[PATCH 5/5] msm: add SMP support for msm
Jeff Ohlstein
johlstei at codeaurora.org
Mon Dec 6 02:16:18 EST 2010
Signed-off-by: Jeff Ohlstein <johlstei at codeaurora.org>
---
arch/arm/mach-msm/Kconfig | 1 +
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/headsmp.S | 43 ++++++++++
arch/arm/mach-msm/include/mach/smp.h | 2 +
arch/arm/mach-msm/platsmp.c | 147 ++++++++++++++++++++++++++++++++++
5 files changed, 194 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-msm/headsmp.S
create mode 100644 arch/arm/mach-msm/platsmp.c
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ab5338f..8c57425 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -40,6 +40,7 @@ config ARCH_MSM8X60
bool "MSM8X60"
select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
&& !MACH_MSM8X60_FFA)
+ select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 7a11b4a..1945f9c 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S
new file mode 100644
index 0000000..438cfeb
--- /dev/null
+++ b/arch/arm/mach-msm/headsmp.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/*
+ * MSM specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ *
+ * This is executing in physical space with cache's off.
+ */
+ENTRY(msm_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5 @ MPIDR
+ and r0, r0, #15 @ What CPU am I
+ adr r4, 1f @ address of
+ ldmia r4, {r5, r6} @ load curr addr and pen_rel addr
+ sub r4, r4, r5 @ determine virtual/phys offsets
+ add r6, r6, r4 @ apply
+pen:
+ wfe
+ dsb @ ensure subsequent access is
+ @ after event
+
+ ldr r7, [r6] @ pen_rel has cpu to remove from reset
+ cmp r7, r0 @ are we lucky?
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+1: .long .
+ .long pen_release
diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h
index 3ff7bf5..79f94b0 100644
--- a/arch/arm/mach-msm/include/mach/smp.h
+++ b/arch/arm/mach-msm/include/mach/smp.h
@@ -36,4 +36,6 @@ static inline void smp_cross_call(const struct cpumask *mask)
gic_raise_softirq(mask, 1);
}
+extern int pen_release;
+extern void msm_secondary_startup(void);
#endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
new file mode 100644
index 0000000..fbce6de
--- /dev/null
+++ b/arch/arm/mach-msm/platsmp.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
+
+#include <mach/smp.h>
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+#include "scm-boot.h"
+
+#define SECONDARY_CPU_WAIT_MS 10
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
+#define SCSS_CPU1CORE_RESET 0xD80
+#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
+
+int pen_release = -1;
+
+int get_core_count(void)
+{
+#ifdef CONFIG_NR_CPUS
+ return CONFIG_NR_CPUS;
+#else
+ return 1;
+#endif
+}
+
+/* Initialize the present map (set_cpu_present(i, true)). */
+void smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+ unsigned int cpu = smp_processor_id();
+
+ smp_store_cpu_info(cpu);
+
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+}
+
+void smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+static void prepare_cold_cpu(unsigned int cpu)
+{
+ int ret;
+ ret = scm_set_boot_addr((void *)
+ virt_to_phys(msm_secondary_startup),
+ SCM_FLAG_COLDBOOT_CPU1);
+ if (ret == 0) {
+ void *sc1_base_ptr;
+ sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
+ if (sc1_base_ptr) {
+ writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+ writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
+ writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
+ iounmap(sc1_base_ptr);
+ }
+ } else
+ printk(KERN_DEBUG "Failed to set secondary core boot "
+ "address\n");
+}
+
+/* Executed by primary CPU, brings other CPUs out of reset. Called at boot
+ as well as when a CPU is coming out of shutdown induced by echo 0 >
+ /sys/devices/.../cpuX.
+*/
+int boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ static int cold_boot_done;
+ int cnt = 0;
+ printk(KERN_DEBUG "Starting secondary CPU %d\n", cpu);
+
+ if (cold_boot_done == false) {
+ prepare_cold_cpu(cpu);
+ cold_boot_done = true;
+ }
+
+ pen_release = cpu;
+ dmac_flush_range((void *)&pen_release,
+ (void *)(&pen_release + sizeof(pen_release)));
+ __asm__("sev");
+ dsb();
+
+ /* Use smp_cross_call() to send a soft interrupt to wake up
+ * the other core.
+ */
+ smp_cross_call(cpumask_of(cpu));
+
+ while (pen_release != 0xFFFFFFFF) {
+ smp_rmb();
+ msleep_interruptible(1);
+ if (cnt++ >= SECONDARY_CPU_WAIT_MS)
+ break;
+ }
+
+ return 0;
+}
+
+/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
+#define GIC_PPI_EDGE_MASK 0xFFFFD7FF
+
+/* Initialization routine for secondary CPUs after they are brought out of
+ * reset.
+*/
+void platform_secondary_init(unsigned int cpu)
+{
+ printk(KERN_DEBUG "%s: cpu:%d\n", __func__, cpu);
+
+ trace_hardirqs_off();
+
+ writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
+
+ /* RUMI does not adhere to GIC spec by enabling STIs by default.
+ * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
+ */
+ if (!machine_is_msm8x60_sim())
+ writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
+
+ /*
+ * setup GIC (GIC number NOT CPU number and the base address of the
+ * GIC CPU interface
+ */
+ gic_cpu_init(0, MSM_QGIC_CPU_BASE);
+ pen_release = -1;
+ smp_wmb();
+}
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
More information about the linux-arm-kernel
mailing list