[PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
Vishwanath Sripathy
vishwanath.bs at ti.com
Thu Dec 23 10:28:26 EST 2010
Benoit,
> -----Original Message-----
> From: Cousson, Benoit [mailto:b-cousson at ti.com]
> Sent: Thursday, December 23, 2010 5:37 PM
> To: Gopinath, Thara
> Cc: linux-omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> khilman at deeprootsystems.com; paul at pwsan.com; Sripathy,
> Vishwanath; Sawant, Anand; Menon, Nishanth
> Subject: Re: [PATCH v5 4/5] OMAP4: hwmod: Add inital data for
> smartreflex modules.
>
> Hi Thara,
>
> On 12/20/2010 6:00 PM, Gopinath, Thara wrote:
> > From: Benoit Cousson<b-cousson at ti.com>
> >
> > This patch adds the hwmod details for OMAP4 smartreflex modules.
> >
> > Signed-off-by: Benoit Cousson<b-cousson at ti.com>
>
> You're s-o-b is missing, along with the changed you did to the patch.
>
> > ---
> > arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 168
> ++++++++++++++++++++++++++++
> > 1 files changed, 168 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> > index 7367648..0a6e674 100644
> > --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> > +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> > @@ -1740,6 +1740,169 @@ static struct omap_hwmod
> omap44xx_wd_timer3_hwmod = {
> > .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
> > };
> >
> > +/*
> > + * 'smartreflex' class
> > + * smartreflex module (monitor silicon performance and outputs a
> measure of
> > + * performance error)
> > + */
> > +
> > +/* The IP is not compliant to type1 / type2 scheme */
> > +static struct omap_hwmod_sysc_fields
> omap_hwmod_sysc_type_smartreflex = {
> > + .sidle_shift = 24,
> > + .enwkup_shift = 26,
> > +};
> > +
> > +static struct omap_hwmod_class_sysconfig
> omap44xx_smartreflex_sysc = {
> > + .sysc_offs = 0x0038,
> > + .sysc_flags = (SYSC_HAS_ENAWAKEUP |
> SYSC_HAS_SIDLEMODE),
> > + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
>
> The newly added SIDLE_SMART_WKUP flag is missing.
>
> > + .sysc_fields =&omap_hwmod_sysc_type_smartreflex,
> > +};
> > +
> > +static struct omap_hwmod_class
> omap44xx_smartreflex_hwmod_class = {
> > + .name = "smartreflex",
> > + .sysc =&omap44xx_smartreflex_sysc,
> > + .rev = 2,
> > +};
> > +
> > +/* smartreflex_core */
> > +static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
> > +static struct omap_hwmod_irq_info
> omap44xx_smartreflex_core_irqs[] = {
> > + { .irq = 19 + OMAP44XX_IRQ_GIC_START },
> > +};
> > +
> > +static struct omap_hwmod_addr_space
> omap44xx_smartreflex_core_addrs[] = {
> > + {
> > + .pa_start = 0x4a0dd000,
> > + .pa_end = 0x4a0dd03f,
> > + .flags = ADDR_TYPE_RT
> > + },
> > +};
> > +
> > +/* l4_cfg -> smartreflex_core */
> > +static struct omap_hwmod_ocp_if
> omap44xx_l4_cfg__smartreflex_core = {
> > + .master =&omap44xx_l4_cfg_hwmod,
> > + .slave =&omap44xx_smartreflex_core_hwmod,
> > + .clk = "l4_div_ck",
> > + .addr = omap44xx_smartreflex_core_addrs,
> > + .addr_cnt =
> ARRAY_SIZE(omap44xx_smartreflex_core_addrs),
> > + .user = OCP_USER_MPU | OCP_USER_SDMA,
> > +};
> > +
> > +/* smartreflex_core slave ports */
> > +static struct omap_hwmod_ocp_if
> *omap44xx_smartreflex_core_slaves[] = {
> > + &omap44xx_l4_cfg__smartreflex_core,
> > +};
> > +
> > +static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
> > + .name = "smartreflex_core",
> > + .class =&omap44xx_smartreflex_hwmod_class,
> > + .mpu_irqs = omap44xx_smartreflex_core_irqs,
> > + .mpu_irqs_cnt =
> ARRAY_SIZE(omap44xx_smartreflex_core_irqs),
> > + .main_clk = "smartreflex_core_fck",
> > + .vdd_name = "core",
> > + .prcm = {
> > + .omap4 = {
> > + .clkctrl_reg =
> OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
> > + },
> > + },
> > + .slaves = omap44xx_smartreflex_core_slaves,
> > + .slaves_cnt =
> ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
> > + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
> > +};
> > +
> > +/* smartreflex_iva */
> > +static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
> > +static struct omap_hwmod_irq_info
> omap44xx_smartreflex_iva_irqs[] = {
> > + { .irq = 102 + OMAP44XX_IRQ_GIC_START },
> > +};
> > +
> > +static struct omap_hwmod_addr_space
> omap44xx_smartreflex_iva_addrs[] = {
> > + {
> > + .pa_start = 0x4a0db000,
> > + .pa_end = 0x4a0db03f,
> > + .flags = ADDR_TYPE_RT
> > + },
> > +};
> > +
> > +/* l4_cfg -> smartreflex_iva */
> > +static struct omap_hwmod_ocp_if
> omap44xx_l4_cfg__smartreflex_iva = {
> > + .master =&omap44xx_l4_cfg_hwmod,
> > + .slave =&omap44xx_smartreflex_iva_hwmod,
> > + .clk = "l4_div_ck",
