[PATCH v7 06/12] regulator: add driver for tps6524x regulator
Cyril Chemparathy
cyril at ti.com
Tue Dec 7 09:51:56 EST 2010
TPS6524X provides three step-down converters and two general-purpose LDO
voltage regulators. This device is interfaced using SPI.
Acked-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
Signed-off-by: Cyril Chemparathy <cyril at ti.com>
---
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/tps6524x-regulator.c | 692 ++++++++++++++++++++++++++++++++
3 files changed, 703 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/tps6524x-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index dd30e88..da34981 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -250,5 +250,15 @@ config REGULATOR_TPS6586X
help
This driver supports TPS6586X voltage regulator chips.
+config REGULATOR_TPS6524X
+ tristate "TI TPS6524X Power regulators"
+ depends on SPI
+ help
+ This driver supports TPS6524X voltage regulator chips. TPS6524X
+ provides three step-down converters and two general-purpose LDO
+ voltage regulators. This device is interfaced using a customized
+ serial interface currently supported on the sequencer serial
+ port controller.
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bff8157..cf71df7 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
new file mode 100644
index 0000000..dea1260
--- /dev/null
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -0,0 +1,692 @@
+/*
+ * Regulator driver for TPS6524x PMIC
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define REG_LDO_SET 0x0
+#define LDO_ILIM_MASK 1 /* 0 = 400-800, 1 = 900-1500 */
+#define LDO_VSEL_MASK 0x0f
+#define LDO2_ILIM_SHIFT 12
+#define LDO2_VSEL_SHIFT 4
+#define LDO1_ILIM_SHIFT 8
+#define LDO1_VSEL_SHIFT 0
+
+#define REG_BLOCK_EN 0x1
+#define BLOCK_MASK 1
+#define BLOCK_LDO1_SHIFT 0
+#define BLOCK_LDO2_SHIFT 1
+#define BLOCK_LCD_SHIFT 2
+#define BLOCK_USB_SHIFT 3
+
+#define REG_DCDC_SET 0x2
+#define DCDC_VDCDC_MASK 0x1f
+#define DCDC_VDCDC1_SHIFT 0
+#define DCDC_VDCDC2_SHIFT 5
+#define DCDC_VDCDC3_SHIFT 10
+
+#define REG_DCDC_EN 0x3
+#define DCDCDCDC_EN_MASK 0x1
+#define DCDCDCDC1_EN_SHIFT 0
+#define DCDCDCDC1_PG_MSK BIT(1)
+#define DCDCDCDC2_EN_SHIFT 2
+#define DCDCDCDC2_PG_MSK BIT(3)
+#define DCDCDCDC3_EN_SHIFT 4
+#define DCDCDCDC3_PG_MSK BIT(5)
+
+#define REG_USB 0x4
+#define USB_ILIM_SHIFT 0
+#define USB_ILIM_MASK 0x3
+#define USB_TSD_SHIFT 2
+#define USB_TSD_MASK 0x3
+#define USB_TWARN_SHIFT 4
+#define USB_TWARN_MASK 0x3
+#define USB_IWARN_SD BIT(6)
+#define USB_FAST_LOOP BIT(7)
+
+#define REG_ALARM 0x5
+#define ALARM_LDO1 BIT(0)
+#define ALARM_DCDC1 BIT(1)
+#define ALARM_DCDC2 BIT(2)
+#define ALARM_DCDC3 BIT(3)
+#define ALARM_LDO2 BIT(4)
+#define ALARM_USB_WARN BIT(5)
+#define ALARM_USB_ALARM BIT(6)
+#define ALARM_LCD BIT(9)
+#define ALARM_TEMP_WARM BIT(10)
