[PATCH 05/22] msm: clock-7x30: Add 7x30 local clock driver
Stephen Boyd
sboyd at codeaurora.org
Thu Dec 16 19:49:49 EST 2010
From: Saravana Kannan <skannan at codeaurora.org>
Support locally controllable clocks on the 7x30 target.
Signed-off-by: Saravana Kannan <skannan at codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
---
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/clock-7x30.c | 1550 ++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-msm/clock-7x30.h | 38 +-
arch/arm/mach-msm/clock.c | 13 +-
arch/arm/mach-msm/clock.h | 12 +
arch/arm/mach-msm/proc_comm.h | 1 +
6 files changed, 1599 insertions(+), 16 deletions(-)
create mode 100644 arch/arm/mach-msm/clock-7x30.c
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index dc8ef08..8588b57 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -2,6 +2,7 @@ obj-y += io.o idle.o timer.o
ifdef CONFIG_MSM_PROC_COMM
obj-$(CONFIG_DEBUG_FS) += clock-debug.o
endif
+obj-$(CONFIG_ARCH_MSM7X30) += clock-7x30.o
ifndef CONFIG_ARCH_MSM8X60
obj-y += acpuclock-arm11.o
obj-y += dma.o
diff --git a/arch/arm/mach-msm/clock-7x30.c b/arch/arm/mach-msm/clock-7x30.c
new file mode 100644
index 0000000..beca3a6
--- /dev/null
+++ b/arch/arm/mach-msm/clock-7x30.c
@@ -0,0 +1,1550 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+#include <mach/msm_iomap.h>
+#include <mach/clk.h>
+
+#include "clock.h"
+#include "clock-7x30.h"
+#include "clock-pcom.h"
+#include "proc_comm.h"
+
+#define REG_BASE(off) (MSM_CLK_CTL_BASE + off)
+#define REG(off) (MSM_CLK_CTL_SH2_BASE + off)
+#define MNCNTR_EN_MASK B(8)
+#define MNCNTR_RST_MASK B(7)
+#define MNCNTR_MODE_MASK BM(6, 5)
+#define MNCNTR_MODE BVAL(6, 5, 0x2) /* Dual-edge mode. */
+
+/* Shadow-region 2 (SH2) registers. */
+#define QUP_I2C_NS_REG REG(0x04F0)
+#define CAM_NS_REG REG(0x0374)
+#define CAM_VFE_NS_REG REG(0x0044)
+#define CLK_HALT_STATEA_REG REG(0x0108)
+#define CLK_HALT_STATEB_REG REG(0x010C)
+#define CLK_HALT_STATEC_REG REG(0x02D4)
+#define CSI_NS_REG REG(0x0174)
+#define EMDH_NS_REG REG(0x0050)
+#define GLBL_CLK_ENA_2_SC_REG REG(0x03C0)
+#define GLBL_CLK_ENA_SC_REG REG(0x03BC)
+#define GLBL_CLK_STATE_2_REG REG(0x037C)
+#define GLBL_CLK_STATE_REG REG(0x0004)
+#define GRP_2D_NS_REG REG(0x0034)
+#define GRP_NS_REG REG(0x0084)
+#define HDMI_NS_REG REG(0x0484)
+#define I2C_2_NS_REG REG(0x02D8)
+#define I2C_NS_REG REG(0x0068)
+#define JPEG_NS_REG REG(0x0164)
+#define LPA_CORE_CLK_MA0_REG REG(0x04F4)
+#define LPA_CORE_CLK_MA2_REG REG(0x04FC)
+#define LPA_NS_REG REG(0x02E8)
+#define MDC_NS_REG REG(0x007C)
+#define MDP_LCDC_NS_REG REG(0x0390)
+#define MDP_NS_REG REG(0x014C)
+#define MDP_VSYNC_REG REG(0x0460)
+#define MFC_NS_REG REG(0x0154)
+#define MI2S_CODEC_RX_DIV_REG REG(0x02EC)
+#define MI2S_CODEC_TX_DIV_REG REG(0x02F0)
+#define MI2S_DIV_REG REG(0x02E4)
+#define MI2S_NS_REG REG(0x02E0)
+#define MI2S_RX_NS_REG REG(0x0070)
+#define MI2S_TX_NS_REG REG(0x0078)
+#define MIDI_NS_REG REG(0x02D0)
+#define PLL_ENA_REG REG(0x0264)
+#define PMDH_NS_REG REG(0x008C)
+#define SDAC_NS_REG REG(0x009C)
+#define SDCn_NS_REG(n) REG(0x00A4+(0x8*((n)-1)))
+#define SPI_NS_REG REG(0x02C8)
+#define TSIF_NS_REG REG(0x00C4)
+#define TV_NS_REG REG(0x00CC)
+#define UART1DM_NS_REG REG(0x00D4)
+#define UART2DM_NS_REG REG(0x00DC)
+#define UART2_NS_REG REG(0x0464)
+#define UART_NS_REG REG(0x00E0)
+#define USBH2_NS_REG REG(0x046C)
+#define USBH3_NS_REG REG(0x0470)
+#define USBH_MD_REG REG(0x02BC)
+#define USBH_NS_REG REG(0x02C0)
+#define VPE_NS_REG REG(0x015C)
+
+/* Registers in the base (non-shadow) region. */
+#define PLL0_STATUS_BASE_REG REG_BASE(0x0318)
+#define PLL1_STATUS_BASE_REG REG_BASE(0x0334)
+#define PLL2_STATUS_BASE_REG REG_BASE(0x0350)
+#define PLL3_STATUS_BASE_REG REG_BASE(0x036C)
+#define PLL4_STATUS_BASE_REG REG_BASE(0x0254)
+#define PLL5_STATUS_BASE_REG REG_BASE(0x0258)
+#define PLL6_STATUS_BASE_REG REG_BASE(0x04EC)
+#define SH2_OWN_APPS1_BASE_REG REG_BASE(0x040C)
+#define SH2_OWN_APPS2_BASE_REG REG_BASE(0x0414)
+#define SH2_OWN_APPS3_BASE_REG REG_BASE(0x0444)
+#define SH2_OWN_GLBL_BASE_REG REG_BASE(0x0404)
+#define SH2_OWN_ROW1_BASE_REG REG_BASE(0x041C)
+#define SH2_OWN_ROW2_BASE_REG REG_BASE(0x0424)
+
+struct clk_freq_tbl {
+ uint32_t freq_hz;
+ uint32_t src;
+ uint32_t md_val;
+ uint32_t ns_val;
+ uint32_t mode;
+ unsigned msmc1;
+};
+
+struct clk_local {
+ uint32_t count;
+ uint32_t type;
+ void __iomem *md_reg;
+ void __iomem *ns_reg;
+ uint32_t freq_mask;
+ uint32_t br_en_mask;
+ uint32_t root_en_mask;
+ int parent;
+ uint32_t *children;
+ const struct clk_freq_tbl *freq_tbl;
+ const struct clk_freq_tbl *current_freq;
+ void __iomem *halt_reg;
+ uint32_t halt_mask;
+ uint32_t test_vector;
+};
+
+
+enum {
+ SRC_PLL0 = 4, /* Modem PLL */
+ SRC_PLL1 = 1, /* Global PLL */
+ SRC_PLL3 = 3, /* Multimedia/Peripheral PLL or Backup PLL1 */
+ SRC_PLL4 = 2, /* Display PLL */
+ SRC_LPXO = 6, /* Low power XO. */
+ SRC_TCXO = 0, /* Used for sources that always source from tcxo */
+ SRC_AXI = 100, /* Used for rates that sync to AXI */
+ SRC_NONE /* Used for sources that can't be turned on/off. */
+};
+
+static uint32_t src_pll_tbl[] = {
+ [SRC_PLL0] = PLL_0,
+ [SRC_PLL1] = PLL_1,
+ [SRC_PLL3] = PLL_3,
+ [SRC_PLL4] = PLL_4,
+};
+
+#define B(x) BIT(x)
+#define BM(msb, lsb) (((((uint32_t)-1) << (31-msb)) >> (31-msb+lsb)) << lsb)
+#define BVAL(msb, lsb, val) (((val) << lsb) & BM(msb, lsb))
+
+#define MD8(m, n) (BVAL(15, 8, m) | BVAL(7, 0, ~(n)))
+#define N8(msb, lsb, m, n) (BVAL(msb, lsb, ~(n-m)))
+#define MD16(m, n) (BVAL(31, 16, m) | BVAL(15, 0, ~(n)))
+#define N16(m, n) (BVAL(31, 16, ~(n-m)))
+#define SPDIV(s, d) (BVAL(4, 3, d-1) | BVAL(2, 0, s))
+#define SDIV(s, d) (BVAL(6, 3, d-1) | BVAL(2, 0, s))
+#define F_MASK_BASIC (BM(6, 3)|BM(2, 0))
+#define F_MASK_MND16 (BM(31, 16)|BM(4, 3)|BM(2, 0))
+#define F_MASK_MND8(m, l) (BM(m, l)|BM(4, 3)|BM(2, 0))
+
+#define F_RAW(f, s, m_v, n_v, mde, v) { \
+ .freq_hz = f, \
+ .src = s, \
+ .md_val = m_v, \
+ .ns_val = n_v, \
+ .mode = mde, \
+ .msmc1 = v \
+ }
+
+#define FREQ_END 0
+#define F_BASIC(f, s, div, v) F_RAW(f, s, 0, SDIV(s, div), 0, v)
+#define F_MND16(f, s, div, m, n, v) \
+ F_RAW(f, s, MD16(m, n), N16(m, n)|SPDIV(s, div), !!(n), v)
