwester Nawrocki
• [PATCH 4/4 v2] ARM: S5PV210: Add clock definition for MIPI-CSIS DPHY   Sylwester Nawrocki
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Rajendra Nayak
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Rajendra Nayak
• [PATCH 3/3] omap2+: Initialize omap_irq_base for entry-macro.Sfrom platform code   Rajendra Nayak
• [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two   Rajendra Nayak
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Rajendra Nayak
• [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two   Rajendra Nayak
• [PATCH 1/5] OMAP4: PM: Use the lowpwrstatechange feature on OMAP4   Rajendra Nayak
• [PATCH v2 1/5] OMAP4: PM: Use the low-power state change feature on OMAP4   Rajendra Nayak
• [PATCH v2 2/5] OMAP4: PM: Do not assume clkdm supports hw transitions   Rajendra Nayak
• [PATCHv7 00/10] Contiguous Memory Allocator   Michal Nazarewicz
• [PATCHv7 01/10] mm: migrate.c: fix compilation error   Michal Nazarewicz
• [PATCHv7 02/10] lib: bitmap: Added alignment offset for bitmap_find_next_zero_area()   Michal Nazarewicz
• [PATCHv7 03/10] lib: genalloc: Generic allocator improvements   Michal Nazarewicz
• [PATCHv7 04/10] mm: move some functions from memory_hotplug.c to page_isolation.c   Michal Nazarewicz
• [PATCHv7 05/10] mm: alloc_contig_free_pages() added   Michal Nazarewicz
• [PATCHv7 06/10] mm: MIGRATE_CMA migration type added   Michal Nazarewicz
• [PATCHv7 07/10] mm: MIGRATE_CMA isolation functions added   Michal Nazarewicz
• [PATCHv7 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [PATCHv7 09/10] mm: cma: Test device and application added   Michal Nazarewicz
• [PATCHv7 10/10] ARM: cma: Added CMA to Aquila, Goni and c210 universal boards   Michal Nazarewicz
• [PATCHv7 06/10] mm: MIGRATE_CMA migration type added   Michal Nazarewicz
• [PATCHv7 08/10] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [PATCHv8 00/12] Contiguous Memory Allocator   Michal Nazarewicz
• [PATCHv8 01/12] mm: migrate.c: fix compilation error   Michal Nazarewicz
• [PATCHv8 02/12] lib: bitmap: Added alignment offset for bitmap_find_next_zero_area()   Michal Nazarewicz
• [PATCHv8 03/12] lib: genalloc: Generic allocator improvements   Michal Nazarewicz
• [PATCHv8 04/12] mm: move some functions from memory_hotplug.c to page_isolation.c   Michal Nazarewicz
• [PATCHv8 05/12] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCHv8 06/12] mm: alloc_contig_range() added   Michal Nazarewicz
• [PATCHv8 07/12] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [PATCHv8 08/12] mm: MIGRATE_CMA migration type added   Michal Nazarewicz
• [PATCHv8 09/12] mm: MIGRATE_CMA isolation functions added   Michal Nazarewicz
• [PATCHv8 10/12] mm: MIGRATE_CMA support added to CMA   Michal Nazarewicz
• [PATCHv8 11/12] mm: cma: Test device and application added   Michal Nazarewicz
• [PATCHv8 12/12] ARM: cma: Added CMA to Aquila, Goni and c210 universal boards   Michal Nazarewicz
• [PATCHv8 00/12] Contiguous Memory Allocator   Michal Nazarewicz
• [PATCHv8 00/12] Contiguous Memory Allocator   Michal Nazarewicz
• [PATCH] arch/arm/kernel: use cpu_relax() in halt loops   Jonathan Neuschäfer
• [PATCH] arch/arm/kernel: use cpu_relax() in halt loops   Jonathan Neuschäfer
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Will Newton
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Will Newton
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Will Newton
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Will Newton
• [PATCH] dw_mmc: Add Synopsys DesignWare mmc host driver.   Will Newton
• [PATCH v4] dw_mmc: Add Synopsys DesignWare mmc host driver.   Will Newton
• [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part two   Jarkko Nikula
• [PATCH 1/3] omap: rx51: Remove __initdata from rx51_tpa6130a2_data   Jarkko Nikula
• [PATCH 2/3] omap: rx51: Remove extra tlv320aic3x.h inclusion   Jarkko Nikula
• [PATCH 3/3] omap: rx51: Add supplies and data for codec b part of TLV320AIC34   Jarkko Nikula
• [PATCHv2] omap: rx51: Switch rx51_tpa6130a2_data __initdata to __initdata_or_module   Jarkko Nikula
• [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900   Jarkko Nikula
• [PATCH 1/2] omap: rx51: Cleanup vdds_sdi supply construction   Jarkko Nikula
• [PATCH 2/2] omap: rx51: Add vdda_dac supply for tvout   Jarkko Nikula
• [PATCH] omap: rx51: Remove tvout code that plays with gpio 40   Jarkko Nikula
• [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900   Jarkko Nikula
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v10 4/6] davinci: MMC/SD support for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v7 11/12] davinci: add tnetv107x evm backlight device   Nori, Sekhar
• [PATCH v7 11/12] davinci: add tnetv107x evm backlight device   Nori, Sekhar
• [PATCH v7 11/12] davinci: add tnetv107x evm backlight device   Nori, Sekhar
• [PATCH v4 1/2 (REPOST)] davinci: am18x/da850/omap-l138: add support for higher speed grades   Sekhar Nori
• [PATCH v4 2/2 (REPOST)] davinci: am18x/da850/omap-l138 evm: add support for higher speed grades   Sekhar Nori
• [PATCH v4 1/2 (REPOST)] davinci: am18x/da850/omap-l138: add support for higher speed grades   Nori, Sekhar
• [PATCH v5 1/2] davinci: am18x/da850/omap-l138: add support for higher speed grades   Sekhar Nori
• [PATCH v4 2/2] davinci: am18x/da850/omap-l138 evm: add support for higher speed grades   Sekhar Nori
• [PATCH] davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs   Nori, Sekhar
• [PATCH v3] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Nori, Sekhar
• [PATCH v10 4/6] davinci: MMC/SD support for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v11 0/6] Add Omapl138-Hawkboard support   Nori, Sekhar
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   Jeff Ohlstein
• [PATCH 0/5] SMP support for msm   Jeff Ohlstein
• [PATCH 1/5] msm: Secure Channel Manager (SCM) support   Jeff Ohlstein
• [PATCH 2/5] msm: scm-boot: Support for setting cold/warm boot addresses   Jeff Ohlstein
• [PATCH 3/5] msm: timer: SMP timer support for msm   Jeff Ohlstein
• [PATCH 4/5] msm: hotplug: support cpu hotplug on msm   Jeff Ohlstein
• [PATCH 5/5] msm: add SMP support for msm   Jeff Ohlstein
• [PATCH 3/5] msm: timer: SMP timer support for msm   Jeff Ohlstein
• [PATCH v2 0/6] SMP support for msm   Jeff Ohlstein
• [PATCH v2 1/6] arm: dma-mapping: move consistent_init to early_initcall   Jeff Ohlstein
• [PATCH v2 2/6] msm: Secure Channel Manager (SCM) support   Jeff Ohlstein
• [PATCH v2 3/6] msm: scm-boot: Support for setting cold/warm boot addresses   Jeff Ohlstein
• [PATCH v2 4/6] msm: timer: SMP timer support for msm   Jeff Ohlstein
• [PATCH v2 5/6] msm: hotplug: support cpu hotplug on msm   Jeff Ohlstein
• [PATCH v2 6/6] msm: add SMP support for msm   Jeff Ohlstein
• [PATCH v2 6/6] msm: add SMP support for msm   Jeff Ohlstein
• [PATCH v2 4/6] msm: timer: SMP timer support for msm   Jeff Ohlstein
• [PATCH v2 4/6] msm: timer: SMP timer support for msm   Jeff Ohlstein
• [PATCH v4 0/5] SMP support for msm   Jeff Ohlstein
• [PATCH v4 1/5] msm: Secure Channel Manager (SCM) support   Jeff Ohlstein
• [PATCH v4 2/5] msm: scm-boot: Support for setting cold/warm boot addresses   Jeff Ohlstein
• [PATCH v4 3/5] msm: timer: SMP timer support for msm   Jeff Ohlstein
• [PATCH v4 4/5] msm: hotplug: support cpu hotplug on msm   Jeff Ohlstein
• [PATCH v5 5/5] msm: add SMP support for msm   Jeff Ohlstein
• [PATCH 08/24] ARM: MSM: update clock source registration   Jeff Ohlstein
• [PATCH v4 4/5] msm: hotplug: support cpu hotplug on msm   Jeff Ohlstein
• [PATCH v5 0/5] SMP support for msm   Jeff Ohlstein
• [PATCH v5 1/5] msm: Secure Channel Manager (SCM) support   Jeff Ohlstein
• [PATCH v5 2/5] msm: scm-boot: Support for setting cold/warm boot addresses   Jeff Ohlstein
• [PATCH v5 3/5] msm: timer: SMP timer support for msm   Jeff Ohlstein
• [PATCH v5 4/5] msm: hotplug: support cpu hotplug on msm   Jeff Ohlstein
• [PATCH v5 5/5] msm: add SMP support for msm   Jeff Ohlstein
• [PATCH v5 4/5] msm: hotplug: support cpu hotplug on msm   Jeff Ohlstein
• [PATCH v6 0/5] SMP support for msm   Jeff Ohlstein
• [PATCH v6 1/5] msm: Secure Channel Manager (SCM) support   Jeff Ohlstein
• [PATCH v6 2/5] msm: scm-boot: Support for setting cold/warm boot addresses   Jeff Ohlstein
• [PATCH v6 3/5] msm: timer: SMP timer support for msm   Jeff Ohlstein
• [PATCH v6 4/5] msm: hotplug: support cpu hotplug on msm   Jeff Ohlstein
• [PATCH v6 5/5] msm: add SMP support for msm   Jeff Ohlstein
• [PATCH 09/17] UCB1400: Pass ucb1400-gpio data through ac97 bus   Samuel Ortiz
• [PATCH 1/2] Change the register name definitions for mc13783   Samuel Ortiz
• [PATCHv3] support PMIC mc13892   Samuel Ortiz
• [PATCH 01/20] mfd/ab8500: remove spi support   Samuel Ortiz
• [PATCH 01/20] mfd/ab8500: remove spi support   Samuel Ortiz
• [PATCH 06/20] mfd/tc35892: rename tc35892 header to tc3589x   Samuel Ortiz
• [PATCH 07/20] mfd/tc35892: rename tc35892 core driver to tc3589x   Samuel Ortiz
• [PATCH 08/20] mfd/tc3589x: rename tc35892 structs/registers to tc359x   Samuel Ortiz
• [PATCH 09/20] mfd/tc3589x: add block identifier for multiple child devices   Samuel Ortiz
• [PATCH 11/20] mfd/tc3589x: fix random interrupt misses   Samuel Ortiz
• [PATCH 12/20] mfd/tc3589x: undo gpio module reset during chip init   Samuel Ortiz
• [PATCH 13/20] mfd/tc3589x: add suspend/resume support   Samuel Ortiz
• [PATCH] Change the register name definitions for mc13783   Samuel Ortiz
• [PATCH 01/20] mfd/ab8500: remove spi support   Samuel Ortiz
• [PATCH v2] mach-at91: Support for gms board added   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91: Refactor Stamp9G20 and PControl G20 board file   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] MMC: Fix multiblock SDIO transfers in ATMEL MCI   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] mach-at91: Support for gsia18s board added   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] mach-at91: Support for gsia18s board added   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] dmaengine: at_hdmac: fix buffer transfer size specification   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/16] ARM: at91: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/40] ARM: AT91: update clock source registration   Jean-Christophe PLAGNIOL-VILLARD
