[PATCH V2] s3c-fb: Add support S5PV310 FIMD
Jonghun Han
jonghun.han at samsung.com
Thu Dec 9 01:37:15 EST 2010
Hi Paul,
Could you please let me know your opinion about following patch.
Maybe you missed it.
Thanks.
Best Regards,
Jonghun Han.
Kukjin Kim wrote:
>
> From: Jonghun Han <jonghun.han at samsung.com>
>
> This patch adds struct s3c_fb_driverdata s3c_fb_data_s5pv310 for S5PV310
> and S5PC210. The clk_type is added to distinguish clock type in it and
> lcd_clk is added in structure s3c_fb to calculate divider for lcd panel.
>
> Please refer to below diagrams about clocks of FIMD IP. FIMD driver needs
> two clocks for FIMD IP and LCD pixel clock. Actually, the LCD pixel clock
> can be selected from 1.clk 'lcd' and 2.SCLK_FIMD before S5PV310. But from
> S5PV310, the 2.SCLK_FIMD can be used only for source of LCD pixel clock.
>
> FIMD_CLK_TYPE0:
> ------------------------------------
> dsys bus
> ----------------+-------------------
> |
> |1.clk 'lcd'
> |
> | FIMD block
> +---+-----------+
> 4.mout_mpll |\ | | |
> --------|m| | +-+-+ +----+ |
> |u|-+ | | +-+core| |
> |x| | | | +----+ |
> |/ | | | |\ |
> | | +-|m| +---+ |
> | | |u|--+div| |
> +------+---|x| +---+ |
> 2.SCLK_FIMD | |/ | |
> | | |
> +----------+----+
> |
> inside of SoC |
> -----------------------+--------------------------
> outside of SoC |
> | 3.LCD pixel clock
> |
> +--------------+
> | LCD module |
> +--------------+
>
> FIMD_CLK_TYPE1:
> ------------------------------------
> dsys bus
> ----------------+-------------------
> |
> |1.clk 'fimd'
> |
> | FIMD block
> +---+-----------+
> 4.mout_mpll |\ | | |
> --------|m| | | +----+ |
> |u|-+ | +---+core| |
> |x| | | +----+ |
> |/ | | |
> | | +---+ |
> | | +--+div| |
> +------+-----+ +---+ |
> 2.SCLK_FIMD | | |
> | | |
> +----------+----+
> |
> inside of SoC |
> -----------------------+--------------------------
> outside of SoC |
> | 3.LCD pixel clock
> |
> +--------------+
> | LCD module |
> +--------------+
>
> Signed-off-by: Jonghun Han <jonghun.han at samsung.com>
> Signed-off-by: Sangbeom Kim <sbkim73 at samsung.com>
> Cc: Ben Dooks <ben-linux at fluff.org>
> Cc: InKi Dae <inki.dae at samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> ---
> Changes since v1:
> - Added description of commit.
> - Removed useless changes.
>
> Note: This patch is only for FIMD0 and FIMD1 will be implemented later.
> This patch made against on Linux 2.6.37-rc1.
>
> drivers/video/Kconfig | 2 +-
> drivers/video/s3c-fb.c | 127
> ++++++++++++++++++++++++++++++++++++++++++------
> 2 files changed, 113 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 27c1fb4..0cde163 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -1951,7 +1951,7 @@ config FB_TMIO_ACCELL
>
> config FB_S3C
> tristate "Samsung S3C framebuffer support"
> - depends on FB && S3C_DEV_FB
> + depends on FB && (S3C_DEV_FB || S5P_DEV_FIMD0)
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
> index f9aca9d..d786334 100644
> --- a/drivers/video/s3c-fb.c
> +++ b/drivers/video/s3c-fb.c
> @@ -65,6 +65,9 @@ struct s3c_fb;
> #define VIDOSD_C(win, variant) (OSD_BASE(win, variant) + 0x08)
> #define VIDOSD_D(win, variant) (OSD_BASE(win, variant) + 0x0C)
>
> +#define FIMD_CLK_TYPE0 0
> +#define FIMD_CLK_TYPE1 1
> +
> /**
> * struct s3c_fb_variant - fb variant information
> * @is_2443: Set if S3C2443/S3C2416 style hardware.
