[PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
Santosh Shilimkar
santosh.shilimkar at ti.com
Thu Dec 16 23:48:39 EST 2010
> -----Original Message-----
> From: linux-omap-owner at vger.kernel.org [mailto:linux-omap-
> owner at vger.kernel.org] On Behalf Of jean.pihet at newoldbits.com
> Sent: Thursday, December 16, 2010 11:21 PM
> To: linux-omap at vger.kernel.org
> Cc: khilman at deeprootsystems.com; linux-arm-kernel at lists.infradead.org;
> Jean Pihet
> Subject: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
>
> From: Jean Pihet <j-pihet at ti.com>
>
> The SRAM PA addresses are locally defined and used in both the
> SRAM management code and the idle sleep code.
> A global macro defines the values at a centralized place, for
> easier maintenance.
>
> Tested on N900 and Beagleboard with full RET and OFF modes,
> using cpuidle and suspend.
>
> Signed-off-by: Jean Pihet <j-pihet at ti.com>
> ---
> arch/arm/mach-omap2/sdrc.h | 7 +++++++
> arch/arm/plat-omap/sram.c | 7 ++-----
> 2 files changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
> index 68f57bb..ada596b 100644
> --- a/arch/arm/mach-omap2/sdrc.h
> +++ b/arch/arm/mach-omap2/sdrc.h
> @@ -74,5 +74,12 @@ static inline u32 sms_read_reg(u16 reg)
> */
> #define SDRC_MPURATE_LOOPS 96
>
> +/*
> + * OMAP2+: define the SRAM PA addresses.
> + * Used by the SRAM management code and the idle sleep code.
> + */
> +#define OMAP2_SRAM_PA 0x40200000
> +#define OMAP3_SRAM_PA 0x40200000
> +#define OMAP4_SRAM_PA 0x40300000
>
Header choice is wrong. Certainly SDRC is not the place.
Right place should be "#include <plat/sram.h>"
OMAP4 doesn't even have SDRC IP
> #endif
> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
> index 819ea0c..1a686c8 100644
> --- a/arch/arm/plat-omap/sram.c
> +++ b/arch/arm/plat-omap/sram.c
> @@ -41,15 +41,12 @@
>
> #define OMAP1_SRAM_PA 0x20000000
> #define OMAP1_SRAM_VA VMALLOC_END
> -#define OMAP2_SRAM_PA 0x40200000
> -#define OMAP2_SRAM_PUB_PA 0x4020f800
> +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
> #define OMAP2_SRAM_VA 0xfe400000
> #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
> -#define OMAP3_SRAM_PA 0x40200000
> #define OMAP3_SRAM_VA 0xfe400000
> -#define OMAP3_SRAM_PUB_PA 0x40208000
> +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
> #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
> -#define OMAP4_SRAM_PA 0x40300000
> #define OMAP4_SRAM_VA 0xfe400000
> #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
> #define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list