+#define F_MND8(f, nmsb, nlsb, s, div, m, n, v) \
+ F_RAW(f, s, MD8(m, n), N8(nmsb, nlsb, m, n)|SPDIV(s, div), !!(n), v)
+#define F_END F_RAW(FREQ_END, SRC_NONE, 0, 0, 0, MSMC1_END)
+
+static const struct clk_freq_tbl clk_tbl_csi[] = {
+ F_MND8(153600000, 24, 17, SRC_PLL1, 2, 2, 5, NOMINAL),
+ F_MND8(192000000, 24, 17, SRC_PLL1, 4, 0, 0, NOMINAL),
+ F_MND8(384000000, 24, 17, SRC_PLL1, 2, 0, 0, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_tcxo[] = {
+ F_RAW(19200000, SRC_TCXO, 0, 0, 0, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_axi[] = {
+ F_RAW(1, SRC_AXI, 0, 0, 0, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_uartdm[] = {
+ F_MND16( 3686400, SRC_PLL3, 3, 3, 200, NOMINAL),
+ F_MND16( 7372800, SRC_PLL3, 3, 3, 100, NOMINAL),
+ F_MND16(14745600, SRC_PLL3, 3, 3, 50, NOMINAL),
+ F_MND16(32000000, SRC_PLL3, 3, 25, 192, NOMINAL),
+ F_MND16(40000000, SRC_PLL3, 3, 125, 768, NOMINAL),
+ F_MND16(46400000, SRC_PLL3, 3, 145, 768, NOMINAL),
+ F_MND16(48000000, SRC_PLL3, 3, 25, 128, NOMINAL),
+ F_MND16(51200000, SRC_PLL3, 3, 5, 24, NOMINAL),
+ F_MND16(56000000, SRC_PLL3, 3, 175, 768, NOMINAL),
+ F_MND16(58982400, SRC_PLL3, 3, 6, 25, NOMINAL),
+ F_MND16(64000000, SRC_PLL1, 4, 1, 3, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_mdh[] = {
+ F_BASIC( 49150000, SRC_PLL3, 15, NOMINAL),
+ F_BASIC( 92160000, SRC_PLL3, 8, NOMINAL),
+ F_BASIC(122880000, SRC_PLL3, 6, NOMINAL),
+ F_BASIC(184320000, SRC_PLL3, 4, NOMINAL),
+ F_BASIC(245760000, SRC_PLL3, 3, NOMINAL),
+ F_BASIC(368640000, SRC_PLL3, 2, NOMINAL),
+ F_BASIC(384000000, SRC_PLL1, 2, NOMINAL),
+ F_BASIC(445500000, SRC_PLL4, 2, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_grp[] = {
+ F_BASIC( 24576000, SRC_LPXO, 1, NOMINAL),
+ F_BASIC( 46080000, SRC_PLL3, 16, NOMINAL),
+ F_BASIC( 49152000, SRC_PLL3, 15, NOMINAL),
+ F_BASIC( 52662875, SRC_PLL3, 14, NOMINAL),
+ F_BASIC( 56713846, SRC_PLL3, 13, NOMINAL),
+ F_BASIC( 61440000, SRC_PLL3, 12, NOMINAL),
+ F_BASIC( 67025454, SRC_PLL3, 11, NOMINAL),
+ F_BASIC( 73728000, SRC_PLL3, 10, NOMINAL),
+ F_BASIC( 81920000, SRC_PLL3, 9, NOMINAL),
+ F_BASIC( 92160000, SRC_PLL3, 8, NOMINAL),
+ F_BASIC(105325714, SRC_PLL3, 7, NOMINAL),
+ F_BASIC(122880000, SRC_PLL3, 6, NOMINAL),
+ F_BASIC(147456000, SRC_PLL3, 5, NOMINAL),
+ F_BASIC(184320000, SRC_PLL3, 4, NOMINAL),
+ F_BASIC(192000000, SRC_PLL1, 4, NOMINAL),
+ F_BASIC(245760000, SRC_PLL3, 3, HIGH),
+ /* Sync to AXI. Hence this "rate" is not fixed. */
+ F_RAW(1, SRC_AXI, 0, B(14), 0, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_sdc1_3[] = {
+ F_MND8( 144000, 19, 12, SRC_LPXO, 1, 1, 171, NOMINAL),
+ F_MND8( 400000, 19, 12, SRC_LPXO, 1, 2, 123, NOMINAL),
+ F_MND8(16027000, 19, 12, SRC_PLL3, 3, 14, 215, NOMINAL),
+ F_MND8(17000000, 19, 12, SRC_PLL3, 4, 19, 206, NOMINAL),
+ F_MND8(20480000, 19, 12, SRC_PLL3, 4, 23, 212, NOMINAL),
+ F_MND8(24576000, 19, 12, SRC_LPXO, 1, 0, 0, NOMINAL),
+ F_MND8(49152000, 19, 12, SRC_PLL3, 3, 1, 5, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_sdc2_4[] = {
+ F_MND8( 144000, 20, 13, SRC_LPXO, 1, 1, 171, NOMINAL),
+ F_MND8( 400000, 20, 13, SRC_LPXO, 1, 2, 123, NOMINAL),
+ F_MND8(16027000, 20, 13, SRC_PLL3, 3, 14, 215, NOMINAL),
+ F_MND8(17000000, 20, 13, SRC_PLL3, 4, 19, 206, NOMINAL),
+ F_MND8(20480000, 20, 13, SRC_PLL3, 4, 23, 212, NOMINAL),
+ F_MND8(24576000, 20, 13, SRC_LPXO, 1, 0, 0, NOMINAL),
+ F_MND8(49152000, 20, 13, SRC_PLL3, 3, 1, 5, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_mdp_core[] = {
+ F_BASIC( 46080000, SRC_PLL3, 16, NOMINAL),
+ F_BASIC( 49152000, SRC_PLL3, 15, NOMINAL),
+ F_BASIC( 52663000, SRC_PLL3, 14, NOMINAL),
+ F_BASIC( 92160000, SRC_PLL3, 8, NOMINAL),
+ F_BASIC(122880000, SRC_PLL3, 6, NOMINAL),
+ F_BASIC(147456000, SRC_PLL3, 5, NOMINAL),
+ F_BASIC(153600000, SRC_PLL1, 5, NOMINAL),
+ F_BASIC(192000000, SRC_PLL1, 4, HIGH),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_mdp_lcdc[] = {
+ F_MND16(24576000, SRC_LPXO, 1, 0, 0, NOMINAL),
+ F_MND16(30720000, SRC_PLL3, 4, 1, 6, NOMINAL),
+ F_MND16(32768000, SRC_PLL3, 3, 2, 15, NOMINAL),
+ F_MND16(40960000, SRC_PLL3, 2, 1, 9, NOMINAL),
+ F_MND16(73728000, SRC_PLL3, 2, 1, 5, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_mdp_vsync[] = {
+ F_RAW(24576000, SRC_LPXO, 0, 0, 0, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_mi2s_codec[] = {
+ F_MND16( 2048000, SRC_LPXO, 4, 1, 3, NOMINAL),
+ F_MND16(12288000, SRC_LPXO, 2, 0, 0, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_mi2s[] = {
+ F_MND16(12288000, SRC_LPXO, 2, 0, 0, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_midi[] = {
+ F_MND8(98304000, 19, 12, SRC_PLL3, 3, 2, 5, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_sdac[] = {
+ F_MND16( 256000, SRC_LPXO, 4, 1, 24, NOMINAL),
+ F_MND16( 352800, SRC_LPXO, 1, 147, 10240, NOMINAL),
+ F_MND16( 384000, SRC_LPXO, 4, 1, 16, NOMINAL),
+ F_MND16( 512000, SRC_LPXO, 4, 1, 12, NOMINAL),
+ F_MND16( 705600, SRC_LPXO, 1, 147, 5120, NOMINAL),
+ F_MND16( 768000, SRC_LPXO, 4, 1, 8, NOMINAL),
+ F_MND16(1024000, SRC_LPXO, 4, 1, 6, NOMINAL),
+ F_MND16(1411200, SRC_LPXO, 1, 147, 2560, NOMINAL),
+ F_MND16(1536000, SRC_LPXO, 4, 1, 4, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_tv[] = {
+ F_MND8(27000000, 23, 16, SRC_PLL4, 2, 2, 33, NOMINAL),
+ F_MND8(74250000, 23, 16, SRC_PLL4, 2, 1, 6, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_usb[] = {
+ F_MND8(60000000, 23, 16, SRC_PLL1, 2, 5, 32, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_vfe_jpeg[] = {
+ F_MND16( 36864000, SRC_PLL3, 4, 1, 5, NOMINAL),
+ F_MND16( 46080000, SRC_PLL3, 4, 1, 4, NOMINAL),
+ F_MND16( 61440000, SRC_PLL3, 4, 1, 3, NOMINAL),
+ F_MND16( 73728000, SRC_PLL3, 2, 1, 5, NOMINAL),
+ F_MND16( 81920000, SRC_PLL3, 3, 1, 3, NOMINAL),
+ F_MND16( 92160000, SRC_PLL3, 4, 1, 2, NOMINAL),
+ F_MND16( 98304000, SRC_PLL3, 3, 2, 5, NOMINAL),
+ F_MND16(105326000, SRC_PLL3, 2, 2, 7, NOMINAL),
+ F_MND16(122880000, SRC_PLL3, 2, 1, 3, NOMINAL),
+ F_MND16(147456000, SRC_PLL3, 2, 2, 5, NOMINAL),
+ F_MND16(153600000, SRC_PLL1, 2, 2, 5, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_cam[] = {
+ F_MND16( 6000000, SRC_PLL1, 4, 1, 32, NOMINAL),
+ F_MND16( 8000000, SRC_PLL1, 4, 1, 24, NOMINAL),
+ F_MND16(12000000, SRC_PLL1, 4, 1, 16, NOMINAL),
