[PATCH] ARM: mmp: added 5V Regulator enable for Brownstone

[Mark F. Brown]

5V supply for USB ports, LCD connector, and HDMI

Signed-off-by: Mark F. Brown <mark.brown314 at gmail.com>
---
 arch/arm/mach-mmp/brownstone.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 635c400..9d37b35 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -97,8 +97,13 @@ static unsigned long brownstone_pin_config[] __initdata = {
 	GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
 	GPIO112_MMC3_CMD | MFP_PULL_HIGH,
 	GPIO151_MMC3_CLK,
+
+	/* 5V Regulator */
+	GPIO89_GPIO89,
 };
 
+#define GPIO_5V_ENABLE	(89)
+
 static struct regulator_consumer_supply max8649_supply[] = {
 	REGULATOR_SUPPLY("vcc_core", NULL),
 };
@@ -145,10 +150,25 @@ static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
 	.max_speed	= 25000000,
 };
 
+/* enable for MAX8815A regulator (5V_ENABLE) */
+static void brownstone_enable_5v_regulator(void)
+{
+	int ret;
+	ret = gpio_request(GPIO_5V_ENABLE, "5V_ENABLE");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_5V_ENABLE\n");
+	else
+		gpio_direction_output(GPIO_5V_ENABLE, 1);
+	gpio_free(GPIO_5V_ENABLE);
+}
+
 static void __init brownstone_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
 
+	/* enable 5v regulator */
+	brownstone_enable_5v_regulator();
+
 	/* on-chip devices */
 	mmp2_add_uart(1);
 	mmp2_add_uart(3);
-- 
1.7.0.4