[PATCH v6 09/10] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
Anand Sawant
sawant at ti.com
Tue Dec 28 12:07:49 EST 2010
Thara,
Few comments on the changes in voltage layer ...
> -----Original Message-----
> From: Thara Gopinath [mailto:thara at ti.com]
> Sent: Monday, December 20, 2010 10:29 PM
> To: linux-omap at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org
> Cc: khilman at deeprootsystems.com; paul at pwsan.com; b-
> cousson at ti.com; vishwanath.bs at ti.com; sawant at ti.com;
> nm at ti.com; Thara Gopinath
> Subject: [PATCH v6 09/10] OMAP3: PM: Adding debug support to
> Voltage and Smartreflex drivers
>
> This patch adds debug support to the voltage and smartreflex
> drivers.
> This means a whole bunch of voltage processor and
> smartreflex
> parameters are now visible through the pm debugfs.
> The voltage parameters can be viewed at
> /debug/voltage/vdd_<x>/<parameter>
> and the smartreflex parameters can be viewed at
> /debug/voltage/vdd_<x>/smartreflex/<parameter>
>
> Also smartreflex n-target values are now exposed out at
> /debug/voltage/vdd_<x>/smartreflex/nvalue/<voltage>
>
> The interface to access smartreflex n-target values is a
> read-write interface which means user has the flexibility
> to change the n-target values for any opp.
>
> Signed-off-by: Thara Gopinath <thara at ti.com>
> ---
> arch/arm/mach-omap2/smartreflex.c | 46
> ++++++++++++++++++++++++-
> arch/arm/mach-omap2/voltage.c | 66
> +++++++++++++++++++++++++++++++++++++
> 2 files changed, 110 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/smartreflex.c
> b/arch/arm/mach-omap2/smartreflex.c
> index eee23d0..52a05b3 100644
> --- a/arch/arm/mach-omap2/smartreflex.c
> +++ b/arch/arm/mach-omap2/smartreflex.c
> @@ -31,6 +31,7 @@
> #include "pm.h"
>
> #define SMARTREFLEX_NAME_LEN 16
> +#define NVALUE_NAME_LEN 40
> #define SR_DISABLE_TIMEOUT 200
>
> struct omap_sr {
> @@ -817,8 +818,9 @@ static int __init omap_sr_probe(struct
> platform_device *pdev)
> struct omap_sr *sr_info = kzalloc(sizeof(struct
> omap_sr), GFP_KERNEL);
> struct omap_sr_data *pdata = pdev->dev.platform_data;
> struct resource *mem, *irq;
> - struct dentry *vdd_dbg_dir, *dbg_dir;
> - int ret = 0;
> + struct dentry *vdd_dbg_dir, *dbg_dir, *nvalue_dir;
> + struct omap_volt_data *volt_data;
> + int i, ret = 0;
>
> if (!sr_info) {
> dev_err(&pdev->dev, "%s: unable to allocate
> sr_info\n",
> @@ -897,6 +899,46 @@ static int __init omap_sr_probe(struct
> platform_device *pdev)
>
> (void) debugfs_create_file("autocomp", S_IRUGO |
> S_IWUGO, dbg_dir,
> (void *)sr_info, &pm_sr_fops);
> + (void) debugfs_create_x32("errweight", S_IRUGO,
> dbg_dir,
> + &sr_info->err_weight);
> + (void) debugfs_create_x32("errmaxlimit", S_IRUGO,
> dbg_dir,
> + &sr_info->err_maxlimit);
> + (void) debugfs_create_x32("errminlimit", S_IRUGO,
> dbg_dir,
> + &sr_info->err_minlimit);
> +
> + nvalue_dir = debugfs_create_dir("nvalue", dbg_dir);
> + if (IS_ERR(nvalue_dir)) {
> + dev_err(&pdev->dev, "%s: Unable to create
> debugfs directory"
> + "for n-values\n", __func__);
> + return PTR_ERR(nvalue_dir);
> + }
> +
> + omap_voltage_get_volttable(sr_info->voltdm,
> &volt_data);
> + if (!volt_data) {
> + dev_warn(&pdev->dev, "%s: No Voltage table for
> the"
> + " corresponding vdd vdd_%s. Cannot create
> debugfs"
> + "entries for n-values\n",
> + __func__, sr_info->voltdm->name);
> + return -ENODATA;
> + }
> +
> + for (i = 0; i < sr_info->nvalue_count; i++) {
> + char *name;
> + char volt_name[32];
> +
> + name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
> + if (!name) {
> + dev_err(&pdev->dev, "%s: Unable to
> allocate memory"
> + " for n-value directory name\n",
> __func__);
> + return -ENOMEM;
> + }
> +
> + strcpy(name, "volt_");
> + sprintf(volt_name, "%d",
> volt_data[i].volt_nominal);
> + strcat(name, volt_name);
> + (void) debugfs_create_x32(name, S_IRUGO |
> S_IWUGO, nvalue_dir,
> + &(sr_info->nvalue_table[i].nvalue));
> + }
>
> return ret;
>
> diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-
> omap2/voltage.c
> index 875667f..b27fa4f 100644
> --- a/arch/arm/mach-omap2/voltage.c
> +++ b/arch/arm/mach-omap2/voltage.c
> @@ -250,6 +250,47 @@ static void omap3_voltage_write_reg(u32
> val, u16 mod, u8 offset)
> omap2_prm_write_mod_reg(val, mod, offset);
> }
>
> +/* Voltage debugfs support */
Add comment for the function.