+ F_MND16(16000000, SRC_PLL1, 4, 1, 12, NOMINAL),
+ F_MND16(19200000, SRC_PLL1, 4, 1, 10, NOMINAL),
+ F_MND16(24000000, SRC_PLL1, 4, 1, 8, NOMINAL),
+ F_MND16(32000000, SRC_PLL1, 4, 1, 6, NOMINAL),
+ F_MND16(48000000, SRC_PLL1, 4, 1, 4, NOMINAL),
+ F_MND16(64000000, SRC_PLL1, 4, 1, 3, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_vpe[] = {
+ F_MND8( 24576000, 22, 15, SRC_LPXO, 1, 0, 0, NOMINAL),
+ F_MND8( 30720000, 22, 15, SRC_PLL3, 4, 1, 6, NOMINAL),
+ F_MND8( 61440000, 22, 15, SRC_PLL3, 4, 1, 3, NOMINAL),
+ F_MND8( 81920000, 22, 15, SRC_PLL3, 3, 1, 3, NOMINAL),
+ F_MND8(122880000, 22, 15, SRC_PLL3, 3, 1, 2, NOMINAL),
+ F_MND8(147456000, 22, 15, SRC_PLL3, 1, 1, 5, NOMINAL),
+ F_MND8(153600000, 22, 15, SRC_PLL1, 1, 1, 5, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_mfc[] = {
+ F_MND8( 24576000, 24, 17, SRC_LPXO, 1, 0, 0, NOMINAL),
+ F_MND8( 30720000, 24, 17, SRC_PLL3, 4, 1, 6, NOMINAL),
+ F_MND8( 61440000, 24, 17, SRC_PLL3, 4, 1, 3, NOMINAL),
+ F_MND8( 81920000, 24, 17, SRC_PLL3, 3, 1, 3, NOMINAL),
+ F_MND8(122880000, 24, 17, SRC_PLL3, 3, 1, 2, NOMINAL),
+ F_MND8(147456000, 24, 17, SRC_PLL3, 1, 1, 5, NOMINAL),
+ F_MND8(153600000, 24, 17, SRC_PLL1, 1, 1, 5, NOMINAL),
+ F_MND8(170667000, 24, 17, SRC_PLL1, 1, 2, 9, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_spi[] = {
+ F_MND8( 9963243, 19, 12, SRC_PLL3, 4, 7, 129, NOMINAL),
+ F_MND8(26331429, 19, 12, SRC_PLL3, 4, 34, 241, NOMINAL),
+ F_END,
+};
+
+static const struct clk_freq_tbl clk_tbl_lpa_codec[] = {
+ F_RAW(1, SRC_NONE, 0, 0, 0, MSMC1_END), /* src = MI2S_CODEC_RX */
+ F_RAW(2, SRC_NONE, 0, 1, 0, MSMC1_END), /* src = ECODEC_CIF */
+ F_RAW(3, SRC_NONE, 0, 2, 0, MSMC1_END), /* src = MI2S */
+ F_RAW(4, SRC_NONE, 0, 3, 0, MSMC1_END), /* src = SDAC */
+ F_END,
+};
+
+static struct clk_freq_tbl dummy_freq = F_END;
+
+#define MND 1 /* Integer predivider and fractional MN:D divider. */
+#define BASIC 2 /* Integer divider. */
+#define NORATE 3 /* Just on/off. */
+
+#define C(x) L_7X30_##x##_CLK
+
+#define CLK_LOCAL(id, t, md, ns, f_msk, br, root, tbl, \
+ par, chld_lst, h, hm, tv) \
+ [C(id)] = { \
+ .type = t, \
+ .md_reg = md, \
+ .ns_reg = ns, \
+ .freq_mask = f_msk, \
+ .br_en_mask = br, \
+ .root_en_mask = root, \
+ .parent = C(par), \
+ .children = chld_lst, \
+ .freq_tbl = tbl, \
+ .current_freq = &dummy_freq, \
+ .halt_reg = h, \
+ .halt_mask = hm, \
+ .test_vector = tv, \
+ }
+
+#define CLK_BASIC(id, ns, br, root, tbl, par, h, hm, tv) \
+ CLK_LOCAL(id, BASIC, 0, ns, F_MASK_BASIC, br, root, tbl, \
+ par, NULL, h, hm, tv)
+#define CLK_MND8_P(id, ns, m, l, br, root, tbl, par, chld_lst, h, hm, tv) \
+ CLK_LOCAL(id, MND, (ns-4), ns, F_MASK_MND8(m, l), br, root, \
+ tbl, par, chld_lst, h, hm, tv)
+#define CLK_MND8(id, ns, m, l, br, root, tbl, chld_lst, h, hm, tv) \
+ CLK_MND8_P(id, ns, m, l, br, root, tbl, NONE, chld_lst, \
+ h, hm, tv)
+#define CLK_MND16(id, ns, br, root, tbl, par, chld_lst, h, hm, tv) \
+ CLK_LOCAL(id, MND, (ns-4), ns, F_MASK_MND16, br, root, tbl, \
+ par, chld_lst, h, hm, tv)
+#define CLK_1RATE(id, ns, br, root, tbl, h, hm, tv) \
+ CLK_LOCAL(id, BASIC, 0, ns, 0, br, root, tbl, NONE, NULL, \
+ h, hm, tv)
+#define CLK_SLAVE(id, ns, br, par, h, hm, tv) \
+ CLK_LOCAL(id, NORATE, 0, ns, 0, br, 0, NULL, par, NULL, \
+ h, hm, tv)
+#define CLK_NORATE(id, ns, br, root, h, hm, tv) \
+ CLK_LOCAL(id, NORATE, 0, ns, 0, br, root, NULL, NONE, NULL, \
+ h, hm, tv)
+#define CLK_GLBL(id, glbl, br, h, hm, tv) \
+ CLK_LOCAL(id, NORATE, 0, glbl, 0, br, 0, NULL, GLBL_ROOT, \
+ NULL, h, hm, tv)
+#define CLK_BRIDGE(id, glbl, br, par, h, hm, tv) \
+ CLK_LOCAL(id, NORATE, 0, glbl, 0, br, 0, NULL, par, NULL, \
+ h, hm, tv)
+
+static uint32_t *pll_status_addr[NUM_PLL] = {
+ [PLL_0] = PLL0_STATUS_BASE_REG,
+ [PLL_1] = PLL1_STATUS_BASE_REG,
+ [PLL_2] = PLL2_STATUS_BASE_REG,
+ [PLL_3] = PLL3_STATUS_BASE_REG,
+ [PLL_4] = PLL4_STATUS_BASE_REG,
+ [PLL_5] = PLL5_STATUS_BASE_REG,
+ [PLL_6] = PLL6_STATUS_BASE_REG,
+};
+
+static uint32_t pll_count[NUM_PLL];
+
+static uint32_t chld_grp_3d_src[] = {C(IMEM), C(GRP_3D), C(NONE)};
+static uint32_t chld_mdp_lcdc_p[] = {C(MDP_LCDC_PAD_PCLK), C(NONE)};
+static uint32_t chld_mfc[] = {C(MFC_DIV2), C(NONE)};
+static uint32_t chld_mi2s_codec_rx[] = {C(MI2S_CODEC_RX_S), C(NONE)};
+static uint32_t chld_mi2s_codec_tx[] = {C(MI2S_CODEC_TX_S), C(NONE)};
+static uint32_t chld_mi2s[] = {C(MI2S_S), C(NONE)};
+static uint32_t chld_sdac[] = {C(SDAC_M), C(NONE)};
+static uint32_t chld_tv[] = {C(TV_DAC), C(TV_ENC), C(TSIF_REF),
+ C(HDMI), C(NONE)};
+static uint32_t chld_usb_src[] = {C(USB_HS), C(USB_HS_CORE),
+ C(USB_HS2), C(USB_HS2_CORE),
+ C(USB_HS3), C(USB_HS3_CORE),
+ C(NONE)};
+static uint32_t chld_vfe[] = {C(VFE_MDC), C(VFE_CAMIF), C(CSI0_VFE),
+ C(NONE)};
+
+static struct clk_local clk_local_tbl[] = {
+ CLK_NORATE(MDC, MDC_NS_REG, B(9), B(11),
+ CLK_HALT_STATEA_REG, 10, 0x4D56),
+ CLK_NORATE(LPA_CORE, LPA_NS_REG, B(5), 0,
+ CLK_HALT_STATEC_REG, 5, 0x0E),
+
+ CLK_1RATE(I2C, I2C_NS_REG, B(9), B(11), clk_tbl_tcxo,
+ CLK_HALT_STATEA_REG, 15, 0x4D4D),
+ CLK_1RATE(I2C_2, I2C_2_NS_REG, B(0), B(2), clk_tbl_tcxo,
+ CLK_HALT_STATEC_REG, 2, 0x0B),
+ CLK_1RATE(QUP_I2C, QUP_I2C_NS_REG, B(0), B(2), clk_tbl_tcxo,
+ CLK_HALT_STATEB_REG, 31, 0x1C),
+ CLK_1RATE(UART1, UART_NS_REG, B(5), B(4), clk_tbl_tcxo,
+ CLK_HALT_STATEB_REG, 7, 0x4D6F),
+ CLK_1RATE(UART2, UART2_NS_REG, B(5), B(4), clk_tbl_tcxo,
+ CLK_HALT_STATEB_REG, 5, 0x4D71),
+
+ CLK_BASIC(EMDH, EMDH_NS_REG, 0, B(11), clk_tbl_mdh, AXI_LI_ADSP_A,
+ NULL, 0, 0x4F00),
+ CLK_BASIC(PMDH, PMDH_NS_REG, 0, B(11), clk_tbl_mdh, AXI_LI_ADSP_A,
+ NULL, 0, 0x5500),
+ CLK_BASIC(MDP, MDP_NS_REG, B(9), B(11), clk_tbl_mdp_core, AXI_MDP,
+ CLK_HALT_STATEB_REG, 16, 0x5400),
+
+ CLK_MND8_P(VPE, VPE_NS_REG, 22, 15, B(9), B(11), clk_tbl_vpe,
+ AXI_VPE, NULL, CLK_HALT_STATEC_REG, 10, 0x6C00),
+ CLK_MND8_P(MFC, MFC_NS_REG, 24, 17, B(9), B(11), clk_tbl_mfc,
+ AXI_MFC, chld_mfc, CLK_HALT_STATEC_REG,
+ 12, 0x38),
+ CLK_SLAVE(MFC_DIV2, MFC_NS_REG, B(15), MFC, CLK_HALT_STATEC_REG,
+ 11, 0x1F),
+
+ CLK_MND8(SDC1, SDCn_NS_REG(1), 19, 12, B(9), B(11), clk_tbl_sdc1_3,
+ NULL, CLK_HALT_STATEA_REG, 1, 0x4D62),
+ CLK_MND8(SDC2, SDCn_NS_REG(2), 20, 13, B(9), B(11), clk_tbl_sdc2_4,
