[PATCH 7/7] OMAP3: ASM sleep code format rework
jean.pihet at newoldbits.com
jean.pihet at newoldbits.com
Thu Dec 16 12:50:58 EST 2010
From: Jean Pihet <j-pihet at ti.com>
Cosmetic fixes to the code:
- white spaces and tabs,
- alignement,
- comments rephrase and typos,
- multi-line comments
Tested on N900 and Beagleboard with full RET and OFF modes,
using cpuidle and suspend.
Signed-off-by: Jean Pihet <j-pihet at ti.com>
---
arch/arm/mach-omap2/sleep34xx.S | 221 +++++++++++++++++++++------------------
1 files changed, 118 insertions(+), 103 deletions(-)
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 207f6e9..9c1c57e 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -1,6 +1,10 @@
/*
* linux/arch/arm/mach-omap2/sleep.S
*
+ * (C) Copyright 2010
+ * Texas Instruments
+ * Jean Pihet <j-pihet at ti.com>
+ *
* (C) Copyright 2007
* Texas Instruments
* Karthik Dasu <karthik-dp at ti.com>
@@ -78,20 +82,20 @@
.text
/* Function call to get the restore pointer for resume from OFF */
ENTRY(get_restore_pointer)
- stmfd sp!, {lr} @ save registers on stack
+ stmfd sp!, {lr} @ save registers on stack
adr r0, restore
- ldmfd sp!, {pc} @ restore regs and return
+ ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_restore_pointer_sz)
- .word . - get_restore_pointer
+ .word . - get_restore_pointer
.text
/* Function call to get the restore pointer for 3630 resume from OFF */
ENTRY(get_omap3630_restore_pointer)
- stmfd sp!, {lr} @ save registers on stack
+ stmfd sp!, {lr} @ save registers on stack
adr r0, restore_3630
- ldmfd sp!, {pc} @ restore regs and return
+ ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_omap3630_restore_pointer_sz)
- .word . - get_omap3630_restore_pointer
+ .word . - get_omap3630_restore_pointer
.text
/* Function call to get the restore pointer for ES3 to resume from OFF */
@@ -109,16 +113,16 @@ ENTRY(get_es3_restore_pointer_sz)
* place on 3630. Hopefully some version in the future maynot need this.
*/
ENTRY(enable_omap3630_toggle_l2_on_restore)
- stmfd sp!, {lr} @ save registers on stack
+ stmfd sp!, {lr} @ save registers on stack
/* Setup so that we will disable and enable l2 */
mov r1, #0x1
str r1, l2dis_3630
- ldmfd sp!, {pc} @ restore regs and return
+ ldmfd sp!, {pc} @ restore regs and return
+ .text
/* Function to call rom code to save secure ram context */
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
-
adr r3, api_params @ r3 points to parameters
str r0, [r3,#0x4] @ r0 has sdram address
ldr r12, high_mask
@@ -147,6 +151,7 @@ api_params:
ENTRY(save_secure_ram_context_sz)
.word . - save_secure_ram_context
+
/*
* ======================
* == Idle entry point ==
@@ -160,13 +165,14 @@ ENTRY(save_secure_ram_context_sz)
* and executes the WFI instruction
*
* Notes:
- * - this code gets copied to internal SRAM at boot.
+ * - this code gets copied to internal SRAM at boot and after wake-up
+ * from OFF mode
* - when the OMAP wakes up it continues at different execution points
* depending on the low power mode (non-OFF vs OFF modes),
* cf. 'Resume path for xxx mode' comments.