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Venkatesh Pallipadi
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Venkatesh Pallipadi
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Venkatesh Pallipadi
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Venkatesh Pallipadi
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Venkatesh Pallipadi
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Venkatesh Pallipadi
• [PATCH] sched: Fix the irqtime code to deal with u64 wraps   Venkatesh Pallipadi
• [PATCH 1/2] sched: Fix the irqtime code to deal with u64 wraps   Venkatesh Pallipadi
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Alberto Panizzo
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Alberto Panizzo
• [PATCH] support PMIC mc13892   Alberto Panizzo
• [PATCH] support PMIC mc13892   Alberto Panizzo
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Alberto Panizzo
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Alberto Panizzo
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Alberto Panizzo
• [PATCH] ARM: GIC irq desciptor bug fix   Kyungmin Park
• [PATCH 1/4] mach-s5pv210: Add platform definitions for mipi-csis   Kyungmin Park
• [PATCH 2/4] mach-s5pv310: Add resource definitions for mipi-csis   Kyungmin Park
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Kyungmin Park
• [PATCH 14/17] ARM: S5PV310: Define I2S clocks   Kyungmin Park
• [PATCH 14/17] ARM: S5PV310: Define I2S clocks   Kyungmin Park
• [PATCH v4 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kyungmin Park
• [PATCH] S5PC210: Universal: SDHCI devices support   Kyungmin Park
• [PATCH v4 2/2] sdhci-s3c: Add support no internal clock divider in host controller   Kyungmin Park
• [PATCH] S5PC210: universal: update support pmic for c210 universal board   Kyungmin Park
• [PATCH v2] ARM: S5PC210: Use nr_irqs instead of NR_IRQS   Kyungmin Park
• [PATCHv8 00/12] Contiguous Memory Allocator   Kyungmin Park
• [PATCH 1/5] S5PC110: add MIPI-DSI system register definitions.   Kyungmin Park
• [PATCH 1/5] S5PC110: add MIPI-DSI system register definitions.   Kyungmin Park
• [PATCH 1/2] arm: ux500: Add prcmu support for operating points   Martin Persson
• [PATCH 2/2] arm: ux500: Add cpufreq support for u8500   Martin Persson
• RFC: Dynamic hwcaps   Thomas Petazzoni
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Mikael Pettersson
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Mikael Pettersson
• Linux kernel compilation failed with error: FPA is unsupported in the AAPCS   Mikael Pettersson
• Linux kernel compilation failed with error: FPA is unsupported in the AAPCS   Mikael Pettersson
• [PATCH] sched: Fix the irqtime code to deal with u64 wraps   Mikael Pettersson
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Mikael Pettersson
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Mikael Pettersson
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Mikael Pettersson
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Mikael Pettersson
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Mikael Pettersson
• [PATCH v2] include/linux: Add missing include / fix build failure   Nick Piggin
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Jean Pihet
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work withCONFIG_THUMB2_KERNEL   Jean Pihet
• [PATCH] OMAP2+: PM/serial: fix console semaphore acquire during suspend   Jean Pihet
• [PATCH v2] OMAP3: clean up ASM idle code   Jean Pihet
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Jean Pihet
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Jean Pihet
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Jean Pihet
• [PATCH v3] OMAP3: clean up ASM idle code   Jean Pihet
• OMAP3: Warning: swp{b} use is deprecated for this architecture   Jean Pihet
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses   Jean Pihet
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths   Jean Pihet
• [PATCH 7/7] OMAP3: ASM sleep code format rework   Jean Pihet
• [PATCH 0/7 v4] OMAP3: clean up ASM sleep code   Jean Pihet
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses   Jean Pihet
• [PATCH 0/7 v5] OMAP3: clean up ASM sleep code   Jean Pihet
• [PATCH 0/7 v5] OMAP3: clean up ASM sleep code   Jean Pihet
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths   Jean Pihet
• [PATCH 7/7] OMAP3: ASM sleep code format rework   Jean Pihet
• [PATCH 0/7 v6] OMAP3: clean up ASM sleep code   Jean Pihet
• [PATCH v4 0/7] OMAP: idle path errata fixes   Jean Pihet
• [PATCH v4 3/7] omap3: pm: introduce errata handling   Jean Pihet
• [PATCH v4 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all   Jean Pihet
• [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy   Jean Pihet
• [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2   Jean Pihet
• [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA   Jean Pihet
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Jean Pihet
• [PATCH v4 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode   Jean Pihet
• State of SMP / dual-core for MV78200?   Nicolas Pitre
• [PATCH 0/4] Patches to make multi-soc handling in entry-armv.S easier   Nicolas Pitre
• [PATCH 0/4] Patches to make multi-soc handling in entry-armv.S easier   Nicolas Pitre
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Nicolas Pitre
• [PATCH (sh-2.6) 2/2] arm: use generic implementation of boot_init_stack_canary   Nicolas Pitre
• [PATCH] Kirkwood: Add support for 6282 based QNAP devices   Nicolas Pitre
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work withCONFIG_THUMB2_KERNEL   Nicolas Pitre
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work withCONFIG_THUMB2_KERNEL   Nicolas Pitre
• [PATCH (sh-2.6) 1/2] sh: add stack smashing protection support   Nicolas Pitre
• [PATCH 2/2] ARM: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL   Nicolas Pitre
• [PATCH 1/2] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6   Nicolas Pitre
• [PATCH] sched: Fix the irqtime code to deal with u64 wraps   Nicolas Pitre
• [PATCH 22/24] ARM: orion: update clock source registration   Nicolas Pitre
• [PATCH 01/16] ARM: Remove dependency of plat-orion time code on mach directory includes.   Nicolas Pitre
• [PATCH 02/16] ARM: Remove dependency of plat-orion GPIO code on mach directory includes.   Nicolas Pitre
• [PATCH 01/16] ARM: Remove dependency of plat-orion time code on mach directory includes.   Nicolas Pitre
• [PATCH 01/16] ARM: Remove dependency of plat-orion time code on mach directory includes.   Nicolas Pitre
• [PATCH 0/3] fix for issues resulting from the stack based kmap_atomic   Nicolas Pitre
• [PATCH 1/3] ARM: get rid of kmap_high_l1_vipt()   Nicolas Pitre
• [PATCH 2/3] ARM: fix cache-xsc3l2 after stack based kmap_atomic()   Nicolas Pitre
• [PATCH 3/3] ARM: fix cache-feroceon-l2 after stack based kmap_atomic()   Nicolas Pitre
• [PATCH 28/40] ARM: sched_clock: provide common infrastructure for sched_clock()   Nicolas Pitre
• [PATCH 28/40] ARM: sched_clock: provide common infrastructure for sched_clock()   Nicolas Pitre
• [PATCH 28/40] ARM: sched_clock: provide common infrastructure for sched_clock()   Nicolas Pitre
• [PATCH 38/40] ARM: orion: convert sched_clock() to use new infrastructure   Nicolas Pitre
• Git pull request: Orion and friends update for next merge window   Nicolas Pitre
• [PATCH 28/40] ARM: sched_clock: provide common infrastructure for sched_clock()   Nicolas Pitre
• Git pull request: map_atomic fixes for v2.6.37-rc6   Nicolas Pitre
• [PATCH] hvc_dcc: Simplify assembly for v6 and v7 ARM   Nicolas Pitre
• [PATCH 1/3] hvc_dcc: Fix bad code generation by marking assembly volatile   Nicolas Pitre
• [PATCH 3/3] hvc_dcc: Simplify assembly for v6 and v7 ARM   Nicolas Pitre
• [PATCH 1/3] hvc_dcc: Fix bad code generation by marking assembly volatile   Nicolas Pitre
• [PATCH] ARM: sched_clock: improve mult/shift accuracy with high frequency clocks   Nicolas Pitre
• [PATCH 1/7] msm: io: I/O register definitions for MSM8960   Nicolas Pitre
• [PATCH] ARM: sched_clock: improve mult/shift accuracy with high frequency clocks   Nicolas Pitre
• [PATCH] mach-at91: Support for gms board added.   Igor Plyatov
• [PATCH v2] mach-at91: Support for gms board added   Igor Plyatov
• [PATCH] mach-at91: Support for gms board added.   Igor Plyatov
• [PATCH v2] mach-at91: Support for gms board added   Igor Plyatov
• [PATCH v2] mach-at91: Support for gms board added   Igor Plyatov
• [PATCH v3] mach-at91: Support for gms board added   Igor Plyatov
• [PATCH] at91: Refactor Stamp9G20 and PControl G20 board file   Igor Plyatov
• [PATCH v4] mach-at91: Support for gsia18s board added   Igor Plyatov
• [PATCH] ata: pata_at91.c bugfix for high master clock   Igor Plyatov
• [PATCH] ide: at91_ide.c bugfix for high master clock   Igor Plyatov
• [PATCH v2] ata: pata_at91.c bugfix for high master clock   Igor Plyatov
• [PATCH v2] ide: at91_ide.c bugfix for high master clock   Igor Plyatov
• [PATCH] ata: pata_at91.c bugfix for high master clock   Igor Plyatov
• [PATCH v4] mach-at91: Support for gsia18s board added   Igor Plyatov
• [PATCH v2] ata: pata_at91.c bugfix for high master clock   Igor Plyatov
• [PATCH v4] mach-at91: Support for gsia18s board added   Igor Plyatov
• [PATCH v4] mach-at91: Support for gsia18s board added   Igor Plyatov
• [PATCH v4] mach-at91: Support for gsia18s board added   Igor Plyatov
• [PATCH RESEND] ARM: io: fix namespace conflicts   Sourav Poddar
• [PATCH] arm: plat-omap: counter_32k: Fix build error due to IS_ERR   Sourav Poddar
• [PATCH] ARM: Stop irqsoff trace on return to user   Todd Poynor