+ NULL, CLK_HALT_STATEA_REG, 0, 0x4D64),
+ CLK_MND8(SDC3, SDCn_NS_REG(3), 19, 12, B(9), B(11), clk_tbl_sdc1_3,
+ NULL, CLK_HALT_STATEB_REG, 24, 0x4D7A),
+ CLK_MND8(SDC4, SDCn_NS_REG(4), 20, 13, B(9), B(11), clk_tbl_sdc2_4,
+ NULL, CLK_HALT_STATEB_REG, 25, 0x4D7C),
+ CLK_MND8(SPI, SPI_NS_REG, 19, 12, B(9), B(11), clk_tbl_spi, NULL,
+ CLK_HALT_STATEC_REG, 0, 0x09),
+ CLK_MND8(MIDI, MIDI_NS_REG, 19, 12, B(9), B(11), clk_tbl_midi, NULL,
+ CLK_HALT_STATEC_REG, 1, 0x0A),
+ CLK_MND8_P(USB_HS_SRC, USBH_NS_REG, 23, 16, 0, B(11), clk_tbl_usb,
+ AXI_LI_ADSP_A, chld_usb_src, NULL, 0, 0),
+ CLK_SLAVE(USB_HS, USBH_NS_REG, B(9), USB_HS_SRC,
+ CLK_HALT_STATEB_REG, 26, 0x4D7F),
+ CLK_SLAVE(USB_HS_CORE, USBH_NS_REG, B(13), USB_HS_SRC,
+ CLK_HALT_STATEA_REG, 27, 0x14),
+ CLK_SLAVE(USB_HS2, USBH2_NS_REG, B(9), USB_HS_SRC,
+ CLK_HALT_STATEB_REG, 3, 0x4D73),
+ CLK_SLAVE(USB_HS2_CORE, USBH2_NS_REG, B(4), USB_HS_SRC,
+ CLK_HALT_STATEA_REG, 28, 0x15),
+ CLK_SLAVE(USB_HS3, USBH3_NS_REG, B(9), USB_HS_SRC,
+ CLK_HALT_STATEB_REG, 2, 0x4D74),
+ CLK_SLAVE(USB_HS3_CORE, USBH3_NS_REG, B(4), USB_HS_SRC,
+ CLK_HALT_STATEA_REG, 29, 0x16),
+ CLK_MND8(TV, TV_NS_REG, 23, 16, 0, B(11), clk_tbl_tv, chld_tv,
+ NULL, 0, 0),
+ CLK_SLAVE(HDMI, HDMI_NS_REG, B(9), TV,
+ CLK_HALT_STATEC_REG, 7, 0x13),
+ CLK_SLAVE(TV_DAC, TV_NS_REG, B(12), TV,
+ CLK_HALT_STATEB_REG, 27, 0x4D6C),
+ CLK_SLAVE(TV_ENC, TV_NS_REG, B(9), TV,
+ CLK_HALT_STATEB_REG, 10, 0x4D6B),
+ /* Hacking root & branch into one param. */
+ CLK_SLAVE(TSIF_REF, TSIF_NS_REG, B(9)|B(11), TV,
+ CLK_HALT_STATEB_REG, 11, 0x4D6A),
+
+ CLK_MND16(UART1DM, UART1DM_NS_REG, B(9), B(11), clk_tbl_uartdm, NONE,
+ NULL, CLK_HALT_STATEB_REG, 6, 0x4D70),
+ CLK_MND16(UART2DM, UART2DM_NS_REG, B(9), B(11), clk_tbl_uartdm, NONE,
+ NULL, CLK_HALT_STATEB_REG, 23, 0x4D7D),
+ CLK_MND16(JPEG, JPEG_NS_REG, B(9), B(11), clk_tbl_vfe_jpeg, AXI_LI_JPEG,
+ NULL, CLK_HALT_STATEB_REG, 1, 0x6000),
+ CLK_MND16(CAM_M, CAM_NS_REG, 0, B(9), clk_tbl_cam, NONE, NULL,
+ NULL, 0, 0x4D44),
+ CLK_MND16(VFE, CAM_VFE_NS_REG, B(9), B(13), clk_tbl_vfe_jpeg,
+ AXI_LI_VFE, chld_vfe, CLK_HALT_STATEB_REG,
+ 0, 0x4D76),
+ CLK_SLAVE(VFE_MDC, CAM_VFE_NS_REG, B(11), VFE, CLK_HALT_STATEA_REG,
+ 9, 0x4D57),
+ CLK_SLAVE(VFE_CAMIF, CAM_VFE_NS_REG, B(15), VFE, CLK_HALT_STATEC_REG,
+ 13, 0x7000),
+ CLK_SLAVE(CSI0_VFE, CSI_NS_REG, B(15), VFE, CLK_HALT_STATEC_REG,
+ 16, 0),
+
+ CLK_MND16(SDAC, SDAC_NS_REG, B(9), B(11), clk_tbl_sdac,
+ NONE, chld_sdac, CLK_HALT_STATEA_REG, 2, 0x4D60),
+ CLK_SLAVE(SDAC_M, SDAC_NS_REG, B(12), SDAC, CLK_HALT_STATEB_REG,
+ 17, 0x4D66),
+
+ CLK_MND16(MDP_LCDC_PCLK, MDP_LCDC_NS_REG, B(9), B(11),
+ clk_tbl_mdp_lcdc, NONE, chld_mdp_lcdc_p,
+ CLK_HALT_STATEB_REG, 28, 0x4200),
+ CLK_SLAVE(MDP_LCDC_PAD_PCLK, MDP_LCDC_NS_REG, B(12), MDP_LCDC_PCLK,
+ CLK_HALT_STATEB_REG, 29, 0x4100),
+ CLK_1RATE(MDP_VSYNC, MDP_VSYNC_REG, B(0), 0, clk_tbl_mdp_vsync,
+ CLK_HALT_STATEB_REG, 30, 0x4D53),
+
+ CLK_MND16(MI2S_CODEC_RX_M, MI2S_RX_NS_REG, B(12), B(11),
+ clk_tbl_mi2s_codec, NONE, chld_mi2s_codec_rx,
+ CLK_HALT_STATEA_REG, 12, 0x4D4E),
+ CLK_SLAVE(MI2S_CODEC_RX_S, MI2S_RX_NS_REG, B(9), MI2S_CODEC_RX_M,
+ CLK_HALT_STATEA_REG, 13, 0x4D4F),
+
+ CLK_MND16(MI2S_CODEC_TX_M, MI2S_TX_NS_REG, B(12), B(11),
+ clk_tbl_mi2s_codec, NONE, chld_mi2s_codec_tx,
+ CLK_HALT_STATEC_REG, 8, 0x4D50),
+ CLK_SLAVE(MI2S_CODEC_TX_S, MI2S_TX_NS_REG, B(9), MI2S_CODEC_TX_M,
+ CLK_HALT_STATEA_REG, 11, 0x17),
+
+ CLK_MND16(MI2S_M, MI2S_NS_REG, B(12), B(11),
+ clk_tbl_mi2s, NONE, chld_mi2s, CLK_HALT_STATEC_REG,
+ 4, 0x0D),
+ CLK_SLAVE(MI2S_S, MI2S_NS_REG, B(9), MI2S_M, CLK_HALT_STATEC_REG,
+ 3, 0),
+
+ CLK_LOCAL(GRP_2D, BASIC, 0, GRP_2D_NS_REG, F_MASK_BASIC | (7 << 12),
+ B(7), B(11), clk_tbl_grp, AXI_GRP_2D, NULL,
+ CLK_HALT_STATEA_REG, 31, 0x5C00),
+ CLK_LOCAL(GRP_3D_SRC, BASIC, 0, GRP_NS_REG, F_MASK_BASIC | (7 << 12),
+ 0, B(11), clk_tbl_grp, AXI_LI_GRP, chld_grp_3d_src,
+ 0, 0, 0),
+ CLK_SLAVE(GRP_3D, GRP_NS_REG, B(7), GRP_3D_SRC, CLK_HALT_STATEB_REG,
+ 18, 0x5E00),
+ CLK_SLAVE(IMEM, GRP_NS_REG, B(9), GRP_3D_SRC, CLK_HALT_STATEB_REG,
+ 19, 0x5F00),
+ CLK_LOCAL(LPA_CODEC, BASIC, 0, LPA_NS_REG, BM(1, 0), B(9), 0,
+ clk_tbl_lpa_codec, NONE, NULL, CLK_HALT_STATEC_REG,
+ 6, 0x0F),
+
+ CLK_MND8(CSI0, CSI_NS_REG, 24, 17, B(9), B(11), clk_tbl_csi, NULL,
+ CLK_HALT_STATEC_REG, 17, 0x5F00),
+
+ /* For global clocks to be on we must have GLBL_ROOT_ENA set */
+ CLK_1RATE(GLBL_ROOT, GLBL_CLK_ENA_SC_REG, 0, B(29), clk_tbl_axi,
+ NULL, 0, 0),
+
+ /* Peripheral bus clocks. */
+ CLK_BRIDGE(ADM, GLBL_CLK_ENA_SC_REG, B(5), AXI_LI_APPS,
+ GLBL_CLK_STATE_REG, 5, 0x4000),
+ CLK_GLBL(ADM_P, GLBL_CLK_ENA_2_SC_REG, B(15),
+ GLBL_CLK_STATE_2_REG, 15, 0x11),
+ CLK_GLBL(CE, GLBL_CLK_ENA_SC_REG, B(6),
+ GLBL_CLK_STATE_REG, 6, 0x4D43),
+ CLK_GLBL(CAMIF_PAD_P, GLBL_CLK_ENA_SC_REG, B(9),
+ GLBL_CLK_STATE_REG, 9, 0x1A),
+ CLK_GLBL(CSI0_P, GLBL_CLK_ENA_SC_REG, B(30),
+ GLBL_CLK_STATE_REG, 30, 0),
+ CLK_GLBL(EMDH_P, GLBL_CLK_ENA_2_SC_REG, B(3),
+ GLBL_CLK_STATE_2_REG, 3, 0x03),
+ CLK_GLBL(GRP_2D_P, GLBL_CLK_ENA_SC_REG, B(24),
+ GLBL_CLK_STATE_REG, 24, 0x4D4C),
+ CLK_GLBL(GRP_3D_P, GLBL_CLK_ENA_2_SC_REG, B(17),
+ GLBL_CLK_STATE_2_REG, 17, 0x4D67),
+ CLK_GLBL(JPEG_P, GLBL_CLK_ENA_2_SC_REG, B(24),
+ GLBL_CLK_STATE_2_REG, 24, 0x4D5E),
+ CLK_GLBL(LPA_P, GLBL_CLK_ENA_2_SC_REG, B(7),
+ GLBL_CLK_STATE_2_REG, 7, 0x07),
+ CLK_GLBL(MDP_P, GLBL_CLK_ENA_2_SC_REG, B(6),
+ GLBL_CLK_STATE_2_REG, 6, 0x06),
+ CLK_GLBL(MFC_P, GLBL_CLK_ENA_2_SC_REG, B(26),
+ GLBL_CLK_STATE_2_REG, 26, 0x4D75),
+ CLK_GLBL(PMDH_P, GLBL_CLK_ENA_2_SC_REG, B(4),
+ GLBL_CLK_STATE_2_REG, 4, 0x04),
+ CLK_GLBL(ROTATOR_IMEM, GLBL_CLK_ENA_2_SC_REG, B(23),
+ GLBL_CLK_STATE_2_REG, 23, 0x6600),
+ CLK_GLBL(ROTATOR_P, GLBL_CLK_ENA_2_SC_REG, B(25),
+ GLBL_CLK_STATE_2_REG, 25, 0x4D6D),
+ CLK_GLBL(SDC1_P, GLBL_CLK_ENA_SC_REG, B(7),
+ GLBL_CLK_STATE_REG, 7, 0x4D61),
+ CLK_GLBL(SDC2_P, GLBL_CLK_ENA_SC_REG, B(8),
+ GLBL_CLK_STATE_REG, 8, 0x4F63),
+ CLK_GLBL(SDC3_P, GLBL_CLK_ENA_SC_REG, B(27),
+ GLBL_CLK_STATE_REG, 27, 0x4D79),
+ CLK_GLBL(SDC4_P, GLBL_CLK_ENA_SC_REG, B(28),
+ GLBL_CLK_STATE_REG, 28, 0x4D7B),
+ CLK_GLBL(SPI_P, GLBL_CLK_ENA_2_SC_REG, B(10),
+ GLBL_CLK_STATE_2_REG, 10, 0x18),