> @@ -97,6 +100,7 @@ struct s3c_fb_variant {
>
> unsigned int has_prtcon:1;
> unsigned int has_shadowcon:1;
> + unsigned int clk_type:1;
> };
>
> /**
> @@ -183,7 +187,8 @@ struct s3c_fb_vsync {
> * struct s3c_fb - overall hardware state of the hardware
> * @dev: The device that we bound to, for printing, etc.
> * @regs_res: The resource we claimed for the IO registers.
> - * @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
> + * @bus_clk: The clk (hclk) feeding FIMD IP core.
> + * @lcd_clk: The clk (sclk) feeding our interface and possibly pixclk.
> * @regs: The mapped hardware registers.
> * @variant: Variant information for this hardware.
> * @enabled: A bitmask of enabled hardware windows.
> @@ -197,6 +202,7 @@ struct s3c_fb {
> struct device *dev;
> struct resource *regs_res;
> struct clk *bus_clk;
> + struct clk *lcd_clk;
> void __iomem *regs;
> struct s3c_fb_variant variant;
>
> @@ -334,7 +340,7 @@ static int s3c_fb_check_var(struct fb_var_screeninfo
*var,
> */
> static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
> {
> - unsigned long clk = clk_get_rate(sfb->bus_clk);
> + unsigned long clk = clk_get_rate(sfb->lcd_clk);
> unsigned long long tmp;
> unsigned int result;
>
> @@ -517,7 +523,7 @@ static int s3c_fb_set_par(struct fb_info *info)
>
> data = VIDTCON2_LINEVAL(var->yres - 1) |
> VIDTCON2_HOZVAL(var->xres - 1);
> - writel(data, regs +sfb->variant.vidtcon + 8 );
> + writel(data, regs + sfb->variant.vidtcon + 8);
> }
>
> /* write the buffer address */
> @@ -1286,8 +1292,10 @@ static int __devinit s3c_fb_probe(struct
> platform_device *pdev)
> struct s3c_fb_platdata *pd;
> struct s3c_fb *sfb;
> struct resource *res;
> + struct clk *mout_mpll = NULL;
> int win;
> int ret = 0;
> + u32 rate = 134000000;
>
> fbdrv = (struct s3c_fb_driverdata *)platform_get_device_id(pdev)-
> >driver_data;
>
> @@ -1314,19 +1322,56 @@ static int __devinit s3c_fb_probe(struct
> platform_device *pdev)
> sfb->pdata = pd;
> sfb->variant = fbdrv->variant;
>
> - sfb->bus_clk = clk_get(dev, "lcd");
> - if (IS_ERR(sfb->bus_clk)) {
> - dev_err(dev, "failed to get bus clock\n");
> + switch (sfb->variant.clk_type) {
> + case FIMD_CLK_TYPE0:
> + sfb->bus_clk = clk_get(dev, "lcd");
> + if (IS_ERR(sfb->bus_clk)) {
> + dev_err(dev, "failed to get bus clock\n");
> + goto err_sfb;
> + }
> +
> + clk_enable(sfb->bus_clk);
> +
> + sfb->lcd_clk = sfb->bus_clk;
> + break;
> +
> + case FIMD_CLK_TYPE1:
> + sfb->bus_clk = clk_get(&pdev->dev, "fimd");
> + if (IS_ERR(sfb->bus_clk)) {
> + dev_err(&pdev->dev, "failed to get clock for
fimd\n");
> + goto err_sfb;
> + }
> + clk_enable(sfb->bus_clk);
> +
> + sfb->lcd_clk = clk_get(&pdev->dev, "sclk_fimd");
> + if (IS_ERR(sfb->lcd_clk)) {
> + dev_err(&pdev->dev, "failed to get sclk for
fimd\n");
> + goto err_bus_clk;
> + }
> +
> + mout_mpll = clk_get(&pdev->dev, "mout_mpll");
> + if (IS_ERR(mout_mpll)) {
> + dev_err(&pdev->dev, "failed to get mout_mpll\n");
> + goto err_lcd_clk;
> + }
> + clk_set_parent(sfb->lcd_clk, mout_mpll);
> + clk_put(mout_mpll);
> +
> + clk_set_rate(sfb->lcd_clk, rate);
> + clk_enable(sfb->lcd_clk);