• IMX SPI - 17-24 bit bug and >32 bit support.   Bill Pringlemeir
• IMX SPI - 17-24 bit bug and >32 bit support.   Bill Pringlemeir
• [Patch 0/0] Add Epit clocks to the iMx25.   Bill Pringlemeir
• iMx25 Register defines. [was: [Patch 0/0] Add Epit clocks to the iMx25.]   Bill Pringlemeir
• [Patch v3] AM35xx: Craneboard: Add USB EHCI support   Srinath R
• [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion   Raja, Govindraj
• [PATCH v1] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Rajashekhara, Sudhakar
• [PATCH] sdhci: ensure clocks are enabled on mulitple controllers   Philip Rakity
• [PATCH] sdhci: support setting f_max clock via call back   Philip Rakity
• [PATCH] sdhci: add platform support for setting f_max clock   Philip Rakity
• [PATCH] sdhci: add ops to force delay in operations due to silicon= issues   Philip Rakity
• [PATCH] sdhci: delete clk gating code since not correct   Philip Rakity
• [PATCH] sdhci: remove support for quirks in sdhci-pxa.c -- not use=   Philip Rakity
• [PATCH] Enable BUS WIDTH testing for MMC/eMMC cards   Philip Rakity
• [PATCH] plat-pxa: add infrastructure support for multiple sd card =   Philip Rakity
• [PATCH] sdhci: enable CAP support for SD/eMMC/Wifi cards that are =   Philip Rakity
• [PATCH] plat-pxa: Enable ability to adjust SD/MMC clocks   Philip Rakity
• [PATCH] sdhci: Add support PXA168, PXA910, and MMP2 controllers   Philip Rakity
• [PATCH] mach-mmp: only show Development boards supported by CPU   Philip Rakity
• [PATCH] ARM: mmp: add mmc resource for sdh controllers   Philip Rakity
• [PATCH] arch-arm: allow PXA168/PXA910/MMP2 SoC to be selected - no=   Philip Rakity
• [PATCH] mach-mmp: Support for SD/MMC clock adjustment in brownston=   Philip Rakity
• [PATCH] mach-mmp: Enable multiple platform support for SD/MMC cloc=   Philip Rakity
• [PATCH] mmc: add support for H/W clock gating of SD controller   Philip Rakity
• [PATCH] sdhci: added register defintions for sd host 3.0 HOST CONT=   Philip Rakity
• [PATCH] sdhci: support hardware clock gating in the SD layer   Philip Rakity
• [PATCH] sdhci: add support for H/W clock gating of SD controller   Philip Rakity
• [PATCH] mmc: fix regression testing bus width when CAP not defined   Philip Rakity
• [PATCH] mach-mmp: brownstone -- change SD/MMC clk_delay to max for= eMMC   Philip Rakity
• [PATCH 0/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 1/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 2/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 3/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 4/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 5/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 6/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 7/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 8/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 9/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 10/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 11/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 12/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 13/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 14/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 15/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 16/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 17/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 18/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 19/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 20/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 21/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 22/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 23/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• Fwd: [PATCH 3/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 15/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• Fwd: [PATCH 7/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 1/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 15/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Philip Rakity
• [PATCH 8/8] staging: tidspbridge - make sync_wait_on_event interruptible   Ramirez Luna, Omar
• [PATCH 1/6] OMAP: device: make rt_va easily avaialable to drivers   Ramirez Luna, Omar
• [PATCH] OMAP: device: make rt_va easily avaialable to drivers   Ramirez Luna, Omar
• [PATCH v3 5/5] OMAP: mailbox: add omap_device latency information   Ramirez Luna, Omar
• [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va   Ramirez Luna, Omar
• [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files   Ramirez Luna, Omar
• [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling   Ramirez Luna, Omar
• [PATCH v4 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod   Ramirez Luna, Omar
• [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling   Ramirez Luna, Omar
• [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling   Ramirez Luna, Omar
• [PATCH 07/16] ARM: Make PCIBIOS_* into global variables.   Mike Rapoport
• [PATCH] [ARM] it8152: add IT8152_LAST_IRQ definition to fix build error   Mike Rapoport
• [PATCH 1/2] arm/pxa: fix build of it8152   Mike Rapoport
• [PATCH] support PMIC mc13892   Marc Reilly
• [PATCH] Added i2c support for mc13xxx-core   Marc Reilly
• [PATCH] Added i2c support for mc13xxx-core   Marc Reilly
• [PATCH] Added i2c support for mc13xxx-core   Marc Reilly
• [PATCH] Added i2c support for mc13xxx-core   Marc Reilly
• Add i2c support for mc13xxx-core   Marc Reilly
• [PATCH] Added i2c support for mc13xxx-core   Marc Reilly
• [PATCH] Added i2c support for mc13xxx-core   Marc Reilly
• [PATCHv2] mc13xxx: Add i2c support for mc13xxx-core   Marc Reilly
• [PATCHv2] mc13xxx: Add i2c support for mc13xxx-core   Marc Reilly
• [PATCHv2] mc13xxx: Add i2c support for mc13xxx-core   Marc Reilly
• mc13xxx core support for i2c   Marc Reilly
• [PATCHv3 1/4] mc13xxx-core: Consolidate common code to prepare for separate i2c and spi   Marc Reilly
• [PATCHv3 2/4] mc13xxx: Add spi driver   Marc Reilly
• [PATCHv3 3/4] mc13xxx: Add i2c driver   Marc Reilly
• [PATCHv3 4/4] mc13xxx: Add i2c and spi drivers to Kconfig and Makefile   Marc Reilly
• [PATCHv3 1/4] mc13xxx-core: Consolidate common code to prepare for separate i2c and spi   Marc Reilly
• [PATCHv3 4/4] mc13xxx: Add i2c and spi drivers to Kconfig and Makefile   Marc Reilly
• bad pmd   Matt Reimer
• [PATCH] [ARM] pxa: fix page table corruption on resume   Matt Reimer
• bad pmd   Matt Reimer
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v10 4/6] davinci: MMC/SD support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v10 4/6] davinci: MMC/SD support for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v10 4/6] davinci: MMC/SD support for Omapl138-Hawkboard   Victor Rodriguez
• ulpi_check_integrity returning error   Philippe Rétornaz
• generic irq handler and stack?   Tim Sander
• generic irq handler and stack?   Tim Sander
• generic irq handler and stack?   Tim Sander
• Interrupt latencies on i.mx was Re: generic irq handler and stack?   Tim Sander
• [PATCH] watchdog: imx: use clk_get to acquire the watchdog clock   Wolfram Sang
• [PATCH v2] watchdog: imx: use clk_get to acquire the watchdog clock   Wolfram Sang
• [PATCHv2] mc13xxx: Add i2c support for mc13xxx-core   Wolfram Sang
• [PATCH v7 05/15] ARM: mxs: Add low-level debug UART support   Wolfram Sang
• [PATCH v7 05/15] ARM: mxs: Add low-level debug UART support   Wolfram Sang
• [PATCH v7 05/15] ARM: mxs: Add low-level debug UART support   Wolfram Sang
• [PATCH] ARM: mxs: Change duart device to use amba-pl011   Wolfram Sang
• [PATCH] ARM: mxs: Change duart device to use amba-pl011   Wolfram Sang
• [PATCH v6 01/10] OMAP3: PM: Adding voltage driver support.   Anand Sawant
• [PATCH v6 09/10] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers   Anand Sawant
• [PATCH v5 2/5] OMAP4: Adding voltage driver support   Anand Sawant
• [PATCH 2/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Enrico Scholz
• [PATCH v2] watchdog: imx: use clk_get to acquire the watchdog clock   Wim Van Sebroeck
• [REPOST][PATCH] Fix IGEPv2 second MMC channel power supply   Enric Balletbò i Serra
• [REPOST][PATCH] Fix IGEPv2 second MMC channel power supply   Enric Balletbò i Serra
• [PATCH] make mc13783 code generic   Yong Shen
• [PATCHv2] make mc13783 regulator code generic   Yong Shen
• [PATCH] add clock debug information for imx51 babbage   Yong Shen
• [PATCH] add clock debug information for imx51 babbage   Yong Shen
• [PATCHv2] make mc13783 regulator code generic   Yong Shen
• [PATCHv2] make mc13783 regulator code generic   Yong Shen
• [PATCH] add clock debug information for imx51 babbage   Yong Shen
• [PATCH] add clock debug information for imx51 babbage   Yong Shen
• [PATCH 1/2] Change the register name definitions for mc13783   Yong Shen
• [PATCH 1/2] Change the register name definitions for mc13783   Yong Shen
• [PATCH 2/2] make mc13783 regulator code generic   Yong Shen
• [PATCH 2/2] make mc13783 regulator code generic   Yong Shen
• [PATCHv2] add clock debug information for imx51 babbage   Yong Shen
• [PATCH 1/2] Change the register name definitions for mc13783   Yong Shen
• [PATCH 2/2] make mc13783 regulator code generic   Yong Shen
• [PATCHv2] add clock debug information for imx51 babbage   Yong Shen
• [PATCH 2/2] make mc13783 regulator code generic   Yong Shen
• [PATCH 1/2] Change the register name definitions for mc13783   Yong Shen
• [PATCH 2/2] make mc13783 regulator code generic   Yong Shen
• [PATCH] make mc13783 code generic   Yong Shen
• [PATCH 1/2] Change the register name definitions for mc13783   Yong Shen
• [PATCH] support PMIC mc13892   Yong Shen
• [PATCH] support PMIC mc13892   Yong Shen
• [PATCH] support PMIC mc13892   Yong Shen
• [PATCH] support PMIC mc13892   Yong Shen
• [PATCH] Added i2c support for mc13xxx-core   Yong Shen
• [PATCHv2] support PMIC mc13892   Yong Shen
• [PATCHv2] support PMIC mc13892   Yong Shen
• [PATCHv3] support PMIC mc13892   Yong Shen
• [PATCH] Added i2c support for mc13xxx-core   Yong Shen