> > + .addr = omap44xx_smartreflex_iva_addrs,
> > + .addr_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_addrs),
> > + .user = OCP_USER_MPU | OCP_USER_SDMA,
> > +};
> > +
> > +/* smartreflex_iva slave ports */
> > +static struct omap_hwmod_ocp_if
> *omap44xx_smartreflex_iva_slaves[] = {
> > + &omap44xx_l4_cfg__smartreflex_iva,
> > +};
> > +
> > +static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
> > + .name = "smartreflex_iva",
> > + .class =&omap44xx_smartreflex_hwmod_class,
> > + .mpu_irqs = omap44xx_smartreflex_iva_irqs,
> > + .mpu_irqs_cnt =
> ARRAY_SIZE(omap44xx_smartreflex_iva_irqs),
> > + .main_clk = "smartreflex_iva_fck",
> > + .vdd_name = "iva",
> > + .prcm = {
> > + .omap4 = {
> > + .clkctrl_reg =
> OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
> > + },
> > + },
> > + .slaves = omap44xx_smartreflex_iva_slaves,
> > + .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
> > + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
> > +};
> > +
> > +/* smartreflex_mpu */
> > +static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
> > +static struct omap_hwmod_irq_info
> omap44xx_smartreflex_mpu_irqs[] = {
> > + { .irq = 18 + OMAP44XX_IRQ_GIC_START },
> > +};
> > +
> > +static struct omap_hwmod_addr_space
> omap44xx_smartreflex_mpu_addrs[] = {
> > + {
> > + .pa_start = 0x4a0d9000,
> > + .pa_end = 0x4a0d903f,
> > + .flags = ADDR_TYPE_RT
> > + },
> > +};
> > +
> > +/* l4_cfg -> smartreflex_mpu */
> > +static struct omap_hwmod_ocp_if
> omap44xx_l4_cfg__smartreflex_mpu = {
> > + .master =&omap44xx_l4_cfg_hwmod,
> > + .slave =&omap44xx_smartreflex_mpu_hwmod,
> > + .clk = "l4_div_ck",
> > + .addr = omap44xx_smartreflex_mpu_addrs,
> > + .addr_cnt =
> ARRAY_SIZE(omap44xx_smartreflex_mpu_addrs),
> > + .user = OCP_USER_MPU | OCP_USER_SDMA,
> > +};
> > +
> > +/* smartreflex_mpu slave ports */
> > +static struct omap_hwmod_ocp_if
> *omap44xx_smartreflex_mpu_slaves[] = {
> > + &omap44xx_l4_cfg__smartreflex_mpu,
> > +};
> > +
> > +static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
> > + .name = "smartreflex_mpu",
> > + .class =&omap44xx_smartreflex_hwmod_class,
> > + .mpu_irqs = omap44xx_smartreflex_mpu_irqs,
> > + .mpu_irqs_cnt =
> ARRAY_SIZE(omap44xx_smartreflex_mpu_irqs),
> > + .main_clk = "smartreflex_mpu_fck",
> > + .vdd_name = "mpu",
> > + .prcm = {
> > + .omap4 = {
> > + .clkctrl_reg =
> OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
> > + },
> > + },
> > + .slaves = omap44xx_smartreflex_mpu_slaves,
> > + .slaves_cnt =
> ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
> > + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
> > +};
> > +
> > static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
> > /* dmm class */
> > &omap44xx_dmm_hwmod,
> > @@ -1798,6 +1961,11 @@ static __initdata struct omap_hwmod
> *omap44xx_hwmods[] = {
> > &omap44xx_wd_timer2_hwmod,
> > &omap44xx_wd_timer3_hwmod,
> >
> > + /* smartreflex class */
> > + &omap44xx_smartreflex_core_hwmod,
> > + &omap44xx_smartreflex_iva_hwmod,
> > + &omap44xx_smartreflex_mpu_hwmod,
> > +
>
> The alphabetical order is not respected. Smartreflex should be before
> wd_timer.
>
> Since Tony already pull that from Kevin's tree, I'll send a patch to
Tony
> to fix these issues.
>
> Please note the following log when enabling SR in Class 3 on an
> OMAP4430/sdp:
>
> [ 2.362182] omap2_set_init_voltage: unable to find boot up OPP for
> vdd_mpu
> [ 2.369384] omap2_set_init_voltage: Unable to put vdd_mpu to its init
> voltage
> [ 2.369384]
> [ 2.378875] omap2_set_init_voltage: unable to find boot up OPP for
> vdd_iva
> [ 2.386108] omap2_set_init_voltage: Unable to put vdd_iva to its init
> voltage
> [ 2.386108]
> [ 2.396484] Power Management for TI OMAP4.
> [ 2.401031] sr_init: No PMIC hook to init smartreflex
> [ 2.406494] smartreflex smartreflex.0: omap_sr_probe: SmartReflex
> driver initialized
> [ 2.414825] smartreflex smartreflex.1: omap_sr_probe: SmartReflex
> driver initialized
> [ 2.423187] smartreflex smartreflex.2: omap_sr_probe: SmartReflex
> driver initialized
> [ 2.431732] SmartReflex Class3 initialized
>
> Is it expected?
> Why do we have that blank line in-between?
I think turbo OPPs are disabled by default in OPP table where as uboot is
setting mpu and iva to turbo OPP. That's why you are getting this error.
You should not get this error if you enable turbo opps in opp table.
Regarding blank line, it's because of this print (note \n\n)
printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
Vishwa
>
> Regards,
> Benoit
>
>
More information about the linux-arm-kernel
mailing list