> + dev_dbg(&pdev->dev, "set fimd sclk rate to %d\n", rate);
> + break;
> +
> + default:
> + dev_err(dev, "failed to enable clock for FIMD\n");
> goto err_sfb;
> }
>
> - clk_enable(sfb->bus_clk);
> -
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res) {
> dev_err(dev, "failed to find registers\n");
> ret = -ENOENT;
> - goto err_clk;
> + goto err_lcd_clk;
> }
>
> sfb->regs_res = request_mem_region(res->start, resource_size(res),
> @@ -1334,7 +1379,7 @@ static int __devinit s3c_fb_probe(struct
platform_device
> *pdev)
> if (!sfb->regs_res) {
> dev_err(dev, "failed to claim register region\n");
> ret = -ENOENT;
> - goto err_clk;
> + goto err_lcd_clk;
> }
>
> sfb->regs = ioremap(res->start, resource_size(res));
> @@ -1413,9 +1458,15 @@ err_req_region:
> release_resource(sfb->regs_res);
> kfree(sfb->regs_res);
>
> -err_clk:
> - clk_disable(sfb->bus_clk);
> - clk_put(sfb->bus_clk);
> +err_lcd_clk:
> + clk_disable(sfb->lcd_clk);
> + clk_put(sfb->lcd_clk);
> +
> +err_bus_clk:
> + if (sfb->variant.clk_type != FIMD_CLK_TYPE0) {
> + clk_disable(sfb->bus_clk);
> + clk_put(sfb->bus_clk);
> + }
>
> err_sfb:
> kfree(sfb);
> @@ -1442,8 +1493,20 @@ static int __devexit s3c_fb_remove(struct
> platform_device *pdev)
>
> iounmap(sfb->regs);
>
> - clk_disable(sfb->bus_clk);
> - clk_put(sfb->bus_clk);
> + switch (sfb->variant.clk_type) {
> + case FIMD_CLK_TYPE1:
> + clk_disable(sfb->lcd_clk);
> + clk_put(sfb->lcd_clk);
> + /* fall through to default case */
> + case FIMD_CLK_TYPE0:
> + clk_disable(sfb->bus_clk);
> + clk_put(sfb->bus_clk);
> + break;
> + default:
> + dev_err(sfb->dev, "invalid clock type(%d)\n",
> + sfb->variant.clk_type);
> + break;
> + }
>
> release_resource(sfb->regs_res);
> kfree(sfb->regs_res);
> @@ -1656,6 +1719,37 @@ static struct s3c_fb_driverdata s3c_fb_data_s5pv210
=
> {
> .win[4] = &s3c_fb_data_64xx_wins[4],
> };
>
> +static struct s3c_fb_driverdata s3c_fb_data_s5pv310 = {
> + .variant = {
> + .nr_windows = 5,
> + .vidtcon = VIDTCON0,
> + .wincon = WINCON(0),
> + .winmap = WINxMAP(0),
> + .keycon = WKEYCON,
> + .osd = VIDOSD_BASE,
> + .osd_stride = 16,
> + .buf_start = VIDW_BUF_START(0),
> + .buf_size = VIDW_BUF_SIZE(0),
> + .buf_end = VIDW_BUF_END(0),
> +
> + .palette = {
> + [0] = 0x2400,
> + [1] = 0x2800,
> + [2] = 0x2c00,
> + [3] = 0x3000,
> + [4] = 0x3400,
> + },
> +
> + .has_shadowcon = 1,
> + .clk_type = FIMD_CLK_TYPE1,
> + },
> + .win[0] = &s3c_fb_data_64xx_wins[0],
> + .win[1] = &s3c_fb_data_64xx_wins[1],
> + .win[2] = &s3c_fb_data_64xx_wins[2],
> + .win[3] = &s3c_fb_data_64xx_wins[3],
> + .win[4] = &s3c_fb_data_64xx_wins[4],
> +};
> +
> /* S3C2443/S3C2416 style hardware */
> static struct s3c_fb_driverdata s3c_fb_data_s3c2443 = {
> .variant = {
> @@ -1703,6 +1797,9 @@ static struct platform_device_id s3c_fb_driver_ids[]
= {
> .name = "s5pv210-fb",
> .driver_data = (unsigned long)&s3c_fb_data_s5pv210,
> }, {
> + .name = "s5pv310-fb",
> + .driver_data = (unsigned long)&s3c_fb_data_s5pv310,
> + }, {
> .name = "s3c2443-fb",
> .driver_data = (unsigned long)&s3c_fb_data_s3c2443,
> },
> --
> 1.6.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list