+ CLK_GLBL(TSIF_P, GLBL_CLK_ENA_SC_REG, B(18),
+ GLBL_CLK_STATE_REG, 18, 0x4D65),
+ CLK_GLBL(UART1DM_P, GLBL_CLK_ENA_SC_REG, B(17),
+ GLBL_CLK_STATE_REG, 17, 0x4D5C),
+ CLK_GLBL(UART2DM_P, GLBL_CLK_ENA_SC_REG, B(26),
+ GLBL_CLK_STATE_REG, 26, 0x4D7E),
+ CLK_GLBL(USB_HS2_P, GLBL_CLK_ENA_2_SC_REG, B(8),
+ GLBL_CLK_STATE_2_REG, 8, 0x08),
+ CLK_GLBL(USB_HS3_P, GLBL_CLK_ENA_2_SC_REG, B(9),
+ GLBL_CLK_STATE_2_REG, 9, 0x10),
+ CLK_GLBL(USB_HS_P, GLBL_CLK_ENA_SC_REG, B(25),
+ GLBL_CLK_STATE_REG, 25, 0x4D58),
+ CLK_GLBL(VFE_P, GLBL_CLK_ENA_2_SC_REG, B(27),
+ GLBL_CLK_STATE_2_REG, 27, 0x4D55),
+
+ /* AXI bridge clocks. */
+ CLK_BRIDGE(AXI_LI_APPS, GLBL_CLK_ENA_SC_REG, B(2), GLBL_ROOT,
+ GLBL_CLK_STATE_REG, 2, 0x4900),
+ CLK_BRIDGE(AXI_LI_ADSP_A, GLBL_CLK_ENA_2_SC_REG, B(14), AXI_LI_APPS,
+ GLBL_CLK_STATE_2_REG, 14, 0x6400),
+ CLK_BRIDGE(AXI_LI_JPEG, GLBL_CLK_ENA_2_SC_REG, B(19), AXI_LI_APPS,
+ GLBL_CLK_STATE_2_REG, 19, 0x4E00),
+ CLK_BRIDGE(AXI_LI_VFE, GLBL_CLK_ENA_SC_REG, B(23), AXI_LI_APPS,
+ GLBL_CLK_STATE_REG, 23, 0x5B00),
+ CLK_BRIDGE(AXI_MDP, GLBL_CLK_ENA_2_SC_REG, B(29), AXI_LI_APPS,
+ GLBL_CLK_STATE_2_REG, 29, 0x6B00),
+
+ CLK_BRIDGE(AXI_IMEM, GLBL_CLK_ENA_2_SC_REG, B(18), GLBL_ROOT,
+ GLBL_CLK_STATE_2_REG, 18, 0x4B00),
+
+ CLK_BRIDGE(AXI_LI_VG, GLBL_CLK_ENA_SC_REG, B(3), GLBL_ROOT,
+ GLBL_CLK_STATE_REG, 3, 0x4700),
+ CLK_BRIDGE(AXI_GRP_2D, GLBL_CLK_ENA_SC_REG, B(21), AXI_LI_VG,
+ GLBL_CLK_STATE_REG, 21, 0x5900),
+ CLK_BRIDGE(AXI_LI_GRP, GLBL_CLK_ENA_SC_REG, B(22), AXI_LI_VG,
+ GLBL_CLK_STATE_REG, 22, 0x5A00),
+ CLK_BRIDGE(AXI_MFC, GLBL_CLK_ENA_2_SC_REG, B(20), AXI_LI_VG,
+ GLBL_CLK_STATE_2_REG, 20, 0x6A00),
+ CLK_BRIDGE(AXI_ROTATOR, GLBL_CLK_ENA_2_SC_REG, B(22), AXI_LI_VG,
+ GLBL_CLK_STATE_2_REG, 22, 0x4300),
+ CLK_BRIDGE(AXI_VPE, GLBL_CLK_ENA_2_SC_REG, B(21), AXI_LI_VG,
+ GLBL_CLK_STATE_2_REG, 21, 0x6700),
+};
+
+static DEFINE_SPINLOCK(clock_reg_lock);
+static DEFINE_SPINLOCK(pll_vote_lock);
+
+enum {
+ TCXO,
+ LPXO,
+ NUM_XO
+};
+static unsigned xo_votes[NUM_XO]; /* Tracks the number of users for each XO */
+
+/* Map PLLs to which XO they use */
+static const unsigned pll_to_xo[] = {
+ [PLL_0] = TCXO,
+ [PLL_1] = TCXO,
+ [PLL_2] = TCXO,
+ [PLL_3] = LPXO,
+ [PLL_4] = LPXO,
+ [PLL_5] = TCXO,
+ [PLL_6] = TCXO,
+};
+
+static void vote_for_xo(unsigned xo)
+{
+ BUG_ON(xo >= NUM_XO);
+
+ if (!xo_votes[xo]) {
+ int enable = 1;
+ unsigned p_xo = xo;
+ msm_proc_comm(PCOM_CLKCTL_RPC_SRC_REQUEST, &p_xo, &enable);
+ }
+ xo_votes[xo]++;
+}
+
+static void unvote_for_xo(unsigned xo)
+{
+ BUG_ON(xo >= NUM_XO);
+
+ if (xo_votes[xo]) {
+ xo_votes[xo]--;
+ } else {
+ pr_warning("%s: Reference count mismatch!\n", __func__);
+ return;
+ }
+
+ if (xo_votes[xo] == 0) {
+ int enable = 0;
+ msm_proc_comm(PCOM_CLKCTL_RPC_SRC_REQUEST, &xo, &enable);
+ }
+}
+
+#define PLL_ACTIVE_MASK B(16)
+void pll_enable(uint32_t pll)
+{
+ uint32_t reg_val;
+ unsigned long flags;
+
+ BUG_ON(pll >= NUM_PLL);
+
+ spin_lock_irqsave(&pll_vote_lock, flags);
+ if (!pll_count[pll]) {
+ vote_for_xo(pll_to_xo[pll]);
+ reg_val = readl(PLL_ENA_REG);
+ reg_val |= (1 << pll);
+ writel(reg_val, PLL_ENA_REG);
+ }
+ pll_count[pll]++;
+ spin_unlock_irqrestore(&pll_vote_lock, flags);
+
+ /* Wait until PLL is enabled. */
+ while ((readl(pll_status_addr[pll]) & PLL_ACTIVE_MASK) == 0)
+ cpu_relax();
+}
+
+void pll_disable(uint32_t pll)
+{
+ uint32_t reg_val;
+ unsigned long flags;
+
+ BUG_ON(pll >= NUM_PLL);
+
+ spin_lock_irqsave(&pll_vote_lock, flags);
+ if (pll_count[pll]) {
+ pll_count[pll]--;
+ } else {
+ pr_warning("Reference count mismatch in PLL disable!\n");
+ goto out;
+ }
+
+ if (pll_count[pll] == 0) {
+ reg_val = readl(PLL_ENA_REG);
+ reg_val &= ~(1 << pll);
+ writel(reg_val, PLL_ENA_REG);
+ unvote_for_xo(pll_to_xo[pll]);
+ }
+out:
+ spin_unlock_irqrestore(&pll_vote_lock, flags);
+}
+
+static void src_enable(uint32_t src)
+{
+ switch (src) {
+ case SRC_NONE:
+ /*
+ * SRC_NONE is used as a placeholder for some freqencies that
+ * don't have any direct PLL dependency. Instead they source
+ * off an external/internal clock which takes care of any
+ * PLL or XO dependency.
+ */
+ break;
+ case SRC_TCXO:
+ vote_for_xo(TCXO);
+ break;
+ case SRC_AXI:
+ case SRC_LPXO:
+ /*
+ * AXI could use LPXO or TCXO. Map it to LPXO to make sure
+ * there is at least once XO available for the AXI (LPXO is
+ * the lower powered one so just use that).
+ */
+ vote_for_xo(LPXO);
+ break;
+ default:
+ pll_enable(src_pll_tbl[src]);
+ break;
+ }
+}
+
+static void src_disable(uint32_t src)
+{
+ switch (src) {
+ case SRC_NONE:
+ /*
+ * SRC_NONE is used as a placeholder for some freqencies that
+ * don't have any direct PLL dependency. Instead they source
+ * off an external/internal clock which takes care of any
+ * PLL or XO dependency.
+ */
+ break;
+ case SRC_TCXO:
+ unvote_for_xo(TCXO);
+ break;
+ case SRC_AXI:
+ case SRC_LPXO:
+ /*
+ * AXI could use LPXO or TCXO. Map it to LPXO to make sure
+ * there is at least once XO available for the AXI (LPXO is
+ * the lower powered one so just use that).
+ */
+ unvote_for_xo(LPXO);
+ break;
+ default:
+ pll_disable(src_pll_tbl[src]);
+ break;
+ }
+}
+
+static unsigned msmc1_votes[MSMC1_END];
+static unsigned msmc1_level;
+
+static int update_msmc1(void)
+{
+ int err, target, mvolts;
+
+ if (msmc1_votes[HIGH])
+ target = 1200;
+ else if (msmc1_votes[NOMINAL])
+ target = 1100;
+ else
+ target = 1000;
+
+ if (target == msmc1_level)
+ return 0;
+
+ mvolts = target;
+ err = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_MSMC1, &mvolts, NULL);
+ if (err)
+ goto out;
+
+ if (mvolts) {
+ err = -EINVAL;
+ goto out;
+ }
+ msmc1_level = target;
+out:
+ return err;
+}
+
+static void unvote_msmc1(unsigned level)
+{
+ if (level >= ARRAY_SIZE(msmc1_votes))
+ return;
+
+ if (msmc1_votes[level]) {
+ msmc1_votes[level]--;
+ } else {
+ pr_warning("%s: Reference counts are incorrect\n", __func__);
+ return;
+ }
+
+ update_msmc1();
+}
+
+static int vote_msmc1(unsigned level)
+{
+ int ret;
+
+ if (level >= ARRAY_SIZE(msmc1_votes))
+ return 0;
+
+ msmc1_votes[level]++;
+ ret = update_msmc1();
+ if (ret)
+ msmc1_votes[level]--;
+
+ return ret;
+}
+
+/*
+ * SoC specific register-based control of clocks.