+#define ALARM_TEMP_HOT BIT(11)
+#define ALARM_NRST BIT(14)
+#define ALARM_POWERUP BIT(15)
+
+#define REG_INT_ENABLE 0x6
+#define INT_LDO1 BIT(0)
+#define INT_DCDC1 BIT(1)
+#define INT_DCDC2 BIT(2)
+#define INT_DCDC3 BIT(3)
+#define INT_LDO2 BIT(4)
+#define INT_USB_WARN BIT(5)
+#define INT_USB_ALARM BIT(6)
+#define INT_LCD BIT(9)
+#define INT_TEMP_WARM BIT(10)
+#define INT_TEMP_HOT BIT(11)
+#define INT_GLOBAL_EN BIT(15)
+
+#define REG_INT_STATUS 0x7
+#define STATUS_LDO1 BIT(0)
+#define STATUS_DCDC1 BIT(1)
+#define STATUS_DCDC2 BIT(2)
+#define STATUS_DCDC3 BIT(3)
+#define STATUS_LDO2 BIT(4)
+#define STATUS_USB_WARN BIT(5)
+#define STATUS_USB_ALARM BIT(6)
+#define STATUS_LCD BIT(9)
+#define STATUS_TEMP_WARM BIT(10)
+#define STATUS_TEMP_HOT BIT(11)
+
+#define REG_SOFTWARE_RESET 0xb
+#define REG_WRITE_ENABLE 0xd
+#define REG_REV_ID 0xf
+
+#define N_DCDC 3
+#define N_LDO 2
+#define N_SWITCH 2
+#define N_REGULATORS (3 /* DCDC */ + \
+ 2 /* LDO */ + \
+ 2 /* switch */)
+
+#define FIXED_ILIMSEL BIT(0)
+#define FIXED_VOLTAGE BIT(1)
+
+#define CMD_READ(reg) ((reg) << 6)
+#define CMD_WRITE(reg) (BIT(5) | (reg) << 6)
+#define STAT_CLK BIT(3)
+#define STAT_WRITE BIT(2)
+#define STAT_INVALID BIT(1)
+#define STAT_WP BIT(0)
+
+struct field {
+ int reg;
+ int shift;
+ int mask;
+};
+
+struct supply_info {
+ const char *name;
+ int n_voltages;
+ const int *voltages;
+ int fixed_voltage;
+ int n_ilimsels;
+ const int *ilimsels;
+ int fixed_ilimsel;
+ int flags;
+ struct field enable, voltage, ilimsel;
+};
+
+struct tps6524x {
+ struct device *dev;
+ struct spi_device *spi;
+ struct mutex lock;
+ struct regulator_desc desc[N_REGULATORS];
+ struct regulator_dev *rdev[N_REGULATORS];
+};
+
+static int __read_reg(struct tps6524x *hw, int reg)
+{
+ int error = 0;
+ u16 cmd = CMD_READ(reg), in;
+ u8 status;
+ struct spi_message m;
+ struct spi_transfer t[3];
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = &cmd;
+ t[0].len = 2;
+ t[0].bits_per_word = 12;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = ∈
+ t[1].len = 2;
+ t[1].bits_per_word = 16;
+ spi_message_add_tail(&t[1], &m);
+
+ t[2].rx_buf = &status;
+ t[2].len = 1;
+ t[2].bits_per_word = 4;
+ spi_message_add_tail(&t[2], &m);
+
+ error = spi_sync(hw->spi, &m);
+ if (error < 0)
+ return error;
+
+ dev_dbg(hw->dev, "read reg %d, data %x, status %x\n",
+ reg, in, status);
+
+ if (!(status & STAT_CLK) || (status & STAT_WRITE))
+ return -EIO;
+
+ if (status & STAT_INVALID)
+ return -EINVAL;
+
+ return in;
+}
+
+static int read_reg(struct tps6524x *hw, int reg)
+{
+ int ret;
+
+ mutex_lock(&hw->lock);
+ ret = __read_reg(hw, reg);
+ mutex_unlock(&hw->lock);
+
+ return ret;
+}
+
+static int __write_reg(struct tps6524x *hw, int reg, int val)
+{
+ int error = 0;
+ u16 cmd = CMD_WRITE(reg), out = val;
+ u8 status;
+ struct spi_message m;
+ struct spi_transfer t[3];