*/
ENTRY(omap34xx_cpu_suspend)
- stmfd sp!, {r0-r12, lr} @ save registers on stack
+ stmfd sp!, {r0-r12, lr} @ save registers on stack
/*
* r0 contains restore pointer in sdram
@@ -271,9 +277,9 @@ clean_l2:
* - should be faster and will change with kernel
* - 'might' have to copy address, load and jump to it
*/
- ldr r1, kernel_flush
- mov lr, pc
- bx r1
+ ldr r1, kernel_flush
+ mov lr, pc
+ bx r1
omap3_do_wfi:
ldr r4, sdrc_power @ read the SDRC_POWER register
@@ -366,18 +372,18 @@ restore_3630:
/* Fall thru to common code for the remaining logic */
restore:
- /*
+ /*
* Check what was the reason for mpu reset and store the reason in r9:
* 0 - No context lost
- * 1 - Only L1 and logic lost
- * 2 - Only L2 lost - In this case, we wont be here
- * 3 - Both L1 and L2 lost
+ * 1 - Only L1 and logic lost
+ * 2 - Only L2 lost - In this case, we wont be here
+ * 3 - Both L1 and L2 lost
*/
- ldr r1, pm_pwstctrl_mpu
+ ldr r1, pm_pwstctrl_mpu
ldr r2, [r1]
- and r2, r2, #0x3
- cmp r2, #0x0 @ Check if target power state was OFF or RET
- moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if target power state was OFF or RET
+ moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
bne logic_l1_restore
@@ -393,71 +399,74 @@ skipl2dis:
and r1, #0x700
cmp r1, #0x300
beq l2_inv_gp
- mov r0, #40 @ set service ID for PPA
- mov r12, r0 @ copy secure Service ID in r12
- mov r1, #0 @ set task id for ROM code in r1
- mov r2, #4 @ set some flags in r2, r6
+ mov r0, #40 @ set service ID for PPA
+ mov r12, r0 @ copy secure Service ID in r12
+ mov r1, #0 @ set task id for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
adr r3, l2_inv_api_params @ r3 points to dummy parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
/* Write to Aux control register to set some bits */
- mov r0, #42 @ set service ID for PPA
- mov r12, r0 @ copy secure Service ID in r12
- mov r1, #0 @ set task id for ROM code in r1
- mov r2, #4 @ set some flags in r2, r6
+ mov r0, #42 @ set service ID for PPA
+ mov r12, r0 @ copy secure Service ID in r12
+ mov r1, #0 @ set task id for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
ldr r4, scratchpad_base
- ldr r3, [r4, #0xBC] @ r3 points to parameters
+ ldr r3, [r4, #0xBC] @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
/* Restore L2 aux control register */
- @ set service ID for PPA
+ @ set service ID for PPA
mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
- mov r12, r0 @ copy service ID in r12
- mov r1, #0 @ set task ID for ROM code in r1
- mov r2, #4 @ set some flags in r2, r6
+ mov r12, r0 @ copy service ID in r12
+ mov r1, #0 @ set task ID for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
mov r6, #0xff
ldr r4, scratchpad_base
ldr r3, [r4, #0xBC]
- adds r3, r3, #8 @ r3 points to parameters
+ adds r3, r3, #8 @ r3 points to parameters
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
#endif
b logic_l1_restore
+
l2_inv_api_params:
- .word 0x1, 0x00
+ .word 0x1, 0x00
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
- mov r12, #0x1 @ set up to invalide L2
-smi: .word 0xE1600070 @ Call SMI monitor (smieq)
+ mov r12, #0x1 @ set up to invalidate L2
+ .word 0xE1600070 @ Call SMI monitor (smieq)
/* Write to Aux control register to set some bits */
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#4]
mov r12, #0x3
- .word 0xE1600070 @ Call SMI monitor (smieq)
+ .word 0xE1600070 @ Call SMI monitor (smieq)
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
ldr r0, [r3,#12]
mov r12, #0x2
- .word 0xE1600070 @ Call SMI monitor (smieq)
+ .word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
ldr r1, l2dis_3630
- cmp r1, #0x1 @ Do we need to re-enable L2 on 3630?