> +static int vp_volt_debug_get(void *data, u64 *val)
> +{
> + struct omap_vdd_info *vdd = (struct omap_vdd_info *)
> data;
> + u8 vsel;
> +
> + if (!vdd) {
> + pr_warning("Wrong paramater passed\n");
> + return -EINVAL;
> + }
> +
> + vsel = vdd->read_reg(vdd->vp_reg.prm_mod, vdd-
> >vp_offs.voltage);
> + pr_notice("curr_vsel = %x\n", vsel);
> +
> + if (!vdd->pmic_info->vsel_to_uv) {
> + pr_warning("PMIC function to convert vsel to
> voltage"
> + "in uV not registerd\n");
> + return -EINVAL;
> + }
> +
> + *val = vdd->pmic_info->vsel_to_uv(vsel);
> + return 0;
> +}
> +
Add comment for the function.
> +static int nom_volt_debug_get(void *data, u64 *val)
> +{
> + struct omap_vdd_info *vdd = (struct omap_vdd_info *)
> data;
> +
> + if (!vdd) {
> + pr_warning("Wrong paramater passed\n");
> + return -EINVAL;
> + }
> +
> + *val = omap_voltage_get_nom_volt(&vdd->voltdm);
> +
> + return 0;
> +}
> +
> +DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops,
> vp_volt_debug_get, NULL, "%llu\n");
> +DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops,
> nom_volt_debug_get, NULL,
> + "%llu\n");
> static void vp_latch_vsel(struct omap_vdd_info *vdd)
> {
> u32 vpconfig;
> @@ -349,7 +390,32 @@ static void __init
> vdd_debugfs_init(struct omap_vdd_info *vdd)
> pr_warning("%s: Unable to create debugfs
> directory for"
> " vdd_%s\n", __func__, vdd->voltdm.name);
> vdd->debug_dir = NULL;
> + return;
> }
> +
> + (void) debugfs_create_x16("vp_errorgain", S_IRUGO,
> vdd->debug_dir,
> + &(vdd->vp_reg.vpconfig_errorgain));
> + (void) debugfs_create_x16("vp_smpswaittimemin",
> S_IRUGO,
> + vdd->debug_dir,
> + &(vdd-
> >vp_reg.vstepmin_smpswaittimemin));
> + (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd-
> >debug_dir,
> + &(vdd->vp_reg.vstepmin_stepmin));
> + (void) debugfs_create_x16("vp_smpswaittimemax",
> S_IRUGO,
> + vdd->debug_dir,
> + &(vdd-
> >vp_reg.vstepmax_smpswaittimemax));
> + (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd-
> >debug_dir,
> + &(vdd->vp_reg.vstepmax_stepmax));
> + (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd-
> >debug_dir,
> + &(vdd->vp_reg.vlimitto_vddmax));
> + (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd-
> >debug_dir,
> + &(vdd->vp_reg.vlimitto_vddmin));
> + (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd-
> >debug_dir,
> + &(vdd->vp_reg.vlimitto_timeout));
> + (void) debugfs_create_file("curr_vp_volt", S_IRUGO,
> vdd->debug_dir,
> + (void *) vdd, &vp_volt_debug_fops);
> + (void) debugfs_create_file("curr_nominal_volt",
> S_IRUGO,
> + vdd->debug_dir, (void *) vdd,
> + &nom_volt_debug_fops);
Recommend to add support for vc cmdval & vc bypass_val.
Best Regards,
Anand Sawant
> }
>
> /* Voltage scale and accessory APIs */
> --
> 1.7.0.4
More information about the linux-arm-kernel
mailing list