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = &cmd;
+ t[0].len = 2;
+ t[0].bits_per_word = 12;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = &out;
+ t[1].len = 2;
+ t[1].bits_per_word = 16;
+ spi_message_add_tail(&t[1], &m);
+
+ t[2].rx_buf = &status;
+ t[2].len = 1;
+ t[2].bits_per_word = 4;
+ spi_message_add_tail(&t[2], &m);
+
+ error = spi_sync(hw->spi, &m);
+ if (error < 0)
+ return error;
+
+ dev_dbg(hw->dev, "wrote reg %d, data %x, status %x\n",
+ reg, out, status);
+
+ if (!(status & STAT_CLK) || !(status & STAT_WRITE))
+ return -EIO;
+
+ if (status & (STAT_INVALID | STAT_WP))
+ return -EINVAL;
+
+ return error;
+}
+
+static int __rmw_reg(struct tps6524x *hw, int reg, int mask, int val)
+{
+ int ret;
+
+ ret = __read_reg(hw, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~mask;
+ ret |= val;
+
+ ret = __write_reg(hw, reg, ret);
+
+ return (ret < 0) ? ret : 0;
+}
+
+static int rmw_protect(struct tps6524x *hw, int reg, int mask, int val)
+{
+ int ret;
+
+ mutex_lock(&hw->lock);
+
+ ret = __write_reg(hw, REG_WRITE_ENABLE, 1);
+ if (ret) {
+ dev_err(hw->dev, "failed to set write enable\n");
+ goto error;
+ }
+
+ ret = __rmw_reg(hw, reg, mask, val);
+ if (ret)
+ dev_err(hw->dev, "failed to rmw register %d\n", reg);
+
+ ret = __write_reg(hw, REG_WRITE_ENABLE, 0);
+ if (ret) {
+ dev_err(hw->dev, "failed to clear write enable\n");
+ goto error;
+ }
+
+error:
+ mutex_unlock(&hw->lock);
+
+ return ret;
+}
+
+static int read_field(struct tps6524x *hw, const struct field *field)
+{
+ int tmp;
+
+ tmp = read_reg(hw, field->reg);
+ if (tmp < 0)
+ return tmp;
+
+ return (tmp >> field->shift) & field->mask;
+}
+
+static int write_field(struct tps6524x *hw, const struct field *field,
+ int val)
+{
+ if (val & ~field->mask)
+ return -EOVERFLOW;
+
+ return rmw_protect(hw, field->reg,
+ field->mask << field->shift,
+ val << field->shift);
+}
+
+static const int dcdc1_voltages[] = {
+ 800000, 825000, 850000, 875000,
+ 900000, 925000, 950000, 975000,
+ 1000000, 1025000, 1050000, 1075000,
+ 1100000, 1125000, 1150000, 1175000,
+ 1200000, 1225000, 1250000, 1275000,
+ 1300000, 1325000, 1350000, 1375000,
+ 1400000, 1425000, 1450000, 1475000,
+ 1500000, 1525000, 1550000, 1575000,
+};
+
+static const int dcdc2_voltages[] = {
+ 1400000, 1450000, 1500000, 1550000,
+ 1600000, 1650000, 1700000, 1750000,
+ 1800000, 1850000, 1900000, 1950000,
+ 2000000, 2050000, 2100000, 2150000,
+ 2200000, 2250000, 2300000, 2350000,
+ 2400000, 2450000, 2500000, 2550000,
+ 2600000, 2650000, 2700000, 2750000,
+ 2800000, 2850000, 2900000, 2950000,
+};
+
+static const int dcdc3_voltages[] = {
+ 2400000, 2450000, 2500000, 2550000, 2600000,
+ 2650000, 2700000, 2750000, 2800000, 2850000,
+ 2900000, 2950000, 3000000, 3050000, 3100000,
+ 3150000, 3200000, 3250000, 3300000, 3350000,
+ 3400000, 3450000, 3500000, 3550000, 3600000,
