[PATCH v5 4/7] OMAP3630: PM: Erratum i608: disable RTA
Nishanth Menon
nm at ti.com
Mon Dec 20 15:05:06 EST 2010
Erratum id: i608
RTA (Retention Till Access) feature is not supported and leads to device
stability issues when enabled. This impacts modules with embedded memories
on OMAP3630
Workaround is to disable RTA on boot and coming out of core off.
For disabling RTA coming out of off mode, we do this by overriding the
restore pointer for 3630 as the first point of entry before caches are
touched and is common for GP and HS devices. To disable earlier than
this could be possible by modifying the PPA for HS devices, but not for
GP devices.
Cc: Kevin Hilman <khilman at deeprootsystems.com>
Cc: Tony Lindgren <tony at atomide.com>
Acked-by: Jean Pihet <j-pihet at ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
[ambresh at ti.com: co-developer]
Signed-off-by: Ambresh K <ambresh at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
v5: minor correction in commit message, RTA is used with caps
v4:
control register handling moved to control.c
errata handling framework introduction split out
into a separate patch
v3: http://marc.info/?t=129140247800026&r=1&w=2
additional comment to explain Ambresh's contrib
removed the redundant check for cpu_is34xx - it is already
done by pm_init
pm_errata_configure is __init
v2: https://patchwork.kernel.org/patch/365242/
fixed missing b restore for 3430 es3.1 code.
introduced erratum handling logic here splitting it out of uart errata
typo fixes for erratum
v1: http://marc.info/?l=linux-omap&m=129013172825240&w=2
arch/arm/mach-omap2/control.c | 13 ++++++++++++-
arch/arm/mach-omap2/control.h | 7 ++++++-
arch/arm/mach-omap2/pm.h | 2 ++
arch/arm/mach-omap2/pm34xx.c | 10 ++++++++++
arch/arm/mach-omap2/sleep34xx.S | 26 ++++++++++++++++++++++++++
5 files changed, 56 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 1fa3294..27ed558 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -241,7 +241,10 @@ void omap3_save_scratchpad_contents(void)
/* Populate the Scratchpad contents */
scratchpad_contents.boot_config_ptr = 0x0;
- if (omap_rev() != OMAP3430_REV_ES3_0 &&
+ if (cpu_is_omap3630())
+ scratchpad_contents.public_restore_ptr =
+ virt_to_phys(get_omap3630_restore_pointer());
+ else if (omap_rev() != OMAP3430_REV_ES3_0 &&
omap_rev() != OMAP3430_REV_ES3_1)
scratchpad_contents.public_restore_ptr =
virt_to_phys(get_restore_pointer());
@@ -474,4 +477,12 @@ void omap3_control_restore_context(void)
omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
return;
}
+
+void omap3630_ctrl_disable_rta(void)
+{
+ if (!cpu_is_omap3630())
+ return;
+ omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
+}
+
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b6c6b7c..ec98dd7 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -204,6 +204,10 @@
#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
+/* 36xx-only RTA - Retention till Accesss control registers and bits */
+#define OMAP36XX_CONTROL_MEM_RTA_CTRL 0x40C
+#define OMAP36XX_RTA_DISABLE 0x0
+
/* 34xx D2D idle-related pins, handled by PM core */
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
@@ -347,10 +351,11 @@ extern void omap3_save_scratchpad_contents(void);
extern void omap3_clear_scratchpad_contents(void);
extern u32 *get_restore_pointer(void);
extern u32 *get_es3_restore_pointer(void);
+extern u32 *get_omap3630_restore_pointer(void);
extern u32 omap3_arm_context[128];
extern void omap3_control_save_context(void);
extern void omap3_control_restore_context(void);
-
+extern void omap3630_ctrl_disable_rta(void);
#else
#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 0348fd7..8d9aa3e 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -85,6 +85,8 @@ extern unsigned int save_secure_ram_context_sz;
extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap34xx_cpu_suspend_sz;
+#define PM_RTA_ERRATUM_i608 (1 << 0)
+
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
extern u16 pm34xx_errata;
#define IS_PM34XX_ERRATUM(id) (pm34xx_errata & (id))
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 5702f41..a404387 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -1007,6 +1007,8 @@ void omap_push_sram_idle(void)
static void __init pm_errata_configure(void)
{
+ if (cpu_is_omap3630())
+ pm34xx_errata |= PM_RTA_ERRATUM_i608;
}
static int __init omap3_pm_init(void)
@@ -1067,6 +1069,14 @@ static int __init omap3_pm_init(void)
pm_idle = omap3_pm_idle;
omap3_idle_init();
+ /*
+ * RTA is disabled during initialization as per erratum i608
+ * it is safer to disable RTA by the bootloader, but we would like
+ * to be doubly sure here and prevent any mishaps.
+ */
+ if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
+ omap3630_ctrl_disable_rta();
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 24ecb0a..4abf447 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -45,6 +45,8 @@
#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
#define SRAM_BASE_P 0x40200000
#define CONTROL_STAT 0x480022F0
+#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE\
+ + OMAP36XX_CONTROL_MEM_RTA_CTRL)
#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
* available */
#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
@@ -99,6 +101,14 @@ ENTRY(get_restore_pointer)
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_restore_pointer_sz)
.word . - get_restore_pointer
+ .text
+/* Function call to get the restore pointer for 3630 resume from OFF */
+ENTRY(get_omap3630_restore_pointer)
+ stmfd sp!, {lr} @ save registers on stack
+ adr r0, restore_3630
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(get_omap3630_restore_pointer_sz)
+ .word . - get_omap3630_restore_pointer
.text
/* Function call to get the restore pointer for for ES3 to resume from OFF */
@@ -246,6 +256,20 @@ copy_to_sram:
bne copy_to_sram
ldr r1, sram_base
blx r1
+ b restore
+
+restore_3630:
+ /*b restore_es3630*/ @ Enable to debug restore code
+ ldr r1, pm_prepwstst_core_p
+ ldr r2, [r1]
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if previous power state of CORE is OFF
+ bne restore
+ /* Disable RTA before giving control */
+ ldr r1, control_mem_rta
+ mov r2, #OMAP36XX_RTA_DISABLE
+ str r2, [r1]
+ /* Fall thru for the remaining logic */
restore:
/* b restore*/ @ Enable to debug restore code
/* Check what was the reason for mpu reset and store the reason in r9*/
@@ -651,6 +675,8 @@ cache_pred_disable_mask:
.word 0xFFFFE7FB
control_stat:
.word CONTROL_STAT
+control_mem_rta:
+ .word CONTROL_MEM_RTA_CTRL
kernel_flush:
.word v7_flush_dcache_all
/*
--
1.6.3.3
More information about the linux-arm-kernel
mailing list