[PATCH v2 5/8] arm: mxc: move IOMUX_CONFIG_XXXX definitions to iomux-v3.h

Richard Zhao richard.zhao at freescale.com
Wed Dec 29 02:30:27 EST 2010


Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
---
 arch/arm/plat-mxc/include/mach/iomux-mx51.h |   16 ----------------
 arch/arm/plat-mxc/include/mach/iomux-mx53.h |   16 ----------------
 arch/arm/plat-mxc/include/mach/iomux-v3.h   |   15 +++++++++++++++
 3 files changed, 15 insertions(+), 32 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index e1600f3..31af1f5 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -15,22 +15,6 @@
 
 #include <mach/iomux-v3.h>
 
-/*
- * various IOMUX alternate output functions (1-7)
- */
-typedef enum iomux_config {
-	IOMUX_CONFIG_ALT0,
-	IOMUX_CONFIG_ALT1,
-	IOMUX_CONFIG_ALT2,
-	IOMUX_CONFIG_ALT3,
-	IOMUX_CONFIG_ALT4,
-	IOMUX_CONFIG_ALT5,
-	IOMUX_CONFIG_ALT6,
-	IOMUX_CONFIG_ALT7,
-	IOMUX_CONFIG_GPIO,      /* added to help user use GPIO mode */
-	IOMUX_CONFIG_SION = 0x1 << 4,   /* LOOPBACK:MUX SION bit */
-} iomux_pin_cfg_t;
-
 /* Pad control groupings */
 #define MX51_UART1_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
 				PAD_CTL_DSE_HIGH)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 80cb3c5..4155124 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -21,22 +21,6 @@
 
 #include <mach/iomux-v3.h>
 
-/*
- * various IOMUX alternate output functions (1-7)
- */
-typedef enum iomux_config {
-	IOMUX_CONFIG_ALT0,
-	IOMUX_CONFIG_ALT1,
-	IOMUX_CONFIG_ALT2,
-	IOMUX_CONFIG_ALT3,
-	IOMUX_CONFIG_ALT4,
-	IOMUX_CONFIG_ALT5,
-	IOMUX_CONFIG_ALT6,
-	IOMUX_CONFIG_ALT7,
-	IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
-	IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
-} iomux_pin_cfg_t;
-
 /* These 2 defines are for pins that may not have a mux register, but could
  * have a pad setting register, and vice-versa. */
 #define NON_MUX_I	0x00
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 811716f..e1fd71b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -54,6 +54,21 @@ typedef struct deprecated_pad_desc {
 	unsigned select_input:3;
 } iomux_v3_cfg_t;
 
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+enum iomux_config {
+	IOMUX_CONFIG_ALT0,
+	IOMUX_CONFIG_ALT1,
+	IOMUX_CONFIG_ALT2,
+	IOMUX_CONFIG_ALT3,
+	IOMUX_CONFIG_ALT4,
+	IOMUX_CONFIG_ALT5,
+	IOMUX_CONFIG_ALT6,
+	IOMUX_CONFIG_ALT7,
+	IOMUX_CONFIG_SION = 0x1 << 4,	/* LOOPBACK:MUX SION bit */
+};
+
 static inline unsigned int MUX_CTRL_OFS(iomux_v3_cfg_t *pad)
 {
 	return pad->mux_ctrl_ofs;
-- 
1.6.3.3





More information about the linux-arm-kernel mailing list