+};
+
+static const int ldo1_voltages[] = {
+ 4300000, 4350000, 4400000, 4450000,
+ 4500000, 4550000, 4600000, 4650000,
+ 4700000, 4750000, 4800000, 4850000,
+ 4900000, 4950000, 5000000, 5050000,
+};
+
+static const int ldo2_voltages[] = {
+ 1100000, 1150000, 1200000, 1250000,
+ 1300000, 1700000, 1750000, 1800000,
+ 1850000, 1900000, 3150000, 3200000,
+ 3250000, 3300000, 3350000, 3400000,
+};
+
+static const int ldo_ilimsel[] = {
+ 400000, 1500000
+};
+
+static const int usb_ilimsel[] = {
+ 200000, 400000, 800000, 1000000
+};
+
+#define __MK_FIELD(_reg, _mask, _shift) \
+ { .reg = (_reg), .mask = (_mask), .shift = (_shift), }
+
+static const struct supply_info supply_info[N_REGULATORS] = {
+ {
+ .name = "DCDC1",
+ .flags = FIXED_ILIMSEL,
+ .n_voltages = ARRAY_SIZE(dcdc1_voltages),
+ .voltages = dcdc1_voltages,
+ .fixed_ilimsel = 2400000,
+ .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
+ DCDCDCDC1_EN_SHIFT),
+ .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
+ DCDC_VDCDC1_SHIFT),
+ },
+ {
+ .name = "DCDC2",
+ .flags = FIXED_ILIMSEL,
+ .n_voltages = ARRAY_SIZE(dcdc2_voltages),
+ .voltages = dcdc2_voltages,
+ .fixed_ilimsel = 1200000,
+ .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
+ DCDCDCDC2_EN_SHIFT),
+ .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
+ DCDC_VDCDC2_SHIFT),
+ },
+ {
+ .name = "DCDC3",
+ .flags = FIXED_ILIMSEL,
+ .n_voltages = ARRAY_SIZE(dcdc3_voltages),
+ .voltages = dcdc3_voltages,
+ .fixed_ilimsel = 1200000,
+ .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
+ DCDCDCDC3_EN_SHIFT),
+ .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
+ DCDC_VDCDC3_SHIFT),
+ },
+ {
+ .name = "LDO1",
+ .n_voltages = ARRAY_SIZE(ldo1_voltages),
+ .voltages = ldo1_voltages,
+ .n_ilimsels = ARRAY_SIZE(ldo_ilimsel),
+ .ilimsels = ldo_ilimsel,
+ .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+ BLOCK_LDO1_SHIFT),
+ .voltage = __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK,
+ LDO1_VSEL_SHIFT),
+ .ilimsel = __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK,
+ LDO1_ILIM_SHIFT),
+ },
+ {
+ .name = "LDO2",
+ .n_voltages = ARRAY_SIZE(ldo2_voltages),
+ .voltages = ldo2_voltages,
+ .n_ilimsels = ARRAY_SIZE(ldo_ilimsel),
+ .ilimsels = ldo_ilimsel,
+ .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+ BLOCK_LDO2_SHIFT),
+ .voltage = __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK,
+ LDO2_VSEL_SHIFT),
+ .ilimsel = __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK,
+ LDO2_ILIM_SHIFT),
+ },
+ {
+ .name = "USB",
+ .flags = FIXED_VOLTAGE,
+ .fixed_voltage = 5000000,
+ .n_ilimsels = ARRAY_SIZE(usb_ilimsel),
+ .ilimsels = usb_ilimsel,
+ .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+ BLOCK_USB_SHIFT),
+ .ilimsel = __MK_FIELD(REG_USB, USB_ILIM_MASK,
+ USB_ILIM_SHIFT),
+ },
+ {
+ .name = "LCD",