+ */
+static int _soc_clk_enable(unsigned id)
+{
+ struct clk_local *t = &clk_local_tbl[id];
+ void *ns_reg = t->ns_reg;
+ uint32_t reg_val = 0;
+
+ WARN((t->type != NORATE) && (t->current_freq == &dummy_freq),
+ "Attempting to enable clock %d before setting its rate. "
+ "Set the rate first!\n", id);
+
+ reg_val = readl(ns_reg);
+ if (t->type == MND) {
+ /* mode can be either 0 or 1. So the R-value of the
+ * expression will evaluate to MNCNTR_EN_MASK or 0. This
+ * avoids the need for a "if(mode == 1)". A "&" will not work
+ * here. */
+ reg_val |= (MNCNTR_EN_MASK * t->current_freq->mode);
+ writel(reg_val, ns_reg);
+ }
+ if (t->root_en_mask) {
+ reg_val |= t->root_en_mask;
+ writel(reg_val, ns_reg);
+ }
+ if (t->br_en_mask) {
+ reg_val |= t->br_en_mask;
+ writel(reg_val, ns_reg);
+ }
+ if (t->halt_reg) {
+ uint32_t halted, count = 0;
+
+ /* Wait for the halt bit to clear, but timeout after 100usecs
+ * since the halt bit may be buggy. */
+ while ((halted = readl(t->halt_reg) & BIT(t->halt_mask))
+ && count++ < 100)
+ udelay(1);
+ if (halted)
+ pr_warning("%s: clock %d never turned on\n", __func__,
+ id);
+ }
+ return 0;
+}
+
+static void _soc_clk_disable(unsigned id)
+{
+ struct clk_local *t = &clk_local_tbl[id];
+ void *ns_reg = t->ns_reg;
+ uint32_t reg_val = 0;
+
+ reg_val = readl(ns_reg);
+
+ if (t->br_en_mask) {
+ reg_val &= ~(t->br_en_mask);
+ writel(reg_val, ns_reg);
+ }
+ if (t->halt_reg) {
+ uint32_t halted, count = 0;
+
+ /* Wait for the halt bit to be set, but timeout after 100usecs
+ * since the halt bit may be buggy. */
+ while (!(halted = readl(t->halt_reg) & BIT(t->halt_mask))
+ && count++ < 100)
+ udelay(1);
+ if (!halted)
+ pr_warning("%s: clock %d never turned off\n", __func__,
+ id);
+ }
+ if (t->root_en_mask) {
+ reg_val &= ~(t->root_en_mask);
+ writel(reg_val, ns_reg);
+ }
+ if (t->type == MND) {
+ reg_val &= ~MNCNTR_EN_MASK;
+ writel(reg_val, ns_reg);
+ }
+}
+
+static int soc_clk_enable_nolock(unsigned id)
+{
+ struct clk_local *t = &clk_local_tbl[id];
+ int ret = 0;
+
+ if (!t->count) {
+ ret = vote_msmc1(t->current_freq->msmc1);
+ if (ret)
+ return ret;
+ if (t->parent != C(NONE)) {
+ ret = soc_clk_enable_nolock(t->parent);
+ if (ret)
+ return ret;
+ }
+ src_enable(t->current_freq->src);
+ ret = _soc_clk_enable(id);
+ }
+ t->count++;
+
+ return ret;
+}
+
+static void soc_clk_disable_nolock(unsigned id)
+{
+ struct clk_local *t = &clk_local_tbl[id];
+
+ if (!t->count) {
+ pr_warning("Reference count mismatch in clock disable!\n");
+ return;
+ }
+ if (t->count)
+ t->count--;
+ if (t->count == 0) {
+ _soc_clk_disable(id);
+ src_disable(t->current_freq->src);
+ unvote_msmc1(t->current_freq->msmc1);
+ if (t->parent != C(NONE))
+ soc_clk_disable_nolock(t->parent);
+ }
+
+ return;
+}
+
+static int update_pwr_rail(unsigned id, int enable)
+{
+ /* TODO: Implement internal power rail control */
+ return 0;
+}
+
+static int soc_clk_enable(unsigned id)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_reg_lock, flags);
+ ret = soc_clk_enable_nolock(id);
+ if (ret)
+ goto unlock;
+ /*
+ * The modem might modify the register bits for the clock branch when
+ * the rail is enabled/disabled, so enable the rail inside the lock
+ * instead of outside it.
+ */
+ ret = update_pwr_rail(id, 1);
+ if (ret)
+ soc_clk_disable_nolock(id);
+unlock:
+ spin_unlock_irqrestore(&clock_reg_lock, flags);
+
+ return ret;
+}
+
+static void soc_clk_disable(unsigned id)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_reg_lock, flags);
+ update_pwr_rail(id, 0);
+ soc_clk_disable_nolock(id);
+ spin_unlock_irqrestore(&clock_reg_lock, flags);
+}
+
+static void soc_clk_auto_off(unsigned id)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_reg_lock, flags);
+ _soc_clk_disable(id);
+ spin_unlock_irqrestore(&clock_reg_lock, flags);
+}
+
+static long soc_clk_round_rate(unsigned id, unsigned rate)
+{
+ struct clk_local *t = &clk_local_tbl[id];
+ const struct clk_freq_tbl *f;
+
+ if (t->type != MND && t->type != BASIC)
+ return -EINVAL;
+
+ for (f = t->freq_tbl; f->freq_hz != FREQ_END; f++)
+ if (f->freq_hz >= rate)
+ return f->freq_hz;
+
+ return -EPERM;
+}
+
+static int soc_clk_set_rate(unsigned id, unsigned rate)
+{
+ struct clk_local *t = &clk_local_tbl[id];
+ const struct clk_freq_tbl *cf;
+ const struct clk_freq_tbl *nf;
+ uint32_t *chld = t->children;
+ void *ns_reg = t->ns_reg;
+ void *md_reg = t->md_reg;
+ uint32_t reg_val = 0;
+ int i, ret = 0;
+ unsigned long flags;
+ long rounded;
+
+ rounded = soc_clk_round_rate(id, rate);
+ if (rounded != rate)
+ pr_warning("Use clk_round_rate() before clk_set_rate() with "
+ "clock %u\n", id);
+ rate = rounded;
+
+ if (t->type != MND && t->type != BASIC)
+ return -EPERM;
+
+ spin_lock_irqsave(&clock_reg_lock, flags);
+ cf = t->current_freq;
+
+ if (rate == cf->freq_hz)
+ goto release_lock;
+
+ for (nf = t->freq_tbl; nf->freq_hz != FREQ_END; nf++)
+ if (nf->freq_hz == rate)
+ break;
+
+ if (nf->freq_hz == FREQ_END) {
+ ret = -EINVAL;
+ goto release_lock;
+ }
+
+ if (t->freq_mask == 0) {
+ t->current_freq = nf;
+ goto release_lock;
+ }
+
+ /* Disable all branches before changing rate to prevent jitter. */
+ for (i = 0; chld && chld[i] != C(NONE); i++) {
+ struct clk_local *ch = &clk_local_tbl[chld[i]];
+ /* Don't bother turning off if it is already off.