• [PATCHv3] support PMIC mc13892   Yong Shen
• [PATCHv3] support PMIC mc13892   Yong Shen
• [PATCHv3] support PMIC mc13892   Yong Shen
• [PATCHv3] support PMIC mc13892   Yong Shen
• [PATCHv3] support PMIC mc13892   Yong Shen
• [PATCH 1/2] Change the register name definitions for mc13783   Yong Shen
• [PATCHv4] regulator: support PMIC mc13892   Yong Shen
• [PATCH] Change the register name definitions for mc13783   Yong Shen
• [PATCH 1/2] ARM i.MX53: Some bug fix about MX53 MSL code   Yong Shen
• [PATCH 2/2] ARM i.MX53: Make MX53 EVK bootable   Yong Shen
• [PATCH v2 2/2] ARM i.MX53: Make MX53 EVK bootable   Yong Shen
• [PATCH v2 1/2] ARM i.MX53: Some bug fix about MX53 MSL code   Yong Shen
• [PATCH 0/5] omap4: l2x0 fixes and cleanup   Santosh Shilimkar
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPUbootup   Santosh Shilimkar
• [PATCH 22/22] ARM: SMP: remove smp_mpidr.h   Santosh Shilimkar
• [PATCH 22/22] ARM: SMP: remove smp_mpidr.h   Santosh Shilimkar
• Problem with sram size on OMAP1611 (OSK)   Santosh Shilimkar
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH v2 3/3] ARM: omap4: Convert END() to ENDPROC() for correctlinkage with CONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH v2 1/3] ARM: omap: Enable low-level omap3 PM code to work withCONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [RFC] Fixing CPU Hotplug for RealView Platforms   Santosh Shilimkar
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Santosh Shilimkar
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH v2 2/3] ARM: omap4: Correct definition of do_wfi() forCONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH 1/2] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6   Santosh Shilimkar
• [PATCH 2/2] ARM: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL   Santosh Shilimkar
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Santosh Shilimkar
• [PATCH 0/5] omap4: l2x0 fixes and cleanup   Santosh Shilimkar
• [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one   Santosh Shilimkar
• [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one   Santosh Shilimkar
• [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two   Santosh Shilimkar
• [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two   Santosh Shilimkar
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Santosh Shilimkar
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses   Santosh Shilimkar
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths   Santosh Shilimkar
• [PATCH 0/7 v4] OMAP3: clean up ASM sleep code   Santosh Shilimkar
• [PATCH 7/7] OMAP3: ASM sleep code format rework   Santosh Shilimkar
• [PATCH 0/7 v4] OMAP3: clean up ASM sleep code   Santosh Shilimkar
• [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code   Santosh Shilimkar
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses   Santosh Shilimkar
• [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code   Santosh Shilimkar
• [PATCH 4/7] OMAP3: re-organize the ASM sleep code   Santosh Shilimkar
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths   Santosh Shilimkar
• [PATCH 6/7] OMAP3: add comments for low power code errata   Santosh Shilimkar
• [PATCH 7/7] OMAP3: ASM sleep code format rework   Santosh Shilimkar
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   Santosh Shilimkar
• [PATCH v4 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all   Santosh Shilimkar
• [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy   Santosh Shilimkar
• [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2   Santosh Shilimkar
• [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA   Santosh Shilimkar
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Santosh Shilimkar
• [PATCH v4 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode   Santosh Shilimkar
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Santosh Shilimkar
• [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA   Santosh Shilimkar
• [PATCH V3 39/63] GIC: Added dummy handlers for Power ManagementSuspend Resume   Santosh Shilimkar
• [PATCH V3 39/63] GIC: Added dummy handlers for PowerManagementSuspend Resume   Santosh Shilimkar
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Santosh Shilimkar
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache   Santosh Shilimkar
• [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain   Santosh Shilimkar
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH] ARM: Gemini: Add support for PCI BUS   Sergei Shtylyov
• [PATCH 08/54] ARM: aaec2000: irq_data conversion.   Sergei Shtylyov
• [PATCH 12/54] ARM: davinci: irq_data conversion.   Sergei Shtylyov
• [PATCH 22/54] ARM: iop33x: irq_data conversion.   Sergei Shtylyov
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH 47/54] ARM: versatile: irq_data conversion.   Sergei Shtylyov
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH] ARM: Add writethrough dcache support for ARM926EJS processor   Sergei Shtylyov
• [PATCH v2] ata: pata_at91.c bugfix for high master clock   Sergei Shtylyov
• [PATCH v2] ata: pata_at91.c bugfix for high master clock   Sergei Shtylyov
• [PATCH 04/16] ARM: Dove: Remove PXA compatibility IRQ defines.   Sergei Shtylyov
• [PATCH 2/7] msm: Physical offset for MSM8960   Sergei Shtylyov
• [PATCH] MTD: m25p80: add debugging trace in sst_write()   Sergei Shtylyov
• [Patch v4] AM35xx: Craneboard: Add USB EHCI support   Sergei Shtylyov
• [PATCH v4 1/2 (REPOST)] davinci: am18x/da850/omap-l138: add support for higher speed grades   Sergei Shtylyov
• [PATCH] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Sergei Shtylyov
• [PATCH] davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs   Sergei Shtylyov
• [PATCH] video: imxfb: Fix the maximum value for yres   Sergei Shtylyov
• [PATCH 47/54] ARM: versatile: irq_data conversion.   Sergei Shtylyov
• [PATCH v2] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Sergei Shtylyov
• [PATCH v2] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Sergei Shtylyov
• [RFC PATCH] mxc_timer1 patch on imx25   Baruch Siach
• [PATCH 05/10] gpio: pl061: irq_data conversion.   Baruch Siach
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Baruch Siach
• [PATCH 06/10] ARM: mx28: update clocks for dual fec support   Baruch Siach
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Baruch Siach
• SPI support for CE4100, v2   Sebastian Andrzej Siewior
• [PATCH 1/9] spi/pxa2xx: register driver properly   Sebastian Andrzej Siewior
• [PATCH 2/9] spi/pxa2xx: add support for shared IRQ handler   Sebastian Andrzej Siewior
• [PATCH 3/9] spi/pxa2xx: Use define for SSSR_TFL_MASK instead of plain numbers   Sebastian Andrzej Siewior
• [PATCH 4/9] arm/pxa2xx: reorgazine SSP and SPI header files   Sebastian Andrzej Siewior
• [PATCH 5/9] spi/pxa2xx: Add CE4100 support   Sebastian Andrzej Siewior
• [PATCH 6/9] spi/pxa2xx: Consider CE4100's FIFO depth   Sebastian Andrzej Siewior
• [PATCH 7/9] spi/pxa2xx: Add chipselect support for Sodaville   Sebastian Andrzej Siewior
• [PATCH 8/9] spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.   Sebastian Andrzej Siewior
• [PATCH 9/9] spi/pxa2xx: pass of_node to spi device and set a parent device   Sebastian Andrzej Siewior
• I2C support for CE4100, v2   Sebastian Andrzej Siewior
• [PATCH 1/6] i2c/pxa2xx: Don't touch ISAR on X86   Sebastian Andrzej Siewior
• [PATCH 2/6] arm/pxa2xx: reorganize I2C files   Sebastian Andrzej Siewior
• [PATCH 3/6] i2c/pxa2xx: Add PCI support for PXA I2C controller   Sebastian Andrzej Siewior
• [PATCH 4/6] i2c/pxa2xx: add support for shared IRQ handler   Sebastian Andrzej Siewior
• [PATCH 5/6] i2c/pxa2xx: check timeout correctly   Sebastian Andrzej Siewior
• [PATCH 6/6] i2c/pxa2xx: pass of_node from platform driver to adapter and publish   Sebastian Andrzej Siewior
• [PATCH 1/6] i2c/pxa2xx: Don't touch ISAR on X86   Sebastian Andrzej Siewior
• [sodaville] [PATCH 1/6] i2c/pxa2xx: Don't touch ISAR on X86   Sebastian Andrzej Siewior
• [sodaville] SPI support for CE4100, v2   Sebastian Andrzej Siewior
• [PATCH 1/2] arm/pxa: fix build of it8152   Sebastian Andrzej Siewior
• [PATCH 2/2] arm/pxa: buildfix for pam27x without fb   Sebastian Andrzej Siewior
• [PATCH 1/9] spi/pxa2xx: register driver properly   Sebastian Andrzej Siewior
• [RFC v2 8/8] TILER-DMM: Linking TILER driver into the Linux kernel build   David Sin
• [RFC v2 0/8] TI DMM-TILER driver   David Sin
• [PATCH 0/9] TI DMM-TILER driver   David Sin
• [PATCH 1/9] TILER-DMM: DMM-PAT driver for TI TILER   David Sin
• [PATCH 2/9] TILER-DMM: Container manager interface and utility definitons   David Sin
• [PATCH 3/9] TILER-DMM: Sample TCM implementation: Simple TILER Allocator (SiTA)   David Sin
• [PATCH 4/9] TILER-DMM: TILER Memory Manager interface and implementation   David Sin
• [PATCH 5/9] TILER-DMM: TILER interface file and documentation   David Sin
• [PATCH 6/9] TILER-DMM: Geometry and view manipulation functions   David Sin
• [PATCH 7/9] TILER-DMM: Main TILER driver implementation   David Sin
• [PATCH 8/9] TILER-DMM: Linking TILER driver into the Linux kernel build   David Sin
• [PATCH 9/9] TILER-DMM: Device support for OMAP   David Sin
• [PATCH 7/9] TILER-DMM: Main TILER driver implementation   David Sin
• [PATCH 0/9] TI DMM-TILER driver   David Sin
• [PATCH 0/9] TI DMM-TILER driver   David Sin
• [PATCH 0/9] TI DMM-TILER driver   David Sin
• [PATCH 0/9] TI DMM-TILER driver   David Sin
• S3C OTG udc driver isochronous support   Barry Song
• S3C OTG udc driver isochronous support   Barry Song
• [PATCH 10/20] input/tc3589x: add tc3589x keypad support   Trilok Soni
• [PATCH] msm: trout: add keypad support   Trilok Soni
• [PATCH] msm: trout: add keypad support   Trilok Soni
• [PATCH] msm: trout: add keypad support   Trilok Soni
• [PATCH] msm: trout: add keypad support   Trilok Soni
• [PATCH] omap: rx51: Remove tvout code that plays with gpio 40   Srikar
• [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code   Vishwanath Sripathy
