[PATCH] omap: rx51: Remove tvout code that plays with gpio 40

Jarkko Nikula jhnikula at gmail.com
Tue Dec 21 12:46:01 EST 2010


Commit 60d24ee "Added video data to support tvout on rx51" added code that
tries to assign gpio 40 as OMAP DSS reset_gpio for tvout. This is wrong
since this gpio has nothing to do with OMAP DSS but it is used to control
one switch that selects is the audio jack connected to tvout or audio
circuitry.

This switch is already supported by the RX51 ASoC driver so there is no need
to control it elsewhere. Switch is contolled with ALSA control
'Jack Function' and tvout can be selected with following example:

	amixer -D hw:0 set 'Jack Function' 'TV-OUT'

Signed-off-by: Jarkko Nikula <jhnikula at gmail.com>
Cc: Srikar <ext-srikar.1.bhavanarayana at nokia.com>
---
 arch/arm/mach-omap2/board-rx51-video.c |   20 --------------------
 1 files changed, 0 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 9919581..acd6700 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -24,9 +24,6 @@
 #include "mux.h"
 
 #define RX51_LCD_RESET_GPIO	90
-/* REVISIT  to verify with rx51.c at sound/soc/omap */
-#define RX51_TVOUT_SEL_GPIO	40
-
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
 
@@ -41,17 +38,6 @@ static void rx51_lcd_disable(struct omap_dss_device *dssdev)
 	gpio_set_value(dssdev->reset_gpio, 0);
 }
 
-static int rx51_tvout_enable(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void rx51_tvout_disable(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 0);
-}
-
 static struct omap_dss_device rx51_lcd_device = {
 	.name			= "lcd",
 	.driver_name		= "panel-acx565akm",
@@ -67,9 +53,6 @@ static struct omap_dss_device  rx51_tv_device = {
 	.type			= OMAP_DISPLAY_TYPE_VENC,
 	.driver_name		= "venc",
 	.phy.venc.type	        = OMAP_DSS_VENC_TYPE_COMPOSITE,
-	.reset_gpio	        = RX51_TVOUT_SEL_GPIO,
-	.platform_enable        = rx51_tvout_enable,
-	.platform_disable       = rx51_tvout_disable,
 };
 
 static struct omap_dss_device *rx51_dss_devices[] = {
@@ -112,9 +95,6 @@ static int __init rx51_video_init(void)
 
 	gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
 
-	/* REVISIT  to verify with rx51.c at sound/soc/omap */
-	gpio_direction_output(RX51_TVOUT_SEL_GPIO, 1);
-
 	platform_add_devices(rx51_video_devices,
 				ARRAY_SIZE(rx51_video_devices));
 	return 0;
-- 
1.7.2.3




More information about the linux-arm-kernel mailing list