+ * Checking ch->count is cheaper (cache) than reading and
+ * writing to a register (uncached/unbuffered). */
+ if (ch->count) {
+ reg_val = readl(ch->ns_reg);
+ reg_val &= ~(ch->br_en_mask);
+ writel(reg_val, ch->ns_reg);
+ }
+ }
+
+ if (t->count) {
+ _soc_clk_disable(id);
+
+ ret = vote_msmc1(nf->msmc1);
+ if (ret)
+ goto msmc1_err;
+ /* Turn on PLL of the new freq. */
+ src_enable(nf->src);
+ }
+
+ /* Some clocks share the same register, so must be careful when
+ * assuming a register doesn't need to be re-read. */
+ reg_val = readl(ns_reg);
+ if (t->type == MND) {
+ reg_val |= MNCNTR_RST_MASK;
+ writel(reg_val, ns_reg);
+ /* TODO: Currently writing 0's into reserved bits for 8-bit
+ * MND. Can be avoided by adding md_mask. */
+ if (nf->mode)
+ writel(nf->md_val, md_reg);
+ reg_val &= ~MNCNTR_MODE_MASK;
+ reg_val |= (MNCNTR_MODE * nf->mode);
+ }
+ reg_val &= ~(t->freq_mask);
+ reg_val |= nf->ns_val;
+ writel(reg_val, ns_reg);
+
+ if (t->type == MND) {
+ reg_val &= ~MNCNTR_RST_MASK;
+ writel(reg_val, ns_reg);
+ }
+
+ if (t->count) {
+ /* Turn off PLL of the old freq. */
+ src_disable(cf->src);
+ unvote_msmc1(cf->msmc1);
+ }
+
+ /* Current freq must be updated before _soc_clk_enable() is called to
+ * make sure the MNCNTR_E bit is set correctly. */
+ t->current_freq = nf;
+
+msmc1_err:
+ if (t->count)
+ _soc_clk_enable(id);
+ /* Enable only branches that were ON before. */
+ for (i = 0; chld && chld[i] != C(NONE); i++) {
+ struct clk_local *ch = &clk_local_tbl[chld[i]];
+ if (ch->count) {
+ reg_val = readl(ch->ns_reg);
+ reg_val |= ch->br_en_mask;
+ writel(reg_val, ch->ns_reg);
+ }
+ }
+
+release_lock:
+ spin_unlock_irqrestore(&clock_reg_lock, flags);
+ return ret;
+}
+
+static int soc_clk_set_min_rate(unsigned id, unsigned rate)
+{
+ long rounded = soc_clk_round_rate(id, rate);
+ return soc_clk_set_rate(id, rounded);
+}
+
+static int soc_clk_set_max_rate(unsigned id, unsigned rate)
+{
+ return -EPERM;
+}
+
+static int soc_clk_set_flags(unsigned id, unsigned clk_flags)
+{
+ uint32_t regval, ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_reg_lock, flags);
+ switch (id) {
+ case C(VFE):
+ regval = readl(CAM_VFE_NS_REG);
+ /* Flag values chosen for backward compatibility
+ * with proc_comm remote clock control. */
+ if (clk_flags == 0x00000100) {
+ /* Select external source. */
+ regval |= B(14);
+ } else if (clk_flags == 0x00000200) {
+ /* Select internal source. */
+ regval &= ~B(14);
+ } else
+ ret = -EINVAL;
+
+ writel(regval, CAM_VFE_NS_REG);
+ break;
+ default:
+ ret = -EPERM;
+ }
+ spin_unlock_irqrestore(&clock_reg_lock, flags);
+
+ return ret;
+}
+
+static unsigned soc_clk_get_rate(unsigned id)
+{
+ struct clk_local *t = &clk_local_tbl[id];
+ unsigned long flags;
+ unsigned ret = 0;
+
+ if (t->type == NORATE)
+ return 0;
+
+ spin_lock_irqsave(&clock_reg_lock, flags);
+ ret = t->current_freq->freq_hz;
+ spin_unlock_irqrestore(&clock_reg_lock, flags);
+
+ /* Return 0 if the rate has never been set. Might not be correct,
+ * but it's good enough. */
+ if (ret == FREQ_END)
+ ret = 0;
+
+ return ret;
+}
+
+static unsigned soc_clk_is_enabled(unsigned id)
+{
+ return !!(clk_local_tbl[id].count);
+}
+
+
+struct clk_ops clk_ops_7x30 = {
+ .enable = soc_clk_enable,
+ .disable = soc_clk_disable,
+ .auto_off = soc_clk_auto_off,
+ .set_rate = soc_clk_set_rate,
+ .set_min_rate = soc_clk_set_min_rate,
+ .set_max_rate = soc_clk_set_max_rate,
+ .reset = pc_clk_reset,
+ .set_flags = soc_clk_set_flags,
+ .get_rate = soc_clk_get_rate,
+ .is_enabled = soc_clk_is_enabled,
+ .round_rate = soc_clk_round_rate,
+};
+
+/*
+ * Clock ownership detection code
+ */
+
+enum {
+ SH2_OWN_GLBL,
+ SH2_OWN_APPS1,
+ SH2_OWN_APPS2,
+ SH2_OWN_ROW1,
+ SH2_OWN_ROW2,
+ SH2_OWN_APPS3,
+ NUM_OWNERSHIP
+};
+static __initdata uint32_t ownership_regs[NUM_OWNERSHIP];
+
+static void __init cache_ownership(void)
+{
+ ownership_regs[SH2_OWN_GLBL] = readl(SH2_OWN_GLBL_BASE_REG);
+ ownership_regs[SH2_OWN_APPS1] = readl(SH2_OWN_APPS1_BASE_REG);
+ ownership_regs[SH2_OWN_APPS2] = readl(SH2_OWN_APPS2_BASE_REG);
+ ownership_regs[SH2_OWN_ROW1] = readl(SH2_OWN_ROW1_BASE_REG);
+ ownership_regs[SH2_OWN_ROW2] = readl(SH2_OWN_ROW2_BASE_REG);
+ ownership_regs[SH2_OWN_APPS3] = readl(SH2_OWN_APPS3_BASE_REG);
+}
+
+static void __init print_ownership(void)
+{
+ pr_info("Clock ownership\n");
+ pr_info(" GLBL : %08x\n", ownership_regs[SH2_OWN_GLBL]);
+ pr_info(" APPS : %08x %08x %08x\n", ownership_regs[SH2_OWN_APPS1],
+ ownership_regs[SH2_OWN_APPS2], ownership_regs[SH2_OWN_APPS3]);
+ pr_info(" ROW : %08x %08x\n", ownership_regs[SH2_OWN_ROW1],
+ ownership_regs[SH2_OWN_ROW2]);
+}
+
+/*
+ * This is a many-to-one mapping since we don't know how the remote clock code
+ * has decided to handle the dependencies between clocks for a particular
+ * hardware block. We determine the ownership for all the clocks on a block by
+ * checking the ownership bit of one register (usually the ns register).
+ */
+#define O(x) (&ownership_regs[(x)])
+static const struct clk_local_ownership {
+ const uint32_t *reg;
+ const uint32_t bit;
+} ownership_map[] __initconst = {
+ [C(GRP_2D)] = { O(SH2_OWN_APPS1), B(6) },
+ [C(GRP_2D_P)] = { O(SH2_OWN_APPS1), B(6) },
+ [C(HDMI)] = { O(SH2_OWN_APPS1), B(31) },
+ [C(JPEG)] = { O(SH2_OWN_APPS1), B(0) },
+ [C(JPEG_P)] = { O(SH2_OWN_APPS1), B(0) },
+ [C(LPA_CODEC)] = { O(SH2_OWN_APPS1), B(23) },
+ [C(LPA_CORE)] = { O(SH2_OWN_APPS1), B(23) },
+ [C(LPA_P)] = { O(SH2_OWN_APPS1), B(23) },
+ [C(MI2S_M)] = { O(SH2_OWN_APPS1), B(28) },
+ [C(MI2S_S)] = { O(SH2_OWN_APPS1), B(28) },
+ [C(MI2S_CODEC_RX_M)] = { O(SH2_OWN_APPS1), B(12) },
+ [C(MI2S_CODEC_RX_S)] = { O(SH2_OWN_APPS1), B(12) },
+ [C(MI2S_CODEC_TX_M)] = { O(SH2_OWN_APPS1), B(14) },
+ [C(MI2S_CODEC_TX_S)] = { O(SH2_OWN_APPS1), B(14) },
+ [C(MIDI)] = { O(SH2_OWN_APPS1), B(22) },
+ [C(SDAC)] = { O(SH2_OWN_APPS1), B(26) },
+ [C(SDAC_M)] = { O(SH2_OWN_APPS1), B(26) },
+ [C(VFE)] = { O(SH2_OWN_APPS1), B(8) },
+ [C(VFE_CAMIF)] = { O(SH2_OWN_APPS1), B(8) },
+ [C(VFE_MDC)] = { O(SH2_OWN_APPS1), B(8) },
+ [C(VFE_P)] = { O(SH2_OWN_APPS1), B(8) },
+
+ [C(GRP_3D)] = { O(SH2_OWN_APPS2), B(0) },
+ [C(GRP_3D_P)] = { O(SH2_OWN_APPS2), B(0) },
+ [C(GRP_3D_SRC)] = { O(SH2_OWN_APPS2), B(0) },
+ [C(IMEM)] = { O(SH2_OWN_APPS2), B(0) },
+ [C(MDP_LCDC_PAD_PCLK)] = { O(SH2_OWN_APPS2), B(4) },
+ [C(MDP_LCDC_PCLK)] = { O(SH2_OWN_APPS2), B(4) },
+ [C(MDP_P)] = { O(SH2_OWN_APPS2), B(4) },
+ [C(MDP_VSYNC)] = { O(SH2_OWN_APPS2), B(28) },
+ [C(TSIF_REF)] = { O(SH2_OWN_APPS2), B(5) },
+ [C(TSIF_P)] = { O(SH2_OWN_APPS2), B(5) },
+ [C(TV)] = { O(SH2_OWN_APPS2), B(2) },
+ [C(TV_DAC)] = { O(SH2_OWN_APPS2), B(2) },
+ [C(TV_ENC)] = { O(SH2_OWN_APPS2), B(2) },
+
+ [C(EMDH)] = { O(SH2_OWN_ROW1), B(7) },
+ [C(EMDH_P)] = { O(SH2_OWN_ROW1), B(7) },
+ [C(I2C)] = { O(SH2_OWN_ROW1), B(11) },
+ [C(I2C_2)] = { O(SH2_OWN_ROW1), B(12) },
+ [C(MDC)] = { O(SH2_OWN_ROW1), B(17) },
+ [C(PMDH)] = { O(SH2_OWN_ROW1), B(19) },
+ [C(PMDH_P)] = { O(SH2_OWN_ROW1), B(19) },
+ [C(SDC1)] = { O(SH2_OWN_ROW1), B(23) },
+ [C(SDC1_P)] = { O(SH2_OWN_ROW1), B(23) },
+ [C(SDC2)] = { O(SH2_OWN_ROW1), B(25) },
+ [C(SDC2_P)] = { O(SH2_OWN_ROW1), B(25) },
+ [C(SDC3)] = { O(SH2_OWN_ROW1), B(27) },
+ [C(SDC3_P)] = { O(SH2_OWN_ROW1), B(27) },
+ [C(SDC4)] = { O(SH2_OWN_ROW1), B(29) },
+ [C(SDC4_P)] = { O(SH2_OWN_ROW1), B(29) },
+ [C(UART2)] = { O(SH2_OWN_ROW1), B(0) },
+ [C(USB_HS2)] = { O(SH2_OWN_ROW1), B(2) },
+ [C(USB_HS2_CORE)] = { O(SH2_OWN_ROW1), B(2) },
+ [C(USB_HS2_P)] = { O(SH2_OWN_ROW1), B(2) },
+ [C(USB_HS3)] = { O(SH2_OWN_ROW1), B(4) },
+ [C(USB_HS3_CORE)] = { O(SH2_OWN_ROW1), B(4) },