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.   Vishwanath Sripathy
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.   Vishwanath Sripathy
• [patch 1/2] imx51: fix gpiolib support   Alexander Stein
• [PATCH 09/10] MCDE: Add build files and bus   Peter Stuge
• [PATCH 0/4][RFC] Trivial ARM related Android patches   John Stultz
• [PATCH 1/4] avoid mis-detecting some V7 cores in the decompressor   John Stultz
• [PATCH 2/4] Optionally flush entire dcache from v6_dma_flush_range   John Stultz
• [PATCH 3/4] process: Add display of memory around registers when displaying regs.   John Stultz
• [PATCH 4/4] Do not call flush_cache_user_range with mmap_sem held   John Stultz
• [PATCH v2] ARM: ux500: prcmu db8500 v2 support   Sundar
• [PATCH 3/4] plat-s5p: Add platform support for MIPI-CSI2 devices   Marek Szyprowski
• [PATCH for 2.6.37] S5PV210: update MAX8998 platform data to get rid of WARN()   Marek Szyprowski
• [PATCH 4/4 v2] ARM: S5PV210: Add clock definition for MIPI-CSIS DPHY   Marek Szyprowski
• [PATCH 4/4 v2] ARM: S5PV210: Add clock definition for MIPI-CSIS DPHY   Marek Szyprowski
• [PATCHv8 00/12] Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv8 00/12] Contiguous Memory Allocator   Marek Szyprowski
• [PATCH] ARM: Add Kconfig entry for SG chain support   FUJITA Tomonori
• [PATCH 1/2] ARM: convert dma-mapping to asm-generic API   FUJITA Tomonori
• [PATCH] Keyboard: omap-keypad: use matrix_keypad.h   Dmitry Torokhov
• [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h   Dmitry Torokhov
• [PATCH v3] Keyboard: omap-keypad: use matrix_keypad.h   Dmitry Torokhov
• still nfs problems [Was: Linux 2.6.37-rc8]   Linus Torvalds
• still nfs problems [Was: Linux 2.6.37-rc8]   Linus Torvalds
• still nfs problems [Was: Linux 2.6.37-rc8]   Linus Torvalds
• [RFC PATCH] mxc_timer1 patch on imx25   Michael Trimarchi
• [RFC PATCH] mxc_timer1 patch on imx25   Michael Trimarchi
• [PATCH 0/6] Series short description   Colin Tuckley
• [PATCH 1/6] ARM: enable bridges in pci_common_init.   Colin Tuckley
• [PATCH 2/6] Realview PCIX support - add main support module code   Colin Tuckley
• [PATCH 3/6] ARM Realview PCIX map include file changes   Colin Tuckley
• [PATCH 4/6] ARM Realview PCIX IRQ include file changes   Colin Tuckley
• [PATCH 5/6] ARM Realview PCIX board file changes   Colin Tuckley
• [PATCH 6/6] ARM Realview PCIX build file changes   Colin Tuckley
• [PATCH 0/6] Add PCI support for ARM RealView boards   Colin Tuckley
• [PATCH 3/6] ARM Realview PCIX map include file changes   Colin Tuckley
• [PATCH 00/10] net/fec: add dual fec support for i.MX28   Greg Ungerer
• [PATCH 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac   Greg Ungerer
• [PATCH 0/3] OMAP: Introduce Backlight driver for Sharp LS037V7DW01 LCD panel   Tomi Valkeinen
• [PATCH] OMAP: DSS: VRAM: Align start & size of vram to 2M   Tomi Valkeinen
• Mainline OMAP3 breakage (and other OMAP?)   Tomi Valkeinen
• OMAP4 build error - omapfb   Tomi Valkeinen
• [PATCH 0/3] OMAP: Introduce Backlight driver for Sharp LS037V7DW01 LCD panel   Tomi Valkeinen
• [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900   Tomi Valkeinen
• [PATCH] omap: rx51: Remove tvout code that plays with gpio 40   Tomi Valkeinen
• [RFC v2 1/8] TILER-DMM: DMM-PAT driver for TI TILER   Varadarajan, Charulatha
• [RFC v2 0/8] TI DMM-TILER driver   Varadarajan, Charulatha
• [RFC v2 1/8] TILER-DMM: DMM-PAT driver for TI TILER   Varadarajan, Charulatha
• [RFC v2 1/8] TILER-DMM: DMM-PAT driver for TI TILER   Varadarajan, Charulatha
• [PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device   Varadarajan, Charulatha
• [PATCH v8 10/11] OMAP: GPIO: Implement GPIO as a platform device   Varadarajan, Charulatha
• [PATCH v8 04/11] OMAP7xx: GPIO: Introduce support for GPIO init   Varadarajan, Charulatha
• [PATCH v8 10/11] OMAP: GPIO: Implement GPIO as a platform device   Varadarajan, Charulatha
• [PATCH 12/11] omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx   Varadarajan, Charulatha
• [PATCH RESEND] ARM: io: fix namespace conflicts   Varadarajan, Charulatha
• [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling   Varadarajan, Charulatha
• [PATCH v4 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod   Varadarajan, Charulatha
• [PATCH v1] OMAP: GPIO: Correct IP version message during boot   Varadarajan, Charulatha
• [PATCH v1] OMAP: GPIO: Correct IP version message during boot   Varadarajan, Charulatha
• [PATCH] arm/income pxa270: enable backlight when pwm_bl is a module   Marek Vasut
• [PATCH v2] OMAP4: Pandaboard: Add omap_reserve functionality   Marek Vasut
• [PATCH] ARM: colibri-pxa300: use correct SD detect pin   Marek Vasut
• [PATCH] ARM: colibri-pxa300: use correct SD detect pin   Marek Vasut
• [PATCH 0/2] New year's pxa fixes   Marek Vasut
• [PATCH 1/2] pxa: Fix warning in zeus.c   Marek Vasut
• [PATCH 2/2] pxa: Remove unused variable in clock-pxa3xx.c   Marek Vasut
• [PATCH 09/10] MCDE: Add build files and bus   Daniel Vetter
• [PATCH] ux500: minor revision to the eMMC/SD config   Rabin Vincent
• [PATCH 1/9] ux500: fix uncompressor UART address for U5500   Rabin Vincent
• [PATCH 2/9] nomadik-gpio: use dev name if no name is specified   Rabin Vincent
• [PATCH 3/9] ux500: rework gpio registration   Rabin Vincent
• [PATCH 4/9] ux500: remove ambiguous irq macros   Rabin Vincent
• [PATCH 5/9] ux500: remove build-time changing macros   Rabin Vincent
• [PATCH 6/9] ux500: rename MOP board Kconfig   Rabin Vincent
• [PATCH 7/9] ux500: dynamic SOC detection   Rabin Vincent
• [PATCH 8/9] ux500: modem_irq is only for 5500   Rabin Vincent
• [PATCH 9/9] ux500: allow 5500 and 8500 to be built together   Rabin Vincent
• [PATCH] ux500: fix 5500 PER6 clock rate   Rabin Vincent
• [PATCH 50/54] ARM: plat-nomadik: irq_data conversion.   Rabin Vincent
• [PATCH] ARM: ensure all sched_clock() implementations are notrace marked   Rabin Vincent
• [PATCH] ARM: ensure all sched_clock() implementations are notrace marked   Rabin Vincent
• [PATCH] GIC: Assign correct flow handler type in set_type callback   Rabin Vincent
• [PATCH] msm: smd: Add smd_tty driver   Niranjana Vishwanathapura
• [PATCH] msm: smd: Add smd_pkt driver   Niranjana Vishwanathapura
• [PATCH] msm: rmnet: msm rmnet smd virtual ethernet driver   Niranjana Vishwanathapura
• [PATCH 0/5] MSM RPC Patches   Niranjana Vishwanathapura
• [PATCH 1/5] msm: rpc: shared memory rpc router   Niranjana Vishwanathapura
• [PATCH 2/5] msm: rpc: Add userspace rpc support.   Niranjana Vishwanathapura
• [PATCH 3/5] msm: rpc: Add support for RPC servers   Niranjana Vishwanathapura
• [PATCH 4/5] msm: rpc: dog keepalive rpc server support   Niranjana Vishwanathapura
• [PATCH 5/5] msm: rpc: ping modem client driver   Niranjana Vishwanathapura
• [PATCH 1/1] ARM: cns3xxx: ahci: Fixup for softwreset failures with direct connected disks with CONFIG_SATA_PMP enabled.   Anton Vorontsov
• [GIT PULL] Cavium CNS3xxx updates for 2.6.38   Anton Vorontsov
• [PATCH 1/1] ARM: cns3xxx: ahci: Fixup for softwreset failures with direct connected disks with CONFIG_SATA_PMP enabled.   Anton Vorontsov
• [PATCH] mmci: drop superfluous regulator #ifdef   Linus WALLEIJ
• [PATCH] mmci: partially revert clock divisor code   Linus WALLEIJ
• [PATCH 16/24] ARM: U300: update clock source registration   Linus WALLEIJ
• [PATCH 20/24] ARM: nomadik: update clock source registration   Linus WALLEIJ
• [PATCH 1/4] msm: trout: add gpio_to_irq   Daniel Walker
• [PATCH 2/4] msm: add CLK_MINMAX to pmdh_clk   Daniel Walker
• [PATCH 3/4] msm: trout: change name of pmdh_clk to mddi_clk   Daniel Walker
• [PATCH 4/4] msm: add handling for clocks tagged as CLK_MINMAX   Daniel Walker
• [PATCH 0/22] More SMP cleanup   Daniel Walker
• [PATCHv3 2/4] ARM: Allow machines to override __delay()   Daniel Walker
• [PATCHv3 2/4] ARM: Allow machines to override __delay()   Daniel Walker
• [PATCHv3 2/4] ARM: Allow machines to override __delay()   Daniel Walker
• [PATCH] msm: trout: add keypad support   Daniel Walker
• [PATCH] msm: trout: add keypad support   Daniel Walker
• [PATCH] msm: trout: add keypad support   Daniel Walker
• [PATCH] MAINTAINERS: update MSM git tree   Daniel Walker
• [PATCH] msm: trout: add keypad support   Daniel Walker
• [PATCH] msm: trout: add keypad support   Daniel Walker
• [PATCH v2 1/5] msm: trout: add gpio_to_irq   Daniel Walker
• [PATCH v2 2/5] msm: add CLK_MINMAX to pmdh_clk   Daniel Walker
• [PATCH v2 3/5] msm: trout: change name of pmdh_clk to mddi_clk   Daniel Walker
• [PATCH v2 4/5] msm: add handling for clocks tagged as CLK_MINMAX   Daniel Walker
• [PATCH v2 5/5] msm: initial framebuffer support   Daniel Walker
• [PATCH 1/2] msm: gpiomux: Improve gpiomux interface design.   Daniel Walker
• [PATCH 2/7] msm: Physical offset for MSM8960   Daniel Walker
• [PATCH 2/7] msm: Physical offset for MSM8960   Daniel Walker
• [PATCH 2/7] msm: Physical offset for MSM8960   Daniel Walker
• [PATCH] hvc_dcc: Simplify assembly for v6 and v7 ARM   Daniel Walker
• [PATCH] mmci: supply per-instance regulator name   Linus Walleij
• [PATCH] mmci: supply per-instance regulator name   Linus Walleij
• [PATCH] mmci: drop superfluous regulator #ifdef   Linus Walleij
• [PATCH] mmci: corrected calculation of clock div for ux500   Linus Walleij
• [PATCH] mmci: corrected calculation of clock div for ux500   Linus Walleij
• [PATCH] ux500: minor revision to the eMMC/SD config   Linus Walleij
• [PATCH] ux500: minor revision to the eMMC/SD config   Linus Walleij
• [PATCH] mmci: corrected calculation of clock div for ux500 v2   Linus Walleij
• [PATCH 0/3] ux500: Add support to boot from eMMC for U5500   Linus Walleij
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Linus Walleij
• [PATCH] mmci: partially revert clock divisor code   Linus Walleij
• [PATCH 1/9] ux500: fix uncompressor UART address for U5500   Linus Walleij
• [PATCH 1/2] arm: ux500: Add prcmu support for operating points   Linus Walleij
