[PATCH] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines

[Daniel Morsing]

The display reset lines are connected to a TPS65930 which may sleep
when changing GPIO values. Use the appropriate function to silence
a nasty warning from gpiolib.

Signed-off-by: Daniel Morsing <daniel.morsing at gmail.com>
---
 arch/arm/mach-omap2/board-devkit8000.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/board-devkit8000.c
b/arch/arm/mach-omap2/board-devkit8000.c
index 53ac762..f1f58f5 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -118,27 +118,27 @@ static int devkit8000_panel_enable_lcd(struct
omap_dss_device *dssdev)
 	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);

 	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 1);
+		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
 	return 0;
 }

 static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
 	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 0);
+		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
 }

 static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
 {
 	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 1);
+		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
 	return 0;
 }

 static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 {
 	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 0);
+		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
 }

 static struct regulator_consumer_supply devkit8000_vmmc1_supply =
-- 
1.7.3.3