[PATCH 02/12] OMAP3: clock data: Add "wkup_clkdm" in sr1_fck and sr2_fck
Paul Walmsley
paul at pwsan.com
Tue Dec 14 01:34:45 EST 2010
From: Benoit Cousson <b-cousson at ti.com>
The smartreflex modules belong to an ALWON_FCLK clock domain that
does not have any SW control. The gating of that interface clock
is triggered by a transition of the WKUP clock domain to idle.
Attach both smartreflex instances on OMAP3 to the WKUP clock domain.
The missing clock domain field in srX_fck clock nodes was reported by
Kevin during the discussion about smartreflex on OMAP3:
https://patchwork.kernel.org/patch/199342/
Signed-off-by: Benoit Cousson <b-cousson at ti.com>
Signed-off-by: Paul Walmsley <paul at pwsan.com>
Cc: Kevin Hilman <khilman at deeprootsystems.com>
---
arch/arm/mach-omap2/clock3xxx_data.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 0579604..94cbae3 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3044,6 +3044,7 @@ static struct clk sr1_fck = {
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_SR1_SHIFT,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -3054,6 +3055,7 @@ static struct clk sr2_fck = {
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_SR2_SHIFT,
+ .clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
More information about the linux-arm-kernel
mailing list