+ .flags = FIXED_VOLTAGE | FIXED_ILIMSEL,
+ .fixed_voltage = 5000000,
+ .fixed_ilimsel = 400000,
+ .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+ BLOCK_LCD_SHIFT),
+ },
+};
+
+static int list_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+ const struct supply_info *info;
+ struct tps6524x *hw;
+
+ hw = rdev_get_drvdata(rdev);
+ info = &supply_info[rdev_get_id(rdev)];
+
+ if (info->flags & FIXED_VOLTAGE)
+ return selector ? -EINVAL : info->fixed_voltage;
+
+ if (selector < 0 || selector >= info->n_voltages)
+ return -EINVAL;
+
+ return info->voltages[selector];
+}
+
+static int set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+ const struct supply_info *info;
+ struct tps6524x *hw;
+ int i;
+
+ hw = rdev_get_drvdata(rdev);
+ info = &supply_info[rdev_get_id(rdev)];
+
+ if (info->flags & FIXED_VOLTAGE)
+ return -EINVAL;
+
+ for (i = 0; i < info->n_voltages; i++)
+ if (min_uV <= info->voltages[i] &&
+ max_uV >= info->voltages[i])
+ break;
+
+ if (i >= info->n_voltages)
+ return -EINVAL;
+
+ return write_field(hw, &info->voltage, i);
+}
+
+static int get_voltage(struct regulator_dev *rdev)
+{
+ const struct supply_info *info;
+ struct tps6524x *hw;
+ int ret;
+
+ hw = rdev_get_drvdata(rdev);
+ info = &supply_info[rdev_get_id(rdev)];
+
+ if (info->flags & FIXED_VOLTAGE)
+ return info->fixed_voltage;
+
+ ret = read_field(hw, &info->voltage);
+ if (ret < 0)
+ return ret;
+ if (WARN_ON(ret >= info->n_voltages))
+ return -EIO;
+
+ return info->voltages[ret];
+}
+
+static int set_current_limit(struct regulator_dev *rdev, int min_uA,
+ int max_uA)
+{
+ const struct supply_info *info;
+ struct tps6524x *hw;
+ int i;
+
+ hw = rdev_get_drvdata(rdev);
+ info = &supply_info[rdev_get_id(rdev)];
+
+ if (info->flags & FIXED_ILIMSEL)
+ return -EINVAL;
+
+ for (i = 0; i < info->n_ilimsels; i++)
+ if (min_uA <= info->ilimsels[i] &&
+ max_uA >= info->ilimsels[i])
+ break;
+
+ if (i >= info->n_ilimsels)
+ return -EINVAL;
+
+ return write_field(hw, &info->ilimsel, i);
+}
+
+static int get_current_limit(struct regulator_dev *rdev)
+{
+ const struct supply_info *info;
+ struct tps6524x *hw;
+ int ret;
+
+ hw = rdev_get_drvdata(rdev);
+ info = &supply_info[rdev_get_id(rdev)];
+
+ if (info->flags & FIXED_ILIMSEL)
+ return info->fixed_ilimsel;
+
+ ret = read_field(hw, &info->ilimsel);
+ if (ret < 0)
+ return ret;
+ if (WARN_ON(ret >= info->n_ilimsels))
+ return -EIO;
+
+ return info->ilimsels[ret];
+}
+
+static int enable_supply(struct regulator_dev *rdev)
+{
+ const struct supply_info *info;
+ struct tps6524x *hw;
+
+ hw = rdev_get_drvdata(rdev);
+ info = &supply_info[rdev_get_id(rdev)];
+
+ return write_field(hw, &info->enable, 1);
+}
+
+static int disable_supply(struct regulator_dev *rdev)
+{
+ const struct supply_info *info;
+ struct tps6524x *hw;
+
+ hw = rdev_get_drvdata(rdev);