• [PATCH 01/20] mfd/ab8500: remove spi support   Linus Walleij
• [PATCH 03/20] mach-ux500: move keymaps to new file   Linus Walleij
• [PATCH 05/20] mach-ux500: add STMPE1601 platform data   Linus Walleij
• [PATCH 00/20] ux500: platform data, TC3589x keypad driver   Linus Walleij
• [PATCH 0/13] 64-bit sched_clock   Linus Walleij
• [PATCH 36/40] ARM: nomadik: convert sched_clock() to use new infrastructure   Linus Walleij
• [PATCH 34/40] ARM: u300: convert sched_clock() to use new infrastructure   Linus Walleij
• [PATCH 5/9] ux500: remove build-time changing macros   Linus Walleij
• [PATCH] ARM: update Nomadik, U300 and Ux500 maintainers   Linus Walleij
• [PATCH] ux500: rename modem IRQ and MBOX files   Linus Walleij
• [PATCH v3 1/1] input/tc3589x: add tc3589x keypad support   Linus Walleij
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Linus Walleij
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Linus Walleij
• [PATCH] ARM: add PrimeCell generic DMA to PL011   Linus Walleij
• [PATCH] ARM: add PrimeCell generic DMA to MMCI/PL180   Linus Walleij
• Git pull request: ux500-core for the v2.6.38 merge window   Linus Walleij
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Linus Walleij
• [PATCH V3 36/63] ST SPEAr : FSMC (Flexible Static Memory Controller) NOR interface driver   Linus Walleij
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Linus Walleij
• [PATCH] TWD: enable one-shot mode   Linus Walleij
• [PATCH 00/11] PL08x DMA driver updates   Linus Walleij
• [PATCH 5/6] ARM: PL011: Add support for transmit DMA   Linus Walleij
• [PATCH 0/6] PL011 DMA support   Linus Walleij
• Git pull request: ux500-core for the v2.6.38 merge window   Linus Walleij
• [PATCH] ARM: mach-ux500: AB8500 irqs is taken from header file   Mattias Wallin
• [PATCH v2] ARM: ux500: prcmu db8500 v2 support   Mattias Wallin
• [PATCH 5/7 v2] OMAP3: clocks: Update clock domain name for mcspi fck   Paul Walmsley
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Paul Walmsley
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Paul Walmsley
• [PATCH 00/14] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part one   Paul Walmsley
• [PATCH 01/14] OMAP: powerdomain: Move static allocations from powerdomains.h to a .c file   Paul Walmsley
• [PATCH 02/14] OMAP: powerdomain: Infrastructure to put arch specific code   Paul Walmsley
• [PATCH 03/14] OMAP: powerdomain: Arch specific funcs for state control   Paul Walmsley
• [PATCH 04/14] OMAP: powerdomain: Arch specific funcs for logic control   Paul Walmsley
• [PATCH 05/14] OMAP: powerdomain: Arch specific funcs for mem control   Paul Walmsley
• [PATCH 06/14] OMAP4: powerdomain: Add pwrdm_clear_all_prev_pwrst   Paul Walmsley
• [PATCH 07/14] OMAP2+: powerdomains: move powerdomain static data to .c files   Paul Walmsley
• [PATCH 08/14] OMAP2+: clockdomains: move clockdomain static data to .c files   Paul Walmsley
• [PATCH 09/14] OMAP3: control/PRCM: add omap3_ctrl_write_boot_mode()   Paul Walmsley
• [PATCH 10/14] OMAP3: control/PRCM: move CONTROL_PADCONF_SYS_NIRQ save/restore to SCM code   Paul Walmsley
• [PATCH 11/14] OMAP4: PRCM: reorganize existing OMAP4 PRCM header files   Paul Walmsley
• [PATCH 12/14] OMAP4: PRCM: rename _MOD macros to _INST   Paul Walmsley
• [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files   Paul Walmsley
• [PATCH 14/14] OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore   Paul Walmsley
• [PATCH RESEND] MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership   Paul Walmsley
• [PATCH] OMAP1: I2C: fix device initialization   Paul Walmsley
• [PATCH] OMAP2+: PM/serial: fix console semaphore acquire during suspend   Paul Walmsley
• [PATCH] OMAP2+: PM/serial: fix console semaphore acquire during suspend   Paul Walmsley
• [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part two   Paul Walmsley
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutator functions   Paul Walmsley
• [PATCH 02/11] OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file   Paul Walmsley
• [PATCH 03/11] OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"   Paul Walmsley
• [PATCH 04/11] OMAP4: powerdomains: add PRCM partition data; use OMAP4 PRM functions   Paul Walmsley
• [PATCH 05/11] OMAP2+: clockdomains: split the clkdm hwsup enable/disable function   Paul Walmsley
• [PATCH 06/11] OMAP4: CM instances: add clockdomain register offsets   Paul Walmsley
• [PATCH 07/11] OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support   Paul Walmsley
• [PATCH 08/11] OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses   Paul Walmsley
• [PATCH 09/11] OMAP2+: clockdomain: move header file from plat-omap to mach-omap2   Paul Walmsley
• [PATCH 10/11] OMAP2+: powerdomain: move header file from plat-omap to mach-omap2   Paul Walmsley
• [PATCH 11/11] OMAP3: control/PM: move padconf save code to mach-omap2/control.c   Paul Walmsley
• [PATCH 00/14] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part one   Paul Walmsley
• [PATCH 11/14] OMAP4: PRCM: reorganize existing OMAP4 PRCM header files   Paul Walmsley
• [PATCH 11/14] OMAP4: PRCM: reorganize existing OMAP4 PRCM header files   Paul Walmsley
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Paul Walmsley
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Paul Walmsley
• [PATCH 05/11] OMAP2+: clockdomains: split the clkdm hwsup enable/disable function   Paul Walmsley
• [PATCH] OMAP2+: clockdomains: split the clkdm hwsup enable/disable function   Paul Walmsley
• git.pwsan.com *_2.6.38 branches rebased to Tony's for-next branch   Paul Walmsley
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   Paul Walmsley
• [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part two   Paul Walmsley
• [PATCH v2 4/8] OMAP4: clock data: Add missing fields in iva_hsd_byp_clk_mux_ck   Paul Walmsley
• [PATCH 05/11] OMAP2+: clockdomains: split the clkdm hwsup enable/disable function   Paul Walmsley
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Paul Walmsley
• [PATCH] OMAP1: clock_data: use runtime cpu / machine checks   Paul Walmsley
• [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one   Paul Walmsley
• [PATCH 01/12] OMAP4: clock data: Add control for pad_clks_ck and slimbus_clk   Paul Walmsley
• [PATCH 02/12] OMAP3: clock data: Add "wkup_clkdm" in sr1_fck and sr2_fck   Paul Walmsley
• [PATCH 03/12] OMAP4: clock data: Add missing DPLL x2 clock nodes   Paul Walmsley
• [PATCH 04/12] OMAP4: clock data: Add missing fields in iva_hsd_byp_clk_mux_ck   Paul Walmsley
• [PATCH 05/12] OMAP4: PRCM: Add SCRM header file   Paul Walmsley
• [PATCH 06/12] OMAP4: clock data: Add SCRM auxiliary clock nodes   Paul Walmsley
• [PATCH 07/12] OMAP4: clock data: Export control to enable/disable CORE/PER M3 clocks   Paul Walmsley
• [PATCH 08/12] OMAP2xxx clock: fix dss2_fck recalc to use clksel   Paul Walmsley
• [PATCH 09/12] OMAP3: clock: clarify usage of struct clksel_rate.flags and struct omap_clk.cpu   Paul Walmsley
• [PATCH 10/12] OMAP3: clock: fix incorrect rate display when switching MPU rate at boot   Paul Walmsley
• [PATCH 11/12] OMAP2/3: SRAM: add comment about crashes during a TLB miss   Paul Walmsley
• [PATCH 12/12] OMAP1: clock_data: use runtime cpu / machine checks   Paul Walmsley
• [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain   Paul Walmsley
• [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one   Paul Walmsley
• [PATCH 05/12] OMAP4: PRCM: Add SCRM header file   Paul Walmsley
• [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va   Paul Walmsley
• [PATCH 0/5] OMAP4: hwmod data fixes and update   Paul Walmsley
• [PATCH 1/5] OMAP4: hwmod data: Fix hwmod entries order   Paul Walmsley
• [PATCH 5/5] OMAP4: hwmod & clock data: Fix GPIO opt_clks and ocp_if iclk   Paul Walmsley
• [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va   Paul Walmsley
• [PATCH 05/12] OMAP4: PRCM: Add SCRM header file   Paul Walmsley
• [PATCH 05/12] OMAP4: PRCM: Add SCRM header file   Paul Walmsley
• [PATCH v1 3/9] OMAP2420: hwmod data: add system DMA   Paul Walmsley
• [PATCH v1 4/9] OMAP2430: hwmod data: add system DMA   Paul Walmsley
• [PATCH] OMAP2+: omap_hwmod: fix wakeup enable/disable for consistency   Paul Walmsley
• [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two   Paul Walmsley
• [PATCH 6/8] OMAP2+: hwmod: upgrade per-hwmod mutex to a spinlock   Paul Walmsley
• [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two   Paul Walmsley
• [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files   Paul Walmsley
• [PATCH 10/11] OMAP2+: powerdomain: move header file from plat-omap to mach-omap2   Paul Walmsley
• [PATCH 09/11] OMAP2+: clockdomain: move header file from plat-omap to mach-omap2   Paul Walmsley
• [PATCH 10/11] OMAP2+: powerdomain: move header file from plat-omap to mach-omap2   Paul Walmsley
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Paul Walmsley
• [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va   Paul Walmsley
• [PATCH v1 4/9] OMAP2430: hwmod data: add system DMA   Paul Walmsley
• [PATCH v1 3/9] OMAP2420: hwmod data: add system DMA]   Paul Walmsley
• [PATCH v2 3/9] OMAP2420: hwmod data: add system DMA   Paul Walmsley
• [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA   Paul Walmsley
• [PATCH v2 3/9] OMAP2420: hwmod data: add system DMA   Paul Walmsley
• [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA   Paul Walmsley
• [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions   Paul Walmsley
• [PATCH 0/6] omap: Board specific muxing using hwmod   Paul Walmsley
• [PATCH 3/3] OMAP: wd_timer: remove old, dead probing code   Paul Walmsley
• [PATCH 1/8] OMAP2+: io: split omap2_init_common_hw()   Paul Walmsley
• [PATCH v2 0/7] OMAP4: hwmod data fixes and update   Paul Walmsley
• [PATCH v2 0/6] OMAP: hwmod core fix and cleanup for 2.6.38   Paul Walmsley
• [PATCH] OMAP3: clocks: Update clock domain name for mcspi fck   Paul Walmsley
• [PATCH] OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4   Paul Walmsley
