[PATCH v4 5/8] arm: mxc: move IOMUX_CONFIG_XXXX definitions to iomux-v3.h
Richard Zhao
richard.zhao at freescale.com
Thu Dec 30 06:25:04 EST 2010
IOMUX_CONFIG_GPIO is not for iomux-v3. It's for old freescale
iomux routines. Remove it.
Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/plat-mxc/include/mach/iomux-mx51.h | 16 ----------------
arch/arm/plat-mxc/include/mach/iomux-mx53.h | 16 ----------------
arch/arm/plat-mxc/include/mach/iomux-v3.h | 15 +++++++++++++++
3 files changed, 15 insertions(+), 32 deletions(-)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index e1600f3..31af1f5 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -15,22 +15,6 @@
#include <mach/iomux-v3.h>
-/*
- * various IOMUX alternate output functions (1-7)
- */
-typedef enum iomux_config {
- IOMUX_CONFIG_ALT0,
- IOMUX_CONFIG_ALT1,
- IOMUX_CONFIG_ALT2,
- IOMUX_CONFIG_ALT3,
- IOMUX_CONFIG_ALT4,
- IOMUX_CONFIG_ALT5,
- IOMUX_CONFIG_ALT6,
- IOMUX_CONFIG_ALT7,
- IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
- IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
-} iomux_pin_cfg_t;
-
/* Pad control groupings */
#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_DSE_HIGH)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 80cb3c5..4155124 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -21,22 +21,6 @@
#include <mach/iomux-v3.h>
-/*
- * various IOMUX alternate output functions (1-7)
- */
-typedef enum iomux_config {
- IOMUX_CONFIG_ALT0,
- IOMUX_CONFIG_ALT1,
- IOMUX_CONFIG_ALT2,
- IOMUX_CONFIG_ALT3,
- IOMUX_CONFIG_ALT4,
- IOMUX_CONFIG_ALT5,
- IOMUX_CONFIG_ALT6,
- IOMUX_CONFIG_ALT7,
- IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
- IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
-} iomux_pin_cfg_t;
-
/* These 2 defines are for pins that may not have a mux register, but could
* have a pad setting register, and vice-versa. */
#define NON_MUX_I 0x00
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 811716f..e1fd71b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -54,6 +54,21 @@ typedef struct deprecated_pad_desc {
unsigned select_input:3;
} iomux_v3_cfg_t;
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+enum iomux_config {
+ IOMUX_CONFIG_ALT0,
+ IOMUX_CONFIG_ALT1,
+ IOMUX_CONFIG_ALT2,
+ IOMUX_CONFIG_ALT3,
+ IOMUX_CONFIG_ALT4,
+ IOMUX_CONFIG_ALT5,
+ IOMUX_CONFIG_ALT6,
+ IOMUX_CONFIG_ALT7,
+ IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
+};
+
static inline unsigned int MUX_CTRL_OFS(iomux_v3_cfg_t *pad)
{
return pad->mux_ctrl_ofs;
--
1.6.3.3
More information about the linux-arm-kernel
mailing list