+ info = &supply_info[rdev_get_id(rdev)];
+
+ return write_field(hw, &info->enable, 0);
+}
+
+static int is_supply_enabled(struct regulator_dev *rdev)
+{
+ const struct supply_info *info;
+ struct tps6524x *hw;
+
+ hw = rdev_get_drvdata(rdev);
+ info = &supply_info[rdev_get_id(rdev)];
+
+ return read_field(hw, &info->enable);
+}
+
+static struct regulator_ops regulator_ops = {
+ .is_enabled = is_supply_enabled,
+ .enable = enable_supply,
+ .disable = disable_supply,
+ .get_voltage = get_voltage,
+ .set_voltage = set_voltage,
+ .list_voltage = list_voltage,
+ .set_current_limit = set_current_limit,
+ .get_current_limit = get_current_limit,
+};
+
+static int __devexit pmic_remove(struct spi_device *spi)
+{
+ struct tps6524x *hw = spi_get_drvdata(spi);
+ int i;
+
+ if (!hw)
+ return 0;
+ for (i = 0; i < N_REGULATORS; i++) {
+ if (hw->rdev[i])
+ regulator_unregister(hw->rdev[i]);
+ hw->rdev[i] = NULL;
+ }
+ spi_set_drvdata(spi, NULL);
+ kfree(hw);
+ return 0;
+}
+
+static int __devinit pmic_probe(struct spi_device *spi)
+{
+ struct tps6524x *hw;
+ struct device *dev = &spi->dev;
+ const struct supply_info *info = supply_info;
+ struct regulator_init_data *init_data;
+ int ret = 0, i;
+
+ init_data = dev->platform_data;
+ if (!init_data) {
+ dev_err(dev, "could not find regulator platform data\n");
+ return -EINVAL;
+ }
+
+ hw = kzalloc(sizeof(struct tps6524x), GFP_KERNEL);
+ if (!hw) {
+ dev_err(dev, "cannot allocate regulator private data\n");
+ return -ENOMEM;
+ }
+ spi_set_drvdata(spi, hw);
+
+ memset(hw, 0, sizeof(struct tps6524x));
+ hw->dev = dev;
+ hw->spi = spi_dev_get(spi);
+ mutex_init(&hw->lock);
+
+ for (i = 0; i < N_REGULATORS; i++, info++, init_data++) {
+ hw->desc[i].name = info->name;
+ hw->desc[i].id = i;
+ hw->desc[i].n_voltages = info->n_voltages;
+ hw->desc[i].ops = ®ulator_ops;
+ hw->desc[i].type = REGULATOR_VOLTAGE;
+ hw->desc[i].owner = THIS_MODULE;
+
+ if (info->flags & FIXED_VOLTAGE)
+ hw->desc[i].n_voltages = 1;
+
+ hw->rdev[i] = regulator_register(&hw->desc[i], dev,
+ init_data, hw);
+ if (IS_ERR(hw->rdev[i])) {
+ ret = PTR_ERR(hw->rdev[i]);
+ hw->rdev[i] = NULL;
+ goto fail;
+ }
+ }
+
+ return 0;
+
+fail:
+ pmic_remove(spi);
+ return ret;
+}
+
+static struct spi_driver pmic_driver = {
+ .probe = pmic_probe,
+ .remove = __devexit_p(pmic_remove),
+ .driver = {
+ .name = "tps6524x",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pmic_driver_init(void)
+{
+ return spi_register_driver(&pmic_driver);
+}
+module_init(pmic_driver_init);
+
+static void __exit pmic_driver_exit(void)
+{
+ spi_unregister_driver(&pmic_driver);
+}
+module_exit(pmic_driver_exit);
+
+MODULE_DESCRIPTION("TPS6524X PMIC Driver");
+MODULE_AUTHOR("Cyril Chemparathy");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:tps6524x");
--
1.7.1
More information about the linux-arm-kernel
mailing list