• [PATCH 03/12] OMAP4: clock data: Add missing DPLL x2 clock nodes   Paul Walmsley
• [PATCH 1/3] OMAP2+: powerdomain: add API to get context loss count   Paul Walmsley
• [PATCH 1/3] OMAP2+: powerdomain: add API to get context loss count   Paul Walmsley
• [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain   Paul Walmsley
• [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain   Paul Walmsley
• [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain   Paul Walmsley
• [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files   Paul Walmsley
• [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files   Paul Walmsley
• [PATCH] OMAP4: clocks: add dummy clock for mailbox   Paul Walmsley
• [PATCH 3/3] OMAP: PM noop: implement context loss count for non-omap_devices   Paul Walmsley
• [PATCH 3/3] OMAP: PM noop: implement context loss count for non-omap_devices   Paul Walmsley
• [GIT PULL] OMAP: core/PM architecture: pull request for 2.6.38   Paul Walmsley
• [GIT PULL v2] OMAP: core/PM architecture: pull request for 2.6.38   Paul Walmsley
• [PATCH v2 8/8] OMAP4: clock data: Add missing fixed divisors   Paul Walmsley
• [GIT PULL v3] OMAP: core/PM architecture: pull request for 2.6.38   Paul Walmsley
• [RFC] Make SMP secondary CPU up more resilient to failure.   Andrei Warkentin
• [RFC] Make SMP secondary CPU up more resilient to failure.   Andrei Warkentin
• [RFC] Make SMP secondary CPU up more resilient to failure.   Andrei Warkentin
• [RFC] Make SMP secondary CPU up more resilient to failure.   Andrei Warkentin
• [RFC] Make SMP secondary CPU up more resilient to failure.   Andrei Warkentin
• [RFC] Make SMP secondary CPU up more resilient to failure.   Andrei Warkentin
• [RFC] Make SMP secondary CPU up more resilient to failure.   Andrei Warkentin
• [RFC] Make SMP secondary CPU up more resilient to failure.   Andrei Warkentin
• [PATCH 01/11] ARM: Add SZ_128   Stephen Warren
• [PATCH] ARM: Add missing SZ_{32,64,128}   Stephen Warren
• [PATCH] ARM: Add missing SZ_{32,64,128}   Stephen Warren
• [patch 1/2] imx51: fix gpiolib support   Lothar Waßmann
• [PATCH v2 07/15] ARM: mxs: Add gpio support   Lothar Waßmann
• [PATCH v2 08/15] ARM: mxs: Add iomux support   Lothar Waßmann
• [PATCH v3 03/15] ARM: mxs: Add reset routines   Lothar Waßmann
• [PATCH v2 04/15] ARM: mxs: Add interrupt support   Lothar Waßmann
• [PATCH v3 06/15] ARM: mxs: Add timer support   Lothar Waßmann
• [PATCH v2 08/15] ARM: mxs: Add iomux support   Lothar Waßmann
• [PATCH v2 14/15] ARM: mxs: Add initial mx28evk support   Lothar Waßmann
• [PATCH v3 08/15] ARM: mxs: Add iomux support   Lothar Waßmann
• [PATCH v3 07/15] ARM: mxs: Add gpio support   Lothar Waßmann
• [PATCH 5/9] Add i.MX5 framebuffer driver   Lothar Waßmann
• [PATCH v5 07/15] ARM: mxs: Add gpio support   Lothar Waßmann
• [PATCH] i.MX51: Full iomux support   Lothar Waßmann
• [PATCH] i.MX51: Full iomux support   Lothar Waßmann
• [PATCH] i.MX51: Full iomux support   Lothar Waßmann
• [PATCH] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines   Thomas Weber
• [PATCH] OMAP3: Devkit8000: Add DEBUG_LL support   Thomas Weber
• [PATCH V3 0/6] pxa3xx_nand update series set   Lei Wen
• [PATCH] OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+   Mika Westerberg
• [PATCH] i.MX SDMA without firmware   Dan Williams
• [PATCH] ARM: iop: ensure sched_clock() is notrace   Dan Williams
• [PATCH 20/54] ARM: iop13xx: irq_data conversion.   Dan Williams
• [PATCH 1/2] dmaengine i.MX SDMA: initialize on module_init   Dan Williams
• [PATCH 2/2] dmaengine i.MX SDMA: protect channel0   Dan Williams
• [PATCH] dmaengine: at_hdmac: fix buffer transfer size specification   Dan Williams
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Dan Williams
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Dan Williams
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Dan Williams
• [PATCH 06/13] DMAENGINE: driver for the ARM PL080/PL081 PrimeCells   Dan Williams
• [PATCH] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Michael Williamson
• [PATCH] davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs   Michael Williamson
• [PATCH] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Michael Williamson
• [PATCH] davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs   Michael Williamson
• [PATCH v1] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Michael Williamson
• [PATCH v1] davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs   Michael Williamson
• [PATCH v1] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Michael Williamson
• [PATCH v2] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Michael Williamson
• [PATCH v2] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Michael Williamson
• [PATCH v3] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Michael Williamson
• [PATCH] davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs   Michael Williamson
• [PATCH v3] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Michael Williamson
• [PATCH v4] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs   Michael Williamson
• [PATCH v2] davinci: Support various speedgrades for MityDSP-L138 and MityARM-1808 SoMs   Michael Williamson
• [PATCH 1/2] davinci: Support disabling modem status interrupts on SOC UARTS   Michael Williamson
• [PATCH 2/2] davinci: mityomapl138 platform: disable MS interrupts on UART1   Michael Williamson
• [PATCH] pl011: added clock management feature   Vitaly Wool
• [PATCH] pl011: added clock management feature   Vitaly Wool
• [PATCH v3] OMAP2+: PM/serial: fix console semaphore acquire during suspend   Vitaly Wool
• [PATCH 1/3] Backlight: driver for Sharp LS037V7DW01 panel on OMAP machine   Bryan Wu
• [PATCH 0/3] OMAP: Introduce Backlight driver for Sharp LS037V7DW01 LCD panel   Bryan Wu
• [PATCH] ARM: GIC irq desciptor bug fix   Chao Xie
• arm cortex a9 localtimer and global timer   Chao Xie
• arm cortex_a9_mpcore timer: local timer and global timer   Chao Xie
• ks8695_gettimeoffset   Yegor Yefremov
• [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support   Liu Ying
• [PATCH 3/9] Add a mfd IPUv3 driver   Liu Ying
• [PATCH 5/9] Add i.MX5 framebuffer driver   Liu Ying
• [PATCH 5/9] Add i.MX5 framebuffer driver   Liu Ying
• [PATCH 3/9] Add a mfd IPUv3 driver   Liu Ying
• [PATCH 5/9] Add i.MX5 framebuffer driver   Liu Ying
• [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support   Liu Ying
• [PATCH 3/9] Add a mfd IPUv3 driver   Liu Ying
• [PATCH 5/9] Add i.MX5 framebuffer driver   Liu Ying
• [PATCH 0/4] Modify configures to support Samsung ASoC dependancyless   Seungwhan Youn
• [PATCH 1/4] ARM: Kconfig: Add audio support dependency   Seungwhan Youn
• [PATCH 2/4] ARM: SAMSUNG: Add SMDK audio configuration   Seungwhan Youn
• [PATCH 3/4] ASoC: SAMSUNG: Modify to indepedant depends on configuration   Seungwhan Youn
• [PATCH 4/4] ASoC: SAMSUNG: Apply modifications for SMDK audio configuations   Seungwhan Youn
• [alsa-devel] [PATCH 2/4] ARM: SAMSUNG: Add SMDK audio configuration   Seungwhan Youn
• [PATCH] ARM: Gemini: Add support for PCI BUS   Paulius Zaleckas
• [PATCH v2 1/2] ARM: mx5: introduce SOC_IMX51   Richard Zhao
• [PATCH 1/6] ARM: mx5: use config to define boot related addresses   Richard Zhao
• [PATCH 4/6] arm: mx5: always use __mxc_cpu_type to check cpu type   Richard Zhao
• [PATCH 6/6] arm: mx50: add mx50 reference design board support   Richard Zhao
• [PATCH 1/6] ARM: mx5: use config to define boot related addresses   Richard Zhao
• [PATCH 2/6] arm: plat-mxc: add full parameter macro to define gpio port   Richard Zhao
• [PATCH 3/6] arm: mx51: define mx51's own MXC_GPIO_IRQS   Richard Zhao
• [PATCH 4/6] arm: mx5: always use __mxc_cpu_type to check cpu type   Richard Zhao
• [PATCH 5/6] arm: mx50: add core functions support   Richard Zhao
• [PATCH 6/6] arm: mx50: add mx50 reference design board support   Richard Zhao
• [PATCH 1/6] ARM: mx5: use config to define boot related addresses   Richard Zhao
• [PATCH 5/6] arm: mx50: add core functions support   Richard Zhao
• [PATCH 5/6] arm: mx50: add core functions support   Richard Zhao
• [PATCH 5/6] arm: mx50: add core functions support   Richard Zhao
• [PATCH 5/6] arm: mx50: add core functions support   Richard Zhao
• [PATCH 1/3] Add a common struct clk   Richard Zhao
• [RFC] i.MX clock support   Richard Zhao
• [RFC] i.MX clock support   Richard Zhao
• [RFC] i.MX clock support   Richard Zhao
• [RFC] i.MX clock support   Richard Zhao
• bug in PL011 console   Richard Zhao
• bug in PL011 console   Richard Zhao
• [PATCH v2 1/8] ARM: mx5: use config to define boot related addresses   Richard Zhao
• [PATCH v2 2/8] arm: plat-mxc: add full parameter macro to define gpio port   Richard Zhao
• [PATCH v2 3/8] arm: mx51: define mx51's own MXC_GPIO_IRQS   Richard Zhao
• [PATCH v2 4/8] arm: mx5: mx51/53 have different mxc_cpu_type definition   Richard Zhao
• [PATCH v2 5/8] arm: mxc: move IOMUX_CONFIG_XXXX definitions to iomux-v3.h   Richard Zhao
• [PATCH v2 6/8] arm: mx50: add core functions support except clock   Richard Zhao
• [PATCH v2 1/8] ARM: mx5: use config to define boot related addresses   Richard Zhao
• [PATCH v2 5/8] arm: mxc: move IOMUX_CONFIG_XXXX definitions to iomux-v3.h   Richard Zhao
• [PATCH v2 6/8] arm: mx50: add core functions support except clock   Richard Zhao
• [PATCH v2 1/8] ARM: mx5: use config to define boot related addresses   Richard Zhao
• [PATCH v2 6/8] arm: mx50: add core functions support except clock   Richard Zhao
• [PATCH v3 1/8] ARM: mx5: use config to define boot related addresses   Richard Zhao
• [PATCH v3 2/8] arm: plat-mxc: add full parameter macro to define gpio port   Richard Zhao
• [PATCH v3 3/8] arm: mx51: define mx51's own MXC_GPIO_IRQS   Richard Zhao
• [PATCH v3 4/8] arm: mx5: mx51/53 have different mxc_cpu_type definition   Richard Zhao
• [PATCH v3 5/8] arm: mxc: move IOMUX_CONFIG_XXXX definitions to iomux-v3.h   Richard Zhao