+ [C(USB_HS3_P)] = { O(SH2_OWN_ROW1), B(4) },
+
+ [C(QUP_I2C)] = { O(SH2_OWN_ROW2), B(3) },
+ [C(SPI)] = { O(SH2_OWN_ROW2), B(1) },
+ [C(SPI_P)] = { O(SH2_OWN_ROW2), B(1) },
+ [C(UART1)] = { O(SH2_OWN_ROW2), B(9) },
+ [C(UART1DM)] = { O(SH2_OWN_ROW2), B(6) },
+ [C(UART1DM_P)] = { O(SH2_OWN_ROW2), B(6) },
+ [C(UART2DM)] = { O(SH2_OWN_ROW2), B(8) },
+ [C(UART2DM_P)] = { O(SH2_OWN_ROW2), B(8) },
+ [C(USB_HS)] = { O(SH2_OWN_ROW2), B(11) },
+ [C(USB_HS_CORE)] = { O(SH2_OWN_ROW2), B(11) },
+ [C(USB_HS_SRC)] = { O(SH2_OWN_ROW2), B(11) },
+ [C(USB_HS_P)] = { O(SH2_OWN_ROW2), B(11) },
+
+ [C(CAM_M)] = { O(SH2_OWN_APPS3), B(6) },
+ [C(CAMIF_PAD_P)] = { O(SH2_OWN_APPS3), B(6) },
+ [C(CSI0)] = { O(SH2_OWN_APPS3), B(11) },
+ [C(CSI0_VFE)] = { O(SH2_OWN_APPS3), B(11) },
+ [C(CSI0_P)] = { O(SH2_OWN_APPS3), B(11) },
+ [C(MDP)] = { O(SH2_OWN_APPS3), B(0) },
+ [C(MFC)] = { O(SH2_OWN_APPS3), B(2) },
+ [C(MFC_DIV2)] = { O(SH2_OWN_APPS3), B(2) },
+ [C(MFC_P)] = { O(SH2_OWN_APPS3), B(2) },
+ [C(VPE)] = { O(SH2_OWN_APPS3), B(4) },
+
+ [C(ADM)] = { O(SH2_OWN_GLBL), B(8) },
+ [C(ADM_P)] = { O(SH2_OWN_GLBL), B(13) },
+ [C(CE)] = { O(SH2_OWN_GLBL), B(8) },
+ [C(AXI_ROTATOR)] = { O(SH2_OWN_GLBL), B(13) },
+ [C(ROTATOR_IMEM)] = { O(SH2_OWN_GLBL), B(13) },
+ [C(ROTATOR_P)] = { O(SH2_OWN_GLBL), B(13) },
+};
+
+static bool __init clk_is_local(uint32_t id)
+{
+ uint32_t bit = ownership_map[id].bit;
+ const uint32_t *reg = ownership_map[id].reg;
+
+ BUG_ON(id >= ARRAY_SIZE(ownership_map) || !reg);
+
+ return *reg & bit;
+}
+
+static const struct reg_init {
+ const void __iomem *reg;
+ uint32_t mask;
+ uint32_t val;
+} ri_list[] __initconst = {
+ /* Enable UMDX_P clock. Known to causes issues, so never turn off. */
+ {GLBL_CLK_ENA_2_SC_REG, B(2), B(2)},
+
+ {EMDH_NS_REG, BM(18, 17) , BVAL(18, 17, 0x3)}, /* RX div = div-4. */
+ {PMDH_NS_REG, BM(18, 17), BVAL(18, 17, 0x3)}, /* RX div = div-4. */
+ /* MI2S_CODEC_RX_S src = MI2S_CODEC_RX_M. */
+ {MI2S_RX_NS_REG, B(14), 0x0},
+ /* MI2S_CODEC_TX_S src = MI2S_CODEC_TX_M. */
+ {MI2S_TX_NS_REG, B(14), 0x0},
+ {MI2S_NS_REG, B(14), 0x0}, /* MI2S_S src = MI2S_M. */
+ /* Allow DSP to decide the LPA CORE src. */
+ {LPA_CORE_CLK_MA0_REG, B(0), B(0)},
+ {LPA_CORE_CLK_MA2_REG, B(0), B(0)},
+ {MI2S_CODEC_RX_DIV_REG, 0xF, 0xD}, /* MI2S_CODEC_RX_S div = div-8. */
+ {MI2S_CODEC_TX_DIV_REG, 0xF, 0xD}, /* MI2S_CODEC_TX_S div = div-8. */
+ {MI2S_DIV_REG, 0xF, 0x7}, /* MI2S_S div = div-8. */
+ {MDC_NS_REG, 0x3, 0x3}, /* MDC src = external MDH src. */
+ {SDAC_NS_REG, BM(15, 14), 0x0}, /* SDAC div = div-1. */
+ /* Disable sources TCXO/5 & TCXO/6. UART1 src = TCXO*/
+ {UART_NS_REG, BM(26, 25) | BM(2, 0), 0x0},
+ {MDP_VSYNC_REG, 0xC, 0x4}, /* MDP VSYNC src = LPXO. */
+ /* HDMI div = div-1, non-inverted. tv_enc_src = tv_clk_src */
+ {HDMI_NS_REG, 0x7, 0x0},
+ {TV_NS_REG, BM(15, 14), 0x0}, /* tv_clk_src_div2 = div-1 */
+
+ /* USBH core clocks src = USB_HS_SRC. */
+ {USBH_NS_REG, B(15), B(15)},
+ {USBH2_NS_REG, B(6), B(6)},
+ {USBH3_NS_REG, B(6), B(6)},
+};
+
+/* SoC-specific clk_ops initialization. */
+void __init msm_clk_soc_set_ops(struct clk *clk)
+{
+ if (!clk->ops) {
+ if (clk_is_local(clk->id))
+ clk->ops = &clk_ops_7x30;
+ else {
+ clk->ops = &clk_ops_pcom;
+ clk->id = clk->remote_id;
+ }
+ }
+}
+
+#define set_1rate(clk) \
+ soc_clk_set_rate(C(clk), clk_local_tbl[C(clk)].freq_tbl->freq_hz)
+void __init msm_clk_soc_init(void)
+{
+ int i;
+ uint32_t val;
+
+ cache_ownership();
+ print_ownership();
+
+ /* When we have no local clock control, the rest of the code in this
+ * function is a NOP since writes to shadow regions that we don't own
+ * are ignored. */
+
+ /* Disable all the child clocks of USB_HS_SRC. This needs to be done
+ * before the register init loop since it changes the source of the
+ * USB HS core clocks. */
+ for (i = 0; chld_usb_src[i] != C(NONE); i++)
+ if (clk_is_local(chld_usb_src[i]))
+ _soc_clk_disable(chld_usb_src[i]);
+
+ if (clk_is_local(C(USB_HS_SRC)))
+ soc_clk_set_rate(C(USB_HS_SRC), clk_tbl_usb[0].freq_hz);
+
+ for (i = 0; i < ARRAY_SIZE(ri_list); i++) {
+ val = readl(ri_list[i].reg);
+ val &= ~ri_list[i].mask;
+ val |= ri_list[i].val;
+ writel(val, ri_list[i].reg);
+ }
+
+ set_1rate(I2C);
+ set_1rate(I2C_2);
+ set_1rate(QUP_I2C);
+ set_1rate(UART1);
+ set_1rate(UART2);
+ set_1rate(MI2S_M);
+ set_1rate(MIDI);
+ set_1rate(MDP_VSYNC);
+ set_1rate(LPA_CODEC);
+ set_1rate(GLBL_ROOT);
+
+ /* Sync the GRP2D clock to AXI */
+ soc_clk_set_rate(C(GRP_2D), 1);
+}
diff --git a/arch/arm/mach-msm/clock-7x30.h b/arch/arm/mach-msm/clock-7x30.h
index e16f72f..d41acb7 100644
--- a/arch/arm/mach-msm/clock-7x30.h
+++ b/arch/arm/mach-msm/clock-7x30.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
@@ -33,6 +33,8 @@
enum {
L_7X30_NONE_CLK = -1,
L_7X30_ADM_CLK,
+ L_7X30_ADM_P_CLK,
+ L_7X30_CE_CLK,
L_7X30_I2C_CLK,
L_7X30_I2C_2_CLK,
L_7X30_QUP_I2C_CLK,
@@ -135,17 +137,30 @@ enum {
L_7X30_NR_CLKS
};
-struct clk_ops;
-extern struct clk_ops clk_ops_7x30;
-
-struct clk_ops *clk_7x30_is_local(uint32_t id);
-int clk_7x30_init(void);
-
void pll_enable(uint32_t pll);
void pll_disable(uint32_t pll);
+enum {
+ PLL_0 = 0,
+ PLL_1,
+ PLL_2,
+ PLL_3,
+ PLL_4,
+ PLL_5,
+ PLL_6,
+ NUM_PLL
+};
+
+enum {
+ LOW,
+ NOMINAL,
+ HIGH,
+ MSMC1_END
+};
+
extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable);
+extern struct clk_ops clk_ops_7x30;
#define CLK_7X30(clk_name, clk_id, clk_dev, clk_flags) { \
.name = clk_name, \
.id = L_7X30_##clk_id, \
@@ -164,5 +179,14 @@ extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable);
.dbg_name = #l_id, \
}
+#define CLK_7X30L(clk_name, l_id, clk_dev, clk_flags) { \
+ .name = clk_name, \
+ .id = L_7X30_##l_id, \
+ .flags = clk_flags, \
+ .dev = clk_dev, \
+ .dbg_name = #l_id, \
+ .ops = &clk_ops_7x30, \
+ }
+
#endif
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
index 8c2b4dd..56c7549 100644
--- a/arch/arm/mach-msm/clock.c
+++ b/arch/arm/mach-msm/clock.c
@@ -162,21 +162,16 @@ EXPORT_SYMBOL(clk_set_flags);
*/
static struct clk *ebi1_clk;
-static void __init set_clock_ops(struct clk *clk)
-{
- if (!clk->ops) {
- clk->ops = &clk_ops_pcom;
- clk->id = clk->remote_id;
- }
-}
-
void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks)
{
unsigned n;
+ /* Do SoC-speficic clock init operations. */
+ msm_clk_soc_init();
+
mutex_lock(&clocks_mutex);
for (n = 0; n < num_clocks; n++) {
- set_clock_ops(&clock_tbl[n]);
+ msm_clk_soc_set_ops(&clock_tbl[n]);
list_add_tail(&clock_tbl[n].list, &clocks);
}
mutex_unlock(&clocks_mutex);
diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h
index 70216b0..4841ab6 100644
--- a/arch/arm/mach-msm/clock.h
+++ b/arch/arm/mach-msm/clock.h
@@ -62,6 +62,18 @@ struct clk {
#define CLK_MAX CLKFLAG_MAX
#define CLK_MINMAX (CLK_MIN | CLK_MAX)
+#ifdef CONFIG_ARCH_MSM7X30
+void __init msm_clk_soc_set_ops(struct clk *clk);
+#else
+static inline void __init msm_clk_soc_set_ops(struct clk *clk) { }
+#endif
+
+#if defined(CONFIG_ARCH_MSM7X30)
+void __init msm_clk_soc_init(void);
+#else
+static inline void __init msm_clk_soc_init(void) { }
+#endif
+
#ifdef CONFIG_DEBUG_FS
int __init clock_debug_init(void);
int __init clock_debug_add(struct clk *clock);
diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h
index 12da4ca..e2f2d5a 100644
--- a/arch/arm/mach-msm/proc_comm.h
+++ b/arch/arm/mach-msm/proc_comm.h
@@ -137,6 +137,7 @@ enum {
PCOM_CLKCTL_RPC_RAIL_DISABLE,
PCOM_CLKCTL_RPC_RAIL_CONTROL,
PCOM_CLKCTL_RPC_MIN_MSMC1,
+ PCOM_CLKCTL_RPC_SRC_REQUEST,
PCOM_NUM_CMDS,
};
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
More information about the linux-arm-kernel
mailing list