+ cmp r1, #0x1 @ Test if L2 re-enable needed on 3630
bne skipl2reen
mrc p15, 0, r1, c1, c0, 1
- orr r1, r1, #2 @ re-enable L2 cache
+ orr r1, r1, #2 @ re-enable L2 cache
mcr p15, 0, r1, c1, c0, 1
skipl2reen:
mov r1, #0
- /* Invalidate all instruction caches to PoU
- * and flush branch target cache */
+ /*
+ * Invalidate all instruction caches to PoU
+ * and flush branch target cache
+ */
mcr p15, 0, r1, c7, c5, 0
ldr r4, scratchpad_base
@@ -478,33 +487,33 @@ skipl2reen:
MCR p15, 0, r6, c2, c0, 1
/* Translation table base control register */
MCR p15, 0, r7, c2, c0, 2
- /*domain access Control Register */
+ /* Domain access Control Register */
MCR p15, 0, r8, c3, c0, 0
- /* data fault status Register */
+ /* Data fault status Register */
MCR p15, 0, r9, c5, c0, 0
- ldmia r3!,{r4-r8}
- /* instruction fault status Register */
+ ldmia r3!,{r4-r8}
+ /* Instruction fault status Register */
MCR p15, 0, r4, c5, c0, 1
- /*Data Auxiliary Fault Status Register */
+ /* Data Auxiliary Fault Status Register */
MCR p15, 0, r5, c5, c1, 0
- /*Instruction Auxiliary Fault Status Register*/
+ /* Instruction Auxiliary Fault Status Register*/
MCR p15, 0, r6, c5, c1, 1
- /*Data Fault Address Register */
+ /* Data Fault Address Register */
MCR p15, 0, r7, c6, c0, 0
- /*Instruction Fault Address Register*/
+ /* Instruction Fault Address Register*/
MCR p15, 0, r8, c6, c0, 2
- ldmia r3!,{r4-r7}
+ ldmia r3!,{r4-r7}
- /* user r/w thread and process ID */
+ /* User r/w thread and process ID */
MCR p15, 0, r4, c13, c0, 2
- /* user ro thread and process ID */
+ /* User ro thread and process ID */
MCR p15, 0, r5, c13, c0, 3
- /*Privileged only thread and process ID */
+ /* Privileged only thread and process ID */
MCR p15, 0, r6, c13, c0, 4
- /* cache size selection */
+ /* Cache size selection */
MCR p15, 2, r7, c0, c0, 0
- ldmia r3!,{r4-r8}
+ ldmia r3!,{r4-r8}
/* Data TLB lockdown registers */
MCR p15, 0, r4, c10, c0, 0
/* Instruction TLB lockdown registers */
@@ -516,26 +525,27 @@ skipl2reen:
/* Context PID */
MCR p15, 0, r8, c13, c0, 1
- ldmia r3!,{r4-r5}
- /* primary memory remap register */
+ ldmia r3!,{r4-r5}
+ /* Primary memory remap register */
MCR p15, 0, r4, c10, c2, 0
- /*normal memory remap register */
+ /* Normal memory remap register */
MCR p15, 0, r5, c10, c2, 1
/* Restore cpsr */
- ldmia r3!,{r4} /*load CPSR from SDRAM*/
- msr cpsr, r4 /*store cpsr */
+ ldmia r3!,{r4} @ load CPSR from SDRAM
+ msr cpsr, r4 @ store cpsr
/* Enabling MMU here */
- mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
- /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+ mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl
+ /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
and r7, #0x7
cmp r7, #0x0
beq usettbr0
ttbr_error:
- /* More work needs to be done to support N[0:2] value other than 0
- * So looping here so that the error can be detected
- */
+ /*
+ * More work needs to be done to support N[0:2] value other than 0
+ * So looping here so that the error can be detected
+ */
b ttbr_error
usettbr0:
mrc p15, 0, r2, c2, c0, 0
@@ -543,21 +553,25 @@ usettbr0:
and r2, r5
mov r4, pc
ldr r5, table_index_mask
- and r4, r5 /* r4 = 31 to 20 bits of pc */
+ and r4, r5 @ r4 = 31 to 20 bits of pc
/* Extract the value to be written to table entry */
ldr r1, table_entry
- add r1, r1, r4 /* r1 has value to be written to table entry*/