• [PATCH v3 6/8] arm: mx50: add core functions support except clock   Richard Zhao
• [PATCH v3 7/8] arm: mx50: add mx50 reference design board support   Richard Zhao
• [PATCH v3 6/8] arm: mx50: add core functions support except clock   Richard Zhao
• [PATCH v3 6/8] arm: mx50: add core functions support except clock   Richard Zhao
• [PATCH v3 7/8] arm: mx50: add mx50 reference design board support   Richard Zhao
• [PATCH v3 1/8] ARM: mx5: use config to define boot related addresses   Richard Zhao
• [PATCH v4 1/8] ARM: mx5: use config to define boot related addresses   Richard Zhao
• [PATCH v4 2/8] arm: plat-mxc: add full parameter macro to define gpio port   Richard Zhao
• [PATCH v4 3/8] arm: mx51: define mx51's own MXC_GPIO_IRQS   Richard Zhao
• [PATCH v4 4/8] arm: mx5: mx51/53 have different mxc_cpu_type definition   Richard Zhao
• [PATCH v4 5/8] arm: mxc: move IOMUX_CONFIG_XXXX definitions to iomux-v3.h   Richard Zhao
• [PATCH v4 6/8] arm: mx50: add core functions support except clock   Richard Zhao
• [PATCH v4 7/8] arm: mx50: add mx50 reference design board support   Richard Zhao
• [PATCH v2 1/2] ARM i.MX53: Some bug fix about MX53 MSL code   Richard Zhao
• [PATCH v3 1/8] ARM: mx5: use config to define boot related addresses   Richard Zhao
• {PATCH] BCMRING maintainer change (was RE: [PATCH 02/24] ARM: bcmring: update clock source registration)   JD (Jiandong) Zheng
• [PATCH 0/40] Complete set of clocksource/sched_clock patches   JD (Jiandong) Zheng
• kfree in clkdev_drop()   Wei Zhong
• [PATCH 15/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Haojian Zhuang
• [PATCH 15/23] Alternative mmc structure to support pxa168, pxa910, mmp2 family SD   Haojian Zhuang
• mpcore watchdogs questions   Don Zickus
• mpcore watchdogs questions   Don Zickus
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Peter Zijlstra
• [PATCH] sched: Fix the irqtime code to deal with u64 wraps   Peter Zijlstra
• [PATCH] sched: Fix the irqtime code to deal with u64 wraps   Peter Zijlstra
• [PATCH 1/2] sched: Fix the irqtime code to deal with u64 wraps   Peter Zijlstra
• [PATCH 2/2] sched: Fix the irqtime code for 32bit   Peter Zijlstra
• [PATCH 1/2] sched: Fix the irqtime code to deal with u64 wraps   Peter Zijlstra
• [PATCH 16/16] ARM: w90x900: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Wan ZongShun
• [PATCH 16/16] ARM: w90x900: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Wan ZongShun
• [PATCH 16/16] ARM: w90x900: Switch over to gpiolib ->to_irq() and __gpio_to_irq().   Wan ZongShun
• [PATCH 17/40] ARM: nuc: update clock source registration   Wan ZongShun
• [REPOST][PATCH] Fix IGEPv2 second MMC channel power supply   Marc Zyngier
• No subject   tarek attia
• CpuFreq for mini2440   tarek attia
• CpuFreq for mini2440   tarek attia
• dma_cache_sync replacement call   y bhanu
• dma_cache_sync replacement call   y bhanu
• [PATCH] Kirkwood: Add support for 6282 based QNAP devices   saeed bishara
• [PATCH] msm: rmnet: msm rmnet smd virtual ethernet driver   nvishwan at codeaurora.org
• [PATCH] msm: rmnet: msm rmnet smd virtual ethernet driver   nvishwan at codeaurora.org
• [PATCH] msm: rmnet: msm rmnet smd virtual ethernet driver   nvishwan at codeaurora.org
• [PATCH] msm: rmnet: msm rmnet smd virtual ethernet driver   nvishwan at codeaurora.org
• [PATCH] arm: dma-mapping: move consistent_init to early_initcall   skannan at codeaurora.org
• [RFC] Make SMP secondary CPU up more resilient to failure.   murali at embeddedwireless.com
• [PATCHv2] ARM: imx: Add support for low power suspend on MX51.   Dinh.Nguyen at freescale.com
• [PATCHv2] support PMIC mc13892   b00984 at freescale.com
• [PATCH] support PMIC mc13892   yong.shen at freescale.com
• [PATCHv3] support PMIC mc13892   yong.shen at freescale.com
• [PATCHv4] regulator: support PMIC mc13892   yong.shen at freescale.com
• [PATCHv4] regulator: support PMIC mc13892   yong.shen at freescale.com
• [PATCH] Change the register name definitions for mc13783   yong.shen at freescale.com
• [PATCH] Change the register name definitions for mc13783   yong.shen at freescale.com
• patch serial for mc13783 and mc13892   yong.shen at freescale.com
• [PATCH 1/3] Change the register name definitions for mc13783   yong.shen at freescale.com
• [PATCH 2/3] make mc13783 regulator code generic   yong.shen at freescale.com
• [PATCH 3/3] regulator: support PMIC mc13892   yong.shen at freescale.com
• [PATCH 1/2] ARM i.MX53: Some bug fix about MX53 MSL code   yong.shen at freescale.com
• [PATCH 2/2] ARM i.MX53: Make MX53 EVK bootable   yong.shen at freescale.com
• [PATCH v2] ARM i.MX53 MSL patch set   yong.shen at freescale.com
• [PATCH v2 1/2] ARM i.MX53: Some bug fix about MX53 MSL code   yong.shen at freescale.com
• [PATCH v2 2/2] ARM i.MX53: Make MX53 EVK bootable   yong.shen at freescale.com
• Fwd: AT91 Interrupt nesting/priority disabled since kernel 2.6.35   avictor.za at gmail.com
• [PATCH] Kconfig: add new symbol MIGHT_HAVE_PCI   avictor.za at gmail.com
• Fwd: AT91 Interrupt nesting/priority disabled since kernel 2.6.35   avictor.za at gmail.com
• [PATCH 1/1] ARM: cns3xxx: ahci: Fixup for softwreset failures with direct connected disks with CONFIG_SATA_PMP enabled.   mkl0301 at gmail.com
• [PATCH v9 1/6] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v9 2/6] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v9 3/6] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v9 4/6] davinci: MMC/SD support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v9 5/6] davinci: USB clocks for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v9 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v10 1/6] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v10 2/6] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v10 3/6] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v10 4/6] davinci: MMC/SD support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v10 5/6] davinci: USB clocks for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v10 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v11 1/6] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v11 2/6] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v11 3/6] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v11 4/6] davinci: MMC/SD support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v11 5/6] davinci: USB clocks for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v11 6/6] davinci: USB1.1 support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support   arden jay
• [PATCH] ux500: remove unnecessary barrier from the secondary startup   srinidhi kasagar
• [PATCH 21/24] ARM: spear: update clock source registration   viresh kumar
• [PATCH V3 39/63] GIC: Added dummy handlers for Power Management Suspend Resume   viresh kumar
• [PATCH V3 39/63] GIC: Added dummy handlers for Power Management Suspend Resume   viresh kumar
• [PATCH V3 00/63] Updating SPEAr Support   viresh kumar
• [PATCH] ARM: GIC irq desciptor bug fix   Chao at marvell.com
• [Patch v3] AM35xx: Craneboard: Add USB EHCI support   srinath at mistralsolutions.com
• [Patch v4] AM35xx: Craneboard: Add USB EHCI support   srinath at mistralsolutions.com
• [Patch v5] AM35xx: Craneboard: Add USB EHCI support   srinath at mistralsolutions.com
• [PATCH v3] OMAP2+: disable idle early in the suspend sequence   jean.pihet at newoldbits.com
• [PATCH v3] OMAP3: clean up ASM idle code   jean.pihet at newoldbits.com
• [PATCH 0/7 v4] OMAP3: clean up ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses   jean.pihet at newoldbits.com
• [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 4/7] OMAP3: re-organize the ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths   jean.pihet at newoldbits.com
• [PATCH 6/7] OMAP3: add comments for low power code errata   jean.pihet at newoldbits.com
• [PATCH 7/7] OMAP3: ASM sleep code format rework   jean.pihet at newoldbits.com
• [PATCH 0/7 v5] OMAP3: clean up ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses   jean.pihet at newoldbits.com
• [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 4/7] OMAP3: re-organize the ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths   jean.pihet at newoldbits.com
• [PATCH 6/7] OMAP3: add comments for low power code errata   jean.pihet at newoldbits.com
• [PATCH 7/7] OMAP3: ASM sleep code format rework   jean.pihet at newoldbits.com
• [PATCH 0/7 v6] OMAP3: clean up ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses   jean.pihet at newoldbits.com
• [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 4/7] OMAP3: re-organize the ASM sleep code   jean.pihet at newoldbits.com
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths   jean.pihet at newoldbits.com
• [PATCH 6/7] OMAP3: add comments for low power code errata   jean.pihet at newoldbits.com
• [PATCH 7/7] OMAP3: ASM sleep code format rework   jean.pihet at newoldbits.com
• [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c   aaro.koskinen at nokia.com
• [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h   aaro.koskinen at nokia.com
• [PATCH 5/9] Add i.MX5 framebuffer driver   s.hauer at pengutronix.de
• Mail System Error - Returned Mail   white at po.state.ct.us
• [PATCH 0/5 v3] SMP support for msm   ykaoua at qualcomm.com
• [PATCH v3 1/5] msm: Secure Channel Manager (SCM) support   ykaoua at qualcomm.com
• [PATCH v3 2/5] msm: scm-boot: Support for setting cold/warm boot addresses   ykaoua at qualcomm.com
• [PATCH v3 3/5] msm: timer: SMP timer support for msm   ykaoua at qualcomm.com
• [PATCH v3 4/5] msm: hotplug: support cpu hotplug on msm   ykaoua at qualcomm.com
• [PATCH v3 5/5] msm: add SMP support for msm   ykaoua at qualcomm.com
• Question about ARM virtualization   rocky
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   john stultz
• [PATCH 1/5] msm: Secure Channel Manager (SCM) support   Valdis.Kletnieks at vt.edu
• Issue in kswapd daemon initilisation   naveen yadav
• mounting ext3 with readonly but there is some writing on it.   이춘길