[PATCH] ARM: colibri-pxa300: use correct SD detect pin

[Marek Vasut]

On Thursday 23 December 2010 16:01:02 Bjørn Forsman wrote:
> The use of wrong SD detect pin was introduced by this commit:
> 
>   ARM: pxa: Push Colibri evalboard MFP into module files
> 
> This fixes it.

Ah, one more thing -- CC linux-arm-kernel (done)
> ---
>  arch/arm/mach-pxa/colibri-evalboard.c    |    2 +-
>  arch/arm/mach-pxa/colibri-pxa300.c       |    2 +-
>  arch/arm/mach-pxa/include/mach/colibri.h |    2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-pxa/colibri-evalboard.c
> b/arch/arm/mach-pxa/colibri-evalboard.c index 6b2c800..28f667e 100644
> --- a/arch/arm/mach-pxa/colibri-evalboard.c
> +++ b/arch/arm/mach-pxa/colibri-evalboard.c
> @@ -50,7 +50,7 @@ static void __init colibri_mmc_init(void)
>  			GPIO0_COLIBRI_PXA270_SD_DETECT;
>  	if (machine_is_colibri300())	/* PXA300 Colibri */
>  		colibri_mci_platform_data.gpio_card_detect =
> -			GPIO39_COLIBRI_PXA300_SD_DETECT;
> +			GPIO13_COLIBRI_PXA300_SD_DETECT;
>  	else				/* PXA320 Colibri */
>  		colibri_mci_platform_data.gpio_card_detect =
>  			GPIO28_COLIBRI_PXA320_SD_DETECT;
> diff --git a/arch/arm/mach-pxa/colibri-pxa300.c
> b/arch/arm/mach-pxa/colibri-pxa300.c index fddb16d..66dd81c 100644
> --- a/arch/arm/mach-pxa/colibri-pxa300.c
> +++ b/arch/arm/mach-pxa/colibri-pxa300.c
> @@ -41,7 +41,7 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[]
> __initdata = { GPIO4_MMC1_DAT1,
>  	GPIO5_MMC1_DAT2,
>  	GPIO6_MMC1_DAT3,
> -	GPIO39_GPIO,	/* SD detect */
> +	GPIO13_GPIO,	/* GPIO13_COLIBRI_PXA300_SD_DETECT */
> 
>  	/* UHC */
>  	GPIO0_2_USBH_PEN,
> diff --git a/arch/arm/mach-pxa/include/mach/colibri.h
> b/arch/arm/mach-pxa/include/mach/colibri.h index 388a96f..cb4236e 100644
> --- a/arch/arm/mach-pxa/include/mach/colibri.h
> +++ b/arch/arm/mach-pxa/include/mach/colibri.h
> @@ -60,7 +60,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
>  #define GPIO113_COLIBRI_PXA270_TS_IRQ	113
> 
>  /* GPIO definitions for Colibri PXA300/310 */
> -#define GPIO39_COLIBRI_PXA300_SD_DETECT	39
> +#define GPIO13_COLIBRI_PXA300_SD_DETECT	13
> 
>  /* GPIO definitions for Colibri PXA320 */
>  #define GPIO28_COLIBRI_PXA320_SD_DETECT	28