+ /* r1 has the value to be written to table entry*/
+ add r1, r1, r4
/* Getting the address of table entry to modify */
lsr r4, #18
- add r2, r4 /* r2 has the location which needs to be modified */
+ /* r2 has the location which needs to be modified */
+ add r2, r4
/* Storing previous entry of location being modified */
ldr r5, scratchpad_base
ldr r4, [r2]
str r4, [r5, #0xC0]
/* Modify the table entry */
str r1, [r2]
- /* Storing address of entry being modified
- * - will be restored after enabling MMU */
+ /*
+ * Storing address of entry being modified
+ * - will be restored after enabling MMU
+ */
ldr r5, scratchpad_base
str r2, [r5, #0xC4]
@@ -566,7 +580,7 @@ usettbr0:
mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
- /* Restore control register but dont enable caches here*/
+ /* Restore control register but dont enable caches here */
/* Caches will be enabled after restoring MMU table entry */
ldmia r3!, {r4}
/* Store previous value of control register in scratchpad */
@@ -580,7 +594,7 @@ usettbr0:
* == Exit point from OFF mode ==
* ==============================
*/
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
/*
@@ -646,55 +660,56 @@ ENTRY(es3_sdrc_fix_sz)
/* Make sure SDRC accesses are ok */
wait_sdrc_ok:
-/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this. */
+/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
ldr r4, cm_idlest_ckgen
wait_dpll3_lock:
ldr r5, [r4]
tst r5, #1
beq wait_dpll3_lock
- ldr r4, cm_idlest1_core
+ ldr r4, cm_idlest1_core
wait_sdrc_ready:
- ldr r5, [r4]
- tst r5, #0x2
- bne wait_sdrc_ready
+ ldr r5, [r4]
+ tst r5, #0x2
+ bne wait_sdrc_ready
/* allow DLL powerdown upon hw idle req */
- ldr r4, sdrc_power
- ldr r5, [r4]
- bic r5, r5, #0x40
- str r5, [r4]
-is_dll_in_lock_mode:
+ ldr r4, sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
- /* Is dll in lock mode? */
- ldr r4, sdrc_dlla_ctrl
- ldr r5, [r4]
- tst r5, #0x4
- bxne lr
- /* wait till dll locks */
+is_dll_in_lock_mode:
+ /* Is dll in lock mode? */
+ ldr r4, sdrc_dlla_ctrl
+ ldr r5, [r4]
+ tst r5, #0x4
+ bxne lr @ Return if locked
+ /* wait till dll locks */
wait_dll_lock_timed:
ldr r4, wait_dll_lock_counter
add r4, r4, #1
str r4, wait_dll_lock_counter
ldr r4, sdrc_dlla_status
- mov r6, #8 /* Wait 20uS for lock */
+ /* Wait 20uS for lock */
+ mov r6, #8
wait_dll_lock:
subs r6, r6, #0x1
beq kick_dll
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x4
- bne wait_dll_lock
- bx lr
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x4
+ bne wait_dll_lock
+ bx lr @ Return when locked
/* disable/reenable DLL if not locked */
kick_dll:
ldr r4, sdrc_dlla_ctrl
ldr r5, [r4]
mov r6, r5
- bic r6, #(1<<3) /* disable dll */
+ bic r6, #(1<<3) @ disable dll
str r6, [r4]
dsb
- orr r6, r6, #(1<<3) /* enable dll */
+ orr r6, r6, #(1<<3) @ enable dll
str r6, [r4]
dsb
ldr r4, kick_counter
@@ -719,7 +734,7 @@ scratchpad_base:
sram_base:
.word SRAM_BASE_P + 0x8000
sdrc_power:
- .word SDRC_POWER_V
+ .word SDRC_POWER_V
ttbrbit_mask:
.word 0xFFFFC000
table_index_mask:
@@ -733,9 +748,9 @@ control_stat:
control_mem_rta:
.word CONTROL_MEM_RTA_CTRL
kernel_flush:
- .word v7_flush_dcache_all
+ .word v7_flush_dcache_all
l2dis_3630:
- .word 0
+ .word 0
/* these 2 words need to be at the end !!! */
kick_counter:
.word 0
--
1.7.1
More information about the linux-arm-kernel
mailing list