[PATCH] leds/h1940: Use gpiolib for latch access / fix build failure
Peter Huewe
peterhuewe at gmx.de
Thu Dec 9 17:04:52 EST 2010
This patch fixes a build failure by converting leds-h1940.c to use
gpiolib for latch access introduced by 14477095abc6
(ARM: h1940: Use gpiolib for latch access)
Unfortunately this driver was not converted back then.
Signed-off-by: Peter Huewe <peterhuewe at gmx.de>
---
KernelVersion: linux-next-20101209
Build failure:
CC [M] drivers/leds/leds-h1940.o
drivers/leds/leds-h1940.c: In function 'h1940_greenled_set':
drivers/leds/leds-h1940.c:33: error: implicit declaration of function 'h1940_latch_control'
make[2]: *** [drivers/leds/leds-h1940
drivers/leds/leds-h1940.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 173d104..7811701 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -30,17 +30,17 @@ static void h1940_greenled_set(struct led_classdev *led_dev,
{
switch (value) {
case LED_HALF:
- h1940_latch_control(0, H1940_LATCH_LED_FLASH);
+ gpio_set_value(H1940_LATCH_LED_FLASH, 1);
s3c2410_gpio_setpin(S3C2410_GPA7, 1);
break;
case LED_FULL:
- h1940_latch_control(0, H1940_LATCH_LED_GREEN);
+ gpio_set_value(H1940_LATCH_LED_GREEN, 1);
s3c2410_gpio_setpin(S3C2410_GPA7, 1);
break;
default:
case LED_OFF:
- h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
- h1940_latch_control(H1940_LATCH_LED_GREEN, 0);
+ gpio_set_value(H1940_LATCH_LED_FLASH, 0);
+ gpio_set_value(H1940_LATCH_LED_GREEN, 0);
s3c2410_gpio_setpin(S3C2410_GPA7, 0);
break;
}
@@ -60,17 +60,17 @@ static void h1940_redled_set(struct led_classdev *led_dev,
{
switch (value) {
case LED_HALF:
- h1940_latch_control(0, H1940_LATCH_LED_FLASH);
+ gpio_set_value(H1940_LATCH_LED_FLASH, 1);
s3c2410_gpio_setpin(S3C2410_GPA1, 1);
break;
case LED_FULL:
- h1940_latch_control(0, H1940_LATCH_LED_RED);
+ gpio_set_value(H1940_LATCH_LED_RED, 1);
s3c2410_gpio_setpin(S3C2410_GPA1, 1);
break;
default:
case LED_OFF:
- h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
- h1940_latch_control(H1940_LATCH_LED_RED, 0);
+ gpio_set_value(H1940_LATCH_LED_FLASH, 0);
+ gpio_set_value(H1940_LATCH_LED_RED, 0);
s3c2410_gpio_setpin(S3C2410_GPA1, 0);
break;
}
@@ -91,10 +91,10 @@ static void h1940_blueled_set(struct led_classdev *led_dev,
{
if (value) {
/* flashing Blue */
- h1940_latch_control(0, H1940_LATCH_LED_FLASH);
+ gpio_set_value(H1940_LATCH_LED_FLASH, 1);
s3c2410_gpio_setpin(S3C2410_GPA3, 1);
} else {
- h1940_latch_control(H1940_LATCH_LED_FLASH, 0);
+ gpio_set_value(H1940_LATCH_LED_FLASH, 0);
s3c2410_gpio_setpin(S3C2410_GPA3, 0);
}
--
1.7.2.2
More information about the linux-